Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “targeted”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Experimental Impacts into Strength-Layered Targets: Ejecta Kinematics and Crater Morphometry

Impact craters can serve as probes of the subsurface structure of a planetary body and provide hints about a target's properties. Crater morphology, for example, can be used to estimate the thickness of a regolith layer above a more competent unit. Small lunar craters in the maria show a morphological progression from a simple bowl shape to flat-floored and concentric as crater diameter increases for a given regolith thickness. The final shape is a result of the subsurface flow-field initiated as the projectile transfers its energy and momentum to the target surface. In strength-layered targets, such as the lunar maria, the substrate modifies the flow field and thereby the excavation of the crater. Here we report on a series of experimental impacts into targets composed of a layer of loose sand above a stronger substrate. As we varied the sand's thickness, we imaged individual ejecta trajectories as the craters grew, from which we derived ejection-speed scaling relationships. In addition, we used a 3D scanner to construct topographic maps of the substrate, pre-impact target, and post-impact surface. This permitted us to examine the final craters' morphologies and morphometries with respect to the original stratigraphy of the target. As expected, craters became shallower and smaller as the sand's thickness decreased, transitioning from bowl-shaped to concentric as observed on the Moon. Subtle and important details show that the stronger substrate affected the subsurface flow-field by redirecting material upward and outward even when the interface was still well below the final crater's floor. Compared to the control target (loose sand only), the stronger substrate below the sand layer resulted in a much more complex pattern of ejecta. While most of the ejected material was still contained within a typical outward-moving curtain, a number of ejected particles moved along low-speed, high-angle (near 90°) trajectories. The number of these high-angle trajectories increased as the sand layer thinned, perhaps implying that self-secondary cratering would require the presence of a strong subsurface layer below the impact site. Such results refine our understanding of crater excavation in layered targets with implications for ejecta deposits and final crater shapes observed on the Moon.

Jennifer L B Anderson↗

Targets and processes for fabricating same

In particular embodiments, the present disclosure provides targets including a metal layer and defining a hollow inner surface. The hollow inner surface has an internal apex. The distance between at least two opposing points of the internal apex is less than about 15 .mu.m. In particular examples, the distance is less than about 1 .mu.m. Particular implementations of the targets are free standing. The targets have a number of disclosed shaped, including cones, pyramids, hemispheres, and capped structures. The present disclosure also provides arrays of such targets. Also provided are methods of forming targets, such as the disclosed targets, using lithographic techniques, such as photolithographic techniques. In particular examples, a target mold is formed from a silicon wafer and then one or more sides of the mold are coated with a target material, such as one or more metals.

36 MATERIALS SCIENCE↗

Targets and processes for fabricating same

In particular embodiments, the present disclosure provides targets including a metal layer and defining a hollow inner surface. The hollow inner surface has an internal apex. The distance between at least two opposing points of the internal apex is less than about 15 .mu.m. In particular examples, the distance is less than about 1 .mu.m. Particular implementations of the targets are free standing. The targets have a number of disclosed shaped, including cones, pyramids, hemispheres, and capped structures. The present disclosure also provides arrays of such targets. Also provided are methods of forming targets, such as the disclosed targets, using lithographic techniques, such as photolithographic techniques. In particular examples, a target mold is formed from a silicon wafer and then one or more sides of the mold are coated with a target material, such as one or more metals.

42 ENGINEERING↗

Targets and processes for fabricating same

In particular embodiments, the present disclosure provides targets including a metal layer and defining a hollow inner surface. The hollow inner surface has an internal apex. The distance between at least two opposing points of the internal apex is less than about 15 .mu.m. In particular examples, the distance is less than about 1 .mu.m. Particular implementations of the targets are free standing. The targets have a number of disclosed shaped, including cones, pyramids, hemispheres, and capped structures. The present disclosure also provides arrays of such targets. Also provided are methods of forming targets, such as the disclosed targets, using lithographic techniques, such as photolithographic techniques. In particular examples, a target mold is formed from a silicon wafer and then one or more sides of the mold are coated with a target material, such as one or more metals.

36 MATERIALS SCIENCE↗

Special Actinide Recovery from Mark-18A Target Material

The US Department of Energy (DOE) manages an inventory of materials that contains a range of long-lived radioactive isotopes that were produced from the 1960s through the 1980s by irradiating targets in production reactors at the Savannah River Site (SRS) to produce special heavy isotopes for DOE programmatic use, scientific research, and industrial and medical applications. During the late 1960s, one of the production reactors was configured to operate in a very high flux mode, and >8 kg of 242Pu plutonium contained in Mark-18A (Mk-18A) targets was irradiated to produce 252Cf for use in neutron source applications. Twenty-one targets were processed at the Oak Ridge National Laboratory (ORNL) to recover the 252Cf, heavy curium (i.e., curium rich in 246Cm through 248Cm), and 244Pu. Sixty-five of the Mark-18A targets were not processed and are currently in wet storage at SRS. DOE’s Office of Nuclear Materials Integration (ONMI) established a Mk-18A Target Material Recovery Program (MTMRP) to separate and preserve the unique materials in these targets. Evaluations are also under way to determine whether additional rare long-half-life fission product isotopes present in the targets in much smaller quantities, such as 93Zr, can be economically recovered. These evaluations include assessment of the quality, value, and demand of the materials; process modifications required to facilitate recovery; and the incremental costs for their recovery from the Mk-18A targets.

Patton, Bradley↗

Targets and processes for fabricating same

In particular embodiments, the present disclosure provides targets including a metal layer and defining a hollow inner surface. The hollow inner surface has an internal apex. The distance between at least two opposing points of the internal apex is less than about 15 .mu.m. In particular examples, the distance is less than about 1 .mu.m. Particular implementations of the targets are free standing. The targets have a number of disclosed shaped, including cones, pyramids, hemispheres, and capped structures. The present disclosure also provides arrays of such targets. Also provided are methods of forming targets, such as the disclosed targets, using lithographic techniques, such as photolithographic techniques. In particular examples, a target mold is formed from a silicon wafer and then one or more sides of the mold are coated with a target material, such as one or more metals.

Adams, Jesse D.↗

Targets and processes for fabricating same

In one embodiment, the present disclosure provides a target or mold having one or more support arms coupled to a substrate. The support arm can be used in handling or positioning a target. In another embodiment, the present disclosure provides target molds, targets produced using such molds, and a method for producing the targets and molds. In various implementations, the targets are formed in a number of disclosed shapes, including a funnel cone, a funnel cone having an extended neck, those having Gaussian-profile, a cup, a target having embedded metal slugs, metal dotted foils, wedges, metal stacks, a Winston collector having a hemispherical apex, and a Winston collector having an apex aperture. In yet another embodiment, the present disclosure provides a target mounting and alignment system.

Malekos, Steven↗

Beam-Based Target Alignment for Mu2e

The Mu2e Experiment is a precision experiment at Fermi National Accelerator Laboratory, searching for charged lepton flavor violation (CLFV) in the conversion of a muon to an electron in the presence of an atomic nucleus. In order to achieve the expected single-event sensitivity of $3\times 10^{-17}$ , Mu2e will require an intense muon beam, generated via pion decay. These pions are the product of a proton beam striking a radiatively-cooled tungsten target. In order to maximize pion production and prevent target failure, the beam will have to be aligned with the target center to within 0.5 mm. The production target monitor (PTM) will ensure this alignment. The PTM consists of a series of proportional wire chambers (PWC’s) upstream and downstream of the production target. In this dissertation, I explain the requirements of this detector system and derive the decisions about which detector model to use and how they should be arranged from these requirements. After this, I describe my e xperience building the detectors and show an early use for them in the Mu2e proton beam. I also performed a study of the sensitivity and time resolution of this model of PWC and its electronics, and give the results here. I then describe a series of simulation campaigns which shed light on the interactions between the beam and the target, and how these interactions manifest on the downstream detectors. Finally, I give the target scanning procedure to be used to align the beam and target during experiment start up.

43 PARTICLE ACCELERATORS↗

Comparisons on thin and thick neutron target for low energy proton beam

As the progress on accelerator physics and neutronics, the compact neutron sources driven by low energy and high intensity beam are becoming extensively developed and researched all around the world. The neutron target of an accelerator driven neutron source is one of the key components, and the stability of the neutron target affect the operation and performance of the neutron facility. When a low energy proton is projected to the beryllium target, the main reaction is the inelastic scattering between the proton and extra-nuclear electrons. As the decreasing of proton energy, the rate of elastic scattering between proton and target nucleus begins to increase. When the energy of proton is very low, the pickup charge reaction begins to appear. Focus on the problems brought by high intensity proton beam such as proton implantation, radiation damages, heat deposition and gas production, we performed sufficient numerical simulations for both thin and thick target determined by proton range. The results show that the critical problem for thick target is the proton implantation, causing the forming of bubbles and beryllium flaked in vacuum. The thin target sacrifices a little neutron yield, but avoid the proton stopped in target, and decrease the radiation damage and energy deposition. (authors)

43 PARTICLE ACCELERATORS↗

Multi-Physics Coupling to Model a RbCl-RbCl-Ga Target Stack

A computational model has been developed to simulate the performance of the Los Alamos Isotope Production Facility's (IPF) routine production target configuration, which consists of two Inconel-encapsulated RbCl salt targets and one niobium-encapsulated gallium target separated by water cooling channels. The methodology involves iteratively coupling particle transport and thermal hydraulic codes to determine the time dependent behavior of the target. Phase and density changes seen in targets are known to impact beam penetration and distribution. In addition, evidence of energy distributions seen in experimental radionuclide yield measurements at IPF do not match those seen in previous MCNP predictions. Density reduction as a result of heat deposition affects proton energy loss along the particle's track, impacting both radionuclide yields and target design. Accurate modeling of the thermal behavior of these multi-phase targets and the corresponding impact on beam behavior will significantly improve our understanding of incident and exit proton energy distributions and resulting radionuclide yields in downstream targets. Thermal hydraulic modeling, including computational fluid dynamics (CFD) and heat transfer, was performed with ANSYS CFX while particle transport was performed with the Monte Carlo N-Particle code (MCNP). (authors)

07 ISOTOPE AND RADIATION SOURCES↗

Calculations and First Results Obtained with a SiC Prototype of the SPES Direct Target

In the framework of the SPES project at LNL [A. Bracco, A. Pisent (Ed.), REP 181/02, LNL-INFN, 2002], the realization of a direct ISOL Target for a mid-term radioactive ion beam facility is in progress. Using a primary proton beam of energy 40 MeV and intensity 0.2 mA, a high number of fission products will be obtained in the SPES multi-foil uranium carbide target, keeping a low power density deposition in the refractory matrix [A. Andrighetto, S. Cevolani, C. Petrovich, Eur. Phys J. A 25 (2005) 41]. The exotic species produced by Uranium fission in the target are collected in the ion source after the diffusion and the effusion processes. When short lived isotopes are produced it is very important to optimize the release properties of the target. To this purpose the RIBO code (radioactive ion beam optimiser) [M. Santana Leitner, A Monte Carlo Code to Optimize the Production of Radioactive Ion Beams by the ISOL Technique, PhD. Thesis, UPC-ETSEIB/CERN] has been used in order to estimate the target release efficiency for some neutron-rich nuclei. A SiC prototype of the target was recently produced at LNL and tested at ORNL using a 42 MeV proton beam. The yield of some aluminum isotopes was measured as a function of the target temperature. Some preliminary results of the data analysis will be presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fast ignition of inertial confinement fusion targets

Results of studies on fast ignition of inertial confinement fusion (ICF) targets are reviewed. The aspects of the fast ignition concept, which consists in the separation of the processes of target ignition and compression due to the synchronized action of different energy drivers, are considered. Criteria for the compression ratio and heating rate of a fast ignition target, the energy balance, and the thermonuclear gain are discussed. The results of experimental and theoretical studies of the heating of a compressed target by various types of igniting drivers, namely, beams of fast electrons and light ions produced under the action of a petawatt laser pulse on the target, a heavy-ion beam generated in the accelerator, an X-ray pulse, and a hydrodynamic flow of laser-accelerated matter, are analyzed. Requirements to the igniting-driver parameters that depend on the fast ignition criteria under the conditions of specific target heating mechanisms, as well as possibilities of practical implementation of these requirements, are discussed. The experimental programs of various laboratories and the prospects of practical implementation of fast ignition of ICF targets are reviewed. To date, fast ignition is the most promising method for decreasing the ignition energy and increasing the thermonuclear gain of an ICF plasma. A large number of publications have been devoted to investigations of this method and adjacent problems of the physics of igniting drivers and their interaction with plasma. This review presents results of only some of these studies that, in the author's opinion, allow one to discuss in detail the main physical aspects of the fast ignition concept and understand the current state and prospects of studies in this direction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Concept for a Low Pressure Noble Gas Fill Intervention in the IFE Fusion Test Facility (FTF) Target Chamber

An engineering evaluation has been initiated to investigate conceptual engineering methods for implementing a viable gas shield strategy in the Fusion Test Facility (FTF) target chamber. The employment of a low pressure noble gas in the target chamber to thermalize energetic helium ions prior to interaction with the wall could dramatically increase the useful life of the first wall in the FTF reactor1. For the purpose of providing flexibility, two target chamber configurations are addressed: a five meter radius sphere and a ten meter radius sphere. Experimental studies at Nike have indicated that a low pressure, ambient gas resident in the target chamber during laser pulsing does not appear to impair the ability of laser light from illuminating targets2. In addition, current investigations into delivering, maintaining, and processing low pressure gas appear to be viable with slight modification to current pumping and plasma exhaust processing technologies3,4. Employment of a gas fill solution for protecting the dry wall target chamber in the FTF may reduce, or possibly eliminate the need for other attenuating technologies designed for keeping He ions from implanting in first wall structures and components. The gas fill concept appears to provide an effective means of extending the life of the first wall while employing mostly commercial off the shelf (COTS) technologies. Although a gas fill configuration may provide a methodology for attenuating damage inflicted on chamber surfaces, issues associated with target injection need to be further analyzed to ensure that the gas fill concept is viable in the integrated FTF design5. In the proposed system, the ambient noble gas is heated via the energetic helium ions produced by target detonation. The gas is subsequently cooled by the chamber wall to approximately 800oC, removed from the chamber, and processed by the chamber gas processing system (CGPS). In an optimized scenario of the above stated concept, the chamber wall acts as the primary heat exchanger. During removal, gas is pumped through the laser ports by turbo molecular-drag pumps (TM-DP). For the purpose of reducing organic based lubricants and seals, a magnetically levitated TM-DP is being investigated with pump manufacturers. Currently, magnetically levitated turbo molecular pumps are commercially available. The pumps will be exposed to thermal loads and ionizing radiation (tritium, Ar-41, post detonation neutrons). Although the TM-DP's will be subjected to these various radiations, current designs for similar pumping devices have been hardened and have the ability of locating control electronics in remote radiation shielded enclosures4. The radiation hardened TM-DP's will be 5 required to operate with minimal maintenance for periods of up to 18 continuous months. As part of this initial investigation for developing a conceptual engineering strategy for a gas fill solution, commercial suppliers of low pressure gas pumping systems have been contacted and engaged in this evaluation. Current technology in the area of mechanical pumping systems indicates that the development of a robust pumping system to meet the requirements of the FTF gas fill concept is within the limits of COTS equipment3,4.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neutron capture of UO 2 targets prepared by spin-coating assisted combustion synthesis

Two uranium dioxide (UO 2 ) targets of (414 ± 23) nm and (1092 ± 93) nm thicknesses were prepared on 6061 aluminum alloy and puratronic grade aluminum backing materials. The targets were deposited with a novel method combining spin coating and solution combustion synthesis (SCS). The target layers consisted of small (3–7 nm) UO 2 grains and uniformly distributed ultra-small (1–3 nm) pores. The prepared targets were tested at the Los Alamos National Laboratory’s LANSCE facility for neutron irradiation damage and suitability for neutron capture experiments. The samples showed no signs of target material loss after the irradiation. However, irradiation caused a significant increase in the grain size (4–10 nm), as well as upward mass diffusion and coalescence of the pores due to the thermal spikes. The magnesium in the aluminum 6061 alloy backing also diffused into the UO 2 layer during neutron irradiation. The structural changes in the target after the irradiation do not affect the data from neutron capture. As a result, the new method can be used more broadly to prepare other actinide targets for nuclear physics experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Rapid Targeted Quantitation of Protein Overexpression with Direct Infusion Shotgun Proteome Analysis (DISPA-PRM)

While much effort has been placed on comprehensive quantitative proteome analysis, certain applications demand measurement of only a few target proteins from complex systems. Traditional approaches to targeted proteomics rely on nano-liquid chromatography (nLC) and targeted mass spectrometry (MS) methods, e.g., parallel reaction monitoring (PRM). However, the time requirement for nLC can limit throughput of targeted proteomics. To achieve rapid and high-throughput targeted methods, here we show that nLC separations can be eliminated and replaced with direct infusion shotgun proteome analysis (DISPA) using high-field asymmetric waveform ion mobility spectrometry (FAIMS) with PRM. We demonstrate application of DISPA-PRM for rapid targeted quantification of bacterial enzymes utilized in the production of biofuels by monitoring temporal expression in 72 metabolically engineered bacterial cultures in under 2.5 hours, with a measured dynamic range >1200-fold. Here, we conclude that DISPA-PRM presents a valuable innovative tool with results comparable to nLC-MS/MS, enabling fast and rapid detection of targeted proteins in complex mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Target normal sheath acceleration of foil ions by laser-trapped hot electrons from a long subcritical-density preplasma

In a long subcritical density plasma, an ultrashort ultraintense laser pulse can self-organize into a fast but sub-relativistic propagating structure consisting of the modulated laser light and a large number of trapped electrons from the plasma. Upon impact of the structure with a solid foil target placed in the latter, the remaining laser light is reflected, but the dense and hot trapped electrons pass through the foil, together with the impact-generated target-frontsurface electrons to form a dense hot electron cloud at the back of the target suitable for enhancing target normal sheath acceleration of the target-backsurface ions. The accelerated ions are well collimated and of high charge and energy densities, with peak energies a full order of magnitude higher than that from target normal sheath acceleration without the subcritical density plasma. In the latter case, the space-charge field accelerating the ions is limited since they are formed only by the target-frontsurface electrons during the very short instant of laser reflection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Uniformity simulation of multiple-beam irradiation of a spherical laser target with the inclusion of radiation absorption and refraction

We consider the physicomathematical model for the simulation of the angular laser flux distribution in a spherical target with the inclusion of radiation refraction in the corona. The irradiation uniformity is simulated using the target irradiation scheme on a megajoule multiple-beam laser facility. Calculations are made of the time-dependent angular distribution of absorbed flux and of the angular distribution of the time-integrated characteristic – the absorbed energy with allowance for the temporal shape of laser pulses – as well as of the time dependence of absorption efficiency. Different versions of target irradiation are considered. Under conventional irradiation it is assumed that the axes of all laser beams of equal energy pass through the target centre and the irradiation nonuniformity is due to its geometry only. Also examined are three unconventional irradiation versions: when there is a small spread of beam energies, when the target is displaced from the common beam pointing centre, and when the beam axes have small random deviations from the target centre. It is shown that the nonuniformity of the angular distribution of absorbed flux is greatest when the target is displaced from the beam pointing centre. (interaction of laser radiation with matter. laser plasma)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evolution of the Design and Fabrication of Astrophysics Targets for Turbulent Dynamo (TDYNO) Experiments on OMEGA

Although the overall function of a campaign’s primary target design may remain unchanged, the components and structure often evolve from one shot day to the next to better meet experimental goals. The target fabrication engineer’s involvement in this evolution can be important for advising modifications in order to improve and simplify assembly at the same time. Highly complex targets are constructed by General Atomics (GA) for astrophysics experiments conducted by the University of Chicago at the OMEGA laser facility. Several novel target components are fabricated, precision-assembled, and extensively measured in support of this campaign, and have evolved over the last three years to improve both the science and assembly. Examples include unique laser machined polyimide grids to enhance plasma mixing at target center, precision micromachined cylindrical shields that also act as component spacers, drawn glass target supports to suspend physics packages at critical distances, and tilted pinholes for collimated proton radiography. Target component fabrication and evolution details for this turbulent dynamics (TDYNO) campaign are presented, along with precision-assembly techniques, metrology methods, and considerations for future TDYNO experiments on OMEGA.

42 ENGINEERING↗