Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “site map”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Strategy for Ranking the Science Value of the Surface of Asteroid 101955 Bennu for Sample Site Selection for Osiris-REx

OSRIS-REx is NASA's New Frontiers 3 sample return mission that will return at least 60 g of pristine surface material from near-Earth asteroid 101955 Bennu in September 2023. The scientific value of the sample increases enormously with the amount of knowledge captured about the geological context from which the sample is collected. The OSIRIS-REx spacecraft is highly maneuverable and capable of investigating the surface of Bennu at scales down to the sub-cm. The OSIRIS-REx instruments will characterize the overall surface geology including spectral properties, microtexture, and geochemistry of the regolith at the sampling site in exquisite detail for up to 505 days after encountering Bennu in August 2018. The mission requires at the very minimum one acceptable location on the asteroid where a touch-and-go (TAG) sample collection maneuver can be successfully per-formed. Sample site selection requires that the follow-ing maps be produced: Safety, Deliverability, Sampleability, and finally Science Value. If areas on the surface are designated as safe, navigation can fly to them, and they have ingestible regolith, then the scientific value of one site over another will guide site selection.

Nakamura-Messenger, K.↗

Landsat-D thematic mapper simulation in an urban area using aircraft multispectral scanner data

A simulation of imagery from the Landsat-D thematic mapper was conducted in order to determine its usefulness for urban land-use classification. Aircraft 24-channel multispectral scanner imagery of the Los Angeles area at 7.5-m resolution was processed digitally by means of matrix averaging and image smoothing techniques to simulate the 30-m resolution of the thematic mapper. Mean and standard deviation statistics of training sites for resolutions of 7.5, 15, 30 and 60 m were used to generate final classification maps. Plots of relative standard deviation showed that for larger training sites, as the resolution decreased, the distribution range of density values also decreased, while plots of relative classification accuracies showed that as resolution decreased, classification accuracies for three levels of standard deviation increased. A point of diminishing returns was indicated, however, confirming the utility of the resolution intended for Landsat-D.

Clark, J.↗

Ecological Monitoring and Compliance Program 2008 Report

The Ecological Monitoring and Compliance Program, funded through the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO), monitors the ecosystem of the Nevada Test Site (NTS) and ensures compliance with laws and regulations pertaining to NTS biota. This report summarizes the program’s activities conducted by National Security Technologies, LLC (NSTec), during calendar year 2008. Program activities included (a) biological surveys at proposed construction sites, (b) desert tortoise compliance, (c) ecosystem mapping and data management, (d) sensitive plant species monitoring, (e) sensitive and protected/regulated animal monitoring, (f) habitat monitoring, (g) habitat restoration monitoring, and (h) monitoring of the Nonproliferation Test and Evaluation Complex (NPTEC).

54 ENVIRONMENTAL SCIENCES↗

Tectonic motion site survey of the National Radio Astronomy Observatory, Green Bank, West Virginia

A geological and geophysical site survey was made of the area around the National Radio Astronomy Observatory (NRAO) to determine whether there are at present local tectonic movements that could introduce significant errors to Very Long Baseline Interferometry (VLBI) geodetic measurements. The site survey consisted of a literature search, photogeologic mapping with Landsat and Skylab photographs, a field reconnaissance, and installation of a seismometer at the NRAO. It is concluded that local tectonic movement will not contribute significantly to VLBI errors. It is recommended that similar site surveys be made of all locations used for VLBI or laser ranging.

Webster, W. J., Jr.↗

The Red River Valley archeological project

The Red River Valley Archeology Project is a long-term effort involving numerous individuals and institutions engaged in archeological investigations in the Texas and Oklahoma portions of the Red River Valley. To date the focus of the project was on site location. The project acquired both Thermal Infrared Multispectral Scanner (TIMS), TMS, and color infrared photographs over a significant portion of the project area in an effort to define signatures for archeological sites and to assist in the detailed geomorphological mapping of the flood plain. Preliminary analysis of acquired data indicates that both the TIMS and TMS can make a substantial contribution to landform definition, the identification of cultural resources, and to the clarification of site-landform correlations in this riverine environment.

Bennett, Jack↗

A New View of the Lunar South Pole from the Lunar Orbiter Laser Altimeter (LOLA)

Upcoming missions to the lunar south pole require detailed maps over large areas to fully characterize landing sites locally and regionally and to place their data into proper geologic context. To that end, we enhanced the Lunar Orbiter Laser Altimeter (LOLA) altimetry dataset for the south polar region, from which we produced new maps of topography, topographic roughness, and permanently shadowed regions (PSRs). The roughness maps reveal a diversity of terrains characterized by hectometer-scale roughness which is controlled in this region primarily by cratering and downslope mass transport. The south polar region is littered with linear roughness features of order ~1 – 10 km wide and ~10s – 100s of km long hypothesized to be secondary impacts within extended ejecta rays. Non uniformities in these features could reflect variations in secondary impactor properties and/or target terrain properties. Poleward of 80° S, the PSR cumulative size-frequency distribution (CSFD) shows an approximately power-law behavior whose exponent has a spatial variation of ~10%. PSRs with areas < 1 km2 contain 15 ± 5% of the total PSR area. Finally, we studied the effect of false positives and false negatives on the accuracy of the measured PSR cumulative size-frequency distribution (CSFD) and on the area for any individual PSR. The new maps presented here have many applications in the science and exploration of the lunar south polar region, such as geologic mapping and traverse planning.

Michael K. Barker↗

Autonomous Safe Landing Site Detection for a FutureMars Science Helicopter

Future Mars Rotorcrafts require advanced navigation capabilities to enable all terrain access for science investigations with long distance flights that are executed fully autonomously. A critical component is the ability to safely land in hazardous terrain as part of a mission, or triggered by an emergency situation. In this paper, we present an advanced navigation system for continuous on-board terrain reconstruction for the purpose of hazard-free landing site detection for the autonomous navigation of a Mars Science Helicopter - a JPL research concept that investigates the feasibility of flying a multi-kilogram science payload at various Mars science locations, with flight ranges of multiple kilometers per flight. Our approach builds on a visionbased perception system that incorporates an on-board visualinertial state estimator augmented by a laser altimeter (range- VIO), and a structure-from-motion 3D reconstruction approach that uses a single, downward-looking camera to provide dense depth measurements while the vehicle is in motion. Depth measurements are accumulated in a local, robot-centric, multiresolution elevation map that is analyzed by a landing site detector to extract safe landing areas below the rotorcraft, based on a heuristic that includes slope, roughness and the presence of landing hazards. Detected landing sites are prioritized by an on-board autonomy engine that either selects suitable landing sites for immediate landing maneuvers, or can explore a terrain location as part of a mission in order to find a best landing site in a pre-planned area. We demonstrate and evaluate our approach on simulated data and data acquired with a surrogate unmanned aerial system (UAS) executing flights over relevant terrain.

Tzanetos, Teddy↗

STAR FORMATION AND DISTRIBUTIONS OF GAS AND DUST IN THE CIRCINUS CLOUD

We present results of a study on the Circinus cloud based on {sup 13}CO (J = 1 - 0) data as well as visual to near-infrared (JHK{sub S}) extinction maps, to investigate the distributions of gas and dust around the cloud. The global {sup 13}CO distribution of the Circinus cloud is revealed for the first time, and the total molecular mass of the cloud is estimated to be 2.5 x 10{sup 4} M{sub sun} for the assumed distance 700 pc. Two massive clumps in the cloud, called Circinus-W and Circinus-E, have a mass of {approx}5 x 10{sup 3} M{sub sun}. These clumps are associated with a number of young stellar objects (YSOs) searched for in the literature, indicating that they are the most active star-forming sites in Circinus. All of the extinction maps show good agreement with the {sup 13}CO distribution. We derived the average N({sup 13}CO)/A{sub V} ratio in the Circinus cloud to be 1.25 x 10{sup 15} cm{sup -2} mag{sup -1} by comparing the extinction maps with the {sup 13}CO data. The extinction maps also allowed us to probe into the reddening law over the Circinus cloud. We found that there is a clear change in dust properties in the densest regions of Circinus-W and Circinus-E, possibly due to grain growth in the dense cloud interior. Among the YSOs found in the literature, we attempted to infer the ages and masses of the H{alpha} emission-line stars forming in the two clumps, and found that they are likely to be younger than 1 Myr, having a relatively small mass of {approx}<2 M{sub sun} at the zero-age main sequence.

79 ASTRONOMY AND ASTROPHYSICS↗

Ecological Monitoring and Compliance Program 2009 Report

The Ecological Monitoring and Compliance Program (EMAC), funded through the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, monitors the ecosystem of the Nevada Test Site and ensures compliance with laws and regulations pertaining to NTS biota. This report summarizes the program’s activities conducted by National Security Technologies, LLC, during calendar year 2009. Program activities included (a) biological surveys at proposed construction sites, (b) desert tortoise compliance, (c) ecosystem mapping and data management, (d) sensitive plant species monitoring, (e) sensitive and protected/regulated animal monitoring, (f) habitat monitoring, (g) habitat restoration monitoring, and (h) monitoring of the Nonproliferation Test and Evaluation Complex. During 2009, all applicable laws, regulations, and permit requirements were met, enabling EMAC to achieve its intended goals and objectives.

54 ENVIRONMENTAL SCIENCES↗

Preliminary geologic mapping of central Chryse Planitia, Mars

Because of the success of the Viking lander mission, central Chryse Planitia represents one of two areas on the Martian surface where planetary geologic mapping is added by ground-truth observations. The broadscale geology of Chryse Planitia and the geology of the Viking 1 landing site have been previously examined by other investigators. A 1:500,000 scale mapping of central Chryse Planitia and the Viking landing site was undertaken to synthesize these results and to address the following: (1) the depositional and erosional history of the Chryse Planitia basin; (2) the degree to which the Viking 1 surface materials are representative of the Chryse Planitia regions and of plains in general; (3) the extent of channel materials versus ridged plains materials; and (4) the primary objectives of future missions to the surface of Mars. The preliminary results of the investigation are presented.

Craddock, Robert A.↗

A Method for Peat Inventory Based on LANDSAT Data and Computerized Mapping

Wetlands were preliminarily delineated on a geometrically-corrected color composite map printed from digital LANDSAT data using a computerized color plotting system. A digital classification was performed to identify the location and extent of wetland types (e.g., open bog, types of treed fen and black spruce-alder swamp). A map is printed from the results of this classification using the computerized color plotter. This color-coded map, produced at several different scales, provides a basis for pre-selecting field sampling sites. Helicopter-aided spot sampling based on the LANDSAT-derived map was conducted over the entire 1700 sq km area of North Ontario. Traditional transect sampling was carried out over a portion of the area, so that the two methods could be compared. Spot sampling based on the LANDSAT-derived map was found to produce results virtually identical to those produced by the transect sampling technique, in approximately one-fifteenth of the time and with a proportionate reduction in cost.

Pala, S.↗

Next Generation System Analysis Model Recently Added Features and Future Plans - Abstract

The Nuclear Waste Policy Act of 1982, as amended (NWPA 1982), established the federal government’s responsibility to accept spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from waste owners and generators for ultimate disposition. SNF generated by the current fleet of commercial nuclear reactors is being stored at the reactor sites in spent fuel pools (SFPs) and in dry independent spent fuel storage installations (ISFSIs). The US Department of Energy Office of Nuclear Energy (DOE-NE) is developing an Integrated Waste Management Program (IWMP) comprising a suite of options and supporting analyses to enable future informed choices. The IWMP is applying integrated waste management system architecture analysis, system engineering, and decision analysis principles to inform potential future decisions regarding potential nuclear waste management system architectures. Architecture analyses of the IWM system are being conducted to support the future deployment of a comprehensive system for managing nuclear waste that considers all major aspects of the back end of the nuclear fuel cycle (i.e., transportation, storage, and disposal). The Next Generation System Analysis Model (NGSAM) is an agent-based simulation software tool designed for the express purpose of modeling the IWM system. NGSAM imports data from the Oak Ridge National Laboratory (ORNL) Unified Database (e.g., historic assembly information, thermal profiles for assembly heat, at-reactor dry storage loadings) to ensure that the simulation initializes with a realistic representation of the state of commercial SNF in the United States. Recent major enhancements that have been implemented into NGSAM since NGSAM was last presented at the WM2019 conference include: • Tracking of railroad escort and buffer car acquisition. • Addition of heavy haul and barge routes for some sites, as well as support for user-defined inter-modal routes. • Updates to the logic that checks the thermal maps prior to package transport. • Addition of an allocation method that predicts when reactor sites will pack assemblies from their pools for dry storage and allocates packages to those reactor sites in the preceding periods, favoring direct transport packages and reducing the number of packages that reactor sites pack for dry storage at their ISFSIs. • Addition of reactor site family operational limits, which are used to limit the number of loads from the pool and from dry storage at a given reactor site per year. • Support has been added for multiple canister loading maps and packages having multiple compatible transportation overpacks. • Updates in the handling of non-commercial fuel, including a new database containing data to support the updates. • Support for repackaging at reactor sites. • Implementing additional output reports or modifying existing reports. • User edits can now be created and edited via the NGSAM website. • Ability to load packages for dry storage at ISF pools. • Same-type package blending at DOE sites. • Support for multi-mode transloading at reactor sites. These new features have improved NGSAM capabilities and/or improve the user experience with the model and will be discussed in more detail. The initial NGSAM requirements for advanced reactor fuels, reprocessing, treatment, and conditioning are preliminary and are described at a high level in this paper: analysts will provide more specific requirements to the NGSAM team in the future. Additionally, there are many data needs associated with modeling advanced reactors in NGSAM, but many of the data or plans are still in progress and/or yet to be fully defined. However, this document describes an initial exploration of the data relevant to this program. Advanced reactor data will likely require revision as concepts evolve and new considerations are made. This is a technical paper that does not take into account contractual limitations or obligations under the Standard Contract for Disposal of Spent Nuclear Fuel and/or High-Level Radioactive Waste (Standard Contract) (10 CFR Part 961). For example, under the provisions of the Standard Contract, spent nuclear fuel in multi-assembly canisters is not an acceptable waste form, absent a mutually agreed to contract amendment. To the extent discussions or recommendations in this paper conflict with the provisions of the Standard Contract, the Standard Contract governs the obligations of the parties, and this paper in no manner supersedes, overrides, or amends the Standard Contract. This paper reflects technical work which could support future decision making by DOE. No inferences should be drawn from this paper regarding future actions by DOE, which are limited both by the terms of the Standard Contract and Congressional appropriations for the Department to fulfill its obligations under the Nuclear Waste Policy Act including licensing and construction of a spent nuclear fuel repository.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Representativeness assessment of the pan-Arctic eddy covariance site network and optimized future enhancements

Abstract. Large changes in the Arctic carbon balance are expected as warming linked to climate change threatens to destabilize ancient permafrost carbon stocks. The eddy covariance (EC) method is an established technique to quantify net losses and gains of carbon between the biosphere and atmosphere at high spatiotemporal resolution. Over the past decades, a growing network of terrestrial EC tower sites has been established across the Arctic, but a comprehensive assessment of the network's representativeness within the heterogeneous Arctic region is still lacking. This creates additional uncertainties when integrating flux data across sites, for example when upscaling fluxes to constrain pan-Arctic carbon budgets and changes therein. This study provides an inventory of Arctic (here > = 60∘ N) EC sites, which has also been made available online (https://cosima.nceas.ucsb.edu/carbon-flux-sites/, last access: 25 January 2022). Our database currently comprises 120 EC sites, but only 83 are listed as active, and just 25 of these active sites remain operational throughout the winter. To map the representativeness of this EC network, we evaluated the similarity between environmental conditions observed at the tower locations and those within the larger Arctic study domain based on 18 bioclimatic and edaphic variables. This allows us to assess a general level of similarity between ecosystem conditions within the domain, while not necessarily reflecting changes in greenhouse gas flux rates directly. We define two metrics based on this representativeness score: one that measures whether a location is represented by an EC tower with similar characteristics (ER1) and a second for which we assess if a minimum level of representation for statistically rigorous extrapolation is met (ER4). We find that while half of the domain is represented by at least one tower, only a third has enough towers in similar locations to allow reliable extrapolation. When we consider methane measurements or year-round (including wintertime) measurements, the values drop to about 1/5 and 1/10 of the domain, respectively. With the majority of sites located in Fennoscandia and Alaska, these regions were assigned the highest level of network representativeness, while large parts of Siberia and patches of Canada were classified as underrepresented. Across the Arctic, mountainous regions were particularly poorly represented by the current EC observation network. We tested three different strategies to identify new site locations or upgrades of existing sites that optimally enhance the representativeness of the current EC network. While 15 new sites can improve the representativeness of the pan-Arctic network by 20 %, upgrading as few as 10 existing sites to capture methane fluxes or remain active during wintertime can improve their respective ER1 network coverage by 28 % to 33 %. This targeted network improvement could be shown to be clearly superior to an unguided selection of new sites, therefore leading to substantial improvements in network coverage based on relatively small investments.

54 ENVIRONMENTAL SCIENCES↗

Urban and regional land use analysis: CARETS and Census Cities experiment package

The author has identified the following significant results. The arrival of the so-called energy crisis makes the portion of this experiment dealing with land use climatology of more immediate significance than before, since in addition to helping to understand the processes of climatic change associated with urbanization, the knowledge obtained may be useful in assigning an energy balance impact factor to proposed changes in land use in and around cities. Thermal maps derived from S-192 data are to be used as a measure of the energy being radiated into space from the mosaic of different surfaces in and around the city. While presenting excellent spatial sampling potential for a metropolitan area tests site, the Skylab data permit a very poor temporal sampling opportunity, owing to the large number of factors beyond the investigator's control that determine when data will be taken over a given test site. The strategy is to augment the thermal maps derived from S-192 with a modeling technique which enables the simulation of a number of components of the surface energy balance, calculated at regular time intervals throughout the day or year. Preliminary tests on the performance of the model are still underway, using airborne MSS data from NASA aircraft flights. Results look extremely promising.

Alexander, R. H.↗

SRS 2010 Vegetation Inventory GeoStatistical Mapping Results for Custom Reaction Intensity and Total Dead Fuels

This report of the geostatistical analysis results of the fire fuels response variables, custom reaction intensity and total dead fuels is but a part of an SRS 2010 vegetation inventory project. For detailed description of project, theory and background including sample design, methods, and results please refer to USDA Forest Service Savannah River Site internal report “SRS 2010 Vegetation Inventory GeoStatistical Mapping Report”, (Edwards & Parresol 2013).

60 APPLIED LIFE SCIENCES↗

MOLA-Based Landing Site Characterization

The Mars Global Surveyor (MGS) Mars Orbiter Laser Altimeter (MOLA) data provide the basis for site characterization and selection never before possible. The basic MOLA information includes absolute radii, elevation and 1 micrometer albedo with derived datasets including digital image models (DIM's illuminated elevation data), slopes maps and slope statistics and small scale surface roughness maps and statistics. These quantities are useful in downsizing potential sites from descent engineering constraints and landing/roving hazard and mobility assessments. Slope baselines at the few hundred meter level and surface roughness at the 10 meter level are possible. Additionally, the MOLA-derived Mars surface offers the possibility to precisely register and map project other instrument datasets (images, ultraviolet, infrared, radar, etc.) taken at different resolution, viewing and lighting geometry, building multiple layers of an information cube for site characterization and selection. Examples of direct MOLA data, data derived from MOLA and other instruments data registered to MOLA arc given for the Hematite area.

Duxbury, T. C.↗

The multiscale coarse-graining method. XI. Accurate interactions based on the centers of charge of coarse-grained sites

It is essential to be able to systematically construct coarse-grained (CG) models that can efficiently and accurately reproduce key properties of higher-resolution models such as all-atom. To fulfill this goal, a mapping operator is needed to transform the higher-resolution configuration to a CG configuration. Certain mapping operators, however, may lose information related to the underlying electrostatic properties. In this paper, a new mapping operator based on the centers of charge of CG sites is proposed to address this issue. Four example systems are chosen to demonstrate this concept. Within the multiscale coarse-graining framework, CG models that use this mapping operator are found to better reproduce the structural correlations of atomistic models. The present work also demonstrates the flexibility of the mapping operator and the robustness of the force matching method. For instance, important functional groups can be isolated and emphasized in the CG model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗