Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thermal equilibrium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Stability analysis of a one-dimensional multiphysics model of a molten salt fast reactor

Reactor designs with a fast neutron spectrum have recently moved into the research focus for possible Generation IV reactor concepts - a representative of which is the molten salt fast reactor (MSFR). In order to assess the safety and reliability of this reactor concept, it is necessary to obtain knowledge of the system behaviour. An important part of this research concerns the dynamical stability of the MSFR. Research regarding the MSFR stability so far has either been using linearized models for stability criteria or only been examining certain transients at fixed parameter values. This work delivers a comprehensive stability analysis for a non-linearized MSFR model, and a wide range of values for all relevant parameters. For this purpose, a one-dimensional MSFR model was set up, taking neutron kinetics and thermal hydraulics in the form of a system of differential equations into account. The stability of this model was investigated by means of the numerical tool MATCONT, which was used to monitor the evolution of a so-called fixed-point solution, here referring to the steady state at operating conditions of the system, while system parameters got varied. The MATCONT analyses showed no loss of stability for any of the considered parameter variations and no solutions that might co-exist in parallel with the steady-state fixed-point solution. Therefore these results indicate a stable fixed point to which all solution transients converge, making the considered MSFR model insusceptible to deviations from the equilibrium. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

Comparing and contrasting In-Vial and full-scale systems for sparging volatile analytes

Here, in-vial sparging was demonstrated as an effective, practical alternative to a full-scale sparging system for supporting the analysis of volatile constituents. Using elemental mercury (Hg 0 ) and toluene as representative purgeable analytes, the mass removal for various sparge configurations was measured and a reduced order model was developed and validated. In the primary experiments, Hg 0 in the sparge gas was trapped on activated carbon or gold, thermally desorbed, and quantified using atomic absorption or atomic fluorescence spectroscopy. Toluene experiments using the same in-vial sparge apparatus and sparge parameters were performed to demonstrate the applicability of the reduced order model to a broad range of compounds. Toluene removal was tracked by measuring the remaining toluene in sparged aliquots using Ultraviolet-visible (UV–Vis) spectroscopy. For the sparging, flow rates varied from 25 to 75 mL/min for periods from 0 to 30 min. Sparge performance, mass removal as a function of time, and sparge gas volume were measured for both in-vial and full-scale systems. A model based on dimensionless Henry's Law coefficient, normalized sparge gas volume, and fractional extent of equilibrium matched the experimental data for both compounds and provides a practical tool for future applications. For the conditions tested in this study, the calibrated model indicated that the sparge gas in the in-vial system reached approximately 33% of its equilibrium value before exiting the water surface, while a full-scale system reached approximately 100%. The tests validated the quality, reproducibility, and predictability of sparging performance for both full scale and in-vial sparge systems. Related factors such as waste generation, worker risk, and labor were also assessed. Full scale sparge systems provide the advantage of lower detection levels due to larger sample volume, while the in-vial sparge systems provide advantages for most other factors; including automatability, reducing secondary wastes, lessening the need to clean and check the sparge apparatus, and lowering labor and costs. The data and associated reduced order model support continued development and deployment of in-vial sparge platforms as a practical option for analysis of purgeable analytes such as volatile organic compounds and volatile metals/organometallics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Response of a charged particle in contact with a chaotic thermostat to an oscillating electric field

A numerical investigation is made of the response of a thermalized charge in contact with a chaotic thermostat to an externally applied, oscillating electric field, with and without a confining magnetic field. This study is based on the recent theoretical development of a chaotic thermostat [G. J. Morales, Phys. Rev. E 99, 062218 (2019)] for which the static properties of a thermalized charge (spatial diffusion and mobilities) were previously established. It is found here that in the unmagnetized case, to extract significant power from the oscillating electric field requires that the oscillatory velocity be larger than the thermal velocity. The spatial diffusion caused by the self-consistent, chaotic fluctuations is shown to be reduced, and even suppressed, by the coherent oscillations. The frequency-dependent mobilities, including cyclotron resonance, are determined, and the nonlinear modifications produced by large electric fields are explored. The value of the mobilities and the modifications to the diffusion coefficient exhibit non-monotonic dependencies on the control parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Understanding the cold plasma synthesis of ammonia with model metal catalysts through plasma diagnostics (Final Report)

The industrial synthesis of ammonia, which amounts to over 200 million tons annually, is the most energy-intensive chemical process. Therefore, there is a critical need and increased interest in exploring less energetic routes to produce ammonia. Not only does ammonia have a direct impact on the food market, but also it has the potential as a fuel and hydrogen carrier. Recently, plasma catalysis has emerged as a promising alternative for synthesizing ammonia at mild (pressure, temperature and power) conditions. The key to this catalytic process is the synergy between the plasma and the catalyst, where the non-equilibrium plasma allows the generation of excited species, which recombine at the catalyst surface to form ammonia. However, our current understanding of this process is in its infancy. In this respect, model metals are ideal candidates for gaining a basic understanding of this reaction. Moreover, a major roadblock to rationally designing novel effective catalysts for plasma-assisted ammonia production is the need for fundamental aspects of this process. Through a comprehensive plan that integrates model metals as catalysts and world-class diagnostics, the proposed work aims to provide fundamental knowledge about the nature of reactive processes occurring during plasma-assisted catalysis and to demonstrate the selective production of ammonia, catalyzed by employing selected metals under non-thermal plasma conditions. Toward this goal, the central thrust of this proposal was to demonstrate that the synergy between plasma and rationally selected model metals will boost ammonia yields during plasma-assisted ammonia synthesis by delaying hydrogen recombination. Specifically, we aimed to (1) understand the formation and role of gas-phase active species such as NH, N 2 , N 2 + and Ha during the plasma-enhanced synthesis of ammonia through OES and FTIRAS using different reaction configurations: a) only plasma (non-packed DBD reactor) and b) packed DBD reactor with metal nanoparticles. This proposal was awarded/recommended with a run time on the PCRF facility FY20.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Fast and Non‐equilibrium Uptake of Hydrogen by Pd Icosahedral Nanocrystals

Abstract We report for the first time that Pd nanocrystals can absorb H via a “single‐phase pathway” when particles with a proper combination of shape and size are used. Specifically, when Pd icosahedral nanocrystals of 7‐ and 12‐nm in size are exposed to H atoms, the H‐saturated twin boundaries can divide each particle into 20 smaller single‐crystal units in which the formation of phase boundaries is no longer favored. As such, absorption of H atoms is dominated by the single‐phase pathway and one can readily obtain PdH x with anyx in the range of 0–0.7. When switched to Pd octahedral nanocrystals, the single‐phase pathway is only observed for particles of 7 nm in size. We also establish that the H‐absorption kinetics will be accelerated if there is a tensile strain in the nanocrystals due to the increase in lattice spacing. Besides the unique H‐absorption behaviors, the PdH x ( x =0–0.7) icosahedral nanocrystals show remarkable thermal and catalytic stability toward the formic acid oxidation due tothe decrease in chemical potential for H atoms in a Pd lattice under tensile strain.

Zhou, Siyu↗
DOE OSTI2023

Fast and Non‐equilibrium Uptake of Hydrogen by Pd Icosahedral Nanocrystals

Abstract We report for the first time that Pd nanocrystals can absorb H via a “single‐phase pathway” when particles with a proper combination of shape and size are used. Specifically, when Pd icosahedral nanocrystals of 7‐ and 12‐nm in size are exposed to H atoms, the H‐saturated twin boundaries can divide each particle into 20 smaller single‐crystal units in which the formation of phase boundaries is no longer favored. As such, absorption of H atoms is dominated by the single‐phase pathway and one can readily obtain PdH x with anyx in the range of 0–0.7. When switched to Pd octahedral nanocrystals, the single‐phase pathway is only observed for particles of 7 nm in size. We also establish that the H‐absorption kinetics will be accelerated if there is a tensile strain in the nanocrystals due to the increase in lattice spacing. Besides the unique H‐absorption behaviors, the PdH x (x=0–0.7) icosahedral nanocrystals show remarkable thermal and catalytic stability toward the formic acid oxidation due tothe decrease in chemical potential for H atoms in a Pd lattice under tensile strain.

Chemistry↗
DOE OSTI2025

Impact of U-10Mo HALEU fuel element tolerances on the Massachusetts Institute of Technology reactor safety and operational performance – Thermal hydraulics

The U.S. is coordinating efforts for the conversion of six U.S. High Performance Research Reactors (USHPRR) including one critical facility from highly enriched uranium (HEU) to low-enriched uranium (LEU). In order to continue the mission of these reactors, including the Massachusetts of Institute of Technology Reactor (MITR), and achieve similar performance, high-assay low-enriched uranium (HALEU) with a high-density metallic alloy of uranium with 10 wt% molybdenum (U-10Mo) is being evaluated. The impact of the fabrication specification and tolerances was assessed following the preliminary design of the MITR LEU fuel elements using the U-10Mo monolithic alloy. This research focuses on the analysis of fabrication specification impact on thermal hydraulics (TH) characteristic of the MITR LEU core as a function of the variation of the relevant fuel specification parameters (e.g., coolant channel gap thickness, fuel plate thickness, etc.). The analyses are performed based on an all-fresh LEU fuel conversion plan identified in a preliminary safety analysis report submitted to the Nuclear Regulatory Commission. The reactor power margin to the onset of nucleate boiling (ONB) is assessed under the limiting safety system settings (LSSS), where a scram occurs, to ensure there is sufficient margin to the reactor safety limit, which is defined by the onset of flow instability that occurs after the ONB. The best estimate plus uncertainty approach is employed to analyze this TH characteristic, which yields realistic results while maintaining adequate conservatism, utilizing a statistical uncertainty propagation method with the STAT7 code. The TH characteristic is analyzed as a function of the variability of the specification parameters resulting from the fabrication process. The main findings of this study show that the MITR core can meet the TH safety and operational requirements at the all-LEU initial core startup (cycle 1), selected transition cycles (most reactive cycle and most limiting cycle: cycle 3 and 5, respectively) and equilibrium (cycle 14) cores under all limiting fabrication parameter combinations considered. In addition, the analyses show that the dependency of the core power margin to ONB on those specification parameters that have the most direct impact on TH performance is non-linear but monotonically decreasing within the specification tolerances. The third order polynomial fit curves are reported in detail for selected limiting cases and can serve as a powerful tool for future MITR fuel management in cases such as when HALEU supply is established that may allow additional cycle length or other operational benefits.

Conversion↗
DOE OSTI2023

A high‐order discontinuous Galerkin approach for physics‐based thermospheric modeling

Abstract The accurate prediction of aerodynamic drag on satellites orbiting in the upper atmosphere is critical to the operational success of modern space technologies, such as satellite‐based communication or navigation systems, which have become increasingly popular in the last few years due to the deployment of constellations of satellites in low‐Earth orbit. As a result, physics‐based models of the ionosphere and thermosphere have emerged as a necessary tool for the prediction of atmospheric outputs under highly variable space weather conditions. This paper proposes a high‐fidelity approach for physics‐based space weather modeling based on the solution of the Navier–Stokes equations using a high‐order discontinuous Galerkin method, combined with a matrix‐free strategy suitable for high‐performance computing on GPU architectures. The approach consists of a thermospheric model that describes a chemically frozen neutral atmosphere in nonhydrostatic equilibrium driven by the external excitation of the Sun. A novel set of variables is considered to treat the low densities present in the upper atmosphere and to accommodate the wide range of scales present in the problem. At the same time, and unlike most existing approaches, radial and angular directions are treated in a nonsegregated approach. The study presents a set of numerical examples that demonstrate the accuracy of the approximation and validate the current approach against observational data along a satellite orbit, including estimates of established empirical and physics‐based models of the ionosphere‐thermosphere system. Finally, a one‐dimensional radial derivation of the physics‐based model is presented and utilized for conducting a parametric study of the main thermal quantities under various solar conditions.

Engineering↗
DOE OSTI2022

Optimization of quasi-symmetric stellarators with self-consistent bootstrap current and energetic particle confinement

Quasi-symmetry can greatly improve the confinement of energetic particles and thermal plasma in a stellarator. The magnetic field of a quasi-symmetric stellarator at high plasma pressure is significantly affected by the bootstrap current, but the computational cost of accurate stellarator bootstrap calculations has precluded use inside optimization. Here, a new efficient method is demonstrated for optimization of quasi-symmetric stellarator configurations such that the bootstrap current profile is consistent with the geometry. The approach is based on the fact that all neoclassical phenomena in quasi-symmetry are isomorphic to those in axisymmetry. Therefore, accurate formulas for the bootstrap current in tokamaks, which can be evaluated rapidly, can be applied also in stellarators. The deviation between this predicted parallel current and the actual parallel current in the magnetohydrodynamic equilibrium is penalized in the objective function, and the current profile of the equilibrium is included in the parameter space. Quasi-symmetric configurations with significant pressure are thereby obtained with self-consistent bootstrap current and excellent confinement. In a comparison of fusion-produced alpha particle confinement across many stellarators, the new configurations have significantly lower alpha energy losses than many previous designs.

Landreman, M. (ORCID:000000027233577X)↗
DOE OSTI2020

Isoscaling and nuclear reaction dynamics

Isoscaling parameters α and β have been explored as a function of breakup angle in binary excited projectile-like fragment decays produced in collisions of 70 Zn+ 70 Zn and 64 Zn+ 64 Zn at 35 MeV per nucleon. In this analysis, focus was placed on isoscaling the second heaviest fragment with 4 ≤ Z L ≤ 8 emitted from the excited projectile-like fragment in events that contained a heavy fragment with Z H ≥ 12. The breakup orientation θ prox was defined as the angle between the heavy and light fragments’ center-of-mass velocity and the fragment pairs’ relative velocity. Breakups between 0° < θ prox ≤ 80° have been shown to be dominated by dynamical contributions, while break-up angles of θ prox > 100° are predominantly statistical. Historically, isoscaling has often been understood and applied in a statistical context, assuming that the fragments are produced after statistical equilibrium is achieved. Finally, studying isoscaling parameters as a function of θ prox reveals the sensitivity of α and β to the mechanism of fragment production.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Free-spray characteristics and spray-wall interactions of methanol on a gasoline direct injector under flash-boiling and non-flash-boiling conditions

Methanol is considered a promising alternative fuel for internal combustion engines (ICEs) due to its high-octane number, fast laminar flame speed, and elevated latent heat of vaporization, all of which support higher compression ratios and improved thermal efficiency. However, its substantial latent heat of vaporization also poses cold-start challenges, such as misfire and fuel film deposition. This study aims to investigate methanol spray morphology and spray-wall interaction using the Spray M injector from the Engine Combustion Network within a constant-pressure flow vessel. A recently developed unified numerical framework capable of modeling both flash and non-flash boiling sprays is validated against experimental liquid volume fraction data acquired via 3-D computed tomography. Here, the results reveal that flash boiling significantly alters the spray morphology, leading to smaller droplets and spray collapse due to enhanced air-entrainment-induced turbulence. Quantitative agreement between experiments and simulations confirms this behavior. Coupled 0-D equilibrium and 3-D computational fluid dynamics analyses show that flash boiling accelerates evaporation and reduces fuel residence time, while non-flash conditions maintain a persistent liquid core more susceptible to wall wetting. Wall temperature diagnostics reveal that spray collapse alters heat transfer patterns by shifting cooling effects. Mixture fraction analysis indicates that evaporation is primarily governed by shear-layer turbulence, though deviations from adiabatic equilibrium mixing emerge under low-turbulence conditions. Finally, increasing fuel, ambient, and wall temperatures reduces wall wetting and film thickness, mitigating cold-start risks. These findings enhance the understanding of methanol sprays’ behavior and support its adoption as a viable, alternative fuel for ICEs.

Engine Combustion Network↗
DOE OSTI2025

Simulations of saturated MHD activity in the HBT-EP tokamak

The NIMROD code is used to perform simulations of MHD activity in the HBT-EP tokamak, including the effect of a resistive wall. Linear simulations are conducted to scan current and pressure profiles to establish self-consistent baseline equilibria that result in MHD instabilities with low error between experimental diagnostics and synthetic equivalents. A family of such equilibria is found with relatively peaked current and pressure profiles. Nonlinear simulations are performed using the optimal equilibrium, which is linearly unstable to a Resistive Wall Mode—stable in the ideal wall limit and with an Alfvénic growth rate in the no-wall limit. Using resistive wall boundary conditions, nonlinear Hall MHD simulations yield a rotating, saturated n=1 mode similar to the type observed experimentally in HBT-EP discharges. An n=1 mode around the q=2 surface mediates a localized axisymmetric perturbation that flattens the plasma current from a linearly unstable state to a 3D, rotating, stable state. During the saturated period, periodic changes in inter-diagnostic phase lag allow for qualitative estimations of effective, macroscopic transport coefficients used in MHD closure models and could be extended to model post-disruption MHD structure rotation after thermal quenches seen in HBT-EP.

Arnold, David A. (ORCID:0009000059535761)↗
DOE OSTI2025

Stretched exponential magnetic relaxation dynamics in artificial square ice revealed through x-ray photon correlation spectroscopy

X-ray photon correlation scattering measurements are undertaken on a thermally active artificial spin ice based on the square lattice, referred to as artificial square ice, to probe the fluctuation timescales as a function of temperature as the system passes through the paramagnetic-antiferromagnetic phase transition, which belongs to the two-dimensional Ising universality class. In the paramagnetic regime, a single exponential timescale is seen, whereas at and below the critical temperature, a stretched exponential decorrelation is observed, with the stretching exponent decreasing from unity down to below one-half as the temperature reduces. This trend is confirmed by kinetic Monte Carlo simulations of a simplified point-dipolar square ice system, and is in agreement with past theoretical work on the kinetic Ising model where stretched exponential relaxation due to equilibrium domain wall dynamics below the critical temperature was found.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Coalescence and splashing threshold for head-on collisions of liquid metal nanodroplets

Head-on collisions of liquid metal nanodroplets in a vacuum are investigated through molecular dynamics simulations in order to determine the transition threshold between the coalescing and splashing regimes for six different materials (aluminum, calcium, cerium, gold, platinum, and tin). Droplets of various sizes and initial speeds are simulated, and it is found that the Reynolds and Ohnesorge numbers are able to predict the transition between the coalescing and splashing regimes. An energy balance for coalescing droplets shows that the initial energy is mainly converted to thermal energy increasing the temperature of the combined droplets by several hundred to several thousand kelvin depending on the material, and this result is confirmed in the simulations. Furthermore, when splashing occurs, the number of smaller droplets formed and the spreading rate are found to be dependent on the initial size and initial speed of the original droplets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Multi-scale time-resolved electron diffraction: A case study in moiré materials

Ultrafast-optical-pump — structural-probe measurements, including ultrafast electron and x-ray scattering, provide direct experimental access to the fundamental timescales of atomic motion, and are thus foundational techniques for studying matter out of equilibrium. High-performance detectors are needed in scattering experiments to obtain maximum scientific value from every probe particle. Here we deploy a hybrid pixel array direct electron detector to perform ultrafast electron diffraction experiments on a WSe 2 /MoSe 2 2D heterobilayer, resolving the weak features of diffuse scattering and moiré superlattice structure without saturating the zero order peak. Enabled by the detector’s high frame rate, we show that a chopping technique provides diffraction difference images with signal-to-noise at the shot noise limit. Finally, we demonstrate that a fast detector frame rate coupled with a high repetition rate probe can provide continuous time resolution from femtoseconds to seconds, enabling us to perform a scanning ultrafast electron diffraction experiment that maps thermal transport in WSe 2 /MoSe 2 and resolves distinct diffusion mechanisms in space and time.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Simulations of radiatively cooled magnetic reconnection driven by pulsed power

Magnetic reconnection is an important process in astrophysical environments, as it reconfigures magnetic field topology and converts magnetic energy into thermal and kinetic energy. In extreme astrophysical systems, such as black hole coronae and pulsar magnetospheres, radiative cooling modifies the energy partition by radiating away internal energy, which can lead to the radiative collapse of the reconnection layer. In this paper, we perform two- and three-dimensional simulations to model the MARZ (Magnetic Reconnection on Z) experiments, which are designed to access cooling rates in the laboratory necessary to investigate reconnection in a previously unexplored radiatively cooled regime. These simulations are performed in GORGON, an Eulerian two-temperature resistive magnetohydrodynamic code, which models the experimental geometry comprising two exploding wire arrays driven by 20 MA of current on the Z machine (Sandia National Laboratories). Radiative losses are implemented using non-local thermodynamic equilibrium tables computed using the atomic code Spk, and we probe the effects of radiation transport by implementing both a local radiation loss model and P 1/3 multi-group radiation transport. The load produces highly collisional, super-Alfvénic (Alfvén Mach number M A ≈ 1.5), supersonic (Sonic Mach number M S ≈ 4–5) strongly driven plasma flows which generate an elongated reconnection layer (Aspect Ratio L/δ≈100 , Lundquist number S L ≈ 400). The reconnection layer undergoes radiative collapse when the radiative losses exceed the rates of ohmic and compressional heating (cooling rate/hydrodynamic transit rate = τ$^{–1}_{cool}$/τ$^{–1}_{H}$ ≈100); this generates a cold strongly compressed current sheet, leading to an accelerated reconnection rate, consistent with theoretical predictions. Lastly, the current sheet is also unstable to the plasmoid instability, but the magnetic islands are extinguished by strong radiative cooling before ejection from the layer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Cross-beam energy transfer saturation by ion trapping-induced detuning

The performance of direct-drive inertial confinement fusion implosions relies critically on the coupling of laser energy to the target plasma. Cross beam energy transfer (CBET), the resonant exchange of energy between intersecting laser beams mediated by ponderomotively driven ion-acoustic waves (IAW), inhibits this coupling by scattering light into unwanted directions. Furthermore, the variety of beam intersection angles and varying plasma conditions in an implosion results in IAWs with a range of phase velocities. Here we show that CBET saturates through a resonance detuning that depends on the IAW phase velocity and that results from trapping-induced modifications to the ion distribution functions. For smaller phase velocities, the modifications to the distribution functions can rapidly thermalize in the presence of mid-Z ions, leading to a blueshift in the resonant frequency. For larger phase velocities, the modifications can persist, leading to a redshift in the resonant frequency. Ultimately, these results may reveal pathways towards CBET mitigation and inform reduced models for radiation hydrodynamics codes to improve their predictive capability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Revealing Excited‐State Trajectories on Potential Energy Surfaces with Atomic Resolution in Real Time

Abstract Photoexcited molecular trajectories on potential energy surfaces (PESs) prior to thermalization are intimately connected to the photochemical reaction outcome. The excited‐state trajectories of a diplatinum complex featuring photo‐activated metal–metal σ ‐bond formation and associated Pt−Pt stretching motions were detected in real time using femtosecond wide‐angle X‐ray solution scattering. The observed motions correspond well with coherent vibrational wavepacket motions detected by femtosecond optical transient absorption. Two key coordinates for intersystem crossing have been identified, the Pt−Pt bond length and the orientation of the ligands coordinated with the platinum centers, along which the excited‐state trajectories can be projected onto the calculated PESs of the excited states. This investigation has gleaned novel insight into electronic transitions occurring on the time scales of vibrational motions measured in real time, revealing ultrafast nonadiabatic or non‐equilibrium processes along excited‐state trajectories involving multiple excited‐state PESs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗