Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “real time experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

High accuracy in-situ direct gas analysis of Li-ion batteries

Cycling of lithium-ion batteries containing Ni-rich NMC cathodes at high voltage involves intense gas generation. From the safety standpoint, it is critical to understand how different gas species respond to changes of upper cut-off voltages. In this manuscript, we introduce a novel experimental set up for real-time analysis of gas generation in prismatic pouch cells. In a typical experiment, a lithium-ion pouch cell is directly connected to a quadruple mass spectrometer by glass capillary. Pressure difference helps move the generated gases to the mass spectrometer column for full analysis. The gaseous species are probed during both formation cycle and aging cycles in Li-ion pouch cells comprising NMC811 cathode and graphite anode. The gases are generated upon the creation of the solid electrolyte interphase on graphite during the first formation charge. Besides ethylene gas, C 2 H 4 , whose occurrence is related to the decomposition of ethylene carbonate, a minor solvent decomposition happened at a lower voltage is demonstrated to be associated with residue water on the electrode. For aging cycles, three upper cut-off voltages have been selected to investigate the gas evolution behavior upon charging to 4.2, 4.4 and 4.6 V. Higher upper cut-off voltages do not affect the amount of O 2 measured as a part of the generated oxygen could have reacted with electrolytes. Quite similar and low amounts of O 2 remain in the cells upon charging to the selected cut-off voltages. On the other hand, the generation of CO 2 has been found to be very sensitive to upper cut-off voltage. During similar aging cycles, 6167 nmol $g_{NMC}^{-1}$ of CO 2 is generated at 4.6 V, versus 1650 nmol $g_{NMC}^{-1}$ of CO 2 at 4.4 V, versus 91 nmol $g_{NMC}^{-1}$ of CO 2 at 4.2 V.

25 ENERGY STORAGE↗
DOE OSTI2025

The real-time data processing and acquisition system for Project 8 Phase II

In Phase II of the Project 8 neutrino mass experiment, electrons from the decays of tritium or 83m Kr are detected via their ≈26 GHz cyclotron radiation while contained within a circular waveguide. The signal from a given electron is characterized as a brief chirp, lasting ≲10 ms and changing in frequency by ≲1 MHz/ms. To detect these signals, the Project 8 collaboration developed a Data Acquisition (DAQ) system tailored to the signal properties. The DAQ is responsible for simultaneously selecting up to three 100 MHz-wide frequency windows to study, detect, and trigger on likely signals from different electron kinetic energies, and for writing the relevant data to disk. Finally, we describe the Phase II DAQ system in detail and address how the system was used for data-taking operations.

Data acquisition↗
DOE OSTI2020

Neural network based prediction of no-wall β N limits due to ideal external kink instabilities

Multi-layer perceptron based neural networks (NNs) are trained to predict the Troyon no-wall beta limits due to the onset of low-n (n = 1 – 3, n is the toroidal mode number) ideal external kink instabilities in tokamak plasmas. It is revealed that a well-trained NN can predict the n = 1 no-wall beta limit within 10% relative error. The NN performance is somewhat worse for the n = 2 and 3 no-wall beta limits, but still a relative error within 20% is achievable. The trained NNs well reproduce the known dependences of the no-wall beta limits on the plasma pressure (pressure peaking factor) and current (plasma internal inductance) profiles. Other scalings are further easily established with NNs, for parametric dependences such as on the aspect ratio, the elongation and triangularity of the plasma boundary shape. These NN-based Troyon beta limit predictors can be incorporated into integrated modeling platforms, or directly implemented as a real time stability estimator for the purpose of disruption avoidance or mitigation during experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Comprehensive Material Characterization and Simultaneous Model Calibration for Improved Computational Simulation Credibility

Computational simulation is increasingly relied upon for high-consequence engineering decisions, and a foundational element to solid mechanics simulations is a credible material model. Our ultimate vision is to interlace material characterization and model calibration in a real-time feedback loop, where the current model calibration results will drive the experiment to load regimes that add the most useful information to reduce parameter uncertainty. The current work investigated one key step to this Interlaced Characterization and Calibration (ICC) paradigm, using a finite load-path tree to incorporate history/path dependency of nonlinear material models into a network of surrogate models that replace computationally-expensive finite-element analyses. Our reference simulation was an elastoplastic material point subject to biaxial deformation with a Hill anisotropic yield criterion. Training data was generated using either a space-filling or adaptive sampling method, and surrogates were built using either Gaussian process or polynomial chaos expansion methods. Surrogate error was evaluated to be on the order of 10 ⁻5 and 10 ⁻3 percent for the space-filling and adaptive sampling training data, respectively. Direct Bayesian inference was performed with the surrogate network and with the reference material point simulator, and results agreed to within 3 significant figures for the mean parameter values, with a reduction in computational cost over 5 orders of magnitude. These results bought down risk regarding the surrogate network and facilitated a successful FY22-24 full LDRD proposal to research and develop the complete ICC paradigm.

36 MATERIALS SCIENCE↗
DOE OSTI2025

The real-time data processing and acquisition system for Project 8 Phase II

In Phase II of the Project 8 neutrino mass experiment, electrons from the decays of tritium or 83 m Kr are detected via their ≈ 26GHz cyclotron radiation while contained within a circular waveguide. The signal from a given electron is characterized as a brief chirp, lasting ≲ 10ms and changing in frequency by ≲ 1MHz/ms. To detect these signals, the Project 8 collaboration developed a Data Acquisition (DAQ) system tailored to the signal properties. The DAQ is responsible for simultaneously selecting up to three 100MHz-wide frequency windows to study, detect, and trigger on likely signals from different electron kinetic energies, and for writing the relevant data to disk. We describe the Phase II DAQ system in detail and address how the system was used for data-taking operations.

Ashtari Esfahani, A. [Washington U., Seattle; Shar↗
DOE OSTI2022

Flexible and Accessible 4D Subsurface Visualization Using a Web-Based Platform

4D subsurface visualization using a web platform can provide improved communication, education and outreach to non-experts and stakeholders. It allows for the improved understanding of complex relationships and interactions that occur in inaccessible locations of which many experimental testbeds exist in. The use of a web-based visualization tool lessens the cognitive impact further by reducing the need of specialized software. Users can define their own exploration of a 3D or 4D scene, adding and removing data as needed and are able to make informed decisions based on accurate model visualizations, while providing a collaborative tool that can be accessed on any platform using a browser window. The tool is also able to point to real time streams to display up-to-the-second data as an experiment is ongoing. This level of latency can also provide operators with essential information that can direct an experiment’s progress. Additionally, this tool can leverage augmented and virtual reality (AR, VR) capabilities of certain mobile devices and head-mounted displays, providing further engaging visualization possibilities.

Pratt, Martin J.↗
NASA NTRS1977

CCD architecture for spacecraft SAR image processing

A real-time synthetic aperture radar (SAR) image processing architecture amenable to future on-board spacecraft applications is currently under development. Using state-of-the-art charge-coupled device (CCD) technology, low cost and power are inherent features. Other characteristics include the ability to reprogram correlation reference functions, correct for range migration, and compensate for antenna beam pointing errors on the spacecraft in real time. The first spaceborne demonstration is scheduled to be flown as an experiment on a 1982 Shuttle imaging radar mission (SIR-B). This paper describes the architecture and implementation characteristics of this initial spaceborne CCD SAR image processor.

Arens, W. E.↗
NASA NTRS1980

An operational software system for geosynchronous satellite navigation

A software system has been designed to provide navigation parameters during the VAS experiment of the GOES-4 mission along with annotation data for near real time image registration. The four functional subsystems of the software system, Data Base Management, Image Processing, Navigation, and Output, and the principal hardware components are characterized. The ability of the system to fulfil its two principal objectives is verified by results obtained from processing actual SMS-2 satellite imagery.

Koch, D. W.↗
NASA NTRS1984

Optical experiments on thermophoretically augmented submicron particle deposition from 'dusty' high temperature gas flows

A real-time laser reflectivity method and Pt ribbon targets are used to obtain experimental data on the initial deposition rate of MgO(s) particles of approximately 700 nm diameter from otherwise clean combustion products as a function of target temperature (about 950-1450 K) and mainstream gas temperature (about 1500-1600 K). These preliminary data are used to demonstrate the dominant role of thermophoresis (particle drift down a temperature gradient) and to assess the utility of recently developed theoretical methods for predicting and correlating the temperature dependence of thermophoretically augmented convective-diffusion 'dust' deposition rates from flowing hot gases.

Rosner, Daniel E.↗
NASA NTRS1990

Applications of ISES for coastal zone studies

In contrast to the discipline- and process-oriented topics addressed, coastal zone studies are defined geographically by the special circumstances inherent in the interface between land and water. The characteristics of coastal zones which make them worthy of separate consideration are: (1) the dynamic nature of natural and anthropogenic processes taking place; (2) the relatively restricted spatial domain of the narrow land/water interface; and (3) the large proportion of the Earth's population living within coastal zones, and the resulting extreme pressure on natural and human resources. These characteristics place special constraints and priorities on remote sensing applications, even though the applications themselves bear close relation to those addressed by other elements of this report (e.g., oceans, ice, vegetation/land use). The discussion which follows first describes the suite of remote sensing activities relevant to coastal zone studies. Potential Information Sciences Experiment System (ISES) experiments will then be addressed within two general categories: applications of real-time data transmission and applications of onboard data acquisition and processing.

Bartlett, D. S.↗
NASA NTRS1990

World-wide interactive access to scientific databases via satellite and terrestrial data network

In order to demonstrate the possibilities for scientific networking and data transfer, a first temporary satellite network link was installed between Czecholovakia and the European space operations center in Darmstadt, during the meeting of the inter-agency consultative group for space science in Prague. Several experiments to show interactive nature of the facility and the capability of the system were carried out, and it was proven that, despite the temporary nature of the installation, the planned demonstrations could be conducted in real time. Demonstrations included electronic mail message, orbit prediction and solar X-ray data. The results of the experiment provided insight into possibilities of data exchange.

Sanderson, T. R.↗
NASA NTRS1991

A digital signal processing system for coherent laser radar

A data processing system for use with continuous-wave lidar is described in terms of its configuration and performance during the second survey mission of NASA'a Global Backscatter Experiment. The system is designed to estimate a complete lidar spectrum in real time, record the data from two lidars, and monitor variables related to the lidar operating environment. The PC-based system includes a transient capture board, a digital-signal processing (DSP) board, and a low-speed data-acquisition board. Both unprocessed and processed lidar spectrum data are monitored in real time, and the results are compared to those of a previous non-DSP-based system. Because the DSP-based system is digital it is slower than the surface-acoustic-wave signal processor and collects 2500 spectra/s. However, the DSP-based system provides complete data sets at two wavelengths from the continuous-wave lidars.

Hampton, Diana M.↗
NASA NTRS1993

Fuel-optimal slewing of an experimental hinged-free beam

With the recent development of numerical methods for exactly solving larger order fuel-optlmal control problems, the implementation of exact real-time fuel-optimal control becomes possible. This paper describes a physical experiment in which a hinged-free beam is slewed in a fuel-optimal manner. A comparison between experimental results and the analytical predictions highlights the sources of errors typical of this class of problems.

Silverberg, Larry↗
NASA NTRS2005

Spatial Extent of a Deep Moonquake Nest: A Preliminary Report of Reexamination

Deep moonquakes, occurring at depths about halfway to the center of the Moon, were discovered during the Apollo lunar landing missions, 1969-1972. Their near-monthly occurrence with nearly identical waveforms at any given seismic station suggests that they are strongly influenced by tides, caused by the Earth and the Sun, acting on certain limited regions of the deep lunar interior. However, much about them is unknown, why they are restricted to certain depths and to limited source regions (nests), and what they tell us about the nature of the material and dynamics of the interior of the Moon. A piece of information helpful to decipher their true nature is the spatial extent and distribution of their hypocenters. The occurrence of nearly identical waveforms suggests groups of hypocenters appear in close proximity to one another, but can we tell how closely they are located and how they are distributed? The Apollo PSE (Passive Seismic Experiment) data from all stations of the seismic network were received in real time at a common receiving station on Earth in digital form. This provided extremely high inter-station timing accuracy not achievable for most earthquake data on Earth at that time. We took advantage of this to compute relative locations of waveform-matched events, and concluded that deep moonquake foci in the A1 moonquake nest were concentrated on a nearly horizontal plane of less than 1 km in diameter. This earlier study was based on deep moonquake events visually identified on seismograms. A recent reanalysis of earlier unidentified seismic events fully utilizing the high capability of present-day computers expanded the list of positively identified deep moonquakes by more than a factor of five. The new list contains many events that are not visually matched in waveforms, yet correlated at a significant level when cross-correlated with a computer. Thus it became imperative to reexamine the spatial distribution of deep moonquake hypocenters including the newly identified events. Additional information is included in the original extended abstract.

Nakamura, Yosio↗
NASA NTRS2017

Novel Estimation of Pilot Performance Characteristics

Two mechanisms internal to the pilot that affect performance during a tracking task are: 1) Pilot equalization (i.e. lead/lag); and 2) Pilot gain (i.e. sensitivity to the error signal). For some applications McRuer's Crossover Model can be used to anticipate what equalization will be employed to control a vehicle's dynamics. McRuer also established approximate time delays associated with different types of equalization - the more cognitive processing that is required due to equalization difficulty, the larger the time delay. However, the Crossover Model does not predict what the pilot gain will be. A nonlinear pilot control technique, observed and coined by the authors as 'amplitude clipping', is shown to improve stability, performance, and reduce workload when employed with vehicle dynamics that require high lead compensation by the pilot. Combining linear and nonlinear methods a novel approach is used to measure the pilot control parameters when amplitude clipping is present, allowing precise measurement in real time of key pilot control parameters. Based on the results of an experiment which was designed to probe workload primary drivers, a method is developed that estimates pilot spare capacity from readily observable measures and is tested for generality using multi-axis flight data. This paper documents the initial steps to developing a novel, simple objective metric for assessing pilot workload and its variation over time across a wide variety of tasks. Additionally, it offers a tangible, easily implementable methodology for anticipating a pilot's operating parameters and workload, and an effective design tool. The model shows promise in being able to precisely predict the actual pilot settings and workload, and observed tolerance of pilot parameter variation over the course of operation. Finally, an approach is proposed for generating Cooper-Harper ratings based on the workload and parameter estimation methodology.

Human pilot models↗
DOE OSTI2023

Machine-Learning-aided Approach for Predicting the Thermal Expansion Behaviors in Advanced Test Reactor Capsules (NURETH-20 full paper)

Instrumented experiments at test reactors are essential to deploying new advanced reactor systems. Designing new experiments and generating data on specific conditions require both time and cost investment. A high-fidelity model of the experiment environment can be created using finite element analysis software to support the actual experiments, but computation time is still a concern in applying outcomes to real-time usage (e.g., a digital twin). This research proposes a machine-learning-aided approach to temperature and displacement predictions, based on the thickness of the outer gas gap on the experimental capsule used for the in-pile demonstration of a novel thermal conductivity probe in the Advanced Test Reactor. The capsule consisted of U10Zr fuel, a rodlet, sodium, and inner and outer capsules. There were gas gaps between the fuel and rodlet and between the inner and outer capsule. The learning data consisted of an experimental capsule’s radial distributions of temperature and displacement, as obtained from Abaqus and the physical features. For the first step, temperature was predicted using three positional parameters. Then the displacement was predicted using six different positional parameters. Each physical feature was normalized to be both nondimensional and standardized. The temperature and displacement predictions showed good agreement in all cases involving interpolation and extrapolation. Also, data similarity enhancement increased the similarity between training and target data increasing the predictive accuracy of machine-learning models. In some cases of extrapolation, the accuracy of the machine-learning model showed limited performance, but still data similarity enhancement improved the accuracy.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

The Transient Reactor Test Facility (TREAT)

TREAT operated from 1959-1994, later refurbished & resumed operation in 2017 to support fuel safety testing Zircaloy-clad graphite/fuel blocks comprise core Virtually any power history possible within ~2000 MJ core transient energy capacity From milliseconds to minutes: Pulses, Ramps, LOCA Fuel motion monitoring system “hodoscope” observes fast neutrons emitted from specimens to track fuel relocation in real time Reactor also can be a neutron source to adjacent radiography facility Experiment vehicle does everything else Safety containment, specimen environment, and instrumentation

22 GENERAL STUDIES OF NUCLEAR REACTORS↗