Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solar optics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

The Solar System Beyond Neptune

This proposal supported deep and wide-field optical imaging of the trans-Neptunian Solar System capitalizing on our broad access to state-of-the-art facilities on Mauna Kea. Key quantities determined include the size distribution of Kuiper Belt objects (a differential power law with an index -4), and the inclination and radial distance distributions. We identified an outer edge to the classical Kuiper Belt that has since been confirmed by independent workers. We also obtained an assessment of the population densities in the mean-motion resonances with Neptune and discovered the Scattered Kuiper Belt Object dynamical class. Scientific issues on which these measurements have direct bearing include the collisional environment of the Kuiper Belt, the origin of the short-period comets, and the origin by capture into resonance of Pluto and other Kuiper Belt objects.

Jewitt, David↗
DOE OSTI2020

SCOPE: Spectral cloud optical property estimation using real-time GOES-R longwave imagery

The output of ground-based, solar power generation systems is strongly dependent on cloud cover, which is the main contributor to solar power variability and uncertainty. Cloud optical properties are typically over-simplified in forecasting applications due to the lack of realtime, accurate estimates. In this work, we introduce a method, the Spectral Cloud Optical Property Estimation (SCOPE), for estimating cloud optical properties directly from high-resolution (5-min, 2 km) imagery from Geostationary Operational Environmental Satellite (GOES)-R, which is the newest generation of the GOES system. The SCOPE method couples a two-stream, spectrally resolved radiative model with the longwave GOES-R sensor output to simultaneously estimate the cloud optical depth, cloud top height, and cloud thickness during both day and night at 5-min intervals. The accuracy of SCOPE is evaluated using one year (2018) of downwelling longwave (DLW) radiation measurements from the Surface Radiation Budget Network, which consists of seven sites spread across climatically diverse regions of the contiguous United States. During daytime clear-sky periods, SCOPE predicts DLW within instrument uncertainty (10 W m -2 ) for four of the seven locations, with the remaining locations yielding errors of the order of 11.2, 17.7, and 20.2 W m -2 . For daytime cloudy-sky, daytime all-sky (clear or cloudy), and nighttime all-sky periods, SCOPE achieves root mean square error values of 23.0–34.5 W m -2 for all seven locations. These results, together with the low-latency of the method (1 s per sample), show that SCOPE provides a viable solution to real-time, accurate estimation of cloud optical properties for both day and night.

42 ENGINEERING↗
NASA NTRS1992

Ginga observations of X-ray flares on Algol

The Ginga X-ray satellite observed Algol (Beta Per) for 2 days in 1989 January, including both the primary optical eclipse and most of the secondary eclipse. We derive upper limits of about 20 and 10 percent, respectively, for the eclipsed flux fraction during the two eclipses. A large flare lasting over 12 hr was seen prior to and during secondary eclipse. High-temperature Fe line emission is clearly detected in the proportional counter data. The Fe line equivalent width is variable during the flare, ranging from 0.4-1.0 keV. Except for two intervals during the flare rise, the observed equivalent width is lower than predicted using solar abundances and an optically thin plasma model. Similar behavior has also been observed by Ginga in a large flare on UX Ari: in both events, opacity effects at line center may be playing a significant role. Loop model analysis of the large flare suggests that it involves a substantially longer loop or loops than a shorter duration Algol flare seen with Exosat.

Stern, R. A.↗
NASA NTRSDate not supplied

Surface Radiation Budget (SRB) Release 2 Shortwave Daily Data in Native Format (SRB_REL2_SW_DAILY)

This data set contains upward and downward fluxes, photosynthetically active radiative flux, aerosol and cloud optical depth, cloud fraction, and solar zenith angle measured at three hourly intervals for each day for the entire globe between 07/01/1983 and 10/31/1995. These SW surface radiative parameters were derived with the Shortwave algorithm of the NASA World Climate Research Programme/Global Energy and Water-Cycle Experiment (WCRP/GEWEX) Surface Radiation Budget (SRB) Project. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1983-07-01; Stop_Date=1998-07-26] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=1 degree; Longitude_Resolution=Ranges from 1 degree (tropics and subtropics) to 120 degrees (the poles).; Temporal_Resolution=daily; Temporal_Resolution_Range=daily].

ALL SKY SW SURFACE UPWARD FLUX↗
DOE OSTI2022

On the Interplay between CT and Singlet Exciton Emission in Organic Solar Cells with Small Driving Force and Its Impact on Voltage Loss

The interplay between free charge carriers, charge transfer (CT) states and singlet excitons (S 1 ) determines the recombination pathway and the resulting open circuit voltage (V OC ) of organic solar cells. By combining a well-aggregated low bandgap polymer with different blend ratios of the fullerenes PCBM and ICBA, the energy of the CT state (E CT ) is varied by 130 meV while leaving the S 1 energy of the polymer (E S 1 ) unaffected. It is found that the polymer exciton dominates the radiative properties of the blend when approaches E CT , while the V OC remains limited by the non-radiative decay of the CT state. It is concluded that an increasing strength of the exciton in the optical spectra of organic solar cells will generally decrease the non-radiative voltage loss because it lowers the radiative V OC limit (V OC,rad ), but not because it is more emissive. The analysis further suggests that electronic coupling between the CT state and the S 1 will not improve the V OC , but rather reduce the V OC,rad . It is anticipated that only at very low CT state absorption combined with a fairly high CT radiative efficiency the solar cell benefit from the radiative properties of the singlet excitons.

14 SOLAR ENERGY↗
NASA NTRSDate not supplied

Validation of Rendered Natural and Artificial Lighting Environments in Real Time Lunar South Pole Simulations

NASA’s Artemis campaign is making heavy use of simulation to help return humans to the lunar surface by the end of the decade. There are several aspects of the lunar surface and its environment which must be accurately modeled before these simulations can be relied upon to influence decisions being made under these programs. Digital Lunar Exploration Sites, a paper submitted to the 2022 IEEE Aerospace Conference, outlined the process used to generate the lunar surface in a digital environment. This paper will expand upon this topic and delve into the steps being taken by the NASA Exploration Systems Simulations (NExSyS) team at NASA’s Johnson Space Center (JSC) to properly verify and validate these simulations, with a focus on the visual aspects of the environment. Natural lighting validation relies in part on the wealth of data generated during the Apollo program. Many images taken by Apollo astronauts on the lunar surface have been replicated in the simulated environments to gain confidence in the accuracy of terrain and lighting models. However, because the environment the Artemis astronauts will experience at the Lunar South Pole (LSP) is dissimilar from the near-equatorial Apollo sites, other validation techniques must be applied. At the LSP, the sun crests only about three degrees above the horizon and when combined with the lack of a lunar atmosphere, lighting in this region is often very different than what a human would experience on Earth. Solar illumination, earthshine, human eye response, solar blooming, lunar regolith optical properties, and shadows cast by rocks and crater walls will play a significant role in an astronaut’s ability to safely conduct an Extra-Vehicular Activity (EVA) or perform a traverse with a lunar rover. Approaches for validation of these aspects of the rendered LSP environment are considered in this paper. In addition to natural lighting, approaches for the validation of artificial lighting models at the LSP are discussed. The JSC Lighting Lab has been studying the illumination profile of the Exploration Infomatics Subsystem (xINFO) lighting on the Exploration EVA Mobility Unit (xEMU). How these lights interact with the solar illumination and the shadows being cast on the lunar surface is of particular interest, so the validity of models representing these lights in a human-in-the-loop virtual reality environment becomes very important. This paper also touches on some of the simulation performance considerations when a Human in the Loop (HITL) is present, which drives the need for real time rendering of the environment. Natural and artificial lighting will play a crucial role to decisions being made when planning and executing missions at the Lunar South Pole (LSP) and it is vitally important to understand the LSP environment before we return.

Lunar↗
NASA NTRS2023

Approaches for Validation of Lighting Environments in Realtime Lunar South Pole Simulations

NASA’s Artemis campaign is making heavy use of simulation to help return humans to the lunar surface by the end of the decade. There are several aspects of the lunar surface and its environment which must be accurately modeled before these simulations can be relied upon to influence decisions being made under these programs. Digital Lunar Exploration Sites, a paper submitted to the 2022 IEEE Aerospace Conference, outlined the process used to generate the lunar surface in a digital environment. This paper will expand upon this topic and delve into the steps being taken by the NASA Exploration Systems Simulations (NExSyS) team at NASA’s Johnson Space Center (JSC) to properly verify and validate these simulations, with a focus on the visual aspects of the environment. Natural lighting validation relies in part on the wealth of data generated during the Apollo program. Many images taken by Apollo astronauts on the lunar surface have been replicated in the simulated environments to gain confidence in the accuracy of terrain and lighting models. However, because the environment the Artemis astronauts will experience at the Lunar South Pole (LSP) is dissimilar from the near-equatorial Apollo sites, other validation techniques must be applied. At the LSP, the sun crests only about 1.5 degrees above the horizon and when combined with the lack of a lunar atmosphere, lighting in this region is often very different than what a human would experience on Earth. Solar illumination, earthshine, human eye response, solar blooming, lunar regolith optical properties, and shadows cast by rocks and crater walls will play a significant role in an astronaut’s ability to safely conduct an Extra-Vehicular Activity (EVA) or perform a traverse with a lunar rover. Approaches for validation of these aspects of the rendered LSP environment are considered in this paper. In addition to natural lighting, approaches for the validation of artificial lighting models at the LSP are discussed. The JSC Lighting Lab has been studying the illumination profile of the Exploration Informatics Subsystem (xINFO) lighting on the Exploration EVA Mobility Unit (xEMU). How these lights interact with the solar illumination and the shadows being cast on the lunar surface is of particular interest, so the validity of models representing these lights in a human-in-the-loop virtual reality environment becomes very important. This paper also touches on some of the simulation performance considerations when a Human in the Loop (HITL) is present, which drives the need for realtime rendering of the environment. Natural and artificial lighting will play a crucial role to decisions being made when planning and executing missions at the Lunar South Pole (LSP) and it is vitally important to understand the LSP environment before we return.

Lunar↗
NASA NTRSDate not supplied

Solar Absorptivity Degradation of Spacecraft Materials Due to UV and Charged Particles in the Gateway Environment

Gateway will be an outpost in cislunar space designed to survive a 15-year mission to support human Moon landings and future deep space exploration. The Gateway Passive Thermal Control System (PTCS) Group has identified charged particle and UV degradation of potential Gateway materials as a knowledge gap for the Near Rectilinear Halo Orbit (NRHO) and transit environment, especially the slow spiral transit planned for the first two modules. Solar absorptivity degradation is important to quantify because the end-of-life absorptivity impacts thermal performance of the system. To address this, ground testing has been completed at NASA Goddard Space Flight Center in which potential Gateway materials, including radiators, multi-layer insulation (MLI), and structural materials are subjected to the expected transit plus 15-year on-orbit charged particle fluence (9.86x1015 protons/cm2 at 2.5 keV and 3.1x1016 electrons/cm2 at 10 keV) and 5093 Equivalent Solar Hours (ESH). Reflectivity of a single sample of each material was measured in atmosphere and in vacuum inside the chamber after exposure to incremental levels of ESH and charged particle fluence. Increase in absorptivity of most samples were seen throughout the test including large differences in absorptivity of materials of the same category. Future planned testing will validate these results and include additional materials of interest.

Optical Property↗
NASA NTRS1978

Transformation of surface albedo to surface: Atmosphere surface and irradiance, and their spectral and temporal averages

The dependence of the albedo at the top of a realistic atmosphere upon the surface albedo, solar zenith angle, and cloud optical thickness is examined for the cases of clear sky, total cloud cover, and fractional cloud cover. The radiative transfer calculations of Dave and Braslau (1975) for particular values of surface albedo and solar zenith angle, and a single value of cloud optical thickness are used as the basis of a parametric albedo model. The question of spectral and temporal averages of albedos and reflected irradiances is addressed, and unique weighting functions for the spectral and temporal albedo averages are developed.

Nack, M. L.↗
NASA NTRS1983

Gamma-ray observational constraints on the origin of the optical continuum emission from the white-light flare of 1980 July 1

Results are presented for the flare of July 1, 1980, which started at approximately 1627 UT and in which simultaneous measurements were made of X-ray, gamma-ray, and optical continuum emission for the entire duration of the flare. The X-ray and gamma-ray observations were made by the Gamma-Ray Spectrometer on the Solar Maximum Mission satellite. The optical measurements were taken at the Sacramento Peak Observatory and the Big Bear Solar Observatory (Zirin and Neidig, 1981). It is found that the major white-light emission that occurs in the late phase of the flare could not have been due to heating by electron or ion precipitation. This conclusion derives from the fact that the X-ray and gamma-ray flux peaks approximately 1 minute before the maximum of the optical continuum mission emission. It is also found that approximately 73 percent of the optical continuum emission, representing a spatially and temporally distinct bright point, follows this maximum with little or no X-ray or gamma-ray emission in the same period.

Ryan, J. M.↗
NASA NTRS1995

Astro-1 and ground-based observations of Markarian 335: Evidence for an accretion disk

Simultaneous UV and optical observations of the Seyfert galaxy Markarian 335 (z = 0.026) during the Astro-1 mission yield a spectrum spanning the wavelength range of 912-8410 A. In the sub-Ly alpha region a prominent blended emission feature of O VI lambda lambda 1032, 1038, and Ly beta is nearly as strong as C IV wavelength 1549. The continuum flux extends beyond the redshifted Luman limit without a noticeable discontinuity, but a siginificant change in slope exists near the redhsifted Lyman edge. We suggest that such a change may be the signature of a Lyman edge in an accretion disk seen at a small inclination angle. Using a disk model including such an edge, we fit the spectrum with a central black hole mass of 5 x 10(exp 7) solar mass, an accretion rate of 0.07 solar mass/yr, and an optical depth at the Lyman edge of 0.4. To account for the strong O VI emission as well as the soft X-ray excess, we consider the effects of Comptonization on the disk spectrum, which can produce a high-energy tail for the UV bump and also smooth the Lyman edge feature.

Zheng, W.↗
NASA NTRS1992

Latitudinal survey of spectral optical depths of the Pinatubo volcanic cloud - Derived particle sizes, columnar mass loadings, and effects on planetary albedo

Airborne measurements are examined of spectral optical depths, radiative fluxes, and scattered radiation fields during the NASA Caribbean mission (July 7-14, 1991) to characterize the Pinatubo volcanic cloud. The latitudinal and spectral dependence are reported of the volcanic cloud's optical depth. From these measurements moments of the particle-size distribution are determined. The change in planetary albedo induced by the volcanic cloud is calculated for the range of measured optical depths with the objective of assessing the impact on the solar radiation budget. Mid-visible optical depths higher than 0.4 were observed, placing the Pinatubo stratospheric cloud among the thickest ever measured. The latitudinal distribution of extinction shows that by July 7, 1991 the volcanic cloud had extended to 30 deg N. The effective particle radius was determined to be between 0.18 and 0.35 micron with a corresponding columnar mass loading between 35 and 80 mag/sq m.

Valero, Francisco P. J.↗
DOE OSTI2020

Enhancement of Optical Efficiency of CSP Mirrors for Reducing O&M Cost via Near-Continuous Operation of Self-Cleaning Electrodynamic Screens (EDS). Final Report

Over the past decade, techno-economical advancements in solar energy systems, particularly the improvement in the conversion efficiency of PV modules made with mono-crystalline silicon solar cells from 12% to 20%, as well as the cost reduction in manufacturing by a factor of about 10%, have made it possible to achieve a levelized cost of electricity (LCOE) in PV plants that is comparable to, or less than, the cost of deriving electricity from fossil fuels. Operating PV plants in mid-latitude sun-belt regions, where the solar irradiance level is highest, provides a high annual energy-yield (kWh/kWp) due to two factors: (1) the availability of predictable high solar irradiance throughout the year with the fewest interruptions in solar flux from clouds and rain, and (2) the increased conversion efficiency of crystalline solar cells, as recombination loss has decreased with increased intensity of the sunlight that illuminates the silicon solar cells. Semi-arid and desert regions, however, are plagued by high atmospheric dust concentrations and frequent sand storms. The deposition of a layer of dust on the optical surfaces of solar collectors such as PV modules and concentrating mirrors reduces the transmission efficiency of sunlight that actually reaches the solar cells or receivers, resulting in high energy-yield soiling loss. There are two major cost components to operating a solar plant: (1) installation costs, and (2) operation-and-maintenance (O&M) costs. There is no fuel cost; hence operating a solar plant in a semi-arid or desert region provides high returns on investment if soiling losses are mitigated via efficient cleaning methods and optimized cleaning frequency. If solar collectors are not cleaned, the accumulation of dust layers on solar collectors may cause the operation of such plants in arid regions to become economically unviable. Washing solar collectors with water and detergent, as is most commonly done now, is an efficient method for cleaning. The conventional approach in utility-scale solar plants is to use a large truck with a water tank and pump system for spraying deionized water on the surface of the solar collectors. Robotic cleaning with brushes, used for many solar plants, requires lesser water for cleaning. The water consumed using semi-automated cleaning of PV modules in utility-scale solar plants is approximately 2 liters/m 2 per cleaning cycle. The total optical surface area of the solar collectors in 1 TW-scale solar installation will be more than 3 × 109 m 2 ; hence an enormous amount of water be needed for cleaning. There simply is not enough fresh water in the sun-belt areas of the world for predicted cleaning needs. In solar power plants, the estimated cost of cleaning solar collectors includes expenses related to the equipment used, labor, cost of transportation of water, the energy required for cleaning, plus ancillary costs whereas the cost of water is not considered. The water used is obtained from sources located close to plant sites, unmindful of the environmental and societal impact as the power plants are oftentimes located in regions that face severe drought. This practice is very similar to the cost calculations in deriving the levelized cost of electricity (LCOE) in conventional power plants based on burning fossil fuel such as coal and gas, while disregarding the cost of climate change and health effects. Unless a water-free or low-water cleaning method is established, the expansion of solar plants may lose public support in areas suffering long intervals of drought. The goal of this research project has been the development and application of the Electrodynamic Screen (EDS) as a means for a water-free, scalable cleaning process applicable to solar-power installations, including rooftop applications. We describe here the development of an EDS film-based cleaning process as an emerging method for use on PV modules, parabolic troughs, and heliostats. This report aims to show the feasibility of integrating or retrofitting EDS films onto the optical surfaces of solar collectors (both PV and CSP) while maintaining high transmission or reflection efficiency. The cleaning action provided by the EDS film is an active method to remove dust deposits by electrodynamic force. Current lab-scale prototype EDS films, retrofitted onto solar panels and mirrors, have shown to be capable of maintaining optical transmission or specular-reflection efficiencies higher than 90% of initial values under clean conditions. The optical surfaces of solar collectors laminated with EDS films can remove more than 90% of deposited dust when the EDS is activated for less than two minutes. As an electrodynamic dust removal process, the EDS film-based method is designed primarily for the removal of dust in solar installations located in semi-arid and desert areas, where the atmosphere is often dry and dusty and rainfall is infrequent. While EDS film application minimizes water consumption and facilitates cleaning as frequently as needed, it has limitations in removing contaminants such as soot, organic pollutants deposited as fine films on the surface, and bird droppings. The dust removal efficiency of the EDS is maximum at relative humidity RH is 40 to 50% and decreases at when RH > 65%. Many solar plant sites undergo diurnal and seasonal cycles of high ambient, early afternoon temperatures and an RH that reaches the dew point early in the morning. These variations in atmospheric conditions do not limit the operation of the EDS film. This report presents a brief review of the progress and the potential of EDS film technology for mitigating the impact of dust on solar collectors via water-free cleaning, as well as current technical challenges regarding efficiency and durability. Our experimental data on the performance of EDS films show that: (1) the dust-removal efficiency (DRE) can reach levels higher than 90%, (2) the specular reflectivity (SR) of EDS film-laminated second-surface mirrors reach levels in excess of 90%, (3) the specular reflectivity restoration (SRR) can exceed 90%, (4) the output-power restoration (OPR) of PV modules can exceed 95%, and (5) the optical transmission efficiency (TE) of the EDS films can be greater than 90%. Working with Sandia National Laboratories (NM), Corning Research and Development Corporation (NY), Eastman Kodak (NY), Tomark-Worthen Industries (NH), and EDS Chile SPA (Chile), we have produced EDS film-laminated PV modules and demonstrated their self-cleaning functions without requiring water. We have demonstrated that the operational range of EDS films will cover the expected ambient temperature of solar fields at RH cycling varying from 20 to 95% as long as the EDS films are activated in the RH range 20 to 50%. (Typical solar-field climates in deserts and semi-arid lands often reach near dew point in coastal areas.) Our experiments on the application of hydrophobic-fluorinated nanoparticle coatings on EDS film surfaces show that the EDS operational range can be extended to higher RH levels that approach the dew point. At Eastman Kodak, as one of our industrial partners, we were able to establish a process for manufacturing EDS films using flexographic printing of the electrodes onto transparent polymer films. This process utilizes an existing manufacturing line at Eastman Kodak that allows fabrication of medium-scale EDS films (26 cm × 30 cm). The manufacturing process has the capacity to produce EDS films at high production speeds. The medium-scale EDS films that have been printed at Kodak were evaluated in the lab at Boston University. The EDS films produced at Kodak were laminated at Tomark-Worthen using an industrial scale vacuum laminator to produce EDS film stacks, which can be affixed onto the optical surfaces of PV modules or concentrating mirrors. The EDS film stack consists of the EDS films that have Willow® Glass (WG) which has a thickness of 100 μm as the front surface. The WG sheets obtained from Corning Research and Development Corporation are customized in size and shape to cover the active area of the EDS films. The back surface of the EDS film stack is integrated onto the optical surface of the solar panel or mirror using optically clear adhesive (OCA) films or silicone adhesives. The OCA films (thickness 25 μm) are produced by 3M. The EDS film stacks have the architecture: WG/OCA/EDS Film/OCA/ over PV module or solar mirror. The power-supply units needed for activating the electrodes of the EDS film were designed and produced at Boston University. These power supply units provide three-phase, 1.2 kV voltage pulses at a very low current (micro-ampere) level and at a low frequency (≈ 5 Hz). The voltage pulses are applied to the electrodes in a sequence such that the train of pulses resembles a unidirectional traveling wave of electrical field on the surface of the EDS film. The dust particles on the surface become charged electrostatically and are levitated by the Coulomb force. The lateral sweeping action of the traveling electric field created by the three-phase voltages pulses then sweeps the dust off the surface. The energy consumed by the EDS electrodes is less than 0.2 Wh/m 2 /cleaning cycle, enabling energy-efficient restoration of output power (OPR) of PV module or specular reflectivity restoration (SRR) for solar mirrors. The EDS system consists of (1) an EDS film stack laminated onto the solar collectors, (2) connection of the EDS film to its power supply unit and (3) Interconnection of the power supply to PV modules or solar mirrors. Design, construction and assessment of field-testing units that have EDS stack laminated PV modules for evaluating the performance of the EDS films in solar fields is being carried out at BU. Our progress under this project, aimed at the advancement of EDS film technology, has reached DOE Technology Readiness Level (TRL) 6. Based on the extensive laboratory evaluations and limited field trials, as well as contacts with potential users, we believe that the technology has reached its commercial stage. We are conducting a cost analysis using the National Renewable Energy Laboratory (NREL) System Advisory Model (SAM) and are preparing for field trials of EDS films in different solar fields in the US, Chile, India and in the Middle East. A brief description of EDS film performance, construction and testing of the field-test unit, autonomous operation of the field-test unit for evaluating EDS performance in increasing energy yield, associated revenue savings, and water conservation is presented.

14 SOLAR ENERGY↗
DOE OSTI2022

Suppressing ion migration in metal halide perovskite via interstitial doping with a trace amount of multivalent cations

Cations with suitable sizes to occupy an interstitial site of perovskite crystals have been widely used to inhibit ion migration and promote the performance and stability of perovskite optoelectronics. However, such interstitial doping inevitably leads to lattice microstrain that impairs the long-range ordering and stability of the crystals, causing a sacrificial trade-off. Here, we unravel the evident influence of the valence states of the interstitial cations on their efficacy to suppress the ion migration. Incorporation of a trivalent neodymium cation (Nd 3+ ) effectively mitigates the ion migration in the perovskite lattice with a reduced dosage (0.08%) compared to a widely used monovalent cation dopant (Na + , 0.45%). As a result, the photovoltaic performances and operational stability of the prototypical perovskite solar cells are enhanced with a trace amount of Nd 3+ doping while minimizing the sacrificial trade-off.

36 MATERIALS SCIENCE↗
NASA NTRS2023

Assembly of the FOXSI-4 Mirror Modules

The Focusing Optics X-ray Solar Imager 4 (FOXSI-4) is a heliophysics sounding rocket experiment that is currently in its fourth launch campaign. The payload is comprised of seven x-ray telescopes, which each consist of a 2 m focal length grazing incidence mirror module that focuses x-rays onto an imaging detector. For this fourth flight, Marshall Space Flight Center (MSFC) designed, built, and tested three new high-angular-resolution mirror module assemblies (MMAs). This paper describes the design and assembly of the FOXSI-4 MMAs.

FOXSI-4↗
NASA NTRS1992

Thermal control paints on LDEF: Results of sub-experiment 802-18

Several thermal control paints were flown on the LDEF, including the white paints Chemglaze A276, S13GLo, and YB-71, and the black paint D-111. The effects of low earth orbit, which includes UV radiation and atomic oxygen, varied significantly with each paint and its location on LDEF. This paper will examine the performance of these paints as determined by changes in their optical and physical properties, including solar absorptance, surface chemical changes, and changes in surface morphology. It will also provide a correlation of these optical and physical property changes to the physical phenomena that occurred in these materials during the LDEF mission.

Jaggers, Christopher H.↗
DOE OSTI2022

Density measurements for the National Ignition Facility (NIF) opacity platform

The Opacity Platform on the National Ignition Facility (NIF) has been developed to measure opacities at varying densities and temperatures relevant to the solar interior and thermal cooling rates in white dwarf stars. The typical temperatures reached at NIF range between 150 and 210 eV, which allow these measurements to be performed experimentally. The captured opacities are crucial to validating radiation-hydrodynamic models that are used in astrophysics. The NIF opacity platform has a unique new capability that allows in situ measurement of the sample expansion. The sample expansion data are used to better understand the plasma conditions in our experiments by inferring the sample density throughout the duration of the laser drive. Here, we present the details of the density measurement technique, data analysis, and recent results for Fe and MgO.

47 OTHER INSTRUMENTATION↗
NASA NTRS1999

International Low-Earth-Orbit Spacecraft Materials Test Program Initiated for Better Prediction of Durability and Performance

Spacecraft in low Earth orbit (LEO) are subjected to many components of the environment, which can cause them to degrade much more rapidly than intended and greatly shorten their functional life. The atomic oxygen, ultraviolet radiation, and cross contamination present in LEO can affect sensitive surfaces such as thermal control paints, multilayer insulation, solar array surfaces, and optical surfaces. The LEO Spacecraft Materials Test (LEO-SMT) program is being conducted to assess the effects of simulated LEO exposure on current spacecraft materials to increase understanding of LEO degradation processes as well as to enable the prediction of in-space performance and durability. Using ground-based simulation facilities to test the durability of materials currently flying in LEO will allow researchers to compare the degradation evidenced in the ground-based facilities with that evidenced on orbit. This will allow refinement of ground laboratory test systems and the development of algorithms to predict the durability and performance of new materials in LEO from ground test results. Accurate predictions based on ground tests could reduce development costs and increase reliability. The wide variety of national and international materials being tested represent materials being functionally used on spacecraft in LEO. The more varied the types of materials tested, the greater the probability that researchers will develop and validate predictive models for spacecraft long-term performance and durability. Organizations that are currently participating in the program are ITT Research Institute (USA), Lockheed Martin (USA), MAP (France), SOREQ Nuclear Research Center (Israel), TNO Institute of Applied Physics (The Netherlands), and UBE Industries, Ltd. (Japan). These represent some of the major suppliers of thermal control and sensor materials currently flying in LEO. The participants provide materials that are exposed to selected levels of atomic oxygen, vacuum ultraviolet radiation, contamination, or synergistic combined environments at the NASA Lewis Research Center. Changes in characteristics that could affect mission performance or lifetime are then measured. These characteristics include changes in mass, solar absorptance, and thermal emittance. The durability of spacecraft materials from U.S. suppliers is then compared with those of materials from other participating countries. Lewis will develop and validate performance and durability prediction models using this ground data and available space data. NASA welcomes the opportunity to consider additional international participants in this program, which should greatly aid future spacecraft designers as they select materials for LEO missions.

Rutledge, Sharon K.↗