Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nitrate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

The adsorption of As(V) on poorly crystalline Fe oxyhydroxides, revisited: Effect of the reaction media and the drying treatment

Arsenic (As) adsorbed on Fe oxyhydroxides (adsorbent) is widely occurring in many environmental settings such as in acid mine drainage systems or in the hydrometallurgical operations to form Fe-As coprecipitates. However, the influence of the reaction media and the drying treatment on the microstructure of the directly formed adsorbents at various pHs was still not fully understood. In this work, As adsorption behaviors on various forms of Fe oxyhydroxides were systematically investigated by using XRD, FTIR, Raman, XANES, and HRTEM. Overall, the results revealed that at weak acidic pH, more As could adsorbed on the suspension adsorbent formed in sulfate and chloride media than that in nitrate media, possibly due to the microstructure alteration of the adsorbent in the presence of sulfate and chloride. Besides, the increasing crystallinity of the Fe oxyhydroxides and the aggregation effect after drying were the major reasons why less As could be hold by the dried adsorbents than that of the corresponding suspension adsorbents. These findings could shed more light on the nature of the Fe oxyhydroxides which may be helpful for more precisely predicting the fate of some toxic metal(loid)s in the environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Impact of oxidation and carbonation on the release rates of iodine, selenium, technetium, and nitrogen from a cementitious waste form

Evaluation of the long-term retention mechanisms and potential release rates for the primary constituents of potential concern (COPCs) (i.e., Tc, I, Se, and nitrate) is necessary to determine if Cast Stone, a radioactive waste form, can meet performance objectives under near-surface disposal scenarios. In this work, a mineral and parameter set accounting for the solubility of I and Se in Cast Stone was developed based on pH-dependent and monolithic diffusion leaching test results, to extend a geochemical speciation model previously developed. The impact of oxidation and carbonation as environmental aging processes on the retention properties of Cast Stone for primary COPCs was systematically estimated. Physically, the effective diffusion coefficients of 4 COPCs in Cast Stone were increased after carbonation and/or oxidation, reflecting an increase in permeability to diffusion. Chemically, i) pH & pe conditions in the original Cast Stone were favorable for the stabilization of Tc, but not for I, Se, and N; ii) oxidation (with/without carbonation) of Cast Stone changed the pe & pH conditions to be detrimental for Tc stabilization; and iii) carbonation (with/without oxidation) of Cast Stone modified the pH & pe conditions to be beneficial for the stabilization of I (in system with Ag added) and Se.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Investigation of the iodate sorption mechanism by CoAl LDH through experiments and ab initio molecular dynamics simulations

Radioiodine released during the nuclear-fuel cycle constitutes a persistent radiological hazard. In this study, the IO 3 – uptake mechanism of CoAl LDH was resolved by combining pH-controlled sorption experiments, synchrotron XAFS, and DFT-based AIMD simulations. At pH close to 6, approximately 90% of IO 3 – was removed, and the equilibrium distribution coefficient reached about 1.7 × 10 4 mL g –1 . EXAFS analysis indicated an average iodine–oxygen bond length of 1.81 Å and a coordination number near 3, with the fit R-factor equal to 0.002. The simulations faithfully reproduced the experimental spectrum and revealed transient proton hopping events that generated metastable I–O–H species inside the interlayer, thereby confirming nitrate-to-iodate exchange as the controlling capture pathway. Atomic density profiles and radial distribution functions further showed that IO 3 – adopt an end-on orientation perpendicular to the hydroxide sheets, while water molecules mediate proton migration without disturbing the host lattice. In conclusion, the integrated experimental–computational evidence demonstrates that CoAl LDH can rapidly and selectively sequester IO 3 – under near-neutral conditions, offering atomic scale guidance for the rational engineering of layered sorbents for advanced radioactive-waste treatment.

Kang, Jaehyuk [Jeju National Univ. (Korea, Republi↗
DOE OSTI2020

Modeling the processes of soil moisture in regulating microbial and carbon-nitrogen cycling

Soil carbon (C) and nitrogen (N) cycles and their complex responses to hydro-climatic forcing have gained increasing attention. While the temperature effects have been intensively studied, soil moisture response functions (SMRFs) are not well documented for various microbial and enzymatic processes due to the difficulties in directly measuring and differentiating the moisture effects on various processes. In this work we extended our C-only Microbial-ENzyme Decomposition (MEND) model to the C-N coupled MEND model with flexible element stoichiometry. Our model calibration showed good agreement between simulated and observed C:N ratios in soil organic matter and microbial biomass, as well as the ammonium and nitrate concentrations. We show that the selection of SMRFs for specific biogeochemical processes could result in significant differences in model simulated microbial and C-N processes. In particular, it is essential to account for the soil moisture effects on microbial dormancy and resuscitation, as the changes in microbial physiology under favorable or stressful conditions will exert strong controls on soil C and N dynamics. We also advocate the utilization of dynamic (time-variant) data (e.g., litter input, N deposition, soil temperature and moisture), instead of time-invariant data, to drive model simulations and analyses. Dynamic forcing data (particularly dynamic soil moisture) better represent the real-world climate and environmental conditions, which could facilitate more realistic modeling and understanding of soil C and nutrient cycling in a changing world.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Glass formulation and lab-scale testing of glasses designed for in-can Melter and in-container Vitrification of high-assay low-enriched uranium aqueous polishing Raffinate waste

Glasses were designed for processing a nuclear waste from aqueous polishing of high-assay low-enriched uranium using either In-Can Melter (ICM) or GeoMelt® In-Container Vitrification™ (ICV) technologies, which operate at temperatures of T p ≤ 1100 °C and T p ≤ 1450 °C, respectively. Due to the different operating conditions, the melt and glass properties were optimized differently for each technology. Each glass was designed to optimize for maximum waste loading while simultaneously satisfying processing (e.g., crystallization, viscosity, and conductivity) and product quality (e.g., durability, hazard characteristic, and crystal content) constraints. Here, the raffinate waste contains high nitric acid (4 M) and low total solids (9 g·L -1 ) concentrations. Feed preparation processes were tested to facilitate concentration and nitrate destruction/removal while controlling redox of the melter feed. A successful feed process including sugar addition and spray-drying was performed to generate an adequate melter feed for ICV processing.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Synthesis of UO 2 nanoparticles via coulometric titration: influence of electrolytes and ligands on synthesized particle properties

Here, this study investigates the controlled synthesis of uranium oxide nanoparticles (UO 2 NPs) via coulometric titration under ambient conditions, focusing on the impact of electrolyte anions, salt concentrations, and strongly complexing ligands on particle formation and properties. Using dilute solutions of mineral acids (HNO 3 , HCl, and HClO 4 ), we demonstrate that the choice of electrolyte anion affects particle size, polydispersity, and surface charge. Particle characterization using dynamic light scattering and transmission electron microscopy shows that particles synthesized in perchlorate are largest and show a high degree of polydispersity. In comparison, particles synthesized in chloride are smaller and more uniform in size. Synthesis in nitrate yields a wide variety of particle sizes, with the major fraction (>65 %) having a smaller size than that obtained in the other two electrolytes. The presence of more strongly coordinating ligands such as sulfate and acetate modulate hydrolysis and condensation reactions, with sulfate suppressing nanoparticle formation across a wide concentration range ([SO 4 2- ] > 5 mM) and acetate enabling stable colloidal suspensions at [HOAc] ≤ 0.1 M. Synthesis in concentrated electrolytes (2 M NaNO 3 , NaCl, or NaClO 4 ) accelerates reaction kinetics but introduces challenges, as particles showed increased polydispersity and aggregation, and were more prone to oxidation. Electrolyte effects on actinide oxide nanoparticle formation are discussed and a short comparison to established nanoparticle syntheses is drawn. This work underscores the importance of tailoring synthesis parameters to achieve desired nanoparticle properties, providing valuable insights for optimizing UO 2 NP production for various applications.

Actinide hydrolysis↗
DOE OSTI2026

Sintering effects on NpO 2 grain size and morphology: The role of precursor Np phase

Neptunium dioxide (NpO 2 ) is a key phase in nuclear material processing as a target material for the production of plutonium-238 ( 238 Pu) and has been historically synthesized via the calcination of a Np oxalate precursor. Alternative synthesis methods for NpO 2 are now more prevalent, necessitating their study and comparison with the more common oxalate route. The purpose of this work was to investigate the microstructural properties of NpO 2 synthesized from a nitrate-based Np precursor phase via the assessment of NpO 2 particle size and morphology as a function of calcination temperature and time. Scanning electron microscopy (SEM) was used to probe the primary grain size and morphology of NpO 2 after calcination at temperatures ranging from 700 to 1100 °C and hold times ranging from 1 to 10 h. Post-image analysis using ImageJ software enabled the quantification of mean particle diameter. This analysis indicated that particle diameter increases with both increasing calcination temperature and hold time. Primary particles were shown to be clumped in irregular patterns into the overall rough, blocky aggregates, but this macroscopic morphology was not affected by calcination time or temperature. Although trends in primary grain size of NpO 2 were consistent with available literature from other Np precursor phases, the macroscopic morphology of the NpO 2 aggregates was quite different than reported for other precursors. Through comparison with historical literature on Np oxalate, this work emphasizes the importance of Np precursor on the physical properties of NpO 2 .

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2026

Influence of aluminum source and Ni/Al ratio in a batch stirred tank reactor on the structure, morphology, and electrochemical performance of Ni-rich NMA cathodes

Here, the structural, morphological, and electrochemical performance of Ni-rich LiNi 0.9 Mn 0.05 Al 0.05 O 2 (955NMA) and LiNi 0.85 Mn 0.05 Al 0.1 O 2 (85,510) cathodes strongly depends on the properties of their hydroxide precursors. Ni-Mn-Al hydroxide precursors were synthesized through controlled co-precipitation in a batch stirred tank reactor, where pH, reaction time, metal-ion feed rate, aluminum source, and aluminum concentration were systematically varied to tailor particle morphology, phase composition, and dopant distribution. Two aluminum sources, aluminum nitrate and sodium aluminate produced two distinct hydroxide precursors NMA(OH) 2 -1 and NMA(OH) 2 -2, which were lithiated to form LiNMA1 (Li 0.992 [Ni 0.905 Mn 0.049 Al 0.046 ]O 2 ) and LiNMA2 (Li 0.990 [Ni 0.850 Mn 0.047 Al 0.103 ]O 2 ). Structural and compositional analyses revealed that aluminum incorporation and phase formation in Ni–Mn–Al hydroxides are governed by local supersaturation and interfacial growth kinetics. Rapid dilute aluminum addition produced aluminum-free β-phase hydroxides, intermediate conditions generated mixed α/β phases, whereas slow concentrated dosing enabled uniform aluminum incorporation and stabilization of the β-phase structure. LiNMA1 delivers a high initial discharge capacity of 223 mAhg −1 but significant capacity fading with 67% retention after 100 cycles, associated with structural instability. In contrast, LiNMA2 delivers a lower initial capacity 172 mAhg −1 yet excellent cycling stability 91% retention, attributed to improved TM–O framework stability and reduced cation disorder.

Capacity↗
DOE OSTI2023

Combustion synthesis of Eu 2 O 3 nanomaterials with tunable phase composition and morphology

Combustion reactions in europium nitrate – acetylacetone – 2-methoxyethanol solutions and gels were investigated to produce europium (III) oxide (Eu 2 O 3 ) nanocrystalline materials and thin films. Thermal analyses of solutions indicated that the 2-methoxyethanol solvent also acts as a fuel in the absence of acetylacetone. Adding acetylacetone increases the overall heat of the reaction. Thermal analysis results revealed that the slow oxidation of unburned hydrocarbon residues follows the primary combustion reaction. Time-temperature profile measurements of the bulk combustion synthesis process in air and nitrogen atmospheres enabled the extraction of the maximum reaction temperature and the heating and cooling rates in the combustion zone. Several direct correlations exist between measured combustion parameters and the phase composition of the products. Combustion in air results in mixed-phase cubic and monoclinic nanocrystalline Eu 2 O 3 . Increasing the acetylacetone concentration in solutions increases the synthesis temperature and decreases the quantity of cubic Eu 2 O 3 . Here, the reaction of solutions in a nitrogen atmosphere or diluted with Eu 2 O 3 provides control of the product phase composition and reduces the quantity of the monoclinic phase. Transmission electron microscopy imaging shows that the Eu 2 O 3 end products are highly porous aggregates of nanocrystalline particles. Electrospraying of reactive solutions onto different substrates followed by short annealing makes the preparation of Eu 2 O 3 materials with diverse morphologies possible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Basin scale distributions of dissolved manganese, nickel, zinc and cadmium in the Mediterranean Sea

Samples for dissolved trace metal concentrations were collected during GEOTRACES expedition GA04-N in summer/spring in the Mediterranean Sea, starting in the Atlantic Ocean and sampling both deep basins of the Mediterranean Sea. Outflow of Mediterranean Outflow Water leads to elevated concentrations of Mn, Ni and Zn in the Atlantic Ocean, but a concentration minimum in the Atlantic distribution of Cd. Nevertheless, when comparing the in- and outflow, the Mediterranean is a net source of Cd to the Atlantic Ocean. Surface concentrations of Mn, Ni, Zn and Cd are elevated in the Mediterranean relative to the Atlantic Ocean where Ni and Cd gradually increased along the eastward surface water flow path, Zn reached a homogenous concentration in the order of 1 to 1.5 nM, and Mn displayed a patchy surface distribution. The observed differences are attributable to the different dynamics of their biogeochemical cycling, notably the partitioning between the dissolved and particulate phases due to biological uptake, scavenging and possibly organic complexation. The elevated surface concentrations of Mn, Ni, Zn and Cd in the Mediterranean are derived from atmospheric deposition, where most likely Zn and Cd are mainly sourced from anthropogenic origin, Mn mostly from lithogenic origin and Ni from both anthropogenic and lithogenic origin. Dissolved Zn and Cd, as well as phosphate and nitrate, display striking inter-basin fractionations with elevated concentrations in the deep water of the western basin compared to the deep eastern basin, without a coinciding increase in the apparent oxygen utilization. Given that physical circulation or contribution from biogenic particulate metals cannot explain the elevated dissolved concentrations, an external non-biological source is required. This source is most likely a vertical flux of metal laden particles dissolving through the water column of the western Mediterranean where these particles, most likely from anthropogenic origin, are derived from either atmospheric deposition or particulate material deposited on the continental shelves that makes its way into the deep basin. Furthermore, to confirm or detect trends in dissolved metal concentrations in the deep basin, regular basin wide assessments of the trace metal distributions in the Mediterranean are needed. The distributions of Mn, Ni, Zn and Cd in the Sea of Marmara illustrate that all of these metals can be affected by anthropogenic surface sources and highlight the different susceptibilities of the dissolved metal distributions to supply from remineralization, and to removal through scavenging. This study provides a first baseline to assess future changes and underlines that the Mediterranean marine environment is susceptible to anthropogenic disturbances, with varying effects for different metals due to differing source strengths and biogeochemical cycles.

58 GEOSCIENCES↗
DOE OSTI2026

Micro-photoluminescence mapping and Chemometrics for the rapid classification of rare earth materials

This article introduces advancements in chemically mapping rare earth materials using photoluminescence (PL) and chemometrics. By leveraging the high sensitivity and selectivity of PL compared to alternative optical techniques, as well as its compatibility with microscopy, we present enhanced capabilities for noninvasive material screening and characterization. Exemplary PL spectra of samarium(III) and europium(III) in oxide, nitrate, and chloride forms demonstrated the ability to extract detailed chemical information of diverse rare earth particles. Additionally, we introduced efficient PL mapping sequences capable of covering a 9 mm diameter carbon tab within minutes, which highlighted the benefits of rapid, large-area imaging. Furthermore, an integrated approach combining PL mapping with principal component analysis and a random forest classifier enabled the resolution of overlapping spectral peaks from different chemistries and provided accurate material classification. In conclusion, these advancements underscored the versatility and robustness of PL for chemically mapping rare earth materials, with the potential to support applications in mining, energy, environmental monitoring, isotope production and beyond.

Chemometrics↗
DOE OSTI2023

Binding of radionuclides and surrogate to 18-crown-6 ether by density functional theory

For this work, we use density functional theory to investigate the interactions of cerium, americium, and curium cations with crown ethers. Our calculations reveal that the modeled structure of cerium integrated within the crown ether is in good agreement with experimental data, with the negative binding energy indicating that capturing the cerium nitrates is thermodynamically favorable. Our results demonstrate that crown ethers can also bind americium and curium, providing insights into the potential applications of crown ether in radionuclide sequestration. Finally, we explore the impact of the skeleton modification of different crown ethers through by substitution of nitrogen atoms in the core of the crown ether for oxygen atoms and find that this structural modification significantly increases the radionuclide binding energies. These findings provide insights on the potential for the use of organic linkers such as crown ethers to address the urgent needs in radionuclide sequestration, separation and sensing.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Striking stability of a mixed-valence thallium(III)-thallium(I) complex in some solvents

At the dissolution of solid anhydrous thallium(III) trifluoromethanesulfonate, Tl(CF 3 SO 3 ) 3 , or thallium(III) trifluoroacetate, Tl(CF 3 COO) 3 , in dimethylsulfoxide (dmso) or N,N,N’,N’-tetramethylurea (tmu), intensely red-colored complexes are formed. This red thallium complex is stable for years in dmso, while it is reduced fairly rapidly to thallium(I) in tmu with a half-life time of an hour. At the dissolution of Tl(CF 3 SO 3 ) 3 in N,N-dimethylpropyleneurea (dmpu) an immediate reduction to thallium(I) takes place. A stable colorless aqueous thallium(III) solution is obtained at the dissolution in acidic water. Stable dmso solutions and solid dmso solvates of thallium(III) perchlorate, nitrate and trifluormethanesulfonate can be prepared by adding dmso to concentrated acidic aqueous thallium(III) solutions. These experimental observations conclude that the pure solids Tl(CF 3 SO 3 ) 3 and Tl(CF 3 COO) 3 play an essential role in the formation of the red-colored thallium complexes. 205 Tl NMR data show that the red thallium complex contains equal amounts of thallium(III) and thallium(I). The structure of the red thallium complex in dmso, as determined by EXAFS, has Tl–O bond distances of 2.216(3) and 2.80(2) Å, which are in very close agreement with the bond distances obtained in the pure dmso solvates of the thallium(III) and thallium(I) ions, respectively, and a Tl···Tl distance of 3.49(1) Å bridged by oxygen atoms. From the EXAFS data it is impossible to distinguish if dmso molecules and/or trifluoromethanesulfonate ions act as bridges. DFT calculations could eliminate some structures due to the irrelevant structural parameters or the energetics of the proposed reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Decomposition of liquid-liquid extraction organic phase structure into critical and pre-peak contributions

Solution nanostructure induced by amphiphile self-association plays an important role in various chemical and physical processes, including liquid-liquid extraction (LLE). Small angle scattering techniques are an essential means of probing this structure, but, due to non-uniqueness of scattering patterns, their interpretation is not trivial. Here, in this study, we decompose small angle x-ray scattering (SAXS) patterns for a range of binary LLE organic phases into two components: Ornstein-Zernike and pre-peak contributions resulting from, respectively, critical concentration fluctuations and packing of the amphiphilic extractant molecules in the nonpolar aliphatic diluent. While we previously applied Ornstein-Zernike scattering models to similar organic phases, including the pre-peak explicitly in the fit allows us to measure weak fluctuations at high extractant concentration and simultaneously obtain information on the position and intensity of the correlation peak related to amphiphile packing. Scattering patterns and partial structure factors calculated from molecular dynamics simulations support this interpretation. We demonstrate how this minimal scattering model describes nanostructuring for a large number of extractant types over their entire extractant/diluent composition ranges, suggesting simple and universal behavior. The straightforward assignment of these structural contributions facilitates the comparison of these features between different classes of extractant molecules and will enable further studies of organic phase aggregation. Applicability to more complex, process-relevant organic phases is illustrated with post-contact organic phases containing significant quantities of extracted lanthanide nitrate salt, which we find are readily described by this model.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Anion-dependent phase behavior of methylimidazolium-based ionic liquids mixed with water: Correlation between local molecular structure and mesoscale behaviors

The mesoscopic phase behavior of decylmethylimidazolium (C 10 mim) ionic liquids (ILs) bearing three monovalent anions—thiocyanate (SCN − ), nitrate (NO 3 − ), and chloride (Cl − )—mixed with water at relatively high IL contents (50–95 wt%) was investigated. Small-angle and wide-angle X-ray scattering (SAXS/WAXS) were employed to follow the evolution of both local and mesoscale structures across this composition range. In the absence of water, C 10 mimSCN and C 10 mimCl behaved as disordered liquids, whereas C 10 mimNO 3 spontaneously formed a hexagonally ordered cylindrical mesophase and displayed a sticky-solid macroscopic appearance. Upon addition of water, C 10 mimSCN remained a viscous liquid and only weakly ordered lamellar domains were observed. This limited ordering is attributed to the lack of hydrogen bonding and weak interaction energy between SCN − anions and C 10 mim + cations. In contrast, the trigonal-planar NO 3 − and point-like Cl − anions promoted the formation of well-defined hexagonal mesophases up to 35–45 wt% water. The formation of hydrogen bonding of the two anions with imidazolium ring protons likely enabled the creation of compact ion clusters that effectively exclude water molecules from the immediate vicinity of the IL aggregates. These findings demonstrate that the interaction energy between ion pairs dictate IL-water interactions and therefore control the transition from disordered liquids to ordered mesophases in IL/water mixtures with high IL contents. In conclusion, the combined SAXS/WAXS analysis reveals a correlation between local intermolecular structure and the emergence of mesoscopic order, providing a systematic framework for tailoring mesoscale structures in alkylimidazolium-based IL/water systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tutorial: Extracting entanglement signatures from neutron spectroscopy

This tutorial is a pedagogical introduction to recent methods of computing quantum spin entanglement witnesses from spectroscopy, with a special focus on neutron scattering on quantum spin systems. We offer a brief introduction to the concepts and equations, define a data analysis protocol, and discuss the interpretation of three entanglement witnesses: one-tangle, two-tangle, and Quantum Fisher Information. We also discuss practical experimental considerations, and give three examples of extracting entanglement witnesses from experimental data: Copper Nitrate, KCuF 3 , and NiPS 3 .

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Absolute Branching Ratios of Prominent $γ$ Rays Following $α$ Decay of 233 U

The absolute $γ$-ray branching ratios (emission probabilities) for 19 prominent peaks in the $α$ decay of 233 U are reported with energies ranging from 97 to 366 keV. The branching ratios were obtained from $α-γ$ coincidence measurements, normalized to the $α$ singles. The high-purity 233 U material (> 99.98%) was separated from its decay products before preparation of a 4.74-mg/cm 2 uranyl nitrate foil with a 6-mm diameter. Furthermore, this is the first report on the absolute normalization of the branching ratios since 1984 and it is the only measure by $α-γ$ coincidences, where the $α-γ/α$ ratio removes several potential systematic biases. Overall, the results are consistent with the adopted literature, and they validate the quantities most relevant to the non-destructive assay of fissile 233 U material, which is relevant to the thorium fuel cycle and associated safeguards.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Combustion-assisted ink-jet printing of nuclear targets

Advances in target fabrication are critical to high-precision measurements in nuclear physics. This work details the preparation of patterned CeO 2 and ThO 2 architectures and thin-film targets via ink-jet deposition of combustible solutions. The produced targets were characterized by scanning electron microscopy (SEM), and by alpha-particle spectroscopy for radioactive targets to determine densities. Ink jet printing of the targets, used both ethanol and 2-methoxyethanol as solvents, with cerium or thorium nitrate as the oxidizer and acetylacetone as the fuel. Additionally, we found that the distance between each droplet dispersion (step size) played the most significant role in determining the final pattern uniformity and thickness. A 50 μm step size leads to relatively thick targets with a density of 350 μg/cm 2 . Significant overlap in droplet sizes leads to a heterogeneous target with an undesirable cracked surface structure. In contrast, 150 μm spacing yields thinner (20 μg/cm 2 ) patterned structures with excellent surface coverage. This method of Ink-jet printing provides a straightforward, scalable, and high-efficiency pathway to prepare custom made, high-quality targets for nuclear physics experiments.

CeO2↗