Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “source location”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Newly Identified Climatically and Environmentally Significant High-Latitude Dust Sources

Dust particles from high latitudes have a potentially large local, regional, and global significance to climate and the environment as short-lived climate forcers, air pollutants, and nutrient sources. Identifying the locations of local dust sources and their emission, transport, and deposition processes is important for understanding the multiple impacts of high-latitude dust (HLD) on the Earth’s systems. Here, we identify, describe, and quantify the source intensity (SI) values, which show the potential of soil surfaces for dust emission scaled to values 0 to 1 concerning globally best productive sources, using the Global Sand and Dust Storms Source Base Map (G-SDS-SBM). This includes 64 HLD sources in our collection for the northern (Alaska, Canada, Denmark, Greenland, Iceland, Svalbard, Sweden, and Russia) and southern (Antarctica and Patagonia) high latitudes. Activity from most of these HLD sources shows seasonal character. It is estimated that high-latitude land areas with higher (SI ≥ 0.5), very high (SI ≥ 0.7), and the highest potential (SI ≥ 0.9) for dust emission cover > 1 670 000 km 2 , > 560 000 km 2 , and > 240 000 km 2 , respectively. In the Arctic HLD region (≥ 60◦ N), land area with SI ≥ 0.5 is 5.5 % (1 035 059 km 2 ), area with SI ≥ 0.7 is 2.3 % (440 804 km 2 ), and area with SI ≥ 0.9 is 1.1 % (208 701 km 2 ). Minimum SI values in the northern HLD region are about 3 orders of magnitude smaller, indicating that the dust sources of this region greatly depend on weather conditions. Our spatial dust source distribution analysis modeling results showed evidence supporting a northern HLD belt, defined as the area north of 50◦ N, with a “transitional HLD-source area” extending at latitudes 50–58◦ N in Eurasia and 50–55◦ N in Canada and a “cold HLD-source area” including areas north of 60◦ N in Eurasia and north of 58◦ N in Canada, with currently “no dust source” area between the HLD and low-latitude dust (LLD) dust belt, except for British Columbia. Using the global atmospheric transport model SILAM, we estimated that 1.0 % of the global dust emission originated from the high-latitude regions. About 57 % of the dust deposition in snow- and ice-covered Arctic regions was from HLD sources. In the southern HLD region, soil surface conditions are favorable for dust emission during the whole year. Climate change can cause a decrease in the duration of snow cover, retreat of glaciers, and an increase in drought, heatwave intensity, and frequency, leading to the increasing frequency of topsoil conditions favorable for dust emission, which increases the probability of dust storms. Our study provides a step forward to improve the representation of HLD in models and to monitor, quantify, and assess the environmental and climate significance of HLD.

high latitude dust↗
NASA NTRS1972

The Uhuru catalog of X-ray sources.

A catalog of X-ray sources observed with the Uhuru satellite is presented. About 70 days of data have been analyzed for this catalog resulting in 125 sources. Approximately two-thirds of the sources are located within plus or minus 20 deg of the galactic plane. Some of the sources at higher galactic latitudes are identified with known extragalactic objects. Most of the strong sources near the galactic plane are found to be variable.

Giacconi, R.↗
NASA NTRS1972

Correlation of stress-wave-emission characteristics with fracture aluminum alloys

A study to correlate stress wave emission characteristics with fracture in welded and unwelded aluminum alloys tested at room and cryogenic temperature is reported. The stress wave emission characteristics investigated were those which serve to presage crack instability; viz., a marked increase in:(1) signal amplitude; (2) signal repetition rate; and (3) the slope of cumulative count plotted versus load. The alloys were 7075-T73, 2219-T87 and 2014-T651, welded with MIG and TIG using 2319 and 4043 filler wire. The testing was done with both unnotched and part-through-crack (PTC) tension specimens and with 18-in.-dia subscale pressure vessels. In the latter testing, a real time, acoustic emission, triangulation system was used to locate the source of each stress wave emission. With such a system, multiple emissions from a given location were correlated with defects found by conventional nondestructive inspection.

Hartbower, C. E.↗
NASA NTRS1977

Uhuru observations of the globular cluster X-ray source NGC 6712

Two years of Uhuru observations of the globular-cluster X-ray source A1850-08 = NGC 6712 are reported. An X-ray flare with a duration longer than that of reported X-ray bursts but shorter than that of X-ray transients is analyzed during which the source reached an intensity approximately one-third that of the Crab Nebula. It is found that the source shows day-to-day variability similar to that observed for the other six globular-cluster sources and for the great majority of galactic X-ray sources. A location is determined with 90% confidence by combining the Uhuru location with the Ariel 5 error box, and the identification of the X-ray source with the globular cluster is confirmed. Several possible models for the flaring behavior of the source are evaluated.

Cominsky, L.↗
NASA NTRS2006

Measurement of Model Noise in a Hard-Wall Wind Tunnel

Identification, analysis, and control of fluid-mechanically-generated sound from models of aircraft and automobiles in special low-noise, semi-anechoic wind tunnels are an important research endeavor. Such studies can also be done in aerodynamic wind tunnels that have hard walls if phased microphone arrays are used to focus on the noise-source regions and reject unwanted reflections or background noise. Although it may be difficult to simulate the total flyover or drive-by noise in a closed wind tunnel, individual noise sources can be isolated and analyzed. An acoustic and aerodynamic study was made of a 7-percent-scale aircraft model in a NASA Ames 7-by-10-ft (about 2-by-3-m) wind tunnel for the purpose of identifying and attenuating airframe noise sources. Simulated landing, takeoff, and approach configurations were evaluated at Mach 0.26. Using a phased microphone array mounted in the ceiling over the inverted model, various noise sources in the high-lift system, landing gear, fins, and miscellaneous other components were located and compared for sound level and frequency at one flyover location. Numerous noise-alleviation devices and modifications of the model were evaluated. Simultaneously with acoustic measurements, aerodynamic forces were recorded to document aircraft conditions and any performance changes caused by geometric modifications. Most modern microphone-array systems function in the frequency domain in the sense that spectra of the microphone outputs are computed, then operations are performed on the matrices of microphone-signal cross-spectra. The entire acoustic field at one station in such a system is acquired quickly and interrogated during postprocessing. Beam-forming algorithms are employed to scan a plane near the model surface and locate noise sources while rejecting most background noise and spurious reflections. In the case of the system used in this study, previous studies in the wind tunnel have identified noise sources up to 19 dB below the normal background noise of the wind tunnel. Theoretical predictions of array performance are used to minimize the width and the side lobes of the beam pattern of the microphone array for a given test arrangement. To capture flyover noise of the inverted model, a 104-element microphone array in a 622-mm-diameter cluster was installed in a 19-mm-thick poly(methyl methacrylate) plate in the ceiling of the test section of the wind tunnel above the aircraft model (see Figure 1). The microphones were of the condenser type, and their diaphragms were mounted flush in the array plate, which was recessed 12.7 mm into the ceiling and covered by a porous aromatic polyamide cloth (not shown in the figure) to minimize boundary-layer noise. This design caused the level of flow noise to be much less than that of flush-mount designs. The drawback of this design was that the cloth attenuated sound somewhat and created acoustic resonances that could grow to several dB at a frequency of 10 kHz.

Soderman, Paul T.↗
NASA NTRS1985

Simultaneous observations of hard X-ray and microwave burst sources in a limb flare

Observations of a flare which occurred just behind the west solar limb on 1981 August 3 are reported. A hard X-ray source (20-30 keV) and a microwave source at 5 GHz were observed simultaneously using the Very Large Array and the hard X-ray telescope aboard the Hinotori spacecraft. Both sources were located in the corona, apparently near the tops of two independent coronal arcades or loops. The source may be composed of many thin filaments unresolved by the VLA observations.

Takakura, T.↗
NASA NTRS1986

A new method for reconstructing type III trajectories

A local density approximation (LDA) method is developed for reconstructing the trajectories of type III radio bursts through the interplanetary medium. The method uses the measured source directions and the measured frequency drift rates of the type III burst to determine the locations of the radio source in the interplanetary medium at consecutive frequency levels. The technique is used to reconstruct the trajectory of an actual type III burst and the results are compared to the trajectory obtained from the global density law method. The LDA method represents an improvement in that it utilizes more observed data on the type III burst and that it takes full account of the local density variations at the source locations.

Reiner, M. J.↗
NASA NTRS2015

NASA's Meteoroid Environments Office's Response to Three Significant Bolide Events Over North America

Being the only U.S. Government entity charged with monitoring the meteor environment, the Meteoroid Environment Office has deployed a network of all sky and wide field meteor cameras, along with the appropriate software tools to quickly analyze data from these systems. However, the coverage of this network is still quite limited, forcing the incorporation of data from other cameras posted to the internet in analyzing many of the fireballs reported by the public and media. A procedure has been developed that determines the analysis process for a given fireball event based on the types and amount of data available. The differences between these analysis process will be explained and outlined by looking at three bolide events, all of which were large enough to produce meteorites. The first example is an ideal event - a bright meteor that occurred over NASA's All Sky Camera Network on August 2, 2014. With clear video of the event from various angles, a high-accuracy trajectory, beginning and end heights, orbit and approximate brightness/size of the event are able to be found very quickly using custom software. The bolide had the potential to have dropped meteorites, so dark flight analysis and modeling was performed, allowing potential fall locations to be mapped as a function of meteorite mass. The second case study was a bright bolide that occurred November 3, 2014 over West Virginia. This was just north of the NASA southeastern all-sky network, and just south of the Ohio-Pennsylvania network. This case study showcases the MEO's ability to use social media and various internet sources to locate videos of the event from obscure sources (including the Washington Monument) for anything that will permit a determination of a basic trajectory and fireball light curve The third case study will highlight the ability to use doppler weather radar in helping locate meteorites, which enable a definitive classification of the impactor. The input data and analysis steps differ for each case study, but the goals remain the same - a trajectory, orbit, and mass estimate for the bolide within hours of the event, and, for events with a high probability of producing meteorites, a location of the strewn field within a day.

Blaauw, Rhiannon C.↗
DOE OSTI2020

In-Device Delay: Introduction to Obscurant Physcial Protection System

The Office of Radiological Security (ORS) In-Device Delay (IDD) program has undertaken a project to research and develop a novel protection system for industrial irradiators that contain high-activity Co-60 sources. Based on adversary testing conducted by ORS, it is was determined that to successfully accomplish the theft of the target material, the adversary will require visual contact of the sources and source rack located at the bottom of the pool. Therefore, if a means of obscuring or visually hiding the sources in the pool can be achieved (while adhering to facility operations, safety, and regulatory requirements), then illicit source theft will be significantly hindered. This project aims to develop a low-cost, non-propriety obscurant that, when an adversary action is detected, the obscurant will be deployed into the pool quickly, rendering visual observation of the source problematic; however, this obscurant will not otherwise disturb the sources, source rack, and filtration system. The obscurant will remain in the pool until removed by another process.

61 RADIATION PROTECTION AND DOSIMETRY↗
NASA NTRS1974

Preliminary analysis of an extensive one year survey of trace elements and compounds in the suspended particulate matter in Cleveland, Ohio

Preliminary review of a study of trace elements and compound concentrations in the ambient suspended particulate matter in Cleveland, Ohio, measured from August 1971 through June 1973, as a function of source, monitoring location, and meteorological conditions. The study is aimed at the development of techniques for identifying specific pollution sources which could be integrated into a practical system readily usable by an enforcement agency.

King, R. B.↗
NASA NTRS1995

Radio Wave Scattering in the Outer Heliosphere: Preliminary Calculations

Detailed first estimates are presented of angular broadening in the outer heliosphere due to scattering of radio waves by density irregularities. The application is to the 2-3 kHz radiation observed by Voyager. Two plausible turbulence models, which account very well for scattering within 1 AU, are extrapolated beyond 10 AU. Both models predict significant angular broadening in the outer heliosphere, accounting semi- quantitatively alone for the source sizes inferred from roll modulation data. Predictions are presented for radial variations in the apparent source size if scattering is important. Comparisons with available data argue that scattering is important (and indeed is the dominant contributor to the apparent source size) and that the radiation source is located in the outer heliosphere. Other evidence that scattering is important, such as the fluctuations in apparent source direction and intensity, are also identified. The effects of scattering should be included in future analyses of the 2-3 kHz emissions.

Cairns, Iver H.↗
DOE OSTI2021

Analysis and Optimization of Seismo-Acoustic Monitoring Networks with Bayesian Optimal Experimental Design

The Bayesian optimal experimental design (OED) problem seeks to identify data, sensor configurations, or experiments which can optimally reduce uncertainty. The goal of OED is to find an experiment that maximizes the expected information gain (EIG) about quantities of interest given prior knowledge about expected data. Therefore, within the context of seismic monitoring, we can use Bayesian OED to configure sensor networks by choosing sensor locations, types, and fidelity in order to improve our ability to identify and locate seismic sources. In this work, we develop the framework necessary to use Bayesian OED to optimize the ability to locate seismic events from arrival time data of detected seismic phases. In order to do utilize Bayesian OED we must develop four elements:1. A likelihood function that describes the uncertainty of detection and travel times; 2. A Bayesian solver that takes a prior and likelihood to identify the posterior; 3. An algorithm to compute EIG; and, 4. An optimizer that finds a sensor network which maximizes EIG. Once we have developed this framework, we can explore many relevant questions to monitoring such as: how and what multiphenomenology data can be used to optimally reduce uncertainty, how to trade off sensor fidelity and earth model uncertainty, and how sensor types, number, and locations influence uncertainty

47 OTHER INSTRUMENTATION↗
NASA NTRS1985

Simultaneous microwave observations of solar flares at 6 and 20 cm wavelengths using the VLA

Using the Very Large Array, solar burst observations have been carried out simultaneously at 6 and 20 cm. Structural changes and preheating have been observed in the flaring regions on time scales of minutes to tens of minutes before the onset of the burst impulsive phase. The 6 cm burst sources are located close to the neutral line, or near the legs of a flaring loop. The 20 cm burst sources show complex and extended structures spatially separated from both the preburst emission and the gradual decay phase of the burst. The observations are interpreted in terms of a two-component flare model (bulk heating as well as acceleration of particles), and the physical parameters of the burst sources are derived.

Melozzi, M.↗
NASA NTRS1985

G27.4+0.0 - A galactic supernova remnant with a central compact source

High-resolution X-ray and radio images of the galactic supernova remnant G27.4+0.0 are presented. The X-ray image reveals a centrally located compact source of emission which accounts for 25 percent + or - 2 percent of the emission. The rest of the emission is found in diffuse patches defining a circle of diameter 4 arc min. The radio image is an incomplete shell of comparable diameter with no apparent counterpart to the compact X-ray source. The X-ray luminosity of the supernova remmant implied by the distance of 26 kpc inferred from the Sigma-D relationship exceeds that of any known remnant. This fact, plus the relatively low X-ray absorption, suggests that the remnant is substantially closer than 26 kpc. No X-ray variability of the central source has been detected to a level of 50 percent on time scales of about 1 year, and no periodicity in the range 0.0001-100 Hz to a limit of 16 percent was detected. If G27.4 +0.0 is within a few kiloparsecs, the central source is most likely to be an accretion-powered X-ray binary.

Kriss, G. A.↗
DOE OSTI2025

Analysis and optimization of seismic monitoring networks with Bayesian optimal experimental design

SUMMARY Monitoring networks increasingly aim to assimilate data from a large number of diverse sensors covering many sensing modalities. Bayesian optimal experimental design (OED) seeks to identify data, sensor configurations or experiments which can optimally reduce uncertainty and hence increase the performance of a monitoring network. Information theory guides OED by formulating the choice of experiment or sensor placement as an optimization problem that maximizes the expected information gain (EIG) about quantities of interest given prior knowledge and models of expected observation data. Therefore, within the context of seismo-acoustic monitoring, we can use Bayesian OED to configure sensor networks by choosing sensor locations, types and fidelity in order to improve our ability to identify and locate seismic sources. In this work, we develop the framework necessary to use Bayesian OED to optimize a sensor network’s ability to locate seismic events from arrival time data of detected seismic phases at the regional-scale. This framework requires five elements: (i) A likelihood function that describes the distribution of detection and traveltime data from the sensor network, (ii) A prior distribution that describes a priori belief about seismic events, (iii) A Bayesian solver that uses a prior and likelihood to identify the posterior distribution of seismic events given the data, (iv) An algorithm to compute EIG about seismic events over a data set of hypothetical prior events, (v) An optimizer that finds a sensor network which maximizes EIG. Once we have developed this framework, we explore many relevant questions to monitoring such as: how to trade off sensor fidelity and earth model uncertainty; how sensor types, number and locations influence uncertainty; and how prior models and constraints influence sensor placement.

58 GEOSCIENCES↗
NASA NTRS1992

'Intermittent' solar periodicities

The signal from a stable periodicity can seem to be intermittent when it is partially masked by an unmodelled window function or when the data set is too short to resolve closely spaced periodicities. By taking this into account, short-lived periodicities in solar data can be reinterpreted as evidence for continuously periodic behavior. The periodic sources are located in the solar interior and caused by global oscillation modes. The convective envelope acts as the window for these sources. Recent reports of seven periodicities from 100 to 1000 days are compared with this model. Precise long-term values for the periodicities are predicted and they agree closely with observations. Some elements are suggested that might explain the well-documented 155-day periodicity. Conventional filtering methods to suppress effects of the 11-year cycle are criticized as inadequate.

Wolff, Charles L.↗
NASA NTRS1977

HFT events - Shallow moonquakes

A few large distant seismic events of distinctly high signal frequency, designated HFT (high-frequency teleseismic) events, are observed yearly by the Apollo lunar seismic network. Their sources are located on or near the surface of the moon, leaving a large gap in seismic activity between the zones of HFT sources and deep moonquakes. No strong regularities are found in either their spatial or temporal distributions. Several working hypotheses for the identity of these sources have advanced, but many characteristics of the events seem to favor a hypothesis that they are shallow moonquakes. Simultaneous observations of other lunar phenomena may eventually enable the determination of their true identity.

Nakamura, Y.↗