Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ocean waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Reduction and coding of synthetic aperture radar data with Fourier transforms

Recently, aboard the Space Radar Laboratory (SRL), the two roles of Fourier Transforms for ocean image synthesis and surface wave analysis have been implemented with a dedicated radar processor to significantly reduce Synthetic Aperture Radar (SAR) ocean data before transmission to the ground. The object was to archive the SAR image spectrum, rather than the SAR image itself, to reduce data volume and capture the essential descriptors of the surface wave field. SAR signal data are usually sampled and coded in the time domain for transmission to the ground where Fourier Transforms are applied both to individual radar pulses and to long sequences of radar pulses to form two-dimensional images. High resolution images of the ocean often contain no striking features and subtle image modulations by wind generated surface waves are only apparent when large ocean regions are studied, with Fourier transforms, to reveal periodic patterns created by wind stress over the surface wave field. Major ocean currents and atmospheric instability in coastal environments are apparent as large scale modulations of SAR imagery. This paper explores the possibility of computing complex Fourier spectrum codes representing SAR images, transmitting the coded spectra to Earth for data archives and creating scenes of surface wave signatures and air-sea interactions via inverse Fourier transformations with ground station processors.

Tilley, David G.↗

Analysis and prediction of ocean swell using instrumented buoys

During the period 20-23 September 1990, the remnants of Supertyphoon Flo moved into the central North Pacific Ocean with sustained wind speeds of 28 m/s. The strong wind and large fetch area associated with this storm generated long-period swell that propagated to the west coast of North America. National Data Buoy Center moored-buoy stations, located in a network that ranged from the Gulf of Alaska to the California Bight, provided wave spectral estimates of the swell from this storm. The greatest dominant wave periods measured were approximately 20-25 s, and significant wave heights measured ranged from 3 to 8 m. Wave spectra from an array of three nondirectional buoys are used to find the source of the long-period swell. Directional wave spectra from a heave-pitch-roll buoy are also used to make an independent estimate of the source of the swell. The ridge-line method, using time-frequency contour plots of wave spectral energy density, is used to determine the time of swell generation, which is used with the appropriate surface pressure analysis to infer the swell generation area. The diagnosed sources of the swell are also compared with nowcasts from the Global Spectral Ocean Wave Model of the Fleet Numerical Oceanography Center. A simple method of predicting the propagation of ocean swell, by applying a simple kinematic model of wave propagation to the estimated point and time source, is demonstrated.

Mettlach, Theodore↗

Magma ocean formation due to giant impacts

The thermal effects of giant impacts are studied by estimating the melt volume generated by the initial shock wave and corresponding magma ocean depths. Additionally, the effects of the planet's initial temperature on the generated melt volume are examined. The shock pressure required to completely melt the material is determined using the Hugoniot curve plotted in pressure-entropy space. Once the melting pressure is known, an impact melting model is used to estimate the radial distance melting occurred from the impact site. The melt region's geometry then determines the associated melt volume. The model is also used to estimate the partial melt volume. Magma ocean depths resulting from both excavated and retained melt are calculated, and the melt fraction not excavated during the formation of the crater is estimated. The fraction of a planet melted by the initial shock wave is also estimated using the model.

Tonks, W. B.↗

Ocean-ice interaction in the marginal ice zone using synthetic aperture radar imagery

Ocean-ice interaction processes in the marginal ice zone (MIZ) by wind, waves, and mesoscale features, such as up/downwelling and eddies are studied using Earth Remote-Sensing Satellite (ERS) 1 synthetic aperture radar (SAR) images and an ocean-ice interaction model. A sequence of seven SAR images of the MIZ in the Chukchi Sea with 3 or 6 days interval are investigated for ice edge advance/retreat. Simultaneous current measurements from the northeast Chukchi Sea, as well as the Barrow wind record, are used to interpret the MIZ dynamics. SAR spectra of waves in ice and ocean waves in the Bering and Chukchi Sea are compared for the study of wave propagation and dominant SAR imaging mechanism. By using the SAR-observed ice edge configuration and wind and wave field in the Chukchi Sea as inputs, a numerical simulation has been performed with the ocean-ice interaction model. After 3 days of wind and wave forcing the resulting ice edge configuration, eddy formation, and flow velocity field are shown to be consistent with SAR observations.

Liu, Antony K.↗

Linear trends in Northern Hemisphere tropospheric geopotential height and temperature patterns

Gridded National Meteorological Center data for 500 mb geopotential height and 300-500 mb and 500-700 mb thickness for the period 1951-1978 are subjected to linear trend analyses. The analyses are carried out for each calendar month. Significant geographical and seasonal distributions of cooling and warming patterns are found. An atmospheric cooling trend over the North Pacific during the winter months is seen in a region where oceanic cooling has also been observed, but planetary-wave adjustments rather than ocean-atmosphere feedback mechanisms appear to be dominant in the atmospheric cooling on climatic time scales. Consistently large temperature trends are also seen over the continent of Asia. Comparisons between thickness trends in the layer 300-500 mb and those in the layer 500-700 mb reveal pronounced patterns of stabilization and destabilization.

Reiter, E. R.↗

Improved Time-Stepping Methods in Global to Regional Ocean Modeling (Annual Status Report 2020)

Time stepping algorithms are an important part of ocean models, and strongly influence both the accuracy of solution and performance. There have been a number of projects investigating various improvements for ocean time-stepping schemes in the Model for Prediction Across Scales-Ocean (MPAS-Ocean), a component of the DOE Energy Exascale Earth System Model. Ocean dynamics include fast surface gravity waves, which are two-dimensional, and slower internal waves, which are three-dimensional, so ocean models use a split time-stepping scheme that separates these barotropic and baroclinic modes for efficiency. MPAS-Ocean runs on variable-resolution horizontal meshes, and must scale to tens of thousands of cores and millions of horizontal gridcells. Ocean models require time stepping algorithms that are customized to these needs, and which are tuned for performance on various resolutions and architectures.

58 GEOSCIENCES↗

Improved Time-Stepping Methods in Global to Regional Ocean Modeling (Annual Status Report)

Time stepping algorithms are an important part of ocean models, and strongly influence both the accuracy of solution and performance. There have been a number of projects investigating various improvements for ocean time-stepping schemes in the Model for Prediction Across Scales-Ocean (MPAS-Ocean), a component of the DOE Energy Exascale Earth System Model. Ocean dynamics include fast surface gravity waves, which are two-dimensional, and slower internal waves, which are three-dimensional, so ocean models use a split time-stepping scheme that separates these barotropic and baroclinic modes for efficiency. MPAS-Ocean runs on variable-resolution horizontal meshes, and must scale to tens of thousands of cores and millions of horizontal gridcells. Ocean models require time stepping algorithms that are customized to these needs, and which are tuned for performance on various resolutions and architectures.

58 GEOSCIENCES↗

Dynamometer Facts

The National Renewable Energy Laboratory's (NREL's) Flatirons Campus features four dynamometers that can perform research validation on wind turbine systems and ocean energy devices. These dynamometers can validate wave and water power systems over capacity ratings ranging from 1 kilowatt (kW) to 5 megawatts (MW) by replacing water with a controllable, electric motor. By combining these capabilities with other tools, such as the controllable grid interface (https://www.nrel.gov/grid/controllable-grid-interface.html), researchers can verify how their device interacts with the grid or integrates with other technologies.

16 TIDAL AND WAVE POWER↗

(abstract) Detection of Mesoscale Oceanic Phenomena in the Southern California Bight via ERS-1 SAR

ERS-1 SAR images are examined with the intent of identifying mesoscale oceanic phenomena in the Southern California Bight (SCB). The SCB is a region of dynamic physical and biological processes, and as such has long been studied. The ERS-1 SAR images are augmented with other remote sensing data, including SIR-C SAR, AVHRR, ERS-1 ATSR, and Space Shuttle hand-held photography. Analysis of these images has revealed a more dynamic mesoscale field than was previously suspected. Eddies with scales on the order of 20-30 km in diameter have been the most common mesoscale features evident, but the presence of oceanic fronts and internal waves, as well as atmospheric internal waves, have been documented as well. The multisensor data record will provide insight as to the underlying ocean and meterological conditions that lead to the prevalence especially of the eddies in this region.

Southern California Bight SCB remote sensing data ↗

Coast-ocean-atmosphere-ocean mesoscale interaction

In the case of cold air outbreaks, the combination of the coastal shape and the sea surface temperature (SST) pattern have a profound effect in establishing a low level mesoscale atmospheric circulation as a result of differential heating due to both variations in overwater path length and the SST. A convergence (or divergence) line then forms along a line exactly downwind of the major bend in the coastline. All this is consistent with the structure of the cloud patterns seen in a high resolution Landsat picture of the cloud streets and the major features are simulated well with a boundary layer model. The dominant convergence line is marked by notably larger clouds. To its east the convective roll clouds grow downstream in accord with the deepening of the boundary layer. To its west (i.e., coastal side) where the induced pressure field forces a strong westerly component in the boundary layer, the wind shear across the inversion gives rise to Kelvin-Helmholtz waves and billow clouds whose orientation is perpendicular to the shear vector and to the major convergence line. The induced mesoscale circulation will feedback on the ocean by intensifying the wind generated ocean wave growth and altering their orientation. Coastal cyclogenesis is due in large part not only to the fluxes of heat and moisture from the ocean, but particularly to the differential heating and moistening of the boundary layer air when the air trajectories pass over a well defined pattern of SST.

Atlas, D.↗

Tsunami Waves Extensively Resurfaced the Shorelines of an Early Martian Ocean

Viking image-based mapping of a widespread deposit covering most of the northern low-lands of Mars led to the proposal by Parker et al. that the deposit represents the vestiges of an enormous ocean that existed approx. 3.4 Ga. Later identified as the Vastitas Borealis Formation, the latest geologic map of Mars identifies this deposit as the Late Hesperian lowland unit (lHl). This deposit is typically bounded by raised lobate margins. In addition, some margins have associated rille channels, which could have been produced sub-aerially by the back-wash of high-energy tsunami waves. Radar-sounding data indicate that the deposit is ice-rich. However, until now, the lack of wave-cut shoreline features and the presence of lobate margins have remained an im-pediment to the acceptance of the paleo-ocean hypothesis.

Vastitas Borealis Formation↗

Measurements of wave height statistics and radar, cross-section in a wind wave tank

There is currently wide interest among oceanographers and meteorologists in remote sensing of ocean surface characteristics. A wind wave tank developed at Langley Research Center is used to evaluate various remote sensing techniques based on electromagnetic scattering phenomena, and in the development and evaluation of theoretical scattering models. The wave tank is described, the statistics of the rough water surface are documented, and microwave radar cross-section measurement results are presented. The water surface statistics are similar in key respects to the open ocean, and the microwave scattering measurements show, qualitatively, theoretically predicted large and small scale scattering effects.

Johnson, J. W.↗

A feasibility assessment for co-locating and powering offshore aquaculture with wave energy in the United States

Offshore aquaculture and marine renewable energy (energy from waves, tides, currents, and ocean gradients) are two developing ocean-based industries. Aquaculture, an industry that has typically relied on diesel for power, is expected to grow globally, presenting an opportunity to reduce greenhouse gas emissions by switching to renewable sources as it expands. As the industry moves further offshore and is situated in more energetic environments, the prospect to co-locate offshore aquaculture with wave energy increases. To improve understanding of this potential, a feasibility assessment was completed to estimate the energy needs and wave resource required to power offshore finfish aquaculture operations. The study found it is possible to power offshore aquaculture operations entirely with wave energy. A spatial analysis was then performed to assess the suitability of co-locating offshore finfish aquaculture and wave energy off California and Hawaii. Suitable locations were identified offshore of O’ahu, Hawaii, and northern California. Southern California was also assessed, using a lower wave resource, based on study areas evaluated by the National Oceanic and Atmospheric Administration to identify Aquaculture Opportunity Areas, and while limited there are suitable locations that may warrant further evaluation. This study presents an analysis into the potential to pair wave energy with offshore aquaculture, and how various factors can help determine suitable areas for co-location. The analyses developed in this study will support future identification of potential sites for development and decision-making to optimize the success of co-locating wave energy resources and offshore finfish aquaculture.

16 TIDAL AND WAVE POWER↗

The 26 December 2004 tsunami source estimated from satellite radar altimetry and seismic waves

The 26 December 2004 Indian Ocean tsunami was the first earthquake tsunami of its magnitude to occur since the advent of both digital seismometry and satellite radar altimetry. Both have independently recorded the event from different physical aspects. The seismic data has then been used to estimate the earthquake fault parameters, and a three-dimensional ocean-general-circulation-model (OGCM) coupled with the fault information has been used to simulate the satellite-observed tsunami waves. Here we show that these two datasets consistently provide the tsunami source using independent methodologies of seismic waveform inversion and ocean modeling. Cross-examining the two independent results confirms that the slip function is the most important condition controlling the tsunami strength, while the geometry and the rupture velocity of the tectonic plane determine the spatial patterns of the tsunami.

ocean general circulation model (OGCM)↗

Seafloor Seismic Noise Patterns Across the Pacific Basin

Seismic hazard monitoring and global tomography efforts are improved by recording signals at a variety of distances and azimuths to maximize subsurface sampling. Although seismic networks provide good to excellent coverage on land, seafloor stations are still sparse. Inclusion of ocean-based data would greatly improve the global coverage of seismic networks, but the use of seafloor seismic data to complement land-based detection and characterization of events is complicated by the generally much higher ambient noise level in the ocean compared to that observed on land. This noise is driven primarily by sea surface waves and tides, but how seismic noise levels vary with location in the oceans is not well described. Here, in this work, we analyze the relationship between ocean surface wave height and seismic noise in the 0.4–4 Hz frequency band at ocean-bottom seismometer deployments across the Pacific basin. We find that a noise-to-responsiveness ratio (NRR)—the median noise level at a station divided by its sea surface wave height responsiveness—correlates negatively with detection success for large teleseismic earthquakes. Stations that are close to land, with relatively shallow ocean and low wind speed, often have lower NRR than open-ocean stations, but the connection between geographic location and earthquake detection success is imperfect.

58 GEOSCIENCES↗

Powering the Blue Economy: A Survey of Station-Keeping Methods for Mooringless Platforms

The term “ocean platform” is used to reference everything from stationary, typically moored, buoys to mobile water vehicles, whether they operate on the ocean’s surface or underwater. For certain applications for which relatively stationary station-keeping conditions are desired, the use of mooring systems is not always a viable alternative either for economic, environmental, regulatory, or otherwise practical reasons, or a combination thereof, (e.g., short deployments, sensitive ecosystems, very deep project sites). Maintaining a platform at a single waypoint or reference location without being moored would require additional control systems and a power source to counteract the drift forces that would naturally displace it. Mobile platforms, which are usually untethered except for remotely operated vehicles, typically require energy input to power their station-keeping capabilities so that they hold or control their location in the ocean. Currently, most of these platforms use combustion engines or batteries for this purpose, which, depending on the specific systems, may be costly, pollute the environment, or create limitations on the length of the deployment. However, powering this kind of platforms with surrounding renewable resources (waves, currents, winds, or sun) has been identified as a promising solution to expand their application. The intent of this report is to investigate station-keeping methods for various ocean platforms that are not moored or otherwise anchored to the ocean floor, or another platform or vessel, paying particular interest to technologies that use marine renewable resources to power their operation, because that is of particular interest to the U.S. Department of Energy’s Powering the Blue Economy (PBE) initiative. As a first step, 72 articles and technical reports related to mooringless station-keeping methods were collected for review. The preliminary literature review provided a broad overview of common themes across the literature from which a descriptive methodology for analyzing various platforms was developed. That is, station-keeping methods were categorized based on their predominant energy source and consumption (renewable, nonrenewable, or hybrid if the platform uses renewable and nonrenewable resources equally), and their localization strategy (drift reduction, “path-planning or “waypoint-holding”). In addition, platform types were segregated into the following groups: buoys, surface drifters, and unoccupied surface vehicles (USVs); offshore renewable energy systems; and unoccupied underwater vehicles (UUVs). The main types of station-keeping methods encountered in this report achieve their intended localization strategy by means of drift mitigation, steering, and/or propulsion. Drift mitigation is commonly accomplished via drogues and sea anchors. Stand-along steering subsystems use control surfaces (e.g., ship rudder, wing sail, etc.) that react to ocean currents, waves, or winds to provide varying-degrees of course adjustments. Combined steering and propulsion subsystems include differential thrusters, directional thrusters separate from a primary thruster that cause the platform to pitch up/down or yaw clockwise/counterclockwise, or vectored thrusters that direct the propulsion in a range of directions relative to the platform’s local coordinate system. Propulsion is often achieved by running a motor and applying active control strategies but can also involve buoyancy shifts and using sails to generate lifting forces that propel a platform in a desired direction. Future research is primarily expected to take place in the form of a technoeconomic analysis that would aim to determine the technological viability, cost, and added value of mooringless station-keeping use cases identified through this research, including docking for UUV recharging or for georeferencing drifter buoys, deep-sea floating wind farms, U.S. Navy sonar arrays, and a Pacific Ocean wave buoy network.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Surface gravity waves at equilibrium with a steady wind

Observations of wave fields' spatial evolution and of gravity wave spectra S(sub omega) are analyzed on the basis of the data reported by several research groups as well as on a 2-year data set of wind and wave measurements by stationary National Oceanic and Atmospheric Administration buoys near the Hawaiian Islands. We seek to clarify the role of the wave energy advection (with the wave group velocity) in the overall energy balance. This advective transfer appears to be no less important than the local (breaking wave induced) dissipation as a factor of wind-wave equilibrium. The advection is found to manifest itself in the shape of wave spectra by reducing the rate at which the spectra density of the wave energy, S(sub omega approximately omega (exp -p), falls off as the frequency increases away from the spectra peak. This and other conclusions are derived by comparing the field observations with theoretical predictions of the weak turbulence theory for a spatially inhomogeneous, statistically stationary, wave field. The observations also indicate that the typical wave age xi = C(sub 0)/U in the open ocean is much greater than the limiting value 1.2 attributed to the 'fully developed sea.' Although the observed spectra can be approximated by a power law with a single 'effective' exponent, this apparent exponent, p, is found to depend on the wave age. At high xi and at frequencies below the generation range, -p tends to -3 rather than the value of -11/3 predicted by the Zakharov-Zaslavskii theory. This deviation is interpreted as pointing to a nonconservative nature of the inverse cascade, the latter including a leakage of energy to low-wavenumber modes. Dependence of the overall effective exponent on xi is shown to be responsible for variation in the coefficients b, B, c, C appearing in empirical fetch laws, such as xi = C bar-x (exp c) and e = B bar-x (exp B), where bar-x and e are the dimensionless fetch and wave energy, respectively.

Glazman, Roman E.↗