Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “outer planet”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

The design of a source to simulate the gamma-ray spectrum emitted by a radioisotope thermoelectric generator

A simulated source was designed to duplicate the gamma spectrum of a uniform cylindrical 2200-watt Pu02 radioisotope thermoelectric generator containing 81% Pu-238 and 1.2 ppm Pu-236. Gamma rays from the decay of Pu-238, Am-241, Pu-239, and the 0-18(alpha,n)Ne-21 reaction were catalogued in broad energy groups. Two 46- and one 22-mc Th-228 sources provided simulation at various times in the life of the fuel capsule up to 18 years, which covers the time span of an outer planet mission. Emission from Th-228 represents the overwhelming contribution of the gamma spectrum after the first few years. The sources, in the form of 13-inch rods, were placed in a concentric hole in a cylinder of depleted uranium, which provided shielding equivalent to the self-shielding of the fuel capsule. The thickness of the U-238 cylinder (0.55cm) was determined by Monte Carlo calculations to insure that the spectrum emerging from the simulated source matched that of the fuel capsule.

Reier, M.↗
NASA NTRS1972

The program at JPL to investigate the nuclear interaction of RTG's with scientific instruments on deep space probes

A major concern in the integration of a radioisotope thermoelectric generator (RTG) with a spacecraft designed to explore the outer planets is the effect of the emitted radiation on the normal operation of scientific instruments. The necessary techniques and tools developed to allow accurate calculation of the neutron and gamma spectrum emanating from the RTG. The specific sources of radiation were identified and quantified. Monte Carlo techniques are then employed to perform the nuclear transport calculations. The results of these studies are presented. An extensive experimental program was initiated to measure the response of a number of scientific components to the nuclear radiation.

Truscello, V.↗
NASA NTRS1972

Jupiter trapped radiation belts

Previously developed models for trapped electron radiation belts and trapped proton radiation belts in the Jovian magnetosphere are described. The spatial distribution of flux and the L shell dependence of the characteristic energy are displayed for both models. Based on these models, the fluence accumulated by a Jupiter flyby spacecraft is given in terms of the equivalent 3-MeV fluence for electrons and the equivalent 20-MeV proton fluence. Finally, some impacts of these fluences on outer planet missions are described.

Beck, A. J., Jr.↗
NASA NTRS1972

Conclusion

A set of models was established for the Jupiter electron and proton trapped radiation belt which could be used in the determination of outer planets mission spacecraft design requirements. Two models each for the electron and proton components evolved: a nominal or best estimate model, and an upper limit model. The models are described by presenting the assumptions that were agreed to be then best basis for the models at this time, and then describing the models which were structured in the time available. The discussion which took place at the final session is also presented.

Beck, A. J., Jr.↗
NASA NTRS1972

Methods for utilizing maximum power from a solar array

A preliminary study of maximum power utilization methods was performed for an outer planet spacecraft using an ion thruster propulsion system and a solar array as the primary energy source. The problems which arise from operating the array at or near the maximum power point of its 1-V characteristic are discussed. Two closed loop system configurations which use extremum regulators to track the array's maximum power point are presented. Three open loop systems are presented that either: (1) measure the maximum power of each array section and compute the total array power, (2) utilize a reference array to predict the characteristics of the solar array, or (3) utilize impedance measurements to predict the maximum power utilization. The advantages and disadvantages of each system are discussed and recommendations for further development are made.

Decker, D. K.↗
NASA NTRS1972

Orbit improvement from satellite imaging data obtainable from the Mariner/Jupiter/Saturn 1977 missions

Equations of motion are established for a dynamic system in which a spacecraft flies close to and interacts with an outer planet and one or more of its satellites. For the computation of the state and mass partials needed in the orbit corrections, a set of variational equations is derived. These assume a notably compact form through the introduction of a matrix operator D. The above system of differential equations is integrated numerically on a computer.

Aksnes, K.↗
NASA NTRS1972

A portable hydrazine attitude propulsion test system

The portable hydrazine attitude propulsion module is described that was designed and developed to support the attitude control pitch axis simulation tests performed on an air bearing table for the thermoelectric outer planet spacecraft program. The propulsion module was a self-contained, liquid hydrazine propulsion system from which the exhausted gases were generated within the catalyst bed of either of two nominal 0.22-N opposing thrusters. The module, which was designed for convenient assembly onto and removal from an air bearing table, was tested to establish its operational safety. This test history and the very conservative design of the module enabled it to be man-rated for operation in the presence of personnel. The report briefly summarizes the system operations during air bearing table tests, presents a detailed description of the propulsion module hardware, and discussing the system evolution.

Moynihan, P. I.↗
NASA NTRS1971

Some three-body numerical solutions for low-thrust orbiter missions.

A ?velocity at the sphere of influence' method and an asymptotic matching method of patching together two-body low thrust solutions are compared to a number of three-body numerical results for outer planet orbiter missions. The two patching methods compare well with the numerical three-body results and do not depend on any particular choice for the size of the sphere of influence. The results apply, in a strict sense, only to the operational mode used-high-thrust terminal retro into orbit. Low-thrust spirals are not considered in the three-body analysis. The terminal low-thrust phase of thrusting is almost entirely reverse to the velocity vector during the planet centered phase of the trajectory. This may lead to important simplifications for low-thrust guidance and navigation procedures.

Mackay, J. S.↗
NASA NTRS1971

The STAR /self-testing and repairing/ computer - An investigation of the theory and practice of fault-tolerant computer design.

This paper presents the results obtained in a continuing investigation of fault-tolerant computing which is being conducted at the Jet Propulsion Laboratory. Initial studies led to the decision to design and construct an experimental computer with dynamic (standby) redundancy, including replaceable subsystems and a program rollback provision to eliminate transient errors. This system, called the STAR computer, began operation in 1969. The following aspects of the STAR system are described: architecture, reliability analysis, software, automatic maintenance of peripheral systems, and adaptation to serve as the central computer of an outer-planet exploration spacecraft.

A Avizienis↗
NASA NTRS1971

Magnetic tape recorder for long operating life in space.

Magnetic tape recorders have long been used on satellites and spacecraft for onboard storage of large quantities of data. As satellites enter into commercial service, long operating life at high reliability becomes important. Also, the presently planned long-duration space flights to the outer planets require long-life tape recorders. Past satellite tape recorders have achieved a less than satisfactory performance record and the operating life of other spacecraft tape recorders has been relatively short and unpredictable. Most failures have resulted from malfunctions of the mechanical tape transport. Recent advances in electric motors and static memories have allowed the development of a new tape recorder which uses a very simple tape transport with few possible failure modes. It consists only of two brushless dc motors, two tape guides, and the recording heads. Relatively low tape tension, wide torque capability, and precise speed control facilitate design for mechanical reliability to match that of tape-recorder electronics.

Bahm, E. J.↗
NASA NTRS1972

On the writing of programming systems for spacecraft computers.

Consideration of the systems designed to generate programs for the increasingly complex digital computers being used on board unmanned deep-space probes. Such programming systems must accommodate the special-purpose features incorporated in the hardware. The use of higher-level language facilities in the programming system can significantly simplify the task. Computers for Mariner and for the Outer Planets Grand Tour are briefly described, as well as their programming systems. Aspects of the higher level languages are considered.

Mathur, F. P.↗
NASA NTRS1971

A closely regulated TWT converter.

The design concept for the TWT amplifier converter for possible use in the Thermoelectric Outer Planet Spacecraft (TOPS) is presented. An unusual combination of semiconductors and magnetics was utilized to achieve very stable voltage regulation on a number of separate outputs to satisfy the requirements of a high-power TWT, and at the same time operate at an efficiency of better than 90% from a 30-V source. The circuitry consists of an output filter, an auxiliary Jensen oscillator driving a high-reactance transformer to provide current limiting to the heater, a variable time delay, a main Jensen oscillator driving the power transformer with a maximum step-up ratio of 120 to 1, and series transistorized post regulators to provide precise voltage adjustment and low output impedance. This paper discusses the design of the high-reactance transformer and the high step-up ratio transformer, as well as the high-voltage series regulators that are limited in range and operate at the top of the unregulated output voltage. Test data are presented, and details of current transients caused by charging the filter circuits, input current ripple, and output voltage ripples are considered.

Hopper, D. J.↗
NASA NTRS1972

Nuclear Electric Propulsion mission operations.

Mission operations are presented for comet rendezvous and outer planet exploration missions conducted by unmanned Nuclear Electric Propulsion (NEP) system employing in-core thermionic reactors for electric power generation. The selected reference mission are Comet Halley rendezvous and a Jupiter orbiter at 5.9 planet radii, the orbit of the moon Io. Mission operations and options are defined from spacecraft assembly through mission completion. Pre-launch operations and related GSE requirements are identified. Shuttle launch and subsequent injection to earth escape by the Centaur d-1T are discussed, as well as power plant startup and heliocentric mission phases.

Prickett, W. Z.↗
NASA NTRS1972

A common solar electric upper stage for multi-mission applications.

The concept of using a solar-electric upper stage for multi-mission application is practical, economical, and versatile approach to space expMission capabilities include a Mercury orbiter, asteroid and comet rendezvous, a solar probe, and extra-ecliptic probe, and outer planet flybys and orbiters. The 17.5-kw vehicle has an injected mass of 1500 to 2500 kg and carries up to 500 kg of attached or separable payload packages. Mission characteristics, performance tradeoffs and a concepegn configuration are presented, and program plans, cost estimates and advanced technology requirements are identified.

Meissinger, H. F.↗
NASA NTRS1972

SEMMS - Understanding the solar electric multimission concept.

The feasibility of developing a solar electric multimission spacecraft (SEMMS) is examined with emphasis on understanding the effect of solar electric propulsion elements on a spacecraft system design. The applicability of Mariner, Viking, and thermoelectric outer planet spacecraft (TOPS) technologies to postulated mission/science objectives is investigated. A Mariner/Viking-based, modular spacecraft evolves which, with minimum modifications, is capable of performing a variety of interplanetary missions, including comet and asteroid rendezvous and orbit of Mercury, Jupiter, and Saturn. An early technology-evaluation flight is recommended to minimize the risk in subsequent missions.

Irace, W. R.↗
NASA NTRS1972

New horizons in astronomy.

Besides the study of astronomy itself, other topics included cover the geological and biological developments on earth and basic physics of matter, heat, and light. Optical and radio telescopes are discussed, as well as photographic and photoelectric means of detection. The immediate solar system is described by topics on the properties and atmospheres of the inner and outer planets, the sun's energy, sunspots, and the solar spectrum. Stars both on and off the main sequence are discussed in terms of distances, intrinsic properties, lifetimes and evolution. The Milky Way is compared to other galaxies in size, star population and structure, and the different galaxy shapes are pictured. Topics of most recent interest are covered by results of the lunar explorations, new concepts of Mars, and problems of space travel. Problems of modern astronomy include pulsars, neutron stars, and quasars.

Brandt, J. C.↗
NASA NTRS1972

Viewing Phobos and Deimos for navigating Mariner 9.

A new on-board optical navigation data technique has been successfully demonstrated on Mariner 9. Science TV pictures of Phobos and Deimos against star fields were used in the real time navigation process to insert Mariner 9 into orbit about Mars. Real time and post flight evaluation results have shown that the satellite/star data taken by Mariner 9 was more accurate than preflight analysis indicated. In fact the orbital insertion phase of the mission could have been achieved using only optical data to determine encounter parameters. The use of a science TV camera to obtain this data was successfully demonstrated. Stars as dim as 9th magnitude were detected and measurement accuracies of 3 arc sec (1 sigma) were achieved. The success of the optical navigation techniques developed for Mariner 9 has placed a new class of demanding missions (e.g., multiple outer planet, satellite tour, etc) within realized navigation capability.

Duxbury, T. C.↗
NASA NTRS1972

Introduction: Mission Opportunities and Models

NASA's current plans and priorities through the mid-1980s are briefly presented including the fly-thru mission to Comet d'Arrest in 1976, Grand-Tour missions to the outer planets, and the Venus Explorer program.

Sirri, N.↗