Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Crystallization and Phase Transformations of Aluminum (Oxy)hydroxide Polymorphs in Caustic Aqueous Solution

Gibbsite, bayerite, and boehmite are important aluminum (oxy)hydroxide minerals in nature and have been widely deployed in various industrial applications. They are also major components in caustic nuclear wastes stored at various U.S. locations. Knowledge of their crystallization and phase transformation processes contributes to understanding their occurrence and could help optimize waste treatment processes. While it has been reported that partial conversion of bayerite and gibbsite to boehmite occurs in basic solutions at elevated temperatures, systematic studies of factors affecting the phase transformation as well as the underlying reaction mechanisms are non-existent, particularly in highly alkaline solutions. We explored the effects of sodium hydroxide concentrations (0.1~3 M), reaction temperature (60~100 ?) and aluminum concentrations (0.1~1 M) on the crystallization and transformation of these aluminum (oxy)hydroxides. Detailed structural and morphological characterization by X-ray diffraction (XRD), scanning electron microscopy (SEM), and nuclear magnetic resonance (NMR) spectrometry revealed that these processes depend largely on the reaction temperature and the Al/OH- ratio. When 1 = Al/OH- = 2.5, the reactions favor formation of high crystallinity precipitates, whereas at Al/OH- ratio ? 2.5 precipitation ceases unless the Al concentration is higher than 1 M. We identified pseudoboehmite, bayerite and gibbsite as intermediate phases to bayerite, gibbsite and boehmite, respectively, all of which transform via dissolution-reprecipitation. Gibbsite transforms to boehmite in both acidic and weak caustic environments at temperatures above 80 oC. However, a ‘bar-shaped’ gibbsite morphology dominates in highly caustic environments (3 M NaOH). The findings enable a robust basis for selection of various solid phases by tuning the reaction conditions.

aluminum (oxy)hydroxide polymorphs, crystallizatio↗
DOE OSTI2015

A study on improvement of discharge characteristic by using a transformer in a capacitively coupled plasma

In a plasma discharge system, the power loss at powered line, matching network, and other transmission line can affect the discharge characteristics such as the power transfer efficiency, voltage and current at powered electrode, and plasma density. In this paper, we propose a method to reduce power loss by using a step down transformer mounted between the matching network and the powered electrode in a capacitively coupled argon plasma. This step down transformer decreases the power loss by reducing the current flowing through the matching network and transmission line. As a result, the power transfer efficiency was increased about 5%–10% by using a step down transformer. However, the plasma density was dramatically increased compared to no transformer. This can be understood by the increase in ohmic heating and the decrease in dc-self bias. By simply mounting a transformer, improvement of discharge efficiency can be achieved in capacitively coupled plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

A Discrete Hankel Transform Approach to Nuclear Data Processing for Fusion Applications

This study introduces advancements to the numerical solutions employed in the processing of nuclear data for fusion applications. It leverages the convolution theorem and Fourier transform techniques to enhance computational efficiency and broaden applicability. Building upon a previously reported discrete Hankel transform approach for Doppler broadening, this work refines the solution of convolution integrals central to these applications. The methodology provides a general and unified framework for evaluating any convolution operation, regardless of whether the underlying problem involves temperature effects in nuclear reactions. The applicability to the nuclear data processing for fusion is demonstrated by deriving the convolution integrals for some of the fusion-related quantities. As before, the convolution operation utilizes a Gaussian-based kernel; however, the discrete Hankel transform of order $𝛼$ = $\frac{1}{2}$ is now applied to the forward Fourier transform of the nonkernel argument, rather than the inverse Fourier transform. This modification eliminates the need for the integration of the nonkernel, cross section–based function, which is a step that posed challenges for certain pointwise cross-section representations. It also removes the requirement for cross-section linearization. Optimized for graphics processing unit architectures, the approach significantly improves computational performance. These advancements are currently under evaluation as the foundation for the next-generation thermonuclear data file processing codes being developed at Lawrence Livermore National Laboratory.

Nuclear science and engineering↗
DOE OSTI2015

Optimizing BAO measurements with non-linear transformations of the Lyman-α forest

We explore the effect of applying a non-linear transformation to the Lyman-α forest transmitted flux F=e{sup −τ} and the ability of analytic models to predict the resulting clustering amplitude. Both the large-scale bias of the transformed field (signal) and the amplitude of small scale fluctuations (noise) can be arbitrarily modified, but we were unable to find a transformation that increases significantly the signal-to-noise ratio on large scales using Taylor expansion up to the third order. In particular, however, we achieve a 33% improvement in signal to noise for Gaussianized field in transverse direction. On the other hand, we explore an analytic model for the large-scale biasing of the Lyα forest, and present an extension of this model to describe the biasing of the transformed fields. Using hydrodynamic simulations we show that the model works best to describe the biasing with respect to velocity gradients, but is less successful in predicting the biasing with respect to large-scale density fluctuations, especially for very nonlinear transformations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Role of point defects in stress-induced martensite transformations in NiTi shape memory alloys: A molecular dynamics study

Shape-memory properties of equiatomic NiTi rely on the thermal- or stress-induced reversible martensitic phase transformation between the $\textit{B}$2 and $\textit{B}$19' phases. Irradiation defects suppress thermal-induced transformations, but their effects on stress-induced transformations are poorly understood. In this work, we use molecular dynamics to investigate the effect of vacancies, vacancy clusters, interstitials, and antisite defects on stress-induced transformations. All defects suppress the transformation, but vacancy clusters do so to the greatest extent, while antisite defects do so to the least extent. The responsible mechanisms are grain boundary pinning and chemical disordering.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Predicting kinetics of polymorphic transformations from structure mapping and coordination analysis

To extend materials design and discovery into the space of metastable polymorphs, rapid and reliable assessment of transformation kinetics to lower energy structures is essential. Herein we focus on diffusionless polymorphic transformations and investigate routes to assess their kinetics using solely crystallographic arguments. As part of this investigation we developed a general algorithm to map crystal structures onto each other, and ascertain the low-energy (fast-kinetics) transformation pathways between them. Pathways with minimal dissociation of chemical bonds, along which the number of bonds (in ionic systems the first-shell coordination) does not decrease below that in the end structures, are shown to always be the fast-kinetics pathways. These findings enable the rapid assessment of the kinetics of polymorphic transformation and the identification of long-lived metastable structures. In conclusion, the utility is demonstrated on a number of transformations including those between high-pressure SnO 2 phases, which lack a detailed atomic-level understanding.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Analyzing Distribution Transformer Degradation with Increased Power Electronic Loads

The influx of non-linear power electronic loads into the distribution network has the potential to disrupt the existing distribution transformer operations. They were not designed to mediate the excessive heating losses generated from the harmonics. To have a good understanding of current standing challenges, a knowledge of the generation and load mix as well as the current harmonic estimations are essential for designing transformers and evaluating their performance. In this paper, we investigate a mixture of essential power electronic loads for a household designed in PSCAD/EMTdc and their potential impacts on transformer eddy current losses and derating using harmonic analysis. Our findings reveal that in the presence of high power electronic loads (especially third harmonics), increasing PV generation may worsen transformer degradation. However, with a low amount of power electronic loads, additional PV generation helps to reduce the harmonic content in the current and improve transformer performance.

eddy current, harmonics, PV, THD, power transforme↗
DOE OSTI2023

A 50 kA Superconducting Transformer for the Upcoming High-Field High-Current Testing Station at the BNL

Brookhaven national laboratory is upgrading its existing user facility to support R&D for High Energy Physics (HEP) and Fusion Energy Sciences (FES). The goal of this upgrade is to host the testing of the superconducting cables, conductors, joints and insert coils under high magnetic field (10 T), with currents up to 50 kA (present limit 20 kA) and at temperatures varying from 4 K to 40 K. To provide a current up to 50 kA to the sample, a superconducting core-less transformer is under construction. The superconducting transformer would additionally reduce the heat loss at the current leads at high currents. The SC transformer consists of two coaxial coils. The primary coil is inside the secondary coil. The primary coil consists of 3048 turns of rectangular wires (1.91 mm x 1.27 mm), wound in 24 layers. The secondary coil consists of 13 turns of the secondary cable (18.35 mm x 5.96 mm), wound in one layer. The parameters of the transformer are chosen to satisfy the space restrictions while using the available conductor. Here this paper presents the design of the 50-kA transformer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Viral‐mediated delivery of morphogenic regulators enables leaf transformation in Sorghum bicolor (L.)

Recent advancements in monocot transformation, using leaf tissue as explant material, have expanded the number of grass species capable of transgenesis. However, the complexity of vectors and reliance on inducible excision of essential morphogenic regulators have so far limited widespread application. Plant RNA viruses, such as Foxtail Mosaic Virus (FoMV), present a unique opportunity to express morphogenic regulator genes, such as Babyboom (Bbm), Wuschel2 (Wus2), Wuschel-like homeobox protein 2a (Wox2a) and the GROWTH-REGULATING FACTOR 4 (GRF4) GRF-INTERACTING FACTOR 1 (GIF1) fusion protein transiently in leaf explant tissues. Furthermore, altruistic delivery of conventional and viral vectors could provide opportunities to simplify vectors used for leaf transformation—facilitating vector optimization and reducing reliance on morphogenic regulator gene integration. In this study, both viral and conventional T-DNA vectors were tested for their ability to promote the formation of embryonic calli, a critical step in leaf transformation protocols, using Sorghum bicolor leaf explants. Although conventional leaf transformation vectors yielded viable embryonic calli (43.2 ± 2.9%: GRF4-GIF1, 50.2 ± 3%: Bbm/Wus2), altruistic conventional vectors employing the GRF4-GIF1 morphogenic regulator resulted in improved efficiencies (61.3 ± 4.7%). Altruistic delivery was further enhanced with the use of viral vectors employing both GRF4-GIF1 and Bbm/Wus2 regulators, resulting in 75.1 ± 2.3% and 79.2 ± 2.5% embryonic calli formation, respectively. Embryonic calli generated from both conventional and viral vectors produced shoots expressing fluorescent reporters, which were confirmed using molecular analysis. This work provides an important proof-of-concept for the use of both altruistic vectors and viral-expressed morphogenic regulators for improving plant transformation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2015

WE-AB-303-07: Computational Monitoring Framework of Four-Dimensional Dose Distributions During Treatment Time Based On a 2D/3D Registration with Adaptive Transformation Parameters in Lung Stereotactic Body Radiotherapy

Purpose: The aim of this study was to develop a computational framework for monitoring four-dimensional (4D) dose distributions during treatment time based on a 2D/3D registration with adaptive transformation parameters (ATPs) in lung stereotactic body radiotherapy (SBRT). Methods: The 4D dose distributions during the SBRT were calculated by applying a pencil beam convolution (PBC) algorithm to simulated 4D-computed tomography (CT) images during treatment time (hereinafter referred to as “treatment” 4D-CT images). The “treatment” 4D-CT images were derived by deforming 3D planning CT images by using transformation parameters so that 2D planning portal dose images (PDIs) can resemble 2D dynamic clinical PDIs in each frame, which were derived from electronic portal imaging device (EPID) images. The transformation parameters were optimized by the Levenberg- Marquardt (LM) algorithm. The optimized transformation parameters in a certain frame were adaptively employed as initial transformation parameters for optimization of the parameters in the consecutive frame. Gamma pass rates (3mm/3%) between dynamic clinical PDIs and dynamic “treatment” PDIs derived from the “treatment” 4D-CT images were measured for comparing the proposed frameworks without and with the ATPs. These proposed frameworks were applied to the EPID dynamic images (40 frames) of two patients with lung cancer, who underwent the SBRT. Results: Gamma pass rates without and with the ATPs were 83.01±4.42% and 89.31±3.18% on average, respectively (p<0.05). Moreover, percentage errors between prescribed doses and estimated doses at an isocenter by the proposed frameworks without and with the ATPs were 10.67±5.66% and 6.34±0.47% on average, respectively (p<0.05). Conclusion: The proposed framework with ATPs could be useful to ensure the quality of the SBRT by monitoring 4D dose distributions during treatment time.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2012

Determination of the normal and anomalous hall effect coefficients in ferromagnetic Ni{sub 50}Mn{sub 35}In{sub 15-x}Si{sub x} Heusler alloys at the martensitic transformation

The magnetization, the electrical resistivity, the magnetoresistance, and the Hall resistivity of Ni{sub 50}Mn{sub 35}In{sub 15-x}Si{sub x} (x = 1.0, 3.0, 4.0) Heusler alloys are studied at T = 80-320 K. The martensitic transformation in these alloys occurs at T = 220-280 K from the high-temperature ferromagnetic austenite phase into the low-temperature martensite phase having a substantially lower magnetization. A method is proposed to determine the normal and anomalous Hall effect coefficients in the presence of magnetoresistance and a possible magnetization dependence of these coefficients. The resistivity of the alloys increases jumpwise during the martensitic transformation, reaches 150-200 {mu}{Omega} cm, and is almost temperature-independent. The normal Hall effect coefficient is negative, is higher than that of nickel by an order of magnitude at T = 80 K, decreases monotonically with increasing temperature, approaches zero in austenite, and does not undergo sharp changes in the vicinity of the martensitic transformation. At x = 3, a normal Hall effect nonlinear in magnetization is detected in the immediate vicinity of the martensitic transformation. The temperature dependences of the anomalous Hall effect coefficient in both martensite and austenite and, especially, in the vicinity of the martensitic transformation cannot be described in terms of the skew scattering, the side jump, and the Karplus-Lutinger mechanisms from the anomalous Hall effect theory. The possible causes of this behavior of the magnetotransport properties in Heusler alloys are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Techniques for Polytypic Transformations in Silicon Carbide

Abstract—: Two main polytype transformations in silicon carbide, namely, 2H → 6H and 3C → 6H, have been studied by ab initio methods. It has been shown that the intermediate phases with trigonal symmetry P3m1 and monoclinic symmetry Cm make it much easier to move the close-packed layers in such transitions by breaking them up into separate stages. It has been found that these two polytype transformations proceed in completely different ways. The links being relocated noticeably tilted compared to their initial position at the transition 2H → 6H, which allows the compression of the SiC links in the plane (11 2-bar 0). The transition 3C → 6H is carried out through the formation of Si–Si and C–C auxiliary links, living for a short time and helping densely packed layers to swap places. As a result, the activation barrier of the transformation 2H → 6H (1.7 eV/atom) is significantly less than the activation barrier of the transformation 3C → 6H (3.6 eV/atom), which means that the second transition should occur at the temperatures by 750–800°C higher than the first one. The energy profiles of this polytypic transformations, as well as the geometry of all intermediate and transition phases have been calculated. It has been shown that all the transition states have monoclinic symmetry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Data for "Viral-mediated Delivery of Morphogenic Regulators Enables Leaf Transformation in Sorghum bicolor (L.)"

Recent advancements in monocot transformation, using leaf tissue as explant material, have expanded the number of grass species capable of transgenesis. However, the complexity of vectors and reliance on inducible excision of essential morphogenic regulators have so far limited widespread application. Plant RNA viruses, such as Foxtail Mosaic Virus (FoMV), present a unique opportunity to express morphogenic regulator genes, such as Babyboom ( Bbm ), Wuschel2 ( Wus2 ), Wuschel-like homeobox protein 2a ( Wox2a ) and the GROWTH-REGULATING FACTOR 4 (GRF4) GRF-INTERACTING FACTOR 1 (GIF1) fusion protein transiently in leaf explant tissues. Furthermore, altruistic delivery of conventional and viral vectors could provide opportunities to simplify vectors used for leaf transformation—facilitating vector optimization and reducing reliance on morphogenic regulator gene integration. In this study, both viral and conventional T-DNA vectors were tested for their ability to promote the formation of embryonic calli, a critical step in leaf transformation protocols, using Sorghum bicolor leaf explants. Although conventional leaf transformation vectors yielded viable embryonic calli (43.2 ± 2.9%: GRF4-GIF1, 50.2 ± 3%: Bbm/Wus2), altruistic conventional vectors employing the GRF4-GIF1 morphogenic regulator resulted in improved efficiencies (61.3 ± 4.7%). Altruistic delivery was further enhanced with the use of viral vectors employing both GRF4-GIF1 and Bbm/Wus2 regulators, resulting in 75.1 ± 2.3% and 79.2 ± 2.5% embryonic calli formation, respectively. Embryonic calli generated from both conventional and viral vectors produced shoots expressing fluorescent reporters, which were confirmed using molecular analysis. This work provides an important proof-of-concept for the use of both altruistic vectors and viral-expressed morphogenic regulators for improving plant transformation.

gene editing↗
DOE OSTI2020

The role of irradiation on deformation-induced martensitic phase transformations in face-centered cubic alloys

Localized deformation, including that by the deformation-induced shearing martensitic phase transformation, is responsible for hardening and embrittlement in irradiated face-centered cubic alloys. These localized deformation processes can have profound consequences on the mechanical integrity of common structural metals used in extreme radiation environments such as nuclear reactors. This article aims to review and understand exactly how irradiation affects the martensitic phase transformation in face-centered cubic alloys, with an emphasis on austenitic stainless steel, given its ubiquity in the archival literature. The influence of irradiation on stacking fault energy and subsequent implications on the phase transformation are discussed. Mechanisms by which irradiation-induced microstructures enhance the phase transformation are also described, including the surface energy contribution of irradiation-induced cavities (i.e., voids and bubbles) toward the critical martensite nucleation energy, and partial dislocation–cavity interactions. In conclusion, a deformation mechanism map illustrates how irradiation-induced cavities can modulate the martensitic transformation pathway.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Electrical Core Transformer for Grid Improvement Incorporating Wire Magnetic Components

The research reported herein adds to the understanding of oil-immersed distribution transformers by exploring and demonstrating potential improvements in efficiency and cost utilizing the unique Buswell approach wherein the unit is redesigned, replacing magnetic sheet with wire allowing for improvements in configuration and increased simplicity in the build process. Exploration of new designs is a critical component in our drive to assure reduction of energy waste, adequate delivery to the citizenry, and the robustness of U.S. manufacturing. By moving that conversation forward, this exploration adds greatly to our base of knowledge and clearly outlines an important avenue for further exploration. This final report shows several advantages of this new transformer type (outlined in a report signed by all of our collaborating partners and included in this document). Although materials development is required to achieve commercial potential, the clear benefits of the technology if that development were a given is established. Exploration of new transformer types and further work on the Buswell design approach is in the best interest of the public, industry, and the United States. Public benefits accrue from design alternatives that reduce the overall use of energy, but it must be acknowledged that new DOE energy efficiency standards have provided some assurance in that regard. Nonetheless the burden of achieving these new standards has been largely shifted to the manufacturers of oil-immersed distribution transformers with cost increasing up to 20% of some units versus 2006 when this investigation was started. Further, rising costs have forced the industry to look closely are far more expensive technologies which may threaten U.S. competitiveness in the distribution transformer market. This concern is coupled with the realization that many units in the nation's grid are beyond their optimal life which suggests that the nation may be headed for an infrastructure crisis that U.S. industry is ill prepared to handle which could further challenge U.S. competitiveness.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2012

COMPOSE-HPC: A Transformational Approach to Exascale

The goal of the COMPOSE-HPC project is to 'democratize' tools for automatic transformation of program source code so that it becomes tractable for the developers of scientific applications to create and use their own transformations reliably and safely. This paper describes our approach to this challenge, the creation of the KNOT tool chain, which includes tools for the creation of annotation languages to control the transformations (PAUL), to perform the transformations (ROTE), and optimization and code generation (BRAID), which can be used individually and in combination. We also provide examples of current and future uses of the KNOT tools, which include transforming code to use different programming models and environments, providing tests that can be used to detect errors in software or its execution, as well as composition of software written in different programming languages, or with different threading patterns.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Insulating Nanofluids and Solids to Upgrade our Large Aging Transformer Equipment (Advanced Research Projects Agency – Energy Research Final Report)

This project developed a highly promising, minimally invasive pathway for transformers with up to double the thermal life that is achieved today. Thermal life is important because it is occasionally necessary to overload transformers in service and this overload raises the internal temperature, accelerating aging2. A seminal initial finding in the research was that a likely achievable increase in the thermal conductivity of the transformer paper could double the thermal life. Oil-impregnated paper is used to wrap the electrical conductors in a transformer to provide a good balance of electrical insulation and thermal conductivity. The novel approach to increase the thermal conductivity was to add micrometer boron nitride particles to the paper during manufacturing. This is encouraging because it provides benefits with minimal impact on the manufacturing processes of the paper or of a transformer.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Lattice Parameter Evolution during the β-to-α and β-to-ω Transformations of Iron- and Aluminum-Modified Ti-11Cr(at.%)

β-titanium (β-Ti) alloys are useful in diverse industries because their mechanical properties can be tuned by transforming the metastable β phase into other metastable and stable phases. Relationships between lattice parameter and β-Ti alloy concentrations have been explored, but the lattice parameter evolution during β-phase transformations is not well understood. In this work, the β-Ti alloys, Ti-11Cr, Ti-11Cr-0.85Fe, Ti-11Cr-5.3Al, and Ti-11Cr-0.85Fe-5.3Al (all in at.%), underwent a 400 °C aging treatment for up to 12 h to induce the β-to-ω and β-to-α phase transformations. Phase identification and lattice parameters were measured in situ using high-temperature X-ray diffraction. Phase compositions were measured ex situ using atom probe tomography. During the phase transformations, Cr and Fe diffused from the ω and α phases into the β matrix, and the β-phase lattice parameter exhibited a corresponding decrease. The decrease in β-phase lattice parameter affected the α- and ω-phase lattice parameters. The α phase in the Fe-free alloys exhibited α-phase c/a ratios close to those of pure Ti. A larger β-phase composition change in Ti-11Cr resulted in larger ω-phase lattice parameter changes than that for Ti-11Cr-0.85Fe. This work illuminates the complex relationship between diffusion, composition, and structure for these diffusive/displacive transformations.

36 MATERIALS SCIENCE↗