Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “texture (materials)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Effect of Mg Content in Melt-Spun Mn–Bi–Mg–Sb–In Alloys on the Structure and Properties of Field-Annealed Magnets

Mn-Bi alloys modified with Mg and other elements were recently developed into promising rare-earth-free permanent magnets through successive melt-spinning, warm compaction, and short magnetic-field annealing. This letter reports herein on the crystal structures, texture, and magnetic properties observed in Mn 50 Bi 49-x Mg x Sb 0.5 In 0.5 alloys (x = 0, 1.5, 3.0, 4.5) throughout these processing steps. The Mg substitution favors MnBi-based intermetallic phases over the Bi- and Mn-based solid solutions and the stable α intermetallic phase over the metastable β' intermetallic phase. Magnesium increases the c/a ratio of the α phase lattice parameters for all studied x values and it increases the degree of the field-annealing-induced texture for x ≤ 3. The effect of Mg on coercivity is explained as combination of a positive one via the α phase magnetocrystalline anisotropy and a negative one via the development of texture. The effect of the substitution on the maximum energy product additionally involves the decreasing density of the alloys; the optimum x is found to be ≈3. Additionally reported are the thermal properties of selected alloys. The mechanism of field-annealing effect on the coercivity is briefly discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Electric field control of chirality

Polar textures have attracted substantial attention in recent years as a promising analog to spin-based textures in ferromagnets. Here, using optical second-harmonic generation–based circular dichroism, we demonstrate deterministic and reversible control of chirality over mesoscale regions in ferroelectric vortices using an applied electric field. The microscopic origins of the chirality, the pathway during the switching, and the mechanism for electric field control are described theoretically via phase-field modeling and second-principles simulations, and experimentally by examination of the microscopic response of the vortices under an applied field. The emergence of chirality from the combination of nonchiral materials and subsequent control of the handedness with an electric field has far-reaching implications for new electronics based on chirality as a field-controllable order parameter.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Reconstructing parent microstructures in martensitic and pearlitic Ti-Cu

Evaluating the microstructural evolution of parent phases has long been a challenge in metals with a partial or complete solid state transformation. Most parent microstructure evolution has to be inferred from the product microstructure, with some information permanently lost. Parent microstructure reconstructions relying on orientation relationships and EBSD data are a useful tool to overcome this challenge, though much background knowledge is required to do so. Here, this work introduces a reconstruction process for a eutectoid composition Ti-Cu binary alloy to evaluate the high temperature β-Ti phase from martensitic and pearlitic product microstructures. Martensitic microstructures were accurately reconstructed, enabling elucidation of β-Ti grain size and texture, and the employed script included for scientific reference. Pearlitic microstructures did not reconstruct effectively with the current process. However, new insight into the interfacial crystallographic orientations of pearlitic Ti-Cu microstructures was gleaned via this analysis, and future investigations of interest are discussed accordingly. Ultimately, these findings demonstrate tools widely implemented on conventional titanium and ferrous alloys can also be applied to understand parent microstructures in Ti-Cu and other alloys of emerging interest. This is especially of use as new manufacturing processes for such materials require understanding how parent phase microstructures respond to new, novel material processing such as AM.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Large-scale metal strip for power storage and energy conversion applications by machining-based deformation processing

Machining-based deformation processing is used to produce metal foil and flat wire (strip) with suitable properties and quality for electrical power and renewable energy applications. In contrast to conventional multistage rolling, the strip is produced in a single-step and with much less process energy. Examples are presented from metal systems of varied workability, and strip product scale in terms of size and production rate. By utilizing the large-strain deformation intrinsic to cutting, bulk strip with ultrafine-grained microstructure, and crystallographic shear-texture favourable for formability, are achieved. In conclusion, implications for production of commercial strip for electric motor applications and battery electrodes are discussed.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Comparison of the Mechanical Properties of a Conjugated Polymer Deposited Using Spin Coating, Interfacial Spreading, Solution Shearing, and Spray Coating

The mechanical properties of π-conjugated (semiconducting) polymers are a key determinant of the stability and manufacturability of devices envisioned for applications in energy and healthcare. These properties—including modulus, extensibility, toughness, and strength—are influenced by the morphology of the solid film, which depends on the method of processing. To date, the majority of work done on the mechanical properties of semiconducting polymers has been performed on films deposited by spin coating, a process not amenable to the manufacturing of large-area films. Here, we compare the mechanical properties of thin films of regioregular poly(3-heptylthiophene) (P3HpT) produced by three scalable deposition processes—interfacial spreading, solution shearing, and spray coating—and spin coating (as a reference). Our results lead to four principal conclusions. (1) Spray-coated films have poor mechanical robustness due to defects and inhomogeneous thickness. (2) Sheared films show the highest modulus, strength, and toughness, likely resulting from a decrease in free volume. (3) Interfacially spread films show a lower modulus but greater fracture strain than spin-coated films. (4) The trends observed in the tensile behavior of films cast using different deposition processes held true for both P3HpT and poly(3-butylthiophene) (P3BT), an analogue with a higher glass transition temperature. Grazing incidence X-ray diffraction and ultraviolet–visible spectroscopy reveal many notable differences in the solid structures of P3HpT films generated by all four processes. Herein, while these morphological differences provide possible explanations for differences in the electronic properties (hole mobility), we find that the mechanical properties of the film are dominated by the free volume and surface topography. In field-effect transistors, spread films had mobilities more than 1 magnitude greater than any other films, likely due to a relatively high proportion of edge-on texturing and long coherence length in the crystalline domains. Overall, spread films offer the best combination of deformability and charge-transport properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Hot-Roll Fabrication of Anisotropic Nanograin Nd-Fe-B Magnet

Nd-Fe-B based magnets have the highest energy product among all permanent magnets, which is required for numerous clean energy technologies. For higher temperature applications (T > 150°C), additions of heavy rare earth elements (HREEs) such as Dy are required to maintain sufficient coercivity during operation. Additions of Dy are expensive. Thus, it is desirable to reduce the need for HREEs by reducing the grain size to the nanoscale, which increases the coercivity and decreases its temperature dependence. Here, we report a novel nanograin Nd-Fe-B magnet fabrication method that is continuous and inexpensive. The process uses mechanically milled Nd-Fe-B melt-spun flakes as feedstock powder that is packed into a metal vessel and then hot rolled to form a fully dense and highly textured strip magnet with tailored thicknesses, down to 800 µm. Finally, using this process, fully dense nanograin bulk magnets can be synthesized in minutes compared to the traditional multi-step processes that are typically low throughput.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A boundary-based approach to the multiscale microstructural characterization of a W-Ni-Fe tungsten heavy alloy

Here, a combination electron backscattered diffraction and transmission electron microscopy based approach has been implemented to study the effects of purposefully introduced anisotropy in a tungsten heavy alloy (WHA) through hot-rolling. Particular attention has been paid to changes in number and proportion of various boundary types from a quantitative standpoint; incorporating qualitative behavioral observations from prior analyses to generate experimentally-validated bases for the examination and application of a microstructure which exhibits an optimal balance of strength and ductility. It is asserted that a combination of increased temperatures during rolling and additional isothermal hold time for the post-rolling annealing steps may lead to a reduction in unfavorable textural components due to rolling in the W-phase and a decrease in premature fracture due to W-W microcracking respectively. This is expected to further increase the proportion of interphase boundaries and improve the ductility of these rolled structures, producing a superior rolled WHA microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Active populations and growth of soil microorganisms are framed by mean annual precipitation in three California annual grasslands

Climate influences soil microbial composition and function, but the relative importance of a site's historic climate versus its more immediate environmental conditions is unclear. Using quantitative stable isotope probing (qSIP), we characterized actively growing soil microbial communities and soil properties in three California annual grasslands that span a rainfall gradient and have developed on similar parent material. The soils were assayed in the wet winter season, when environmental conditions are most similar across sites. Since growing populations might be expected to be most responsive to contemporary environmental conditions, we hypothesized that the structure of growing microbial communities would be more similar across the gradient than that of total communities (i.e., including non-growing populations). In addition, we hypothesized that population growth rates would be slowest in the driest site, reflecting a legacy effect of low soil moisture on microbial growth. Soils along the rainfall gradient differed in pH, texture, and cation exchange capacity, but not in total C, C:N or dominant minerals. The radiocarbon (14C) age of soil C (reflecting turnover time) increased with mean annual precipitation but soil respiration was uniformly modern, reflecting microbial reliance on recent C inputs across the sites. The structure of both total and growing microbial communities differed across sites. Across major microbial phyla, including the Actinobacteria, Acidobacteria, Bacteroidetes, Gemmatimonadetes and Proteobacteria, bacterial growth rates were consistently lower in the site with the lowest mean annual precipitation. Taxa that were growing at the dry site alone grew more slowly than taxa that grew at multiple sites. These results reflect the influence of climate history and point to the role of environmental filtering at the driest site in shaping its slower growing microbial community, possibly reflecting adaptation to repeated exposure to water stress. Lastly, across taxa, the growth rate of a taxon at one site was correlated with its growth rate in the other sites. Furthermore, this growth rate coherence is likely a consequence of genetically determined physiological traits and is consistent with the idea that evolutionary history constrains growth rate.

Environmental filtering↗
DOE OSTI2022

Enhanced Transport of TiO 2 in Unsaturated Sand and Soil after Release from Biodegradable Plastic during Composting

Biodegradable plastics can reach full degradation when disposed of appropriately and thus alleviate plastic pollution caused by conventional plastics. But additives can be released into the environment during degradation, and the fate of these additives can be affected by the degradation process. In this study, we characterized TiO 2 particles released from a biodegradable plastic mulch during composting and studied the transport of the released TiO 2 particles in inert sand and agricultural soil columns under unsaturated flow conditions. TiO 2 microparticles were released from the biodegradable plastic mulch in both single particle and cluster forms. The released TiO 2 microparticles were fully retained in unsaturated soil columns due to its ne texture, slow flow rate, and favorable attachment conditions. But in unsaturated sand columns, the released TiO 2 microparticles were highly mobile. Additionally, comparison with the pristine TiO 2 microparticles revealed that the enhanced mobility of the released TiO 2 microparticles was caused by the presence of compost residues which blocked attachment sites on the sand surface. This study demonstrates that TiO 2 microparticles can be released during composting of biodegradable plastics, and the transport potential of the released TiO 2 microparticles in the terrestrial environment can be enhanced by the presence of compost material.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Hybrid microstructure of smectite clay gels revealed using neutron and synchrotron X-ray scattering

Aqueous suspensions of swelling clays display a nematic sol-gel transition at very low solid concentrations. The underlying microstructure of the gel has remained a point of contention since the time of Irving Langmuir and has been a major obstacle to fully realizing the potential of clays for practical applications. Here, we comprehensively probe the microstructure of a smectite clay suspension using ultra-small angle neutron/X-ray scattering and find that the nematic gel is structurally ordered and contains entities that are at least an order of magnitude larger than the individual particles. Complementary cryo-electron microscopy shows the presence of domains having particle-particle ordering responsible for nematic texture and regions of particle-particle aggregation responsible for gel-like behavior. We find that the smectic clay gels have a hybrid microstructure with co-existing repulsive nematic domains and attractive disordered domains.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Symmetry-driven persistent spin texture for the two-dimensional nonsymmorphic CdTe and ZnTe crystal structures

In this paper, two nonsymmorphic two-dimensional structures of CdTe and ZnTe are modeled, and using state-of-the-art density functional theory with the group theory of solids, their symmetry-enforced electronic properties are studied. The in-plane ferroelectricity coupled with strong spin-orbit coupling induces a unidirectional out-of-plane Rashba spin-orbit field that can host a momentum-independent uniform spin configuration known as persistent spin texture (PST) at the Brillouin zone center. PST in these structures is found to be robust against external perturbations such as strain, structural distortion, and independent of layer thickness. These unprecedented intrinsic spin transport properties hold utmost importance in spintronics, as the experimental stringent condition of equal Rashba and Dresselhaus constants [Phys. Rev. Lett. 90, 146801 (2003)] is eliminated. The calculated persistent spin helix wavelength of <~5 nm paves the way for developing next-generation nanosized nonballistic spin field-effect transistors compared with micrometer-sized GaAs/AlGaAs quantum wells. Further, these materials exhibit finite spin Hall conductivity at the band edges and hence can be used in ferromagnet-free spin Hall transistors. Although CdTe and ZnTe systems have been widely studied for photocatalysis and solar cell applications over the past few decades, their potential application in spintronic devices has not been explored. Mono/few layers of CdTe and ZnTe synthesized from (110) facets of bulk zinc-blende crystals [Nat. Commun. 3, 1057 (2012)] satisfy all symmetry operations of the nonsymmorphic space group and hence can be considered ideal materials to verify our theoretical results experimentally.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Unidirectional multipulse helicity-independent all-optical switching in [Ni/Pt] based synthetic ferrimagnets

Nickel-platinum-based synthetic ferrimagnets (SFi's) are highly tunable and rare-earth-free materials that allow ultrafast all optical control of magnetism to be explored. This study considers a SFi composed of a ferromagnetic [Ni/Pt] multilayer and a ferromagnetic Co layer, separated by an Ir layer that mediates an antiferromagnetic coupling. Helicity-independent all optical switching (HI-AOS) between two antiparallel magnetization states is observed. AOS may be realized at increased temperature through reduction of the thickness of the Pt layers. Switching is unidirectional and has a strong dependence on the applied magnetic field history, which suggests the possible presence of a nanoscale magnetic texture that may be important in controlling AOS in SFi systems. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Toroidal polar topology in strained ferroelectric polymer

Polar topological texture has become an emerging research field for exotic phenomena and potential applications in reconfigurable electronic devices. Here, we report toroidal topological texture self-organized in a ferroelectric polymer, poly(vinylidene fluoride-ran-trifluoroethylene) [P(VDF-TrFE)], that exhibits concentric topology with anticoupled chiral domains. The interplay among the elastic, electric, and gradient energies results in continuous rotation and toroidal assembly of the polarization perpendicular to polymer chains, whereas relaxor behavior is induced along polymer chains. Such toroidal polar topology gives rise to periodic absorption of polarized far-infrared (FIR) waves, enabling the manipulation of the terahertz wave on a mesoscopic scale. Our observations should inform design principles for flexible ferroic materials toward complex topologies and provide opportunities for multistimuli conversions in flexible electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Femtosecond temperature measurements of laser-shocked copper deduced from the intensity of the x-ray thermal diffuse scattering

We present 50-fs, single-shot measurements of the x-ray thermal diffuse scattering (TDS) from copper foils that have been shocked via nanosecond laser ablation up to pressures above ∼135 GPa. We hence deduce the x-ray Debye–Waller factor, providing a temperature measurement. The targets were laser-shocked with the DiPOLE 100-X laser at the High Energy Density endstation of the European X-ray Free-Electron Laser. Single x-ray pulses, with a photon energy of 18 keV, were scattered from the samples and recorded on Varex detectors. Despite the targets being highly textured (as evinced by large variations in the elastic scattering) and with such texture changing upon compression, the absolute intensity of the azimuthally averaged inelastic TDS between the Bragg peaks is largely insensitive to these changes, and allowing for both Compton scattering and the low-level scattering from a sacrificial ablator layer provides a reliable measurement of $T/Θ^2_D$, where Θ D is the Debye temperature. We compare our results with the predictions of the SESAME 3336 and LEOS 290 equations of state for copper and find good agreement within experimental errors. We, thus, demonstrate that single-shot temperature measurements of dynamically compressed materials can be made via thermal diffuse scattering of XFEL radiation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Flexural strength of a conventionally processed and additively manufactured debased 94% alumina

Mechanical strength of a 94 wt% debased alumina was measured using ASTM-C1161 specimens fabricated via conventional and lithography-based ceramic manufacturing (LCM) methods. The effects of build orientation and a 1500°C wet hydrogen fire added to the LCM firing sequence on strength were evaluated. Additionally, a Weibull fit to the conventional flexural specimen data yielded 20 and 356 MPa for the modulus and characteristic strength, respectively. Weibull fits of the data from the LCM specimens yielded moduli between 7.5 and 11.3 and characteristics strengths between 333 and 339 MPa. A Weibull fit to data from LCM specimens subjected to the wet hydrogen fire yielded 14.2 and 376 MPa for the modulus and characteristic strength, respectively. The 95% confidence intervals for all Weibull parameters are reported. Average Archimedes bulk densities of LCM and conventional specimens were 3.732 and 3.730 g/cm 3 , respectively. Process dependent differences in surface morphology were observed in scanning electron microscope (SEM) images of specimen surfaces. SEM images of LCM specimen cross-sections showed alumina grain texture dependent on build direction, but no evidence of porosity concentrated in planes between printed layers. Fracture surfaces of LCM and conventionally processed specimens revealed hackle lines and mirror regions indicative of fracture initiation at the sample surface rather than the interior.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A scalable framework for efficient coupling of thermal and microstructural simulations in additive manufacturing

Predicting microstructure evolution in metal additive manufacturing (AM) is important for process optimization, but spatiotemporal scale disparities between thermal transport and microstructure evolution create significant challenges for efficient data transfer between simulation codes. To address this, we present Stork, a scalable framework for coupling thermal and microstructural simulations. Stork uses a sparse data representation to identify and store active solidification sub-volumes, enabling highly parallel quad-linear interpolation from coarse thermal grids to fine microstructure grids without large intermediate storage. We demonstrate the framework by coupling the semi-analytic heat transfer code 3DThesis with the time-parallel cellular automata code Toucan. This approach achieves over two orders of magnitude reduction in data generation time and file size compared to prior workflows. Numerical studies show that quad-linear interpolation preserves grain morphology and crystallographic texture in laser powder bed fusion (LPBF) simulations for coarsening ratios up to 16. Overall, Stork provides a scalable pathway for high-throughput, component-scale AM simulations on modern high-performance computing systems.

36 MATERIALS SCIENCE↗
DOE OSTI2026

High energy X-ray characterization of the microstructure of PuGa alloy samples at macroscopic depths and non-ambient conditions

High energy (95 keV) X-rays were utilized to characterize the microstructure of eight PuGa alloy samples at room temperature and during cooling to ∼10 K. The samples had different Ga content (nominally 0-3.4 at.%), age, and history. A ninth sample, similarly characterized with neutron diffraction, was included to extend the Ga range to 7 at.%. The samples span the range from single phase α (monoclinic) to δ (face-centered cubic) PuGa, as well as a two-phase α′/δ sample. The crystallographic textures, phase fractions, lattice parameters and dislocation densities of each sample were evaluated through distinct analysis techniques. The textures of the samples were modest. In each case, the dislocation densities were relatively high, comparable to cold worked metals and metals exposed to similar radiation dose. At room temperature, the lattice parameters determined in the predominantly single-phase samples were larger than expected based on the nominal Ga concentration. The observed lattice thermal expansions of the single-phase δ samples to 10 K are self-consistent across the samples and consistent with previous measurements reported in the literature. Significantly larger thermal lattice strain is observed in the δ phase of the two-phase material due to mechanical constraint from the α′ phase, which has a three times larger thermal expansion and is much harder than the δ phase. In conclusion, the results demonstrate the unique value of high-energy X-rays for relatively routine microstructural characterization of Pu alloy samples.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The 2020 Skyrmionics Roadmap

The notion of non-trivial topological winding in condensed matter systems represents a major area of present-day theoretical and experimental research. Magnetic materials offer a versatile platform that is particularly amenable for the exploration of topological spin solitons in real space such as skyrmions. First identified in non-centrosymmetric bulk materials, the rapidly growing zoology of materials systems hosting skyrmions and related topological spin solitons includes bulk compounds, surfaces, thin films, heterostructures, nano-wires and nano-dots. This underscores an exceptional potential for major breakthroughs ranging from fundamental questions to applications as driven by an interdisciplinary exchange of ideas between areas in magnetism which traditionally have been pursued rather independently. The skyrmionics roadmap provides a review of the present state of the art and the wide range of research directions and strategies currently under way. These are, for instance, motivated by the identification of the fundamental structural properties of skyrmions and related textures, processes of nucleation and annihilation in the presence of non-trivial topological winding, an exceptionally efficient coupling to spin currents generating spin transfer torques at tiny current densities, as well as the capability to purpose- design broad-band spin dynamic and logic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗