Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “temperature effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Proxy quality control of biomass particles using thermogravimetric analysis and Gaussian process regression models

Abstract The temperature experienced by reactants during preparation in a reactor is a key component in determining the yield and homogeneity of usable chemical products such as biomass particles. Thermocouples with sensors can be used to monitor spatial temperature gradients within reactors but these sensors are often too expensive and/or invasive. The present work proposes a strategy to identify optimal machine learning models to infer the maximum effective temperature experienced by particles during oxidative biomass torrefaction using key thermochemical combustion parameters. The maximum rate of weight loss, the corresponding temperature, and fixed carbon content on a dry‐ash‐free basis are used as literature‐based predictor variables obtained from thermogravimetric analysis. The evaluation of 24 machine‐learning models using the standard tenfold cross‐validation method suggests that the exponential Gaussian process regression (GPR) model is the most effective, followed by other GPR models. These high‐performing GPR models were also utilized to predict the effective preparation temperature distribution of reactor‐produced biomass particles under eight conditions of varying residence time and air‐to‐biomass ratio. The effective preparation temperature and residence time of individual biomass particles were then encoded into the torrefaction severity factor and used to estimate the energy yield of the reactor output as a novel quality control method. © 2023 The Authors. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.

09 BIOMASS FUELS↗

Effects of the CPT-even and Lorentz violation on the Bhabha scattering at finite temperature

In this paper a Lorentz-violating CPT-even non-minimal coupling term is considered. A new interaction term between fermions and photons emerges. In this context, the differential cross-section for Bhabha scattering at finite temperature is calculated. The temperature effects are introduced using the Thermo-Field Dynamics (TFD) formalism. It is shown that the differential cross-section is changed due to both effects, Lorentz violation and finite temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Imaging the earth's magnetosphere - Effects of plasma flow and temperature

The effects of Doppler shifting on the line centers of the magnetospheric O(+) cross section are investigated, and the resulting structure of the scattering rate as a function of bulk density is explained. Whereas the Doppler shifting frequently results in a decrease of the scattering rate, it is demonstrated that for certain drift speeds the overlap of the cross section and the solar intensity profile can lead to an increased rate, thus enhancing the relative brightness of the image above that obtained when v(p) is zero. Simulated images of the magnetosphere are obtained which are used to show quantitively how the magnetospheric image responds to variations in plasma drift speed and temperature. Changes in the brightness of the magnetospheric images also depend on the variability of the solar flux at 83.4 nm. In regions where there are plasma drifts, the brightness in the image is governed by the structure of the scattering rate, assuming a fixed temperature.

Garrido, D. E.↗

The Influence of Soil Properties on Sea-Breeze Circulations in the Southeast U.S.

Sea-breeze circulations (SBCs) are common weather phenomena at and near coastal regions. They form because of a thermal gradient between the land surface at the coast and the sea surface. In a mid-day regime, a “thermal low” generated at the warm coast will lead to rising air motion, creating a wind shift coming from the sea near the surface displacing the coastal air. A “return flow” moving back towards the sea is generated by upper-level divergence because of the rising motion from the thermal low. SBCs propagate and serve as a method of urban pollutant dispersion in the Los Angeles region of California and are constrained to the coast due to the topography of surrounding mountains serving as a boundary for further inland propagation. Within the northeast U.S. SBCs are seen in the warm season but tend to remain coastally bound due to Coriolis distortion over long distances. Within the southeast U.S. (SEUS), the paradigmatic example of SBCs occurs over the Florida peninsula, where thunderstorms form on a nearly daily occurrence due to the convergence of SBCs from the east and west sides of the peninsula. However, there are further examples of sea-breezes in the SEUS that warrant study. Within the region bordering the SEUS and the Mid-Atlantic, just east of the southern Appalachian Mountains, warm-season SBCs form at the coast of Georgia and the Carolinas. Relatively flat topography ~150-200km inland allows for mostly unimpeded inland SBC propagation. Through visual analysis, Viner et al. catalogued several SBCs that propagated as far inland as the Central Savannah River Area surrounding Augusta, Georgia. Wermter et al. found that while the land-sea thermal gradient at the coast can influence coastal SBC genesis, the inland-coastal thermal gradient over the land is the primary influencer on the speed and depth of inland propagation of SBCs in this region. Additionally, soil moisture itself is a known correlative factor to sea-breeze formation, as it influences the soil temperature and the thermal gradient needed for SBC genesis and inland penetration. Physick determined that higher latent heat fluxes associated with wetter soil dampen the land-sea thermal gradient and suppress the formation of a SBC. Physick determined that higher latent heat fluxes associated with wetter soil dampen the land-sea thermal gradient and suppress the formation of a SBC. Conversely, drier soil enhances the thermal gradient and promotes SBC formation. However, while there is an inverse relationship between soil moisture and SBCs, higher soil moisture can actually promote more convective rainfall following a SBC if it does not significantly impact the thermal gradient. While the relationship between soil moisture and SBC formation has been conceptually explored and modeled numerically, there is a research gap in observed connections. The Soil Moisture Active Passive (SMAP) satellite mission has been operational since 2015 and has been used to create high-resolution re-analytical Level 4 (L4) datasets of soil moisture and soil temperature at different soil depths: the surface (0-5cm) and rootzone (0-1m). The surface soil temperature effectively acts as the “skin temperature” of the surface at these levels, and a spatial map of the land-sea as well as the coastal-inland thermal gradients can be represented. SMAP data are also assimilated in some atmospheric models such at the High Resolution Rapid Refresh (HRRR) mesoscale model. We propose leveraging the use of SMAP products to fill in spatial gaps left by weather and mesonet stations within the SEUS region, as well as assessing the effectiveness of utilizing SMAP products towards SBC forecasting in both deterministic and machine learning (ML) models.

58 GEOSCIENCES↗

Predation by a ciliate community mediates temperature and nutrient effects on a peatland prey prokaryotic community

Temperature significantly impacts microbial communities’ composition and function, which plays a vital role in the global carbon cycle that determines climate change. Nutrient influxes often accompany rising temperatures due to human activity. While ecological interactions between different microorganisms could shape their response to environmental change, we do not understand how predation may influence these responses in a warmer and increasingly nutrient-rich world. Here, we assess whether predation by a ciliate community of bacterial consumers influences changes in the diversity, biomass, and function of a freshwater prokaryotic community under different temperature and nutrient conditions. We found that predator presence mediates the effects of temperature and nutrients on the total prokaryotic community biomass and composition through various mechanisms, including direct and indirect effects. However, the total community function was resilient. Our study supports previous findings that temperature and nutrients are essential drivers of microbial community composition and function but also demonstrates how predation can mediate these effects, indicating that the biotic context is as important as the abiotic context to understanding microbial responses to novel climates.

ciliates↗

Liquid propellant gas generators

The design of gas generators intended to provide hot gases for turbine drive is discussed. Emphasis is placed on the design and operation of bipropellant gas generators because of their wider use. Problems and limitations involved in turbine operation due to temperature effects are analyzed. Methods of temperature control of gas turbines and combustion products are examined. Drawings of critical sections of gas turbines to show their operation and areas of stress are included.

Source record↗

IUE spectra of G0 V-G5 V solar-type stars

An atlas of IUE short-wavelength spectra for a set of 14 bright G0 V-G5 V stars are presented, and it is shown that these manifest a range of qualitatively different chromospheric and transition region spectra and significant differences in radiative flux originating at the temperature minimum level. A comprehensive survey of observational data and physical parameters of these stars has been performed, and tabular summaries of the data are presented. It is concluded that the UV continuum longward of about 1600 A is a diagnostic of the temperature minimum. A considerable range of minimum temperature for stars of similar effective temperature and spectral type is found. The temperature minimum of the sun is highly structured on spatial scales of about one arcsec.

Haisch, B. M.↗

Collisional Effects on Magnesium-rich Minerals found in Comets and Asteroids

While generally touted to be the least-altered bodies remaining from the age of the solar system's formation, comets and asteroids have undergone evolutionary processing throughout the 4.5-billion-year lifetime of the solar system. They have suffered the effects of collisions by impactors ranging in size from micrometeoroids to other comets and asteroids. As such, we must ask ourselves: can we detect these evolutionary effects remotely through telescopic observations? With this in mind, a suite of experiments were conducted, impacting magnesium-rich minerals as analogues to those that have been detected in the spectra of both asteroid surfaces and in the dust of cometary comae, including forsterite (Mg2SiO4, olivine), orthoenstatite (Mg2SiO3, pyroxene), diopside (MgCaSi2O6, monoclinic pyroxene), and magnesite (MgCO3, carbonate). These minerals were impacted at velocities ranging from 2.0 km/s to 2.8 km/s using the vertical gun in the Experimental Impact Laboratory (EIL) at NASA Johnson Space Center. These speeds mimic typical velocities of impacts occurring in the Kuiper belt [1]. Two classes of projectile were used: spherical alumina ceramic, whose density mimics that of rock, and cylinders made from the same material that they impacted (e.g., forsterite impactors for forsterite targets, etc.). The peak shock pressure varies significantly, depending on the target and impactor materials and the velocity; thus, shock effects differed in targets impacted at the same velocity but with compositionally different projectiles. The results indicate both: (a) how varying the impactor-density might change the outcome from a scientific viewpoint, as well as (b) possible contamination effects of the ceramic projectile in the resultant spectra of the target minerals from an experimental perspective. Temperature effects were also investigated by impacting samples at both 25 deg. and -25 deg. to: (a) probe whether the varying temperatures experienced by small bodies plays a role in the resultant spectra, and (b) constrain necessary experimental parameters. Analysis of Fourier Transform Infrared (FTIR) spectra obtained from the experimentally shocked materials shows clear indications of spectral shifts in wavelength, as well as a change in relative peak strengths of the spectral signatures at one wavelength compared with another, in all minerals except magnesite. Samples of the forsterite and orthoenstatite that displayed the spectral changes were examined with a transmission electron microscope, which revealed evidence of planar dislocations. The density of the dislocations in the experimentally shocked minerals mimicked the dislocation densities measured in both forsterite and enstatite grains recovered from Comet Wild 2 by the Stardust mission [2, 3, 4]. Further discussion on analyses of peak shock pressure and temperature-dependent effects can be found in Jensen et al., this meeting

Lederer, S.↗

Efficient numerical method for computation of the thermohydrodynamics of laminar lubricating films

The purpose of this paper is to describe an accurate, yet economical, method for computing temperature effects in laminar lubricating films in two dimensions. Because of the marked dependence of lubricant viscosity on temperature, the effect of viscosity variation both across and along a lubricating film can dwarf other deviations from ideal constant-property lubrication. In practice, a thermohydrodynamics program will involve simultaneous solution of the film lubrication problem, together with heat conduction in a solid, complex structure. In pursuit of computational economy, techniques similar to those for Gaussian quadrature are used; it is shown that, for many purposes, the use of just two properly positioned temperatures (Lobatto points) characterizes the transverse temperature distribution.

Elrod, H. G.↗

Michelson Interferometer (MINT)

MINT is a Michelson interferometer designed to measure the thermal emission from the earth at high spectral resolution (2/cm) over a broad spectral range (250-1700/cm, 6-40 mu m) with contiguous 3-pixel wide (12 mrad, 8 km field of view) along-track sampling. MINT is particularly well suited for monitoring cloud properties (cloud cover, effective temperature, optical thickness, ice/water phase, and effective particle size) both day and night, as well as tropospheric water vapor, ozone, and temperature. The key instrument characteristics that make MINT ideally suited for decadal monitoring purposes are: high wavelength to wavelength precision across the full IR spectrum with high spectral resolution; space-proven long-term durability and calibration stability; and small size, low cost, low risk instrument incorporating the latest detector and electronics technology. MINT also incorporates simplicity in design and operation by utilizing passively cooled DTGS detectors and nadir viewing geometry (with target motion compensation). MINT measurement objectives, instrument characteristics, and key advantages are summarized in this paper.

Lacis, Andrew↗

Atmospheric Temperature Inversions and He ι 5876 Core Profile Structure in White Dwarfs

Here we report distinctive core profiles in the strongest optical helium line, He ι λ5876, from high-resolution high-sensitivity observations of spectral type DB white dwarfs. By analyzing a sample of 40 stars from Keck/HIRES and VLT/UVES, we find the core appearance to be related to the degree of hydrogen and heavy element content in the atmosphere. New Ca K-line measurements or upper limits are reported for about half the sample stars. He ι λ5876 emission cores with a self-reversed central component are present for those stars with relatively low hydrogen abundance, as well as relatively low atmospheric heavy element pollution. This self-reversed structure disappears for stars with higher degrees of pollution and/or hydrogen abundance, giving way to a single absorption core. From our model atmospheres, we show that the self-reversed emission cores can be explained by temperature inversions in the upper atmosphere. We propose that the transition to a single absorption core is due to the additional opacity from hydrogen and heavy elements that inhibits the temperature inversions. Our current models do not exactly match the effective temperature range of the phenomenon or the amplitude of the self-reversed structure, which is possibly a result of missing physics such as 3D treatment, convective overshoot, and/or non-LTE effects. The He ι λ5876 line structure may prove to be a useful new diagnostic for calibrating temperature profiles in DB atmosphere models.

79 ASTRONOMY AND ASTROPHYSICS↗