Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “small scale”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

3D Time-Lapse Electrical Resistivity Imaging of Rock Damage Patterns and Gas Flow Paths Resulting from Two Underground Chemical Explosions

Abstract Rock damage from underground nuclear explosions (UNEs) has a strong influence on sub-surface gas movement and on seismic waveform characteristics, both of which are used to detect UNEs. Although advanced numerical simulation capabilities exist to predict rock damage patterns and corresponding detection signals, those predictions are dependent on (generally) unknown properties of the host rock. For example, the effects of in-situ mechanical heterogeneities on the explosively generated damage/fractures that provide gas flow pathways to the surface are not well understood, due largely to the difficulty in accessing and characterizing the near-source region. In this paper we demonstrate the emerging use of electrical resistivity tomography (ERT) for imaging rock damage and gas flow patterns resulting from two relatively small-scale underground chemical explosions. Pre-explosion ERT and crosshole seismic imaging revealed a natural fracture zone within the test bed. Post-explosion imaging revealed that the damage zone was non-symmetric and was focused primarily within the pre-existing fracture zone, located 10 m above the first explosion and 5 m above the second explosion. Time-lapse ERT imaging of heated air injected into the detonation borehole revealed the primary gas flow paths to be within the upper margin of the same primary damage zone. These results point to the utility of ERT imaging for understanding rock damage and gas flow patterns under experimental conditions, and to the importance of understanding the effects of geologic heterogeneity on UNE detection signals, particularly gas surface breakthrough times.

58 GEOSCIENCES↗
DOE OSTI2022

Topology optimization for the design of porous electrodes

Porous electrodes are an integral part of many electrochemical devices since they have high porosity to maximize electrochemical transport and high surface area to maximize activity. Traditional porous electrode materials are typically homogeneous, stochastic collections of small-scale particles and offer few opportunities to engineer higher performance. Fortunately, recent breakthroughs in advanced and additive manufacturing are yielding new methods to structure and pattern porous electrodes across length scales. These architected electrodes are emerging as a promising new technology to continue to drive improvement; however, it is still unclear which structures to employ and few tools are available to guide their design. Here we address this gap by applying topology optimization to the design of porous electrodes. We demonstrate our framework on two applications: a porous electrode driving a steady Faradaic reaction and a transiently operated electrode in a supercapacitor. We present computationally designed electrodes that minimize energy losses in a half-cell. For low-conductivity materials, the optimization algorithm creates electrode designs with a hierarchy of length scales. Further, the designed electrodes are found to outperform undesigned, homogeneous electrodes. Finally, we present three-dimensional porous electrode designs. We thus establish a topology optimization framework for designing porous electrodes.

25 ENERGY STORAGE↗
DOE OSTI2024

Wire arc additive manufactured A36 steel performance for marine renewable energy systems

Additive manufacturing has established itself to be advantageous beyond small-scale prototyping, now supporting full-scale production of components for a variety of applications. Despite its integration across industries, marine renewable energy technology is one largely untapped application with potential to bolster clean energy production on the global scale. Wave energy converters (WEC) are one specific facet within this realm that could benefit from AM. As such, wire arc additive manufacturing (WAAM) has been identified as a practical method to produce larger scale marine energy components by leveraging cost-effective and readily available A36 steel feedstock material. The flexibility associated with WAAM can benefit production of WEC by producing more complex structural geometries that are challenging to produce traditionally. Additionally, for large components where fine details are less critical, the high deposition rate of WAAM in comparison to traditional wrought techniques could reduce build times by an order of magnitude. In this context of building and supporting WEC, which experience harsh marine environments, an understanding of performance under large loads and corrosive environments must be understood. Hence, WAAM and wrought A36 steel tensile samples were manufactured, and mechanical properties compared under both dry and corroded conditions. Here, the unique microstructure created via the WAAM process was found to directly correlate to the increased ultimate tensile and yield strength compared to the wrought condition. Static corrosion testing in a simulated saltwater environment in parallel with electrochemical testing highlighted an outperformance of corroded WAAM A36 steel than wrought, despite having a slighter higher corrosion rate. Ultimately, this study shows how marine energy systems may benefit from additive manufacturing components and provides a foundation for future applications of WAAM A36 steel.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Thermodynamic Implementations of Quantum Processes

Abstract Recent understanding of the thermodynamics of small-scale systems have enabled the characterization of the thermodynamic requirements of implementing quantum processes for fixed input states. Here, we extend these results to construct optimal universal implementations of a given process, that is, implementations that are accurate for any possible input state even after many independent and identically distributed (i.i.d.) repetitions of the process. We find that the optimal work cost rate of such an implementation is given by the thermodynamic capacity of the process, which is a single-letter and additive quantity defined as the maximal difference in relative entropy to the thermal state between the input and the output of the channel. Beyond being a thermodynamic analogue of the reverse Shannon theorem for quantum channels, our results introduce a new notion of quantum typicality and present a thermodynamic application of convex-split methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Spatially Quasi-Periodic Water Waves of Infinite Depth

Abstract We formulate the two-dimensional gravity-capillary water wave equations in a spatially quasi-periodic setting and present a numerical study of solutions of the initial value problem. We propose a Fourier pseudo-spectral discretization of the equations of motion in which one-dimensional quasi-periodic functions are represented by two-dimensional periodic functions on a torus. We adopt a conformal mapping formulation and employ a quasi-periodic version of the Hilbert transform to determine the normal velocity of the free surface. Two methods of time-stepping the initial value problem are proposed, an explicit Runge–Kutta (ERK) method and an exponential time-differencing (ETD) scheme. The ETD approach makes use of the small-scale decomposition to eliminate stiffness due to surface tension. We perform a convergence study to compare the accuracy and efficiency of the methods on a traveling wave test problem. We also present an example of a periodic wave profile containing vertical tangent lines that is set in motion with a quasi-periodic velocity potential. As time evolves, each wave peak evolves differently, and only some of them overturn. Beyond water waves, we argue that spatial quasi-periodicity is a natural setting to study the dynamics of linear and nonlinear waves, offering a third option to the usual modeling assumption that solutions either evolve on a periodic domain or decay at infinity.

Wilkening, Jon (ORCID:0000000327827596)↗
DOE OSTI2023

Changes in soil pore structure generated by the root systems of maize , sorghum and switchgrass affect in situ N 2 O emissions and bacterial denitrification

Due to the heterogeneous nature of soil pore structure, processes such as nitrification and denitrification can occur simultaneously at microscopic levels, making prediction of small-scale nitrous oxide (N 2 O) emissions in the field notoriously difficult. We assessed N 2 O+N 2 emissions from soils under maize (Zea mays L.), switchgrass (Panicum virgatum L.), and energy sorghum (Sorghum bicolor L.), three potential bioenergy crops in order to identify the importance of different N 2 O sources to microsite production, and relate N 2 O source differences to crop-associated differences in pore structure formation. The combination of isotopic surveys of N 2 O in the field during one growing season and X-ray computed tomography (CT) enabled us to link results from isotopic mappings to soil structural properties. Further, our methodology allowed us to evaluate the potential for in situ N 2 O suppression by biological nitrification inhibition (BNI) in energy sorghum. Our results demonstrated that the fraction of N 2 O originating from bacterial denitrification and reduction of N 2 O to N 2 is largely determined by the volume of particulate organic matter occluded within the soil matrix and the anaerobic soil volume. Bacterial denitrification was greater in switchgrass than in the annual crops, related to changes in pore structure caused by the coarse root system. This led to high N-loses through N 2 emissions in the switchgrass system throughout the season a novel finding given the lack of data in the literature for total denitrification. Isotopic mapping indicated no differences in N 2 O-fluxes or their source processes between maize and energy sorghum that could be associated with the release of BNI by the investigated sorghum variety. The results of this research show how differences in soil pore structures among cropping systems can determine both N 2 O production via denitrification and total denitrification N losses in situ.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Characterizing Peatland Microtopography Using Gradient and Microform-Based Approaches

Abstract Peatlands represent an important component of the global carbon cycle, storing 180–621 Gt of carbon (C). Small-scale spatial variations in elevation, frequently referred to as microtopography, influence ecological processes associated with the peatland C cycle, including Sphagnum photosynthesis and methane flux. Microtopography can be characterized with measures of topographic variability and by using conceptual classes (microforms) linked to function: most commonly hummocks and hollows. However, the criteria used to define these conceptual classes are often poorly described, if at all, and vary between studies. Such inconsistencies compel development of explicit quantitative methods to classify microforms. Furthermore, gradient-based characterizations that describe spatial variability without the use of microforms are lacking in the literature. Therefore, the objectives of this study were to (1) calculate peatland microtopographical elevation gradients and measures of spatial variability, (2) develop three microform classification methods intended for specific purposes, and (3) evaluate and contrast classification methods. Our results suggest that at spatial scales much larger than microforms, elevation distributions are unimodal and are well approximated with parametric probability density functions. Results from classifications were variable between methods and years and exhibited significant differences in mean hollow areal coverages of a raised ombrotrophic bog. Our results suggest that the conceptualization and classification of microforms can significantly influence microtopographic structural metrics. The three explicit methods for microform classification described here may be used and built upon for future applications.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Representative Phenomena of Cyclic Turbulent Combustion in High-Pressure Fuel Sprays

Abstract Cyclic variations in conventional diesel combustion engines can lead to large differences in engine out emissions even at steady operation. This study uses an optically accessible constant-pressure flow chamber to acquire fuel injections in quick succession to analyze mixing, auto-ignition, and combustion of diesel-surrogate n-heptane using multiple high-speed optical diagnostics. Prior studies have utilized fewer injections and/or they rely on analysis of ensemble average behavior. These approaches do not yield information on injection-to-injection variation or provide confidence in utilizing individual injection measurements for high-fidelity computational fluid dynamics(CFD) model validation. In this study, a large set of 500 injections is used to obtain global parameters including liquid length, vapor penetration length, ignition delay time, and lift-off length. Results for multiple injections are presented to illustrate large injection to injection variations. Potential sources for these variations are analyzed to conclude localized, small scale turbulence and rate of injection variations as the likely sources. Then, a statistical method based on z-scores is proposed and implemented to identify instantaneous injections that best represent the bulk data-set of jet boundaries measured independently by three different diagnostics. This synthesis of statistics-guided screening of data set and ensemble-average analysis offers higher confidence for CFD model validation relying upon both a representative single and average injection results.

42 ENGINEERING↗
DOE OSTI2024

A Study of Intermittent Turbulence in Stable Arctic Boundary Layers

Abstract Polar boundary layers are difficult to model due to the existence of intermittent turbulence within stable layers. Here we present a case study evaluation of coherent structures in a stable boundary layer observed during a series of flights with an uncrewed aircraft system (DataHawk2) on 19 October 2016 at Oliktok Point, Alaska as part of the ERASMUS (Evaluation of Routine Atmospheric Sounding Measurements using Unmanned Systems) field campaign. During a sequence of five flights over a nine-hour period, 57 profiles of atmospheric properties (0–400 m a.g.l) were collected. Turbulence was identified using derived Richardson Number, temperature structure function parameter, and turbulence kinetic energy dissipation. Throughout all flights on this strongly stable day, intermittent turbulence was observed. These turbulent layers showed well-mixed potential temperature profiles embedded within otherwise stable potential temperature profiles; often resulting in a characteristic staircase pattern. Turbulent layers ranged from 1 to 30 m deep, with most individual layers being 1–2 m deep. Vertical propagation velocities of layers in the lower atmosphere were on the order of a few cm s −1 , typical of non-convective environments. In different regions of the profile, turbulence was driven by a different balance of buoyancy and shear forces, with turbulence in the near surface environment driven by strong shear forces overcoming strong resistance to buoyancy, while turbulence in elevated layers characterized by weaker shear forces overcoming weaker resistance to buoyancy. We discuss the potential of such datasets for improving subgrid parameterizations of small-scale turbulence embedded within stable boundary layers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Nonlinear Impact-Echo Test for Quantitative Evaluation of ASR Damage in Concrete

Nonlinear acoustic methods demonstrate high sensitivity for concrete damage evaluation. Among these methods, nonlinear resonance acoustic methods have been widely used in laboratory tests on small scale test samples. In this study, a nonlinear impact-echo (IE) method for concrete damage evaluation was introduced, in which the IE frequency shift was measured at different impact force levels. The nonlinear IE test and the nonlinear impact resonance acoustic spectroscopy (NIRAS) test share similarities in the experimental setup and analysis method. However, the nonlinear IE test excites a local thickness resonance mode of a member instead of the global resonance vibration. Therefore, the analyzed mode is unaffected by member boundary conditions and is applicable to large concrete structural members. To identify the fundamental IE frequencies, multiple impacts were applied along the members. Once the fundamental IE frequencies were determined, the effectiveness of the nonlinear IE method was evaluated by testing seven concrete beam specimens with varying levels of alkali-silica reaction (ASR) damage. In conclusion, the nonlinear IE test demonstrates high sensitivity to concrete damage and allows for quantitative assessment of the damage state of concrete without a baseline measurement.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Primordial black hole mass functions as a probe of cosmic origin

Here, we discuss a novel window to probe the origin of our universe via the mass functions of primordial black holes (PBHs). The mass functions of PBHs are simply estimated using the conventional Press-Schechter formalism for two paradigms of cosmic origin, including inflationary ΛCDM and bounce cosmology. The standard inflationary ΛCDM model cannot generate an appreciable number of massive PBHs; however, non-trivial inflation models with blue-tilted power spectra at small scales and matter bounce cosmology provide formation mechanisms for heavy PBHs, which in turn, may seed the observed supermassive black holes (SMBHs). By fitting the SMBH mass functions at high redshift (z ~ 6) derived from Sloan Digital Sky Survey (SDSS) and Canada-France High-z Quasar Survey (CFHQS) quasars, for two paradigms of cosmic origin, we derive constraints on the PBH density fraction $f$ PBH at z ~ 6 and the characteristic mass M $\ast$ , with the prior assumption that all SMBHs stem from PBHs. We demonstrate that this newly proposed procedure, relying on astronomical measurements that utilize deep-field surveys of SMBHs at high redshift, can be used to constrain models of cosmic origin. Additionally, although not the main focus of this paper, we evolve the mass function from z ~ 6 to z ~ 0 through an assumption of 3 × 10 8 -year Eddington’s accretion, and give a rough estimation of $f$ PBH at z ~ 0.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

A Large Eddy Simulation Study of Flow Turbulence, Alumina Transport, and Bath Temperature Evolution in Conventional Aluminum-Smelting Cell Using OpenFOAM

In this study, a Large Eddy Simulation (LES) of the aluminum-smelting process is performed using OpenFOAM. To understand the coupled behavior of heat transfer, mass transfer, and flow of the smelting process, a multi-physics computational fluid dynamics (CFD) model based on the Eulerian–Eulerian multi-fluid approach is adopted. The model accounts for CO 2 bubble and magnetohydrodynamics (MHD)-driven flow, along with alumina dissolution, transport, and bath temperature evolution. The simulation predictions show small-scale turbulent vortical structures in the anode–cathode space caused by combined effect of MHD and CO 2 bubble-bath interactions and relatively large-scale asymmetric vortices in the inter-anode space caused by the CO 2 bubble-bath interactions. The vortex formation at the edges of the anodes evidently aids in transporting alumina from the central channel to the bottom of the anodes and prevents accumulation of gas bubbles in the periphery of the anode bottom. Symmetric bath cold spots are observed in the vicinity of the feeder. Cold spots are also observed in the anode–cathode distance space below the anode bottom due to the transport of undissolved solid to this region by the flow. The findings from the work are useful in developing and designing alumina-feeding strategy leading to reduced anode effects and smooth operation of the cell. The work also highlights the important flow structures in conventional aluminum-smelting cell.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Carbon flowers as electrocatalysts for the reduction of oxygen to hydrogen peroxide

Small-scale and decentralized production of H 2 O 2 via electrochemical reduction of oxygen is of great benefit, especially for sanitization, air and water purification, as well as for a variety of chemical processes. The development of low-cost and high-performance catalysts for this reaction remains a key challenge. Carbon-based materials have drawn substantial research efforts in recent years due to their advantageous properties, such as high chemical stability and high tunability in active sites and morphology. Deeper understanding of structure–activity relationships can guide the design of improved catalysts. We hypothesize that mass transport to active sites is of great importance, and herein we use carbon materials with unique flower-like superstructures to achieve high activity and selectivity for O 2 reduction to H 2 O 2 . The abundance of nitrogen active sites controlled by pyrolysis temperature resulted in high catalytic activity and selectivity for oxygen reduction reaction (ORR). The flower superstructure showed higher performance than the spherical nanoparticles due to greater accessibility to the active sites. Chemical activation improves the catalysts’ performances further, driving the production of H 2 O 2 to a record-setting rate of 816 mmol·g cat -1 ·h -1 using a bulk electrolysis setup. In conclusion, this work demonstrates the development of a highly active catalyst for the sustainable production of H 2 O 2 through rational design and synthetic control. The understanding from this work provides further insight into the design of future carbon-based electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Parameters, Properties, and Process: Conditional Neural Generation of Realistic SEM Imagery Toward ML-Assisted Advanced Manufacturing

Abstract The research and development cycle of advanced manufacturing processes traditionally requires a large investment of time and resources. Experiments can be expensive and are hence conducted on relatively small scales. This poses problems for typically data-hungry machine learning tools which could otherwise expedite the development cycle. We build upon prior work by applying conditional generative adversarial networks (GANs) to scanning electron microscope (SEM) imagery from an emerging advanced manufacturing process, shear-assisted processing and extrusion (ShAPE). We generate realistic images conditioned on temper and either experimental parameters or material properties. In doing so, we are able to integrate machine learning into the development cycle, by allowing a user to immediately visualize the microstructure that would arise from particular process parameters or properties. This work forms a technical backbone for a fundamentally new approach for understanding manufacturing processes in the absence of first-principle models. By characterizing microstructure from a topological perspective, we are able to evaluate our models’ ability to capture the breadth and diversity of experimental scanning electron microscope (SEM) samples. Our method is successful in capturing the visual and general microstructural features arising from the considered process, with analysis highlighting directions to further improve the topological realism of our synthetic imagery.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Benchmark study of the DTU OWC chamber with both two-way and one-way absorption

This paper reports on a benchmark study based on small-scale (1:50) measurements of a single, oscillating water column chamber mounted sideways in a long flume. The geometry of the OWC chamber is extracted from a barge-like, attenuator-type floating concept “KNSwing” with 40 chambers targeted for deployment in the Danish part of the North Sea. In addition to traditional two-way energy extraction we also consider one-way energy extraction with passive venting and compare chamber response, pressures and total absorbed energy between the two methods. A blind study was established for the numerical modeling, with participants applying several implementations of weakly nonlinear potential flow theory and commercial Navier–Stokes solvers (CFD). Both compressible and incompressible models were used for the air phase. Potential flow calculations predict more energy absorption near the chamber resonance for one-way absorption than for two-way absorption, but the opposite is found from the experimental measurements. This outcome is mainly attributed to energy losses in the experimental passive valve system, but this conclusion must be confirmed by better experimental measurements. Modeling the one-way valve in CFD proved to be very challenging and only one team was able to provide results which were generally closer to the experiments. The study illustrates the challenges associated with both numerical and experimental analysis of OWC chambers. Air compressibility effects were not found to be important at this scale, even with the large volume of additional air used for the one-way case.

16 TIDAL AND WAVE POWER↗
DOE OSTI2026

Water availability modulates maximum canopy heights of low-elevation Amazonian second-growth forests

Tropical second-growth forests of the Amazon sequester large amounts of carbon and are important carbon sinks, contributing substantially to climate change mitigation, biodiversity conservation, and providing crucial ecosystem services. Deforestation due to selective logging and shifting cultivation is expanding second-growth forest areas in tropical forest regions, which if well managed, regenerate rapidly over time. Maximum forest canopy height is an important metric of biomass and carbon accumulation in second-growth forests and is strongly influenced by water availability. The water limitation hypothesis explains the positive influence of water availability on maximum tree heights and has been examined and demonstrated at a small-scale using field data, and at a global scale, with limited accuracy, using remote sensing data in tropical ecosystems. However, this hypothesis concerning maximum canopy height has not been much studied at regional and national scales for tropical second-growth forests. In this study, we leveraged NASA GEDI spaceborne lidar data across the Brazilian Amazon and derived second-growth forest relative height metrics for delineating the influence of water availability, second-growth forest age, and topographic elevation on maximum canopy height. Water availability was found to significantly influence the maximum canopy height of second-growth forest trees, of age range from 30 to 35 years, at elevations less than 500 m and maximum precipitation thresholds of 1500 mm. Our results indicate that changing precipitation patterns or increased drought conditions under different climate change regimes could impact forest structure, plant communities, ecosystem functioning, and carbon sequestration capabilities of tropical second-growth forests in the Amazon.

Carbon sequestration↗
DOE OSTI2024

Environmental Monitoring and Risk Assessment for Marine Energy Systems

There is a growing interest in marine energy development around the world, but the industry is still in its early stages, with only a limited number of small-scale deployments thus far. One significant challenge lies in understanding and mitigating the potential environmental impact of deploying and operating marine energy systems on aquatic animals. To address these challenges, many monitoring technologies and risk assessment tools have been developed or are currently in development. This chapter delves into these technologies, such as biotelemetry, passive acoustic monitoring, active sonars, and autonomous sensors, to underscore their significant and practical applications.

Deng, Zhiqun↗
DOE OSTI2020

Ultrahigh temperature in situ transmission electron microscopy based bicrystal coble creep in Zirconia II: Interfacial thermodynamics and transport mechanisms

This work uses a combination of stress dependent single grain boundary Coble creep and zero-creep experiments to measure interfacial energies, along with grain boundary point defect formation and migration volumes in cubic ZrO 2 . These data, along with interfacial diffusivities measured in a companion paper are then applied to analyzing two-particle sintering. The analysis presented here indicates that the large activation volume, v * = v f + v m primarily derives from a large migration volume and suggests that the grain boundary rate limiting defects are delocalized, possibly due to electrostatic interactions between charge compensating defects. The discrete nature of the sintering and creep process observed in the small-scale experiments supports the hypothesis that grain boundary dislocations serve as sources and sinks for grain boundary point defects and facilitate strain during sintering and Coble creep. Model two-particle sintering experiments demonstrate that initial-stage densification follows interface reaction rate-limited kinetics.

36 MATERIALS SCIENCE↗