Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stability properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Investigation of Thermoplastic Polyurethanes Synthesized via Two Different Prepolymers

The man aim of this work was to investigate the effect of the molecular weight of polyols, mixture of prepolymers, and [NCO]/[OH] molar ratio used during the prepolymer chain extending step on the chemical structure, thermomechanical and mechanical properties, and thermal stability of thermoplastic poly(ether-urethane)s In this work thermoplastic poly(ether-urethane)s were synthesized by using polyols with a various molecular weight, 4,4′-diphenylmethane diisocyanate and bio-based glycol. Materials were obtained by a two-step method. The tests were carried out for polyurethanes obtained from a mixture of prepolymers and for reference samples. In the case of materials obtained with using mixture of prepolymers, the ratio of both prepolymers was determined on 50/50 weight percent. Soft segments of materials prepared with using mixture consist of two different polyols. The chemical structure was analyzed using FTIR spectroscopy. The Gaussian deconvolution technique was used to study the hydrogen bonding as well as to decompose carbonyl region of three peaks in various TPUs. The thermal degradation behavior was investigated by using thermogravimetric analysis at heating rates of 10 °C/min. It was confirmed that the mixture of prepolymers has an effect of the degree of phase separation, thermal stability and selected properties of synthesized thermoplastic poly(ether-urethane)s.

36 MATERIALS SCIENCE↗

First-principles study of structural stability, electronic, optical and elastic properties of binary intermetallic: PtZr

Structural, electronic, optical and elastic properties of PtZr have been studied using the full-potential linearized augmented plane wave (FP-LAPW) method within density functional theory (DFT). The energy against volume and enthalpy vs. pressure variation in three different structures i.e. B{sub 1}, B{sub 2} and B{sub 3} for PtZr has been presented. The equilibrium lattice parameter, bulk modulus and its pressure derivative have been obtained using optimization method for all the three phases. Furthermore, electronic structure was discussed to reveal the metallic character of the present compound. The linear optical properties are also studied under zero pressure for the first time. Results on elastic properties are obtained using generalized gradient approximation (GGA) for exchange correlation potentials. Ductile nature of PtZr compound is predicted in accordance with Pugh’s criteria.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Impact of Humidity and Temperature on the Stability of the Optical Properties and Structure of MAPbI3, MA0.7FA0.3PbI3 and (FAPbI3)0.95(MAPbBr3)0.05 Perovskite Thin Films

In situ real-time spectroscopic ellipsometry (RTSE) measurements have been conducted on MAPbI3, MA0.7FA0.3PbI3, and (FAPbI3)0.95(MAPbBr3)0.05 perovskite thin films when exposed to different levels of relative humidity at given temperatures over time. Analysis of RTSE measurements track changes in the complex dielectric function spectra and structure, which indicate variations in stability influenced by the underlying material, preparation method, and perovskite composition. MAPbI3 and MA0.7FA0.3PbI3 films deposited on commercial fluorine-doped tin oxide coated glass are more stable than corresponding films deposited on soda lime glass directly. (FAPbI3)0.95(MAPbBr3)0.05 films on soda lime glass showed improved stability over the other compositions regardless of the substrate, and this is attributed to the preparation method as well as the final composition.

36 MATERIALS SCIENCE↗

Structural and physical properties of BiVO{sub 3}

We report the phase stabilization and properties of BiVO{sub 3} (BVO) thin films, grown on (001) SrTiO{sub 3} and LaAlO{sub 3}, using the pulsed laser deposition technique. Bi and V are in 3+ oxidation states as measured by using x-ray photoelectrons spectroscopy. BVO exhibits a Curie-Weiss paramagnetic behaviour and about −26 K Weiss temperature. This demonstrates the presence of a strong correlation effect due to the spin fluctuation. Additionally, these films exhibit a semiconducting behaviour owing to the thermally activated conduction process. A plausible explanation of the observed properties is presented by comparing with the closely related LaVO{sub 3} and other orthovanadates.

36 MATERIALS SCIENCE↗

A first principles study of structural stability, electronic structure and mechanical properties of ABeH{sub 3} (A = Li, Na)

Ab initio calculations are performed to investigate the structural stability, electronic structure and mechanical properties of ABeH{sub 3} (A = Li, Na) for three different crystal structures, namely orthorhombic (Pnma), monoclinic (P2{sub 1}/c) and triclinic (P-1) phase. Among the considered structures monoclinic (P2{sub 1}/c) phase is found to be the most stable one for all the three hydrides at ambient condition. The electronic structure reveals that these materials are wide band gap semiconductors. The calculated elastic constants indicate that these materials are mechanically stable at ambient condition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural stability, electronic structure and mechanical properties of actinide carbides AnC (An = U, Np)

Ab initio calculations are performed to investigate the structural stability, electronic structure and mechanical properties of actinide carbides AnC (An=U, Np) for three different crystal structures, namely NaCl, CsCl and ZnS. Among the considered structures, NaCl structure is found to be the most stable structure for these carbides at normal pressure. A pressure induced structural phase transition from NaCl to ZnS is observed. The electronic structure reveals that these carbides are metals. The calculated elastic constants indicate that these carbides are mechanically stable at normal pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Silicon-Based Anode and Method for Manufacturing the Same

A silicon-based anode comprising silicon, a carbon coating that coats the surface of the silicon, a polyvinyl acid that binds to at least a portion of the silicon, and vinylene carbonate that seals the interface between the silicon and the polyvinyl acid. Because of its properties, polyvinyl acid binders offer improved anode stability, tunable properties, and many other attractive attributes for silicon-based anodes, which enable the anode to withstand silicon cycles of expansion and contraction during charging and discharging.

Yushin, Gleb Nikolayevich↗

Structural stability, electronic structure and mechanical properties of alkali gallium hydrides AGaH{sub 4} (A = Li, Na)

Ab initio calculations are performed to investigate the structural stability, electronic structure and mechanical properties of alkali gallium hydrides AGaH{sub 4} (A = Li, Na) for three different crystal structures, namely tetragonal (P42{sub 1}c), tetragonal (P4{sub 2}/nmc) and monoclinic (P2{sub 1}/c). Among the considered structures, tetragonal (P42{sub 1}c) phase is found to be the most stable phase for these hydrides at normal pressure. A pressure induced structural phase transition from tetragonal (P42{sub 1}c) to tetragonal (P4{sub 2}/nmc) is observed. The electronic structure reveals that these hydrides are insulators. The calculated elastic constants indicate that these ternary imides are mechanically stable at normal pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing the structure, stability and hydrogen storage properties of calcium dodecahydro-closo-dodecaborate

Calcium borohydride can reversibly store up to 9.6 wt% hydrogen; however, the material displays poor cyclability, generally associated with the formation of stable intermediate species. In an effort to understand the role of such intermediates on the hydrogen storage properties of Ca(BH{sub 4}){sub 2}, calcium dodecahydro-closo-dodecaborate was isolated and characterized by diffraction and spectroscopic techniques. The crystal structure of CaB{sub 12}H{sub 12} was determined from powder XRD data and confirmed by DFT and neutron vibrational spectroscopy studies. Attempts to dehydrogenate/hydrogenate mixtures of CaB{sub 12}H{sub 12} and CaH{sub 2} were made under conditions known to favor partial reversibility in calcium borohydride. However, up to 670 K no notable formation of Ca(BH{sub 4}){sub 2} (during hydrogenation) or CaB{sub 6} (during dehydrogenation) occurred. It was demonstrated that the stability of CaB{sub 12}H{sub 12} can be significantly altered using CaH{sub 2} as a destabilizing agent to favor the hydrogen release. - Graphical abstract: Calcium dodecahydro-closo-dodecaborate, CaB{sub 12}H{sub 12} (1), was isolated by dehydration/desolvation of [Ca(H{sub 2}O){sub 7}][B{sub 12}H{sub 12}].H{sub 2}O (2) or [Ca(H{sub 2}O){sub 5}(MeCN){sub 2}][B{sub 12}H{sub 12}] (3). The crystal structure of 1 was determined by powder X-ray diffraction and confirmed by neutron vibrational spectroscopy and first-principles calculations. Hydrogen storage properties of 1 in the presence of calcium hydride were elucidated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of silica doped alumina catalyst support with superior thermal stability and unique pore properties

A facile, solvent-deficient, one-pot synthesis of a thermally stable silica-doped alumina, having high surface area, large pore volume and uniquely large pores, has been developed. Silica-doped alumina (SDA) was synthesized by adding 5 wt% silica from tetraethyl orthosilicate (TEOS) to aluminum isoproxide (AIP), a 1:5 mol ratio AIP to water, and a 1:2 mol ratio TEOS to water in the absence of a template. The structure of silica-doped alumina was studied by in situ high-temperature powder XRD, nitrogen adsorption, thermogravimetric analysis, solid-state NMR, and TEM. The addition of silica significantly increases the stability of γ-Al 2 O 3 phase to 1200 °C while maintaining a high surface area, a large pore volume and a large pore diameter. After calcination at 1100 °C for 2 h, a surface area of 160 m 2 /g, pore volume of 0.99 cm 3 /g, and a bimodal pore size distribution of 23 and 52 nm are observed. Compared to a commercial silica-doped alumina, after calcination for 24 h at 1100 °C, the surface area, pore volume, and pore diameter SDA are higher by 46, 155, and 94 %, respectively. Results reveal that Si stabilizes the porous structure of γ-Al 2 O 3 up to 1200 °C, while unstabilized alumina is stable to only 900 °C. From our data, we infer that Si enters tetrahedral vacancies in the defect spinel structure of alumina without moving Al from tetrahedral positions and forms a silica–alumina interface.

36 MATERIALS SCIENCE↗

Infrared Radiative Properties of Yttria-Stabilized Zirconia Thermal Barrier Coatings

The infrared (IR) transmittance and reflectance of translucent thermal barrier coatings (TBCs) have important implications for both the performance of these coatings as radiation barriers and emitters as well as affecting measurements of TBC thermal conductivity, especially as TBCs are being pushed to higher temperatures. In this paper, the infrared spectral directional-hemispherical transmittance and reflectance of plasma-sprayed 8wt% yttria-stabilized zirconia (8YSZ) TBCs are reported. These measurements are compared to those for single crystal YSZ specimens to show the effects of the plasma-sprayed coating microstructure. It is shown that the coatings exhibit negligible absorption at wavelengths up to about 5 micrometers, and that internal scattering rather than surface reflections dominates the hemispherical reflectance. The translucent nature of the 8YSZ TBCs results in the absorptance/emittance and reflectance of TBC-coated substrates depending on the TBC thickness, microstructure, as well as the radiative properties of the underlying substrate. The effects of these properties on TBC measurements and performance are discussed.

Eldridge, Jeff I.↗

Sonochemical Synthesis and Ion Transport Properties of Surfactant-Stabilized Carbon Nanotube Porins

Carbon nanotube porins (CNTPs), short segments of carbon nanotubes stabilized by a lipid coating, are a promising example of artificial membrane channels that mimic a number of key behaviors of biological ion channels. While the lipid-assisted synthesis of CNTPs may facilitate their subsequent incorporation into lipid bilayers, it limits the applicability of these pores in other self-assembled membrane materials and also precludes the use of large scale purified CNT feedstocks. In this report we demonstrate that CNTPs can be synthesized by sonochemical cutting of long CNT feedstocks in the presence of different surfactants, producing CNTS with transport properties identical to those obtained by the lipid-assisted procedure. Our results open up a large variety of synthetic routes for CNTP production.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electronic properties and carrier mobilities of 6,6,12-graphyne nanoribbons

Structures, stabilities, electronic properties and carrier mobilities of 6,6,12-graphyne nanoribbons (GyNRs) with armchair and zigzag edges are investigated using the self-consistent field crystal orbital method based on density functional theory. It is found that the 1D GyNRs are more stable than the 2D 6,6,12-graphyne sheet in the view of the Gibbs free energy. The stabilities of these GyNRs decrease as their widths increase. The calculated band structures show that all these GyNRs are semiconductors and that dependence of band gaps on the ribbon width is different from different types of the GyNRs. The carrier mobility was calculated based on the deformation theory and effective mass approach. It is found that the carrier mobilities of these GyNRs can reach the order of 10{sup 5} cm{sup 2} V {sup –1}s{sup –1} at room temperature and are comparable to those of graphene NRs. Moreover, change of the mobilities with change of the ribbon width is quite different from different types of the GyNRs.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of triethylene glycol stabilized Zn{sub x}Co{sub 1−x}Fe{sub 2}O{sub 4} nanoparticles

Highlights: ► Monodispersed TREG stabilized Zn{sub x}Co{sub 1−x}Fe{sub 2}O{sub 4} NP's were prepared via hydrothermal method. ► Zn{sub x0.6}Co{sub 0.4}Fe{sub 2}O{sub 4} NP's has superparamagnetic behavior like absence of saturation at high fields. ► The lattice parameter (a{sub o}) increases linearly with the addition of Zn and follows Vegard's law. -- Abstract: Zn substituted cobalt ferrite nanoparticles having formula of Zn{sub x}Co{sub 1−x}Fe{sub 2}O{sub 4} (x = 0.0–1.0) were prepared by hydrothermal technique. In this process, triethylene glycol was used as a solvent and surfactant, anhydrous sodium hydroxide was used as an alkalinity additive. Investigation of the structural, morphological and thermal properties were carried out using X-ray diffraction (XRD), infrared spectroscopy (FT-IR), transmission electron spectroscopy (TEM) and thermal analysis (TGA) respectively. The X-ray diffraction study reveals that the lattice constant of cobalt ferrite increases with the increase of Zn content. Magnetization measurements showed that as zinc concentration increases saturation magnetization initially stays constant and then decreases monotically. Samples having high zinc concentration (x ≥ 0.6) have superparamagnetic behavior like absence of saturation at high fields, low saturation magnetization values and immeasurable coercivity. These features were explained by surface spin disorder and canted spins.

36 MATERIALS SCIENCE↗

Fabrication and characterization of Co{sub 40}Fe{sub 22}Ta{sub 8-x}Y{sub x}B{sub 30} (x = 0, 2.5, 4, 6, and 8) metallic glasses with high thermal stability and good soft magnetic properties

Atomic structure and thermal behavior of Co{sub 40}Fe{sub 22}Ta{sub 8-x}Y{sub x}B{sub 30} (x = 0, 2.5, 4, 6, and 8) metallic glasses with good soft magnetic properties have been investigated by high-energy synchrotron X-ray diffraction and differential scanning calorimeter, respectively. It has been shown that the extension of the supercooled liquid region first increases and reaches a large value of 95 K and subsequently decreases as a function of Y content. Analysis of the structure factors and pair correlation functions in the reciprocal-space and real-space have indicated that the addition of Y noticeably changes the atomic structure and reduces the degree of the medium-range order. Magnetic measurements have implied that the introduction of Y enhances both saturation magnetization and Curie temperatures of the ribbons, while keeping their coercivity very small. The underlying mechanisms for changes in the atomic structure, improving the thermal stability and magnetic properties upon Y addition have been discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Novel silicon allotropes: Stability, mechanical, and electronic properties

One quasi-direct gap phase (Amm2) and three indirect gap phases (C2/m-16, C2/m-20, and I-4) of silicon allotropes are proposed. The detailed theoretical study on the structure, density of states, elastic properties, sound velocities, and Debye temperature of these four phases is carried out by using first principles calculations. The elastic constants of these four phases are calculated by strain-stress method. The elastic constants and the phonon calculations manifest all novel silicon allotropes in this paper are mechanically and dynamically stable at ambient condition. The B/G values indicate that these four phases of silicon are brittle materials at ambient pressure. The anisotropy properties show that C2/m-20 phase exhibits a larger anisotropy in its elastic modulus, shear elastic anisotropic factors, and several anisotropic indices than others. We have found that the Debye temperature of the four novel silicon allotropes gradually reduces in the order of C2/m-20 > Amm2 > C2/m-16 > I-4 at ambient pressure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dy{sup 3+}-doped Ga–Sb–S chalcogenide glasses for mid-infrared lasers

Highlights: • Novel Ga–Sb–S chalcogenide glasses doped with Dy{sup 3+} ions were synthesized. • The glasses show good thermal stability and excellent infrared transparency. • The glasses show low phonon energy and intense mid-infrared emissions. • The mid-infrared emissions have high quantum efficiency. • The mid-infrared emissions have large stimulated emission cross sections. - Abstract: Novel Ga–Sb–S chalcogenide glasses doped with different amount of Dy{sup 3+} ions were prepared. Their thermal stability, optical properties, and mid-infrared (MIR) emission properties were investigated. The glasses show good thermal stability, excellent infrared transparency, very low phonon energy (∼306 cm{sup −1}), and intense emissions centered at 2.95, 3.59, 4.17 and 4.40 μm. Three Judd–Ofelt intensity parameters (Ω{sub 2} = 8.51 × 10{sup −20} cm{sup 2}, Ω{sub 4} = 2.09 × 10{sup −20} cm{sup 2}, and Ω{sub 6} = 1.60 × 10{sup −20} cm{sup 2}) are obtained, and the related radiative transition properties are evaluated. The high quantum efficiencies and large stimulated emission cross sections of the MIR emissions (88.10% and 1.11 × 10{sup −20} cm{sup 2} for 2.95 μm emission, 75.90% and 0.38 × 10{sup −20} cm{sup 2} for 4.40 μm emission, respectively) in the Dy{sup 3+}-doped Ga–Sb–S glasses make them promising gain materials for the MIR lasers.

36 MATERIALS SCIENCE↗