Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “specific phase transitions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Physical properties of YbFe 5 P 3 with a quasi-one-dimensional crystal structure

We report basic physical properties of the quasi-one-dimensional heavy-fermion compound Yb Fe 5 P 3 . Its magnetic susceptibility follows a modified Curie-Weiss behavior at high temperatures with a Weiss temperature between - 5 and - 21 K depending on the direction of the applied magnetic field. Our single crystals of Yb Fe 5 P 3 are good metals with a room-temperature resistivity of ~ 140 μ Ω cm and a residual resistivity of less than 2 μ Ω cm. Below ~ 2 K the resistivity reflects the presence of strong quantum fluctuations, which is supported by specific heat measurements that show a similar strong enhancement in C / T at low temperatures reaching 1.5 J/mol K 2 below T = 0.5 K. No magnetic ordering is observed down to 80 mK. Magnetic fields up to 8 T rapidly suppress the magnetic fluctuations, while resistivity measurements under pressures up to 2.54 GPa indicate the enhancement of quantum fluctuations, although still no order is observed down to 0.3 K. Density functional theory calculations suggest the presence of electronically quasi-one-dimensional (1D) Fermi surface sheets together with three-dimensional electronic pockets. We suggest that the quasi-1D nature of this compound leads to an extended regime of large quantum fluctuations within the paramagnetic state prior to reaching a magnetic instability.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Toward a high-voltage fast-charging pouch cell with TiO 2 cathode coating and enhanced battery safety

Nickel-rich layered lithium transition metal oxides, LiNi x Co y Mn 1-x-y O 2 , are key cathode materials for high-energy lithium-ion batteries owing to their high specific capacity. However, the commercial deployment of nickel-rich oxides has been hampered by their poor thermostability and insufficient cycle life. In this work full batteries with uncoated and TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathodes and graphite anodes are compared in terms of electrochemical performance and safety behavior. The battery using a TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode exhibited better cyclic performance at high cutoff voltage. Electrochemical impedance spectroscopy analysis indicated that the TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode gave the battery a more stable charge transfer resistance. Transmission electron microscopy demonstrated that TiO 2 coating reduced accumulation of the cathode electrolyte interface layer on the particle surface. Time-of-flight secondary ion mass spectrometry demonstrated that TiO 2 coating markedly enhanced the interface stability of the cathode particle and protected the particle from serious etching by the electrolyte. Accelerating rate calorimetry revealed that the trigger temperature of thermal runaway for the battery using TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 as cathode material was 257 °C, which was higher than that of the battery with the uncoated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode (251 °C). In situ X-ray diffraction during heating demonstrated that this enhanced safety can be attributed to the suppressed phase evolution of the coated cathode material.

25 ENERGY STORAGE↗
DOE OSTI2020

Intermediate-Term Thermal Aging Effect Evaluation for Grade 92 and 316L at The LWR Relevant Temperature

Life extension of the existing nuclear reactors imposes accumulated damages, such as higher fluences and longer period of corrosion, to structural materials, which would result in significant challenges to the traditional reactor materials such as type 304 and 316 stainless steels. Advanced alloys with superior radiation resistance will increase safety margins, design flexibility, and economics for not only the life extension of the existing fleet but also new builds with advanced reactor designs. The Electric Power Research Institute (EPRI) teamed up with Department of Energy (DOE) on the Advanced Radiation Resistant Materials (ARRM) program, aiming to develop and test degradation resistant alloys from current commercial alloy specifications by 2021 to a new advanced alloy with superior degradation resistance in light water reactor (LWR)-relevant environments by 2024. Based on a comprehensive microstructure and property screening performed in Phase-1 of the ARRM program, a total of five alloys, together with 316L and X-750 as references, were down-selected for Phase-2 neutron irradiation studies. Because thermal aging could exert a synergistic effect on neutron irradiation due to the low neutron damage rate on the order of 10 –7 displacements per atom per second (dpa/s), Grade 92 (one of the five down-selected alloys) and two heats of 316L were selected in this task to study the effect of aging at 350°C for 12.5–12.7 kh on microstructure and mechanical properties. The aging time is approximately corresponding to 5 dpa neutron irradiation, which can be served as a reference for the 5-dpa-irradiated samples of the alloys to help understand the independent neutron damage influence on microstructure and mechanical properties. Optical microscopy and scanning electron microscopy were used for microstructural characterization. Hardness, tensile, Charpy impact toughness, and fracture toughness in the ductile regime of the aged samples were examined. The aging of Grade 92 led to the formation of many Laves phase in sizes of ~100–200 nm and resulted in some reduction in hardness and yield/ultimate tensile strength with some increases in uniform and total plastic elongations, which may have helped the enhancement of Charpy impact toughness, e.g., ~4 J increase in upper-shelf energy and 20.5°C reduction in ductile-brittle transition temperature compared with the unaged condition. The fracture toughness of the aged Grade 92 showed decent toughness of ~303 MPa√m (K Jq ) with ~87 tearing modulus at 22°C, which reduced to ~241 MPa√m (~20% reduction) with ~75 tearing modulus at 300°C. The two heats of 316L are differentiated by their amounts of δ-ferrite, i.e., ~1 vol% in heat T1103 and ~4 vol% in heat N5B8. The two heats of 316L were subjected to 15% cold work (CW) as this condition is often used in nuclear reactors to help trapping radiation-induced defects and thus postpone the steady state swelling stage. The aging did not result in any noticeable microstructure changes, except for possible segregations at grain boundaries that need to be further investigated. The aging resulted in slight reduction in hardness of 316L-T1103 and slight increase in hardness of 316L-N5B8, which is consistent with their tensile testing results. The 15%CW might have introduced some inhomogeneity, resulting in large standard deviations in hardness, which were reduced after the aging. The aged 316L followed the same trend as the unaged condition for the strength and elongation results from the tensile testing. Minimum elongations appeared within ~300–600°C, above which the elongations seem to increase. Unlike the negligible or minor changes in microstructure, hardness and tensile results of the two heats of 316L, their fracture toughness showed noticeable difference. The aged 316L-T1103 showed good toughness of ~350 MPa√m with ~80 tearing modulus at 22°C, which reduced to ~271 MPa√m (~23% reduction) with ~83 tearing modulus at 300°C. In contrast, the aged 316L-N5B8 showed lower toughness of ~244 MPa√m with ~53 tearing modulus at 22°C, which reduced to ~180 MPa√m (~26% reduction) with ~31 tearing modulus at 300°C. The preliminary results indicate that the presence of high volume of δ-ferrite would noticeable impair fracture toughness although it may not influence hardness and tensile properties.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Giant Magnetic and Optical Anisotropy in Cerium-Substituted M-Type Strontium Hexaferrite Driven by $4f$ Electrons

By performing density-functional calculations, we find a giant magnetocrystalline anisotropy (MCA) constant in abundant element cerium $\mathrm{Ce}$ substituted M-type hexaferrite, in the energetically favorable strontium site, assisted by a quantum confined electron transfer from $\mathrm{Ce}$ to a specific iron $\mathrm{2a}$ site. Remarkably, the calculated electronic structure shows that the electron transfer leads to the formation of $\mathrm{Ce}^{3+}$ and $\mathrm{Fe}^{2+}$ at the $\mathrm{2a}$ site producing an occupied $\mathrm{Ce}$$(4f^1)$ state below the Fermi level that adds a significant contribution to MCA and magnetic moment. A half $\mathrm{Ce}$ substitution forms a metallic state, while a full substitution retains the semiconducting state of the strontium hexaferrite (host). In the latter, the band gap is reduced due to the formation of charge-transferred states in the gap region of the host. The optical absorption coefficient shows an enhanced anisotropy between light polarization in parallel and perpendicular directions. Calculated formation energies, including the analysis of probable competing phases, and elastic constants confirm that both compositions are chemically and mechanically stable. With successful synthesis, the $\mathrm{Ce}$ hexaferrite can be an alternative high-performing critical-element-free permanent magnet material adapted for use in devices such as automotive traction drive motors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Study of the Mu2e sensitivity to the $\mu^-\rightarrow e^+$ conversion process

The Mu2e experiment at Fermilab (Batavia, IL) will search for the coherent neutrinoless conversion of a muon into an electron in the electric field of an aluminum atom. The conversion process results in a monochromatic electron with energy slightly below the muon rest mass ($E_e= 104.97$ MeV). The experiment goal is to improve the previous measurement by four orders of magnitude and reach a single event sensitivity of $3 \times 10^{-17} $ on the conversion rate with respect to the muon capture rate. \\ The experiment will deliver a very intense pulsed negative muon beam to an aluminum target to achieve a total number of $10^{18}$ stopped muons in three years of running. Production and transport of the muons are accomplished with a sophisticated magnetic system comprised of a Production, a Transport and a Detector solenoid, with the last one hosting a Straw-tube Tracker and a Crystal Calorimeter. The entire detector region is surrounded by a Cosmic Ray Veto system. Mu2e is und er construction at the Muon Campus of Fermilab. \\ The INFN italian group is responsible for the design and construction of the crystal calorimeter, which plays a crucial role in the Mu2e measurement, providing particle identification capabilities fundamental for the rejection of the different background sources that can mimic a conversion electron. The calorimeter information allows also to improve the tracking performances it provides a fast standalone trigger for the experiment.\\ After a long R\&D phase, the final drawings see a calorimeter comprised of 1348 pure CsI crystals arranged in two annular disks. Each crystal is readout by two custom UV-extended Silicon Photomultipliers (SiPMs). Performances of the selected components were verified with an electron beam test, carried out in 2017 at the Beam Test Facility (BTF) at the National Laboratories of Frascati, on a large size prototype of 51 crystals and 102 SiPMs, confirming excellent energy ($\sigma_{E}/E = \mathcal{O }(10\%)$) and timing ($\sigma_{T} <500$ ps) resolutions in a! greement with the Mu2e specifications.\\ In the first chapters of this thesis, I describe my involvement in the calorimeter activities, with particular emphasis on the data analysis of the prototype energy response and resolution, that I was personally leading. Moreover, a description of the tuning of the simulation and the careful data-MC comparison is also reported.\\ An auxiliary measurement that can be performed with Mu2e is the search for a Lepton Number Violation (LNV) process where the negatively charged muon converts, without neutrinos, into a positron, $\mu ^{-} +N(A,Z) \rightarrow $ e$^+ +N(A,Z-2)$. At the moment of writing, Neutrinoless Double Beta Decay (0$\nu \beta \beta$) has set the most stringent limit on the LNV processes (T$^{0\nu \beta \beta}_{1/2} > 1.1 \times 10^{26} $ yr at 90$\%$ CL) with the GERDA experiment. In 0$\nu \beta \beta$ a pair of free electrons is created in the transformation from a nucleus $(A, Z)$ into its daughter $(A, Z + 2)$, namely: $(A,Z)\rightarrow (A, Z+2) =2 e^-$. Similar transitions could proceed through the emission of a pair of positrons, double electron capture (EC), or EC and single emission of a positron, with the nucleus changing from $(A, Z)$ to $(A, Z - 2)$. All these variations are equally interesting when discussing of new Physics, since they all manifest a non-conservation of the number of leptons.\\ Moreover, recent studies show that, because of flavor effect, off-diagonal processes, such as the $\mu^- -e^+$ conversion, can have their rate enhanced with respect to processes occurring in the $e-e$ sector.\\ Mu2e will search for $\mu^- + Al(27,13) \rightarrow e^+ +Na(27,11)$, only considering ground state transition, producing a conversion positron with energy $E_{e^+}= 92.32 $ MeV.\\ This thesis is focused on this search. In particular, I developed an algorithm to account for the radiative corrections to be applied to the conversion positrons that resulted in a few percent reduction in s ignal acceptance.\\ One of the most prominent background to ! this sear! ch is the Radiative Muon Capture (RMC) $ \mu+ N(Z,A)\rightarrow \gamma + \nu_{\mu} + N(Z-1,A)$. The produced photon can convert, virtually or in the detector materials (in the following referred as internal or external conversion respectively) in an electron-positron pair, producing positrons with energies approaching the expected conversion energy. Experimental results from previous experiments indicate the RMC endpoint ($\kmax$) to be of $\sim$ 90 MeV. A precise modeling of this background is relevant due to the proximity of the photon spectrum endpoint to the positron conversion energy. The calorimeter group is obviously interested to reconstruct the RMC distribution having also the opportunity to improve the current knowledge of the process. \\ A toy MC has been developed to evaluate the number of $e^+$ from external RMC background in the signal window. Knowing this value and ev...

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Mapping the Complete Reaction Energy Landscape of a Metal–Organic Framework Phase Transformation

Crystalline materials undergo valuable phase transformations, and the energetic processes that underlie these transformations can be fully characterized through a combination of thermodynamic and kinetic studies. Here, we report the first complete reaction energy landscape of metal–organic framework (MOF) interpenetration, specifically in the phase transformation of NU-1200 to its doubly interpenetrated counterpart, STA-26. We characterized the thermodynamics of this phase transformation by pairing experiments with density functional theory (DFT) calculations. This analysis revealed that factors such as the increase in crystal density likely drive Zr- and Hf-NU-1200 to STA-26 interpenetration, while other chemical interactions such as steric repulsions prevent Th-NU-1200 from interpenetrating. Using time-resolved in situ X-ray diffraction, we monitored phase transformation reaction profiles and extracted quantitative kinetic information using the Avrami-Erofe’ev model. As a result, we obtained activation energies for the Zr- and Hf-NU-1200 transformations to Zr- and Hf-STA-26, respectively, revealing slower phase change kinetics for MOFs with stronger bonds. Finally, we paired the kinetic data with experimental observations to classify the mechanistic model of this phase transformation as partial dissolution. Here, we anticipate that this thermodynamic, kinetic, and mechanistic understanding will broadly inform further studies on the energetics of crystallization.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Isotope effect and critical magnetic fields of superconducting YH 6 : A Migdal-Eliashberg theory approach

The emergence of near-ambient temperature superconductivity under pressure in metal hydride systems has motivated a desire to further understand such remarkable properties, specifically critical magnetic fields. Here, YH 6 is suggested to be a departure from conventional superconductivity, due to apparent anomalous behavior. Using density functional calculations in conjunction with Migdal-Eliashberg theory we show that in YH 6 the critical temperature and the isotope effect under pressure, as well as the high critical fields, are consistent with strong-coupling conventional superconductivity, a property anticipated to extend to other related systems. Furthermore, strong-coupling corrections occur to the expected BCS values for the isotope effect coefficient (α), Ginzburg-Landau parameter [κ 1 ⁡(T)], London penetration depth [λ L (T)], electromagnetic coherence length [ξ⁡(T)], and the energy gap (Δ 0 ).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Inducing Fe moment in LaFeSi with p-block element substitution

We studied the LaFeSi phase using density functional theory based full-potential linearized augmented plane wave (FP-LAPW) method. Specifically we examined the effect of p-element substitution on the stability and magnetic properties focusing on pathways to induce Fe magnetic moments. We demonstrate that either partial or complete substitutions at the Si 2 c-site by several p-block elements lead to non-zero Fe moments. Our theoretical study shows that partially substituted LaFeSi 1-y Ga y and LaFeSi 1-y Al y are more thermodynamically stable than the fully substituted LaFeGa and LaFeAl. We also found that the P substitutions, either partial or complete, have the most negative formation energies, however the compounds containing phosphorus are non-magnetic. Our work highlights a pathway toward manipulations of the otherwise quenched Fe-moments in LaFeSi-related compounds and help in advancing the potential magnetic functionalities of LaFeX compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Overview of the fusion nuclear science facility, a credible break-in step on the path to fusion energy

The Fusion Nuclear Science Facility (FNSF) is examined here as part of a two step program from ITER to commercial power plants. This first step is considered mandatory to establish the materials and component database in the real fusion in-service environment before proceeding to larger electricity producing facilities. The FNSF can be shown to make tremendous advances beyond ITER, toward a power plant, particularly in plasma duration and fusion nuclear environment. A moderate FNSF is studied in detail, which does not generate net electricity, but does reach the power plant blanket operating temperatures. The full poloidal Dual Coolant Lead Lithium (DCLL) blanket is chosen, with alternates being the Helium Cooled Lead Lithium (HCLL) and Helium Cooled Ceramic Breeder/Pebble Bed (HCCB/PB). Several power plant relevant choices are made in order to follow the philosophy of targeted technologies. Any fusion core component must be qualified by fusion relevant neutron testing and highly integrated non-nuclear testing before it can be installed on the FNSF in order to avoid the high probability of constant failures in a plasma-vacuum system. A range of missions for the FNSF, or any fusion nuclear facility on the path toward fusion power plants, are established and characterized by several metrics. A conservative physics strategy is pursued to accommodate the transition to ultra-long plasma pulses, and parameters are chosen to represent the power plant regime to the extent possible. An operating space is identified, and from this, one point is chosen for further detailed analysis, with R = 4.8 m, a = 1.2 m, IP = 7.9 MA, BT = 7.5 T, βN Gr = 0.9, fBS = 0.52, q95 = 6.0, H98 ∼1.0, and Q = 4.0. The operating space is shown to be robust to parameter variations. A program is established for the FNSF to show how the missions for the facility are met, with a He/H, a DD and 5 DT phases. The facility requires ∼25 years to complete its DT operation, including 7.8 years of neutron production, and the remaining spent on inspections and maintenance. The DD phase is critical to establish the ultra-long plasma pulse lengths. The blanket testing strategy is examined, and shows that many sectors have penetrations for heating and current drive (H/CD), diagnostics, or Test Blanket Modules (TBMs). The hot cell is a critical facility element in order for the FNSF to perform its function of developing the in-service material and component database. The pre-FNSF R&D is laid out in terms of priority topics, with the FNSF phases driving the time-lines for R&D completion. A series of detailed technical assessments of the FNSF operating point are reported in this issue, showing the credibility of such a step, and more detailed emphasis on R&D items to pursue. These include nuclear analysis, thermo-mechanics and thermal-hydraulics, liquid metal thermal hydraulics, transient thermo-mechanics, tritium analysis, maintenance assessment, magnet specification and analysis, materials assessments, core and scrape-off layer (SOL)/divertor plasma examinations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Machine learning assisted search for Fe–Co–C ternary compounds with high magnetic anisotropy

We employ a machine learning (ML)-guided framework to explore rare earth free magnetic materials, specifically focusing on Fe–Co–C ternary compounds for potential use in permanent magnets. Utilizing a specifically trained crystal graph convolutional neural network model, we efficiently screen a vast space of nearly a million substitutional structures to select 620 promising structures for further investigation by first-principles calculation. We predict five low-energy metastable Fe–Co–C compounds with formation energy less than 150 meV/atom above the convex hull. These compounds exhibit high magnetization (Js > 1.0 T) and significant magnetic anisotropy (K1 > 1.0 MJ/m3), making them promising candidates for permanent magnet applications. The phonon calculations indicate these compounds are dynamically stable. Our ML-guided framework demonstrates the utility of rapidly identifying novel materials with tailored magnetic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Non-Electricity Based Renewable Fuels: Theory and Computation for Solar Thermochemical Hydrogen

Dominated by photovoltaics and wind, current renewable energy sources generate mostly electricity, but 80% of the global final energy consumption occurs in form of fuels. Therefore, direct solar fuel generation would be a major breakthrough for the energy transition. Solar thermochemical hydrogen (STCH) is one of the very few potential routes towards scalable renewable fuels, but currently suffers from lack of an oxide working material that could optimally perform energy conversion within the thermodynamic boundary conditions. Theory and computation can contribute in two distinct ways, through materials search and discovery, but also by providing detailed mechanistic models for specific systems so to advance our understanding of possible design strategies. To enable high-throughput materials screening, we developed a defect graph neural network (dGNN) machine learning approach,[1] which accelerates the prediction of defect formation energies by replacing the tedious density functional theory (DFT) supercell calculations for all possible defect sites. This approach enables high-throughput database screening of oxides, which was integrated with thermodynamic modeling to extract the reduction entropies as additional selection criterion for STCH. Once potential candidate materials are identified, detailed models can guide materials design by predicting performance characteristics. One challenge is to quantitatively predict thermochemical equilibria at high concentrations when the redox active defects start to interact with each other, thereby impeding the formation of additional defects. Introducing a model for the free energy of defect interaction, parametrized on the basis of DFT data, we simulated the complete STCH redox cycle for (Sr,Ce)MnO3 alloys, achieving near-quantitative agreement with experimental data.[2] The analysis of these simulations reveals how defect interactions diminish the reduction entropy and H2 yield, suggesting to include these interactions in design considerations. Finally, we revisit the popular van't Hoff method for analyzing reduction enthalpies and entropies. This method is not ideal, as it involves a temperature-dependent convolution of gas-phase and solid-state entropies, causing uncertainties in the same order of magnitude as the physical quantities of interest. To avoid this problem, we suggest a simple alternative approach which can be applied to experimental and simulated data alike.

first-principles calculations↗
DOE OSTI2025

Significance of the structural configuration of B2 disorder in Co and Ti based Heusler alloys

We investigate here structural (at local and global levels) and transport properties for 𝑋 2 ⁢MnAl (𝑋= Co and Ti). Additionally, the magnetic properties were also studied for Ti 2 ⁢MnAl. Our x-ray diffraction results show that both the compounds stabilize in B2 disordered phase with cubic structure of 𝑃⁢𝑚⁢$\overline{3}$⁢𝑚 space group. Further, the structural configuration of the above disordered phase for both the compounds was identified using combined studies of x-ray absorption spectroscopy and multiple scattering calculations at the transition metal 𝐾 edges. Upon such identification, in the case of Co 2 ⁢Mn 1−𝑦⁢ Cr 𝑦 ⁢Al (𝑦= 0, 0.05, 0.1, 0.2) with change in 𝑦, we are able to establish a better connection quantitatively between the inverse of Mn-Co bonds and peak in the temperature-dependent resistivity. This highlights the crucial importance of a detailed understanding of the nature of B2 disorder. In the case of 𝑦=0, in the temperature range of study, the resistivity is driven by the functional form associated with (a) three-dimensional enhanced electron-electron Coulomb interaction scattering mechanism and (b) an unconventional one-magnon process. For Ti 2 ⁢MnAl, the transport shows metallic glasslike behavior at high temperature, while at low temperature it follows both the Cote-Meisel's model and quantum correction model. In this compound, the magnetic studies suggest the formation of superparamagnetic clusters in the paramagnetic matrix at low temperatures. Our density functional theory results are in line with the transport and magnetic properties. In literature, the spin polarization percentage (𝑃) for 𝑋= Co in B2 disordered phase is 76%. However, the present results emphasize the fact that in B2 disordered phase, the value of 𝑃 can range from 90% to 71% depending on the structural configuration introduced by swapping of the atomic positions of Mn and Al. For the compound under study, the value of percentage spin polarization obtained ranges between 82% to 85%. In addition, we also identify the origin of the difference in the shape of the Mn 3⁢𝑑 density of states for both the alloys. In conclusion, our results for 𝑋= Co alloy highlights the importance of identifying the specific structural configuration associated with a particular disorder category especially in the estimation of 𝑇 𝑐 and 𝑃 and for 𝑋= Ti, the physical properties can be tuned by varying the position of 𝐸 𝐹 and thereby its utilization in device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Investigating the Adsorption–Desorption Kinetics of a Molecular Water Oxidation Catalyst at an Electrode Interface

Probing the dynamics of molecular catalysts at electrode–electrolyte interfaces is essential for understanding catalytic mechanisms. Structure-specific spectroscopic methods are particularly powerful for examining electrocatalytic interfaces but are mostly used under steady-state conditions. Herein, we combined surface-enhanced infrared absorption spectroscopy (SEIRAS) with phase-sensitive detection (PSD) to investigate the dynamics of a molecular Ir-based water oxidation catalyst at the Au–electrolyte interface. We found that the amplitude of the absorbance of the catalyst is anticorrelated to that of interfacial water. This anticorrelation can be understood by the adsorption of the electrooxidized catalyst on the electrode and concurrent displacement of interfacial water. The infrared signals from the interface exhibit an increasing phase lag with respect to the electrode potential with an increasing scan rate of the potential. Kinetic modeling suggests that the potential-dependent adsorption–desorption kinetics of the molecular catalyst on the electrode gives rise to this phase lag. Furthermore, this study shows that PSD-SEIRAS is a powerful tool for investigating the interfacial dynamics of electrocatalytic systems.

Catalysts↗
DOE OSTI2022

Symmetry-specific orientational order parameters for complex structures

A comprehensive framework of characterizing complex self-assembled structures with a set of orientational order parameters is presented. It is especially relevant in the context of using anisotropic building blocks with various symmetries. Two classes of tensor order parameters are associated with polyhedral nematic and bond orientational order. For the latter, a variation of classical bond order parameters (BOPs) is introduced, which takes advantage of the symmetry of constituent particles and/or expected crystalline phases. These symmetrized BOPs can be averaged over an entire system or assigned locally to an individual bond. By combining that with the bond percolation procedure, one is able to identify coherent domains within a self-assembled structure. As a demonstration of the proposed framework, we apply it to a simulated hybrid system that combines isotropic and patchy particles with octahedral symmetry. In conclusion, not only does the methodology allow one to identify individual crystalline domains but also it detects coherent clusters of a peculiar compact amorphous structure that is not space-filling and lacks any long-range order.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Robust cycloid crossover driven by anisotropy in the skyrmion host GaV 4 S 8

We report on the anomalous magnetization dynamics of the cycloidally modulated spin textures under the influence of uniaxial anisotropy in multiferroic GaV 4 S 8 . The temperature and field dependence of the linear ac susceptibility [$χ'_{1ω}$ (T, H)], AC magnetic loss [$χ''_{1ω}$ (T, H)], and nonlinear AC magnetic response [$M_{3ω}$ (T, H)] are examined across the magnetic phase diagram in the frequency range f = 10 - 10 000 Hz. According to recent theory, skyrmion vortices under axial crystal symmetry are confined along specific orientations, resulting in enhanced robustness against oblique magnetic fields and altered spin dynamics. We characterize the magnetic response of each spin texture and find that the dynamic rigidity of the Néel skyrmion lattice appears enhanced compared to Bloch-type skyrmions in cubic systems, even in the multidomain state. Anomalous M 3 ω and strong dissipation emerge over the same phase regime where strong variations in the cycloid pitch were observed on lowering temperature in recent small-angle neutron-scattering experiments [White et al., Phys. Rev. B 97, 020401(R) (2018)]. Here, we show that strong anisotropy also drives an extended crossover of the zero-field cycloid texture in GaV 4 S 8 . The frequency dependence of these dynamic signatures is consistent with that of a robust anharmonic spin texture exhibiting a correlated domain arrangement. The results underpin the essential role of magnetic anisotropy in enhancing the rigidity of topological spin textures for diverse applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Phenomena Identification and Ranking Table (PIRT) for Heat Pipes

This Phenomena Identification and Ranking Table (PIRT) report provides an evaluation of key phenomena affecting the performance and operational regimes of heat pipes, particularly in the context of heat pipe microreactors (HPMRs). Heat pipes are advanced passive thermal management devices that utilize phase change and capillary action to achieve efficient heat transfer. However, due to the complexity of the phenomena coupled in the heat pipe, including phase change, turbulent transition, and compressibility effects, among others, there is high uncertainty in identifying and ranking the important phenomena affecting the operation of heat pipes and the current knowledge for their modeling and simulation and experimental measurements and instrumentation. This PIRT exercise, conducted as a collaborative effort involving the Department of Energy (DOE) Microreactor Program (MRP), the Nuclear Regulatory Commission (NRC), and university partners systematically identifies, reviews, and prioritizes critical phenomena affecting the operation of heat pipes based on their importance and knowledge levels. The report analyzes phenomena with high importance and low knowledge, such as wick de-wetting, critical heat flux, contact angles, and pressure dynamics, discussing challenges and future research directions for improving their modeling and simulation and experimental measurements. Additionally, the report addresses phenomena with low knowledge that could impact heat pipe operation during non-normal or transient operation, including frozen startup, laminar to turbulent transition, geysering, wick priming, underfilling conditions, surface roughness of the wick, NCGs trapped in the wick, and the timescales of startup and shutdown. This comprehensive evaluation serves as a valuable resource for guiding future research and development efforts, supporting the successful integration of heat pipes into critical applications such as nuclear reactors, and contributing to the advancement of heat pipe technologies in safety-critical industries.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗
DOE OSTI2022

Superconductivity in multiorbital systems with repulsive interactions: Hund's pairing versus spin-fluctuation pairing

Hund's pairing refers to Cooper pairing generated by onsite interactions that become attractive due to large Hund's exchange J. This is possible in multiorbital systems even when all local bare interactions are repulsive, since attractions in specific channels are given by certain linear combinations of interaction parameters. On the other hand, pairing processes such as the exchange of spin fluctuations are also present. We compare mean-field Hund's pairing and spin-fluctuation-mediated pairing using electronic bands appropriate for different classes of multiorbital systems over a wide range of interaction parameters. We find that, for systems without clear nesting features, the superconducting state generated by the Hund's mechanism agrees well with that from the full fluctuation exchange vertex when Hund's exchange and spin-orbit coupling are sufficiently large. On the other hand, for systems characterized by a peaked finite-momentum particle-hole susceptibility, spin-fluctuation pairing generally dominates over Hund's pairing. From this perspective Hund's pairing states appear unlikely to be realized in systems like Sr 2 RuO 4 and generic iron-based superconductors.

36 MATERIALS SCIENCE↗