Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “regolith”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Chemical model for Viking biology experiments - Implications for the composition of the Martian regolith

The labelled-release and the gas-exchange experiments of the 1976 Mars Viking biology experiment program detected, respectively, C-14 labelled gases and O2 gas. A chemical model is proposed here for these experiments in which the reactants are an inorganic nitrate salt which has been partly photolyzed by ultraviolet light and a sparingly soluble metal carbonate such as calcite. The model reproduces the main effects seen, indicating that nitrates are present in the Martian regolith as well as calcite (or some other carbonate with similar solubility).

Plumb, Robert C.↗

Metamorphism of cosmic dust: Processing from circumstellar outflows to the cometary regolith

Metamorphism of refractory particles continues in the interstellar medium (ISM) where the driving forces are sputtering by cosmic ray particles, annealing by high energy photons, and grain destruction in supernova generated shocks. Studies of the depletion of the elements from the gas phase of the interstellar medium tell us that if grain destruction occurs with high efficiency in the ISM, then there must be some mechanism by which grains can be formed in the ISM. Most grains in a cloud which collapses to form a star will be destroyed; many of the surviving grains will be severely processed. Grains in the outermost regions of the nebula may survive relatively unchanged by thermal processing or hydration. It is these grains which one hopes to find in comets. However, only those grains encased in ice at low temperature can be considered pristine since a considerable degree of hydrous alteration might occur in a cometary regolith if the comet enters the inner solar system. The physical, chemical and isotopic properties of a refractory grain at each stage of its life cycle will be discussed.

Nuth, Joseph A., III↗

Oxygen production by pyrolysis of lunar regolith

Oxygen was identified as the most important product of initial lunar materials processing efforts. A source of oxygen on the Moon provides an alternative to the costly transport of propellant to the Moon or to low earth orbit. Pyrolysis, or vapor-phase reduction, involves heating a feedstock to temperatures sufficient to decompose the constituent metal oxides and release oxygen. The process relies on the vaporization of metal oxides in the form of reduced suboxides or atomic species. The reduced species must then be condensed without re-oxidizing, yielding oxygen in the gas phase. The feasibility of obtaining oxygen from common lunar minerals was demonstrated using solar furnace experiments. These results are discussed together with chemical equilibrium models which were extended to include the multicomponent oxides used in experiments. For the first time, both experiments and theoretical models dealt with the complex oxides that make up potential lunar feedstocks. Two major conclusions are drawn from this preliminary work. First, unbeneficiated regolith is a suitable feedstock for pyrolysis. Second, the process can operate at moderate temperatures, circa 2000 K, which could be supplied by direct solar or electrical energy. In addition to these advantages in choice of feedstock and energy source, the pyrolysis process requires no chemicals or reagents, making it an attractive process for lunar oxygen production.

Senior, Constance L.↗

Consolidation of lunar regolith: Microwave versus direct solar heating

The production of construction materials on the lunar surface will require an appropriate fabrication technique. Two processing methods considered as being suitable for producing dense, consolidated products such as bricks are direct solar heating and microwave heating. An analysis was performed to compare the two processes in terms of the amount of power and time required to fabricate bricks of various size. The regolith was considered to be a mare basalt with an overall density of 60 pct. of theoretical. Densification was assumed to take place by vitrification since this process requires moderate amounts of energy and time while still producing dense products. Microwave heating was shown to be significantly faster compared to solar furnace heating for rapid production of realistic-size bricks.

Kunitzer, J.↗

Controlled environment crop production - Hydroponic vs. lunar regolith

The potential of controlled environment crop production in a lunar colony is discussed. Findings on the effects of optimal root-zone and aerial environments derived as part of the NASA CELSS project at Utah State are presented. The concept of growing wheat in optimal environment is discussed. It is suggested that genetic engineering might produce the ideal wheat cultivar for CELSS (about 100 mm in height with fewer leaves). The Utah State University hydroponic system is outlined and diagrams of the system and plant container construction are provided. Ratio of plant mass to solution mass, minimum root-zone volume, maintenance, and pH control are discussed. A comparison of liquid hydrophonic systems and lunar regoliths as substrates for plant growth is provided. The physiological processes that are affected by the root-zone environment are discussed including carbon partitioning, nutrient availability, nutrient absorption zones, root-zone oxygen, plant water potential, root-produced hormones, and rhizosphere pH control.

Bugbee, Bruce G.↗

The Olton, Texas, H chondrite regolith breccia - Paired with Dimmitt

The Olton ordinary chondrites (two stones found in 1948) are H group, solar wind-bearing regolith breccias. The proximity of the recovery site to the Dimmitt strewnfield, and the similarity in texture, composition, noble gas contents and isotopic ratios to Dimmitt indicate that Olton is paired with Dimmitt.

Keil, Klaus↗

Separation of lunar ilmenite - Basalt vs. regolith

The paper presents the advantages and disadvantages of using lunar basalt or regolith as feedstock for an ilmenite extraction scheme. The ilmenite on the lunar surface is more reduced than ilmenite found on earth, hence, separation practices followed on earth cannot be used on the moon. The paper critically examines methods of ilmenite extraction on the lunar surface.

Dela'o, K. A.↗

Regolith-structure modeling of lunar facilities

The mechanical properties of lunar regolith are significantly different from terrestrial soils; at low stress levels, the ultimate strength envelope is highly nonlinear, and the material is essentially dilatant. The effects of platen friction, membrane confinement, and material self weight in triaxial tests have been shown to be of great significance in low stress level tests. An inverse identification technique has been devised to account for these effects where the load-displacement response of the entire specimen, including the boundary conditions and the self-weight, was analyzed by nonlinear finite element techniques so as to obtain true material parameters.

Perkins, Steven W.↗

A Lunar Penetrator to Determine Solar-wind-implanted Resources at Depth in the Lunar Regolith

Several volatiles implanted into the lunar regolith by the solar wind are potentially important lunar resources. He-3 might be mined as a fuel for lunar nuclear fusion reactors. Even if the mining of He-3 turns out not to be feasible, several other elements commonly implanted by the solar wind (H,C, and N) could be important for life support and for propellant or fuel production for lunar bases. A simple penetrator-borne instrument package to measure the abundance of H at depth is proposed. Since solar-wind-implanted volatiles tend to correlate with one another, this can be used to estimate global inventories and to design extraction strategies for all of these species.

Boynton, W.↗

Vertical regolith shield wall construction for lunar base applications

Lunar bases located on the lunar surface will require permanent protection from radiation and launch ejecta. This paper outlines a method of providing physical protection using lunar regolith that is constructed in situ as a modular vertical wall using specially devised methods of containment and construction. Deployable compartments, reinforced with corner struts, are elevated and filled by a moving gantry. The compartments interlock to form a stable wall. Different wall heights, thicknesses, and plan configurations are achieved by varying the geometry of the individual compartments, which are made from woven carbon fibers. Conventional terrestrial structural engineering techniques can be modified and used to establish the structural integrity and performance of the wall assembly.

Kaplicky, Jan↗

The Apollo 17 regolith

Among Apollo landing sites, Apollo 17 provides the best opportunity to study the efficiency of formation and evolution of regolith by impacts, both large and small. The mare-highlands interface is crucial to this endeavor, but the Light Mantle avalanche and presence of fine-grained pyroclastics offer additional constraints. Compositional variation among soils from different locations and depths provides a means to quantify the extent of mixing by larger impacts. Because of their variety and complex history, Apollo 17 soils have been important in establishing agglutinate abundance, mean grain size, and abundance of fine-grained iron metal (as measured by (I(sub s)/FeO)) as simple index of maturity (relative extent of reworking by micrometeorite impact at the surface). The following topics are discussed: (1) surface soils; (2) cores taken on the mission; (3) gray soil from station 4; (4) components with unknown sources; (5) important points; and (6) future work.

Korotev, Randy L.↗

Lunar regolith and structure mechanics

The topics are presented in viewgraph form and include the following: modeling of regolith-structure interaction in extraterrestrial constructed facilities; densification of lunar soil simulant; and vibration assisted penetration of lunar soil simulant.

Barnes, Frank↗

Ice in the Martian regolith

A number of possible morphologic indicators of ground ice on Mars are discussed, with emphasis on rampart craters and terrain softening. Geologic evidence indicates that the Martian surface has been substantially modified by the action of liquid water, and that much of that water still resides beneath the surface as ground ice. Calculations of the thermodynamic stability of ground ice on Mars suggest that it can exist very close to the surface at high latitudes, but can persist only at substantial depths near the equator. A variety of observed Martian landforms can be attributed to creep of the Martian regolith abetted by deformation of ground ice. Global mapping of creep features also supports the idea that ice is present in near-surface materials at latitudes higher than +/- 30 deg, and suggests that ice is largely absent from such materials at lower latitudes.

Squyres, S. W.↗

On the negative polarization of light scattered by subwavelength regolithic grains

Recent laboratory polarimetric measurements of light scattering by layers of alumina grains of different size are used to examine the relevance of the Wolff & Dollfus (1990) theory of negative polarization, which has been developed to describe light scattering by regolithic grains of arbitrary size. It is demonstrated that, while reproducing satisfactorily the main polarization characteristics of light scattering by grains much greater than the wavelength, this theory does not describe the negative polarization of light measured by Geake & Geake (1990) for subwavelength-sized grains. The smallest grains exhibit a polarization feature that may be called the 'polarization opposition effect'. This feature requires an alternative explanation and may be due to the so-called weak localization of photons in discrete random media.

Kolokolova, L. O.↗

Lunar regolith analogues - Spectral reflectance properties of compositional variations

The effect is analyzed of variations in glass, end member abundance, and compositional variations on the reflectance spectra of glass and mafic silicate-bearing mineral mixtures chosen to reproduce spectral reflectance properties of lunar regoliths. The spectral properties of the glasses appear to be sensitive to parameters such as fusion techniques and initial composition. Variations in these parameters can yield classes which show spectral variations far in excess of those found for naturally occurring lunar impact-derived glasses and surface fines. The addition of glass to a mafic silicate-bearing assemblage results in a reduction in overall reflectance, band depths, and band area ratios, as well as a general decrease in band II minimum wavelength position and an increase in interband peak position.

Cloutis, Edward A.↗

Regolith breccia consisting of H and LL chondrite mixture

Antarctic meteorite Yamato-8424 (Y-8424) is a regolith breccia that is homogenized mixture of H and LL chondrite components. The breccia consists mainly of a fine-grained material with mineral fragments of olivine, pyroxene, and Fe-Ni metal with traces of plagioclase.

Yanai, Keizo↗

Grain size of the surface regolith of asteroid 4 Vesta estimated from its reflectance spectrum in comparison with HED meteorites

The grain-size distribution of the regolith of asteroid 4 Vesta has been estimated by comparing its reflectance spectra (0.3-2.6 microns) with those of HED meteorites. The finest grain-size separate (less than 25 micrometers) of a particular howardite has a reflectance spectrum most similar to Vesta's. In order to better simulate Vesta's surface mineralogy, reflectance spectra of those finest HED meteorite powders were linearly combined, and Vesta's spectrum was scaled for the best fit between them. Both the albedo and the shape of reflectance spectrum of Vesta were well reproduced by regional mixtures of the finest (less than 25 micrometers) powders of HED meteorites. The result suggests the heterogeneity of Vesta's surface and provides an estimate of the visible reflectance of Vesta that is close to its Infrared Astronomical Satellite (IRAS) albedo. Thus, this suggests that fine grains can be generated and retained by relatively small bodies (Vesta is approximately 500 km in diameter).

Hiroi, Takahiro↗

Diffusion of Na and K in the uppermost regolith of Mercury

We examine the conditions under which ions impacting the Hermean surface can act as a regional source of enhanced atmospheric column through ion implantation and subsequent release at the surface. At most latitudes, energetic (a few keV) Na or K ions which impact the nightside surface, are released quickly (well before noon) upon warming of the surface. We show that the relative sunrise/sunset difference produced by ion implantation is ((n)(sub SR) - (n)(sub SS)/(n)(sub Ave) = f, where f is the fraction of the photo-ions recycled, (n)(sub SR) is the average zenith column above the sunrise portion of the illuminated hemisphere, (n)(sub SS) is the average zenith column in the sunset portion, and (n)(sub Ave) is the average column over the sunlit disk. Thus, to produce a large sunrise/sunset difference via ion implantation and subsequent release requires efficient (close to total) recycling. We show that the most extensive set of available data reduced to Na column abundance does not show any sunrise enhancement. We argue that the K data do not permit an unambiguous interpretation in favor of sunrise/sunset differences. We further find that if an efficient surface loss process for the alkali is not operating after sunrise, the initial Na and K distribution will relax into the bulk of the solid. Preserved abundance gradients of Na and K in lunar glasses that the Arrhenius coefficients for impact glasses are likely more modest than those for laboratory glasses derived from rock by nonimpact processes, but the effect of the more modest diffusion rates is only to delay the efficient loss of Na by a few Earth days. We argue that implantation can lead to observable regional increases in the observed Na or K column densities only if it occurs at very high latitudes, where diffusion is slow. It is typically lower energy ions which impact at high latitude and these are both more numerous than the high energy ions and possess smaller average penetration depths; thus there are additional reasons to favor a high-latitude locus for any possible prompt return related increases in zenith column. We find that we cannot rule out sputtering as a source process, as the low-energy ions are efficient sputterers. Finally, we argue that the observed Na/K ratio in the atmopshere may be the expression of their different asymptotic rates of loss from the interiors of the regolith grains. If so, this allows us to fix the importance of sputtering and photon stimulated desorption relative to impact vaporization.

Killen, R. M.↗