SEARCH · Engineering Papers

Results for “scaled testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

All sources NASA NTRS DOE OSTI

NASA NTRS1993

Liquid oxygen (LO2) propellant conditioning concept testing

Testing of a simplified LO2 propellant conditioning concept for future expendable launch vehicles is discussed. Four different concepts are being investigated: no-bleed, low-bleed, use of a recirculation line, and He bubbling. A full-scale test article, which is a facsimile of a propellant feed duct with an attached section to simulate heat input from an LO2 turbopump, is to be tested at the Cold Flow Facility of the Marshall Space Flight Center West Test Area. Work to date includes: design and fabrication of the test article, design of the test facility and initial fabrication, development of a test matrix and test procedures, initial predictions of test output, and heat leak calibration and heat exchanger tests on the test articles.

Perry, Gretchen L. E.↗

NASA NTRSDate not supplied

Development and Analysis of Energy Absorbing Subfloor Concepts to Improve eVTOL Crashworthiness

To help ensure safe transportation within electric Vertical Take-off and Landing (eVTOL) vehicles the National Aeronautics and Space Administration (NASA) has been developing novel energy absorbing (EA) design technologies to improve crashworthiness within the unique design constraints of these vehicles. As part of this effort, a series of lightweight energy absorbing subfloor concepts were developed for potential use within eVTOL vehicle design. The capability of the subfloor designs was first evaluated through finite element (FE) model simulation in both component and vehicle level impact conditions. Knowledge gained from these analyses were used to iterate upon the design prior to fabrication. Fabrication and testing of the subfloor designs has begun and will be used to verify predicted capability. Results from FE model analysis was used to down select to a final subfloor geometry for additional component level optimization and full-scale test validation.

eVTOL↗

NASA NTRSDate not supplied

Development of Energy Absorbing Subfloor Concepts to Improve Crashworthiness of eVTOL Aircraft

Crashworthiness↗

DOE OSTI2023

Distributed Coaxial Cable Sensors for In-Situ Condition Based Monitoring of Coal-Fired Boiler Tubes

The increasing contributions of renewable energy sources present new challenges to the operation and maintenance of the existing coal-fired power plants. One of the major operational risks is the unexpected failure of superheater boiler tubes, leading to the most unplanned power plant outrages. The boiler tube failure is difficult to predict due to the harsh operating environments. Therefore, condition-based monitoring (CBM) with a reliable high temperature sensor becomes necessary to produce a meaningful assessment of the health condition of boiler tubes and their remaining lifetime. In this work, the stainless-steel and quartz coaxial cable sensor (SSQ-CCS) is proposed for in-situ distributed monitoring of the boiler tube temperatures in existing coal-fired power plants. Comprehensive tests have been conducted with an in-house testing facility at Clemson University to study and evaluate the sensors’ performance in the temperature range of 100℃ to 600℃. The results indicated that the measurement resolution of the SSQ-CCS sensor is better than 1℃, and the drift is less than 2% over long-period testing. Meanwhile, multi-physics finite element analysis has been conducted to optimize the design and evaluate the safety of the SSQ-CCS temperature sensor under various operational conditions. Based on the performance obtained in the laboratory-scale testing, a field test has been implemented at a power plant. Four SSQ-CCS temperature sensors were installed for in-situ monitoring of the temperatures of a power plant’s superheat tube assembles. The data acquisition system has been successfully set up and collected sensing signals for more than three months. The sensing signals have been post-processed, and the monitored temperature history through the SSQ-CCS temperature sensor has been validated and compared with the conventional high temperature thermal couple data.

Jiao, Xinyu↗

DOE OSTI2022

The Astronomy Commons Platform: A Deployable Cloud-based Analysis Platform for Astronomy

Abstract We present a scalable, cloud-based science platform solution designed to enable next-to-the-data analyses of terabyte-scale astronomical tabular data sets. The presented platform is built on Amazon Web Services (over Kubernetes and S3 abstraction layers), utilizes Apache Spark and the Astronomy eXtensions for Spark for parallel data analysis and manipulation, and provides the familiar JupyterHub web-accessible front end for user access. We outline the architecture of the analysis platform, provide implementation details and rationale for (and against) technology choices, verify scalability through strong and weak scaling tests, and demonstrate usability through an example science analysis of data from the Zwicky Transient Facility’s 1Bn+ light-curve catalog. Furthermore, we show how this system enables an end user to iteratively build analyses (in Python) that transparently scale processing with no need for end-user interaction. The system is designed to be deployable by astronomers with moderate cloud engineering knowledge, or (ideally) IT groups. Over the past 3 yr, it has been utilized to build science platforms for the DiRAC Institute, the ZTF partnership, the LSST Solar System Science Collaboration, and the LSST Interdisciplinary Network for Collaboration and Computing, as well as for numerous short-term events (with over 100 simultaneous users). In a live demo instance, the deployment scripts, source code, and cost calculators are accessible. 4 4 http://hub.astronomycommons.org/

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRSDate not supplied

Origami-based Composite Space Structures

The main objective of my internship was working on developing a new type of deployable composite for space structures and new method of deployment via use of origami, composites, UV curing resins, and shape memory polymers. My role in the project was to collect an initial literature survey on the subject including origami, the history of deployable space structures, previous issues and problems faced in the field, previous and current research being done on the structural aspect as well as the materials aspect of the subject. I presented this information to our team, where we discussed and determined our research focus and project design specs. We have been making or will make decisions on the project’s purpose, material, origami type, manufacturing method, and testing methods. I am now in charge of the protype design as we enter the design stage of our research. I am using PTC Creo software to design the structural aspects of the first protype so that we can begin small scale testing. I will perform data analysis in order to review the results with our team, so we can make the next design decisions regarding changes or iterations of the design. We hope to renew this project in the next fiscal year in order to increase the TRL of the project so that it can eventually be used in multiple functions in space such as the construction of lunar habitats. In just my brief time with NASA, I have gained so much personally and professionally. I developed my ability to search through and narrow down information when doing research. In the weekly meetings I practiced presenting information to my peers and superiors, and, just as importantly, discussing and adapting to what we were learning. I acquired experience in using technology to my advantage including remote work, new software like PTC Creo, NASA archives, and connecting with others beyond my team to gain help. I enjoyed the immense resource of knowledge that my mentors had to offer, and that they gave me a large amount of responsibility in this research. I truly felt like I was contributing to something bigger than myself and understood how directly I was involved in NASA’s work. This internship has further cemented my love for space and desire to continue in the field. I have a better understanding of the research and development process and am now considering joining a research lab with my university next year.

Composite↗

DOE OSTI2023

Development of In-Situ Chlorine Generator for Metal Purification (End of Contract Report)

It has been demonstrated that rare-earth and actinide metals can be purified via conversion to chlorides and heating to volatilize impurities. To this end, BYU has been working towards designing, building, and testing a system that incorporates the chlorine gas generation method into the chloride volatility process. The efforts made towards the project tasks listed in the Statement of Work are addressed in the following sections. Finally, a report on information related to this project that has been published or presented is addressed. By the end of the contract period, small-scale tests using LaCl 3 -CaCl 2 to generate Cl 2 had been conducted, the produced Cl 2 was successfully reacted with Ce foil to create CeCl 3 , initial designs for the large-scale apparatus were completed, and manufacturing for the large-scale apparatus had begun.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

Considerations for realistic atmospheric environments: An application to corrosion testing

Measured salt compositions in dust collected over roughly the last decade from surfaces of in-service stainless-steel alloys at four locations around the United States are presented, along with the predicted brine compositions that would result from deliquescence of these salts. The salt compositions vary greatly from ASTM seawater and from laboratory salts (i.e., NaCl or MgCl 2 ) commonly used on corrosion testing. The salts contained relatively high amounts of sulfates and nitrates, evolved to basic pH values, and exhibited deliquescence relative humidity values (RH) higher than seawater. Additionally, inert dust in components were quantified and considerations for laboratory testing are presented. The observed dust compositions are discussed in terms of the potential corrosion behavior and are compared to commonly used accelerated testing protocols. Finally, ambient weather conditions and their influence on diurnal fluctuations in temperature (T) and RH on heated metal surfaces are evaluated and a relevant diurnal cycle for laboratory testing a heated surface has been developed. Suggestions for future accelerated tests are proposed that include exploration of the effects of inert dust particles on atmospheric corrosion, chemistry considerations, and realistic diurnal fluctuations in T and RH. Understanding mechanisms in both realistic and accelerated environments will allow development of a corrosion factor (i.e., scaling factor) for the extrapolation of laboratory-scale test results to real world applications.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

Advanced Mooring Lines for Marine Energy Workshop – Summary Report

This report summarizes the outcomes of the virtual Advanced Mooring Lines for Marine Energy Workshop. The workshop convened experts from industry, academia, and national laboratories to identify key challenges associated with the deployment of synthetic mooring lines for marine energy applications. Discussions focused on four technical areas—materials, failure and degradation, testing, and modeling. Despite the significant promise of leveraging synthetic mooring systems for marine energy applications, discussion highlighted broader research and development needed to address the lack of validated long-term performance data, insufficient structural health monitoring frameworks, limited large-scale testing capabilities, and gaps in predictive modeling. Overall, the workshop emphasized the importance of coordinated research and development efforts to advance reliable, durable, and cost-effective synthetic mooring solutions for marine energy applications.

16 TIDAL AND WAVE POWER↗

NASA NTRS1973

Computer simulation of temperatures on the Centaur standard shroud during heated jettison tests

A heating fixture for simulating the heating and environment encountered by the Centaur standard shroud (CSS) during its ascent through the earth's atmosphere is discussed. A computer program was developed to provide a means of determining the overall temperature profile of a free-skin model of the CSS during the heating portion of the heated jettison tests. The program treats the energy contribution of each lamp on the heater to various points on the CSS surface. The analytic model was verified by adapting the computer program to the configuration of the hardware used in a series of Intermediate Scale Tests performed on a 2.4 meters by 2.4 meters section of the CSS corrugated structure. A comparison of some predicted versus experimental results from these tests is presented.

Hemminger, J. A.↗

DOE OSTI2022

Purification of Degraded Aqueous Piperazine by Ion Exchange and Carbon Treating

Amine purification by ion exchange and carbon treating has been performed for decades to maintain low solvent impurity levels in amines used in natural gas sweetening. The use of these purification methods to remove dissolved metal catalysts and other impurities from amines used in post-combustion carbon capture is less well known. This report presents batch experiments testing the equilibrium adsorption of impurities from degraded piperazine (PZ) onto activated carbon and various ion exchange resins. Compared to cationic exchange, anionic exchange was found to better remove catalytic Fe and UV active species, making it a better candidate for large-scale PZ purification. Carbon treating greatly outperforms anion exchange in the removal of UV active species, but the adsorbents’ difference is less pronounced for the removal of other impurities. Equilibrium adsorption was determined by the UV absorption of the PZ solution at 320 nm, and the results will show this may not be an accurate way to determine equilibrium. Further bench-scale experiments comparing ion exchange and carbon treating are necessary before advancing to larger-scale testing.

amine purification↗

NASA NTRS1984

Passive microwave remote sensing of soil moisture from an aircraft platform

A series of experiments were conducted over several years using an aircraft platform to study the relationship between passive microwave data and surface soil moisture. Sensor systems included thermal infrared and multifrequency passive microwave instruments. Aircraft measurements were obtained concurrently with ground observations of soil moisture and land cover. Test sites included areas in both humid and semiarid regions of the United States that were typical of these regions. Data analyses indicated that the basic cause and effect relationships between the sensor measurements and soil moisture can be extrapolated from theory and small scale tests to larger resolution elements observed by the aircraft. Pastures in different climatic regions showed similar responses. Vegetation canopy attenuation was verified. Based on these studies the optimal surface soil moisture sensor using passive techniques was a 21-cm wavelength radiometer.

Jackson, T. J.↗

NASA NTRS1975

Transonic wind tunnel tests of A.015 scale space shuttle orbiter model, volume 1

Transonic wind tunnel tests were run on a 0.015 scale model of the Space Shuttle Orbiter Vehicle in an eight-foot tunnel during August 1975. The purpose of the program was to obtain basic shuttle aerodynamic data through a full range of elevon and aileron deflections, verification of data obtained at other facilities, and effects of Reynolds numbers. The first part of a discussion of test procedures and results in both tabular and graphical form were presented. Tests were performed at Mach numbers from 0.35 to 1.20, and at Reynolds numbers for 3.5 million to 8.2 million per foot. The angle of attack was varied from -1 to +20 degrees at sideslip angles of -2, 0, +2 degrees. Sideslip was varied from -6 to +8 degrees at constant angles of attack from 0 to +20 degrees. Various aileron and ailevon settings were tested for various angles of attack.

Struzynski, N. A.↗

NASA NTRS1937

Method of curved models and its application to the study of curvilinear flight of airships. Part I

In the first part of this paper we shall present the theoretical side of the problem of constructing curved model forms and the method of testing the model. In the second part we shall present a detailed account of the first experiments according to the given method, carried out with a curved model of the nonrigid airship V-2, and a comparison of the experimental results with some data of full-scale tests made with this airship in 1933.

Gourjienko, G A↗

NASA NTRS1998

Hybrid IR-Gas Heater for Automated Tow Placement

A hybrid infrared-hot gas heat source has been developed and tested for the NASA Langley Tow Placement Facility. The IR heat source provides supplemental heat to the nip region. The additional heat is intended to reduce the need for conduction heating by the compaction roller, which causes (he roller to stick to the panel surface. Initial bench scale testing was performed to identify the most effective means of focusing IR energy into the nip region. A compact lamp and reflector that placed the lamp as close to the nip point as possible was found to deliver the highest heat flux in the nip region. A prototype heater was installed on the NASA Langley tow placement robot. Panels placed with a 400 C (sticking) compaction roller gave DCB initiation toughness numbers comparable to those reported for autoclave processed panels but were found to have unexpectedly high void contents. Placement with compaction roller temperatures that prevented roller sticking resulted in mode I fracture toughness approximately 70% that reported for autoclave processed panels. The variability in strength among specimens placed with reduced roller temperature was found to be greatly reduced, which implies that use of supplemental nip point heat may improve the robustness of the tow placement process. Use of the IR heat source permitted placement with a compaction roller temperature that would have resulted in negligible interfacial strength with the hot gas torch alone. The roller temperature reductions eliminated the need for the robot operator to attend placement operations.

Grenoble, Ray W.↗

NASA NTRS2001

An Overview of NASA's In-Space Cryogenic Propellant Management Technologies

Future mission planning within NASA continues to include cryogenic propellants for in space transportation, with mission durations ranging from days to years. Between 1995 and the present, NASA has pursued a diversified program of ground-based testing to prepare the various technologies associated with in-space cryogenic fluid management (CFM) for implementation. CFM technology areas being addressed include passive insulation, zero gravity pressure control, zero gravity mass gauging, capillary liquid acquisition devices, and zero boiloff storage. NASA CFM technologies are planned, coordinated, and implemented through the Cryogenic Technology Working Group which is comprised of representatives from the various NASA Centers as well as the National Institute of Standards and Technologies (NIST) and, on selected occasions, the Air Force. An overview of the NASA program and Marshall Space Flight Center (MSFC) roles, accomplishments, and near-term activities are presented herein. Basic CFM technology areas being addressed include passive insulation, zero gravity pressure control, zero gravity mass gauging, capillary liquid acquisition devices, and zero boiloff storage. Recent MSFC accomplishments include: the large scale demonstration of a high performance variable density multilayer insulation (MLI) that reduced the boiloff by about half that of standard MLI; utilization of a foam substrate under MLI to eliminate the need for a helium purge bag system; demonstrations of both spray-bar and axial-jet mixer concepts for zero gravity pressure control; and sub-scale testing that verified an optical sensor concept for measuring liquid hydrogen mass in zero gravity. In response to missions requiring cryogenic propellant storage durations on the order of years, a cooperative effort by NASA's Ames Research Center, Glenn Research Center, and MSFC has been implemented to develop and demonstrate zero boiloff concepts for in-space storage of cryogenic propellants. An MSFC contribution to this cooperative effort is a large-scale demonstration of the integrated operation of passive insulation, destratification/pressure control, and cryocooler (commercial unit) subsystems to achieve zero boiloff storage of liquid hydrogen. Testing is expected during the Summer of 2001.

Tucker, Stephen↗

DOE OSTI2023

Enabling Entrained-Flow Gasification of Blends of Coal, Biomass and Plastics (Final Report)

This project demonstrated the technical feasibility of gasifying blends of coal, biomass and mixed waste plastics in a high pressure entrained-flow gasifier for production of hydrogen. This was achieved by creating slurries of coal, biomass pyrolysis liquids and liquefied plastic oil. Specific objectives of the project included (1) determining compositions of coal-biomass-plastic mixtures that produce a stable slurry suitable for pumping to high pressure, (2) designing and testing a novel burner to effectively atomize the mixed feedstock slurry in a pressurized gasifier, and (3) acquiring first-of-a-kind performance data for pressurized, oxygen-blown entrained-flow gasification of slurried blends of coal, biomass and plastic. A key focus of the project was preparation of mixtures of coal, biomass and plastic. To facilitate easy pumping to high pressure, slurries were created using (i) bioliquid resulting from a well-established rapid thermal treatment pyrolysis process, (ii) oil produced from waste plastic via an available thermal conversion process, and (iii) ground coal. Lab-scale tests were conducted to evaluate viscosity and stability/propensity for the mixtures to separate over time. Larger batches of the most promising slurry compositions were prepared and subjected to pumping studies. It was found that mixtures containing less than about 40% coal and less than about 30% plastic oil were stable and of low enough viscosity to facilitate pumping to high pressure. A high-performance hot oxygen burner (HOB) was designed and fabricated for use in an existing 1 ton/day pressurized entrained-flow gasifier. Ex-situ testing demonstrated that the HOB provides excellent atomization of the slurries and creates a very uniform and robust flame. Performance of the HOB in the gasifier was exceptional and resulted in better conversion to syngas than any previous generation of burner. Fabricating the HOB for this project was challenging due to the relatively small scale of the gasifier. Performance in larger-scale systems is expected to be even better. Gasification of mixtures of coal, bioliquid and plastic oil proved to be relatively easy. The gasifier was able to be started up, pressurized and transitioned to the blended slurry feedstock with no technical difficulty. Syngas rich in CO and H 2 , with relatively low concentrations of CO 2 , was produced. During startup and at low gasification temperatures, soot formation was observed, as is typical for gasification of petroleum-based feedstocks. No slag buildup was observed under the conditions tested. The project was successful in demonstrating the technical feasibility of the concept. Future development should broaden the range of feedstocks under consideration, more deeply explore performance of the gasifier, and evaluate scale-up and implementation strategies.

08 HYDROGEN↗

DOE OSTI2025

IOTA Pre-Bake Test Development

The IOTA (Integrable Optics Test Accelerator) Bakeout project is intended to improve the quality of the vacuum within the IOTA ring. Impurities consisting of hydrogen and oxygen that build within the beampipe are reduced through applying heat to the beampipe’s exterior. Two versions of the Bakeout project exist, one as a smaller scale test setup, and one five times larger located within the IOTA ring. During my internship, I worked together with a team to bring this project from an effectively dormant state to ready for testing, working together to create full documentation of the PLC (Programmable Logic Controller) programs, making multiple new hardware configurations of this test possible, as well as an additional safety system.

Seagrave, Kayla [DuPage Coll.; Fermilab]↗