Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pilot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Flight-test experience in digital control of a remotely piloted vehicle.

The development of a remotely piloted vehicle system consisting of a remote pilot cockpit and a ground-based digital computer coupled to the aircraft through telemetry data links is described. The feedback control laws are implemented in a FORTRAN program. Flight-test experience involving high feedback gain limits for attitude and attitude rate feedback variables, filtering of sampled data, and system operation during intermittent telemetry data link loss is discussed. Comparisons of closed-loop flight tests with analytical calculations, and pilot comments on system operation are included.

Edwards, J. W.↗

Pilot performance with a simulated ILS independence pictorial display

As part of a general investigation of the effectiveness of pictorial displays for manual control and monitoring of aircraft approaches and landings, a simulator study was conducted in which pilot performance with three pictorial displays was evaluated. These displays differed in the type of guidance symbology added to the basic perspective runway display. The effect of decreased resolution and update rate of the runway image on pilot performance was also determined. The results indicate that for pictorial displays with added guidance symbology, there was a marked improvement in pilot performance compared to results of a previous study in which the display consisted of only a runway image and aircraft attitude.

Palmer, E.↗

V/STOL tilt rotor aircraft study. Volume 9: Piloted simulator evaluation of the Boeing Vertol model 222 tilt rotor aircraft

The results of a real time piloted simulation to investigate the handling qualities and performance of a tilting rotor aircraft design are presented. The aerodynamic configuration of the aircraft is described. The procedures for conducting the simulator evaluation are reported. Pilot comments of the aircraft handling qualities under various simulated flight conditions are included. The time histories of selected pilot maneuvers are shown.

Rosenstein, H.↗

Effects of helicopter noise and vibration on pilot performance (as measured in a fixed-base flight simulator)

The effects of noise and vibration on pilot performance are described. Pilot subjects were required to fly VTOL commercial IFR schedules using the computer simulation facilities. The routes flown simulated closely metropolitan routes flown currently by a helicopter airline. The duration of simulator flights ranged from 3 to 8 hours. Subjects were exposed to noise sound pressure levels ranging from 74dB (ambient) to 100dB and 17 Hz vibration stimuli ranging from .1 g to .3 g measured at the floor directly beneath the pilot's seat. Despite subject reports of extreme fatigue in these long flights, performance did not degrade. A curve of performance shows a slow improvement for the first three hours of exposure and a slight loss in performance during the remainder of the flight. As environmental stress conditions (noise, vibration, and time in the simulator) increased, subject performance improved. Within the limits of this study, the higher the stress the better the performance.

Stave, A. M.↗

Design of a flight director/configuration management system for piloted STOL approaches

The design and characteristics of a flight director for V/STOL aircraft are discussed. A configuration management system for piloted STOL approaches is described. The individual components of the overall system designed to reduce pilot workload to an acceptable level during curved, decelerating, and descending STOL approaches are defined. The application of the system to augmentor wing aircraft is analyzed. System performance checks and piloted evaluations were conducted on a flight simulator and the results are summarized.

Hoh, R. H.↗

Apparatus for applying simulator g-forces to an arm of an aircraft simulator pilot

A device to be used with an aircraft simulator to apply positive and negative g forces to the pilot's arm is described. An arm harness fits around the arm which the pilot uses to operate the throttle. The device allows the harness to track intentional arm movements without exerting any restraining forces, and at the same time, applies g forces to to the pilots arm which are recorded by the aircraft simulator computer.

Ashworth, B. R.↗

A study of light airplane pilot landing performance

The results of a total of 289 landings performed with a low-wing aircraft by a group of private pilots on long and short runways have been analyzed to determine the landing performance of these pilots. Both the long- and short-runway landings show significant variation from straight or uniformly curved trajectories, denoting considerable 'jockeying' on the part of the pilot during approach. The long-runway approach speeds were variable and higher than recommended. Considerable float followed by touchdown at speeds well above stall were noted. The short-runway landings were quite similar, except that approach speeds were slightly lower as a result of the use of two-thirds to full flaps, and touchdown occurred closer to the threshold.

Obryan, T. C.↗

An exploratory flight investigation of helicopter sling-load placements using a closed-circuit television as a pilot aid

Helicopter sling load operations have been limited during pick up and delivery of external cargo by the lack of precision achieved by the combination of pilot, helicopter, and sling load. Use of a closed circuit television as a pilot aid during sling load delivery and placement was documented along with additional cases representing procedures currently employed by military and commercial operators. Although an increase in pilot workload was noted when the television system was used, the results indicated a comparable level of performance for each test case.

Dicarlo, D. J.↗

Analysis of longitudinal pilot-induced oscillation tendencies of YF-12 aircraft

Aircraft flight and ground tests and simulator studies were conducted to explore pilot-induced oscillation tendencies. Linear and nonlinear calculations of the integrated flight control system's characteristics were made to analyze and predict the system's performance and stability. The investigations showed that the small-amplitude PIO tendency was caused by the interaction of the pilot with a combination of the aircraft's short-period poles and the structural first bending mode zeros. It was found that the large-amplitude PIO's were triggered by abrupt corrective control actions by the pilot, which caused the stability augmentation system servo to position and rate limit. The saturation in turn caused additional phase lag, further increasing the tendency of the overall system to sustain a PIO.

Smith, J. W.↗

The Out of Service Guest Pilot Evaluation of the Two-segment Noise Abatement Approach in the Boeing B727-200

Guest pilot evaluation results of an approach profile modification for reducing ground level noise under the approach of jet aircraft runways are reported. Evaluation results were used to develop a two segmented landing approach procedure and equipment necessary to obtain pilot, airline, and FAA acceptance of the two segmented flight as a routine way of operating aircraft on approach and landing. Data are given on pilot workload and acceptance of the procedure.

Nylen, W. E.↗

A g-load display for remotely piloted vehicles and other aircraft that are subject to maneuvering constraints

The absence of kinesthetic cues deprives RPV pilots of essential feedback, particularly during high speed maneuvers. A display was designed to facilitate pilot control of g loads and to permit an immediate indication of g-load constraint violations. The display embodies all the motion vector components that contribute to maneuvering accelerations. In one mode of operation, the device displays the components of angular velocity as variable length pointers emanating from the center of a circle whose radius is determined by the linear velocity of the vehicle. An alternative mode of operation permits the pilot to select a display in which g loads are presented directly as variable length pointers emanating from the center of a circle whose radius is again determined by the linear velocity of the vehicle. Each circle defines a safe region of operation, and penetration of the circumference of the appropriate circle by a pointer implies that the structural design load was exceeded.

Howard, J. C.↗

A decision and control multi-axis pilot model based on an urgency for action concept

An all digital multiple axis, multiple input, multiple output pilot model flies five different tasks in aircraft of different classes while encountering turbulence represented by the Dryden spectral model. Six degree of freedom linearized aircraft equations of motion are used together with a generalized stability augmentation system. The pilot model consists of two parts: (1) a decision maker, and (2) a control action implementer. This decision maker selects the critical variable and predicts the error at action implementation. The control action implementer decides the magnitude of control to be applied and applies it. This system has been successfully compared with hybrid/analog man in the loop simulations of the F-5, A-7, T-33, and 707 aircraft, thus validating the all digital simulation and the decision and control pilot model.

Pollard, J. J.↗

Subsonic stability and control derivatives for an unpowered, remotely piloted 3/8-scale F-15 airplane model obtained from flight test

In response to the interest in airplane configuration characteristics at high angles of attack, an unpowered remotely piloted 3/8-scale F-15 airplane model was flight tested. The subsonic stability and control characteristics of this airplane model over an angle of attack range of -20 to 53 deg are documented. The remotely piloted technique for obtaining flight test data was found to provide adequate stability and control derivatives. The remotely piloted technique provided an opportunity to test the aircraft mathematical model in an angle of attack regime not previously examined in flight test. The variation of most of the derivative estimates with angle of attack was found to be consistent, particularly when the data were supplemented by uncertainty levels.

Iliff, K. W.↗

A piloted-simulation evaluation of two electronic display formats for approach and landing

The results of a piloted-simulation evaluation of the benefits of adding runway symbology and track information to a baseline electronic-attitude-director-indicator (EADI) format for the approach-to-landing task were presented. The evaluation was conducted for the baseline format and for the baseline format with the added symbology during 3 deg straight-in approaches with calm, cross-wind, and turbulence conditions. Flight-path performance data and pilot subjective comments were examined with regard to the pilot's tracking performance and mental workload for both display formats. The results show that the addition of a perspective runway image and relative track information to a basic situation-information EADI format improve the tracking performance both laterally and vertically during an approach-to-landing task and that the mental workload required to assess the approach situation was thus reduced as a result of integration of information.

Steinmetz, G. G.↗

Effect of color on pilot performance and transfer functions using a full-spectrum, calligraphic, color display system

The use of blue and red color in out-of-window cockpit displays, in full-spectrum calligraphic computer-generated display systems, is studied with attention given to pilot stereographic depth perception and response to visual cues. Displays for vertical approach, with dynamic and frozen-range landing approach and perspective arrays, are analyzed. Pilot transfer function and the transfer function associated with the contrasted approach and perspective arrays are discussed. Out-of-window blue lights are perceived by pilots as indicating greater distance depth, red lights as indicating proximity. The computer-generated chromatic display was adapted to flight simulators for the tests.

Chase, W. D.↗

The effect of visual-motion time-delays on pilot performance in a simulated pursuit tracking task

An experimental study was made to determine the effect on pilot performance of time delays in the visual and motion feedback loops of a simulated pursuit tracking task. Three major interrelated factors were identified: task difficulty either in the form of airplane handling qualities or target frequency, the amount and type of motion cues, and time delay itself. In general, the greater the task difficulty, the smaller the time delay that could exist without degrading pilot performance. Conversely, the greater the motion fidelity, the greater the time delay that could be tolerated. The effect of motion was, however, pilot dependent.

Miller, G. K., Jr.↗

Individual differences in pilot performance

Selected literature on individual differences in pilot performance is reviewed in order to indicate a possible direction for research. Approaches to studying pilot decision-making processes are discussed, with emphasis given to the wrong-model approach in which accident and incident data, or 'process tracing' provide experimental computational structures. Analysis of data from a simulator experiment on V/STOL zero-visibility landing performance suggests that the order of ranking of individual pilot's effectiveness varies with particular situations defined by combinations of tracking requirements (e.g., glide slope, localizer) and glide-slope segment, or speed requirements; the data are being further analyzed.

Murphy, M. R.↗

Pilot centered requirements in control/display design

A method developed for predicting pilot opinion ratings for particular vehicles and tasks using optimal control pilot model is described and an outline of a flight director design procedure based upon the optimal control pilot model is given. Longitudinal and lateral control of a helicopter in hover and in a -6 deg constant ground speed-command landing approach are considered. Emphasis is placed on display design for optimum V/STOL control.

Hess, R. A.↗