Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “molecular properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Biogeochemical and Optical Analysis of Coastal DOM for Satellite Retrieval of Terrigenous DOM in the U.S. Middle Atlantic Bight

Estuaries and coastal ocean waters experience a high degree of variability in the composition and concentration of particulate and dissolved organic matter (DOM) as a consequence of riverine/estuarine fluxes of terrigenous DOM, sediments, detritus and nutrients into coastal waters and associated phytoplankton blooms. Our approach integrates biogeochemical measurements (elemental content, molecular analyses), optical properties (absorption) and remote sensing to examine terrestrial DOM contributions into the U.S. Middle Atlantic Bight (MAB). We measured lignin phenol composition, DOC and CDOM absorption within the Chesapeake and Delaware Bay mouths, plumes and adjacent coastal ocean waters to derive empirical relationships between CDOM and biogeochemical measurements for satellite remote sensing application. Lignin ranged from 0.03 to 6.6 ug/L between estuarine and outer shelf waters. Our results demonstrate that satellite-derived CDOM is useful as a tracer of terrigenous DOM in the coastal ocean

Mannino, A.↗
NASA NTRSDate not supplied

Using Polarized PCRTM-Solar Model to Validate EMIT Surface Reflectance L2A Product

Using the vector linearized discrete ordinate radiative transfer model (VLIDORT), a multiple-scattering multi-layer scattering code, coupled with a fast principal component (PC) radiative transfer model (PCRTM), we can simulate hyperspectral radiation fields from visible to shortwave infrared (VSWIR), i.e., 250 nm to 2500 nm. Since only limited accurate line-by-line calculation using VLIDORT is needed, this coupled PCRTM-VLIDORT approach is very efficient for simulating hyperspectral VSWIR spectra. These simulations incorporate accurately defined optical properties (gas absorptions, molecular and aerosol/cloud particle scattering) and detailed surface reflectance inputs. In this study we used the current L2A products of the Earth Surface Mineral Dust Source Investigation (EMIT) imaging spectrometer as the inputs to PCRTM-VLIDORT to simulate EMIT spectra. Comparing the simulated spectra with EMIT measurements provides an efficient method to validate the current EMIT product.

Xiaozhen Xiong↗
DOE OSTI2022

Synthesis and Thermophysical Property Determination of NaCl-PuCl3 Salts

Currently, a knowledge gap exists in the available data and understanding of thermophysical properties relating to fresh fuel salts, especially those containing plutonium. Determination of this data is necessary for the design and construction of test reactors, as well as the licensing of future commercial molten salt reactors. Thermophysical properties such as melting temperature, salt stability, density, and heat capacity were determined on synthesized eutectic NaCl-PuCl3 and a more sodium rich composition containing 25 mol% PuCl3. These measurements document the baseline properties of the salt as a function of temperature for future experiments on irradiated fuel salt which will provide a holistic perspective on the change of thermophysical properties during reactor operations. It was determined that the NaCl-PuCl3 ingot synthesized for this study contained 63.4 mol% NaCl, 36.3 mol% PuCl3, and was 99.7% pure. Upon heating it was shown that the NaCl- PuCl3 eutectic was stable at temperatures of 800°C. The onset of melting occurred at 541°C and the enthalpy of fusion was determined to be 140.7 ± 8.4 J/g. Specific heat capacity measurements showed a slightly decreasing trend with respect to temperature in the liquid phase ranging from 0.67 to 0.57 J/g·K, with an average value of 0.637 ± 0.03 J/g·K (104 ± 5 J/mol·K) between 500 to 720°C. Three independent trials of the molten NaCl-PuCl3 eutectic salt found the density to be ?(T) = 3.8589 – 9.5342·10-4 T(°C), validated between 500 to 800°C. In addition to salt synthesis and experimentally determining thermodynamic properties, Ab Initio molecular dynamic (AIMD) simulations were used to calculate density and heat capacity values.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2001

The Role of Molecular Weight and Temperature on the Elastic and Viscoelastic Properties of a Glassy Thermoplastic Polyimide

Mechanical testing of the elastic and viscoelastic response of an advanced thermoplastic polyimide (LaRC-SI) with known variations in molecular weight was performed over a range of temperatures below the glass transition temperature. The notched tensile strength was shown to be a strong function of both molecular weight and temperature, whereas stiffness was only a strong function of temperature. A critical molecular weight was observed to occur at a weight average molecular weight of M, approx. 22,000 g/mol below which, the notched tensile strength decreases rapidly. This critical molecular weight transition is temperature-independent. Low, molecular weight materials tended to fail in a brittle manner, whereas high molecular weight materials exhibited ductile failure. Furthermore, low molecular weight materials have increased creep compliance and creep compliance rate, and are more sensitive to temperature than the high molecular weight materials. At long timescales (less than 1100 hours) physical aging serves to significantly decrease the creep compliance and creep rate of all the materials tested. Low molecular weight materials are less influenced by the effects of physical aging.

Nicholson, Lee M.↗
DOE OSTI2025

Assessing the Effect of Explicit Polarizability on Models of Carbon Dioxide Solvation in Ionic Liquids

Ionic liquids are an important possible carbon capture material because of their anomalously high sorption selectivity for carbon dioxide over other gases common in air. Many research groups have investigated the molecular origins of this property and provided important insights, including using 1D and 2D-IR spectroscopy. Molecular dynamics simulations have been indispensable to the interpretation of these experiments. In prior molecular dynamics simulation work, charge-scaled force fields have typically been used to provide a mean-field treatment of effects vital to ionic liquid systems such as charge transfer and polarization. Here, we compare models of carbon dioxide solvated in ionic liquids with explicit polarization to models of the same with implicit polarizability through charge-scaling. We calculate structural, dynamical, and spectroscopic properties, and make comparisons to the same items measured in experiment. In this study, we focus on two ionic liquids: 1-butyl-3- methylimidazolium (BMIM + ) paired with bis(trifluoromethane sulfonyl imide) (Tf 2 N − ) and 1-butyl-3-methylimidazolium (BMIM+) paired with hexafluorophosphate (PF 6 − ). We find that many structural, dynamical, and spectroscopic properties are changed when polarization is modeled explicitly. We also find that explicit polarizability softens local ion cages around the carbon dioxide and that the long-time diffusion of the carbon dioxide is gated by the reorganization of the ionic liquid molecules. Comparisons to experiment show modest improvement of many observables compared with experiment for the explicitly polarizable model over the charge-scaled model. Overall, our results show that charge-scaled force fields are likely sufficient to compute spectroscopic properties of carbon dioxide in ionic liquids and suggest some interpretive rules for understanding their structural and dynamical properties. Those using charge-scaled force fields should generally assume that the ion cages around solutes such as carbon dioxide are too stiff and cation-rich in their models and adjust their interpretations and predictions accordingly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1986

Clump 1 - An unusual molecular cloud complex near the Galactic center

The properties of the (C-12)O and (C-13)O emission from Clump I, a complex of molecular clouds which shows the largest noncircular velocities of any molecular material known in the Milky Way, are studied. Observations of the J = 1-0 rotational transitions of the above molecules are reported, and the large-scale distribution and kinematics of the molecular gas in the direction of Clump I are discussed. The small-scale structure is described based on one arcmin resolution of (C-13)O data. Physical properties of the molecular material are derived, and the dynamics of the Clump I clouds are discussed in the context of their stability against Galactic tidal forces. It is concluded that all the clouds in the complex are gravitationally bound, although their outer envelopes may be tidally disrupted by the Galactic potential. The relative motion of the clouds is qualitatively similar to giant molecular cloud complexes in spiral arms of the outer Galactic disk, but the velocities are higher.

Bania, T. M.↗
DOE OSTI2022

A comprehensive study of the radiative properties of NO—a first step toward a complete air opacity

Here, in this paper we propose a methodology to calculate the radiative properties of the diatomic molecular constituents of air, and utilize the present approach to model the radiative properties of nitrogen monoxide, NO. We also investigate the important physics involved in calculating accurate radiative quantities for air, such as the Planck and Rosseland mean opacities, and emission and absorption coefficients, as well as the couplings accounted for in rovibrational calculations. Complete active space self-consistent field multi-reference configuration interaction (CAS-MRCI) calculations were performed in order to model the NO X 2 Π, a 4 Π, b 4 Σ - , 1 2 Σ + , 2 2 Σ + , 3 2 Σ + , G 2 Σ - , B' 2 Δ, (C, B) 2 2 Π, (H', L) 3 2 Π, and 1 2 Φ adiabatic states, and calculate the respective molecular data. The γ X 2 Π - A 2 Σ + , ε X 2 Π - D 2 Σ + , β' X 2 Π - B' 2 Δ, '11 000 Å' A 2 Σ + - D 2 Σ + , 'infrared' X 2 Π - X 2 Π and X 2 Π - (C, B) 2 2 Π (δ and β) band systems are investigated in monochromatic spectra calculations, as well as the Ogawa a 4 Π - b 4 Σ - band and several other band systems. Several conclusions are drawn, such as the importance of including the Ogawa band, which has not been included in previous air radiative models or comprehensive line-list calculations, as well as the importance of performing coupled rovibrational line-list calculations in order to accurately calculate the Rosseland means. We also found that the additional band systems modeled here contribute significantly to the total Planck and Rosseland means.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1984

Computer simulation of surface and film processes

All the investigations which were performed employed in one way or another a computer simulation technique based on atomistic level considerations. In general, three types of simulation methods were used for modeling systems with discrete particles that interact via well defined potential functions: molecular dynamics (a general method for solving the classical equations of motion of a model system); Monte Carlo (the use of Markov chain ensemble averaging technique to model equilibrium properties of a system); and molecular statics (provides properties of a system at T = 0 K). The effects of three-body forces on the vibrational frequencies of triatomic cluster were investigated. The multilayer relaxation phenomena for low index planes of an fcc crystal was analyzed also as a function of the three-body interactions. Various surface properties for Si and SiC system were calculated. Results obtained from static simulation calculations for slip formation were presented. The more elaborate molecular dynamics calculations on the propagation of cracks in two-dimensional systems were outlined.

Tiller, W. A.↗
DOE OSTI2021

Comparison of water nanodroplet properties on different graphite-based substrates

The molecular structure and dynamics of water differ considerably at various interfaces. We compare the interfacial water structure–property relationship on three different carbon substrates, namely, amorphous carbon, compressed expanded natural graphite, and pure graphite by utilizing atomistic molecular dynamics simulations. The effect of different substrates on the structural and dynamical properties of water can readily be observed. Here, the density distributions parallel and normal to the substrates show oblate droplet structures. The normal to the substrate water distribution shows a strong hydration layer at the interface that does not vary with substrates. However, the disparity in the structure and dynamics on three different substrates shows that the surface morphologies of the substrates are critical for determining nanoscale water properties. Furthermore, it is observed that the formation of an interfacial water layer or the hydration layer is a direct consequence of both water “confinement” at the nanoscale and “attraction” between water molecules and the carbon substrates.

42 ENGINEERING↗
NASA NTRS1981

A turbulent origin for the rotation of molecular clouds

The observed rotational properties of dark clouds are shown to be consistent with the turbulent character of the interstellar medium. The turbulent flow is easily maintained by the shearing action of differential galactic rotation. The size distribution of molecular clouds inferred from observations is found to closely resemble a Kolmogorov turbulent spectrum. These findings suggest that the processes leading to the formation and evolution of such clouds may depend strongly on the properties and characteristics of interstellar turbulence.

Fleck, R. C., Jr.↗
NASA NTRS1980

Influence of excess diamine on properties of PMR polyimide resins and composites

This preliminary study explores the influence of 1-10 percent molar excess MDA on the molecular weight distribution and rheological properties of an imidized PMR system. Molecular weight distribution is characterized by gel permeation chromatography of the imidized molding compound; shear viscosity is related to changes in average molecular weight. The thermo-oxidative stability at 600 F glass transition temperature, flexural and interlaminar shear properties of PMR polyimide/Celion 6000 graphite fiber composites are compared as a function of the percent excess MDA in the monomer reactant mixture.

Hurwitz, F. I.↗
DOE OSTI2020

Molecular Dynamics Simulation of the Structures, Dynamics, and Aggregation of Dissolved Organic Matter

Dissolved organic matter (DOM) plays a significant role in the transport and transformation of pollutants in the aquatic environment. However, the experimental characterization of DOM has been limited mainly to bulk properties, and the molecular-level interactions among various components of DOM remain to be fully characterized. In this study, we use molecular dynamics (MD) simulations to probe the structural properties of model DOM systems at atomic detail. The 200 ns simulations, validated by available experimental data, reveal processes and mechanisms by which chemical species (cations, peptides, lipids, lignin, carbohydrates, and some low-molecular-weight aliphatic and aromatic compounds) aggregate to form complex DOM. The DOM aggregates are dynamic, consisting of a hydrophobic core and amphiphilic exterior. The lipid tails and other hydrophobic fragments form the core, with hydrophilic and amphiphilic groups exposed to water, making DOM accessible to both polar and nonpolar species. Thus, the lipid component acts as a nucleator, whereas cations (especially Ca 2+ ) connect the molecular fragments on the surface by coordinating with the O-containing functional groups of DOM. The structural details revealed here provide new insights including surface accessible atoms, overall assemblage, and interactions among the molecules of DOM for understanding the kinetics and mechanisms through which DOM interacts with metal and other contaminants.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2017

Using Advanced Mass Spectrometry Techniques to Fully Characterize Atmospheric Organic Carbon: Current Capabilities and Remaining Gaps

Organic compounds in the atmosphere vary widely in their molecular composition and chemical properties, so no single instrument can reasonably measure the entire range of ambient compounds. Over the past decade, a new generation of in-situ, field-deployable mass spectrometers has dramatically improved our ability to detect, identify, and quantify these organic compounds, but no systematic approach has been developed to assess the extent to which currently available tools capture the entire space of chemical identity and properties that is expected in the atmosphere. Reduced-parameter frameworks that have been developed to describe atmospheric mixtures are exploited here to characterize the range of chemical properties accessed by a suite of instruments. Multiple chemical spaces (e.g. oxidation state of carbon vs. volatility, and oxygen number vs. carbon number) were populated with ions measured by several mass spectrometers, with gas- and particle-phase α-pinene oxidation products serving as the test mixture of organic compounds. Few gaps are observed in the coverage of the parameter spaces by the instruments employed in this work, though the full extent to which comprehensive measurement was achieved is difficult to assess due to uncertainty in the composition of the mixture. Overlaps between individual ions and regions in parameter space were identified, both between gas- and particle-phase measurements, and within each phase. These overlaps were conservatively found to account for little (<10%) of the measured mass. However, challenges in identifying overlaps and in accurately converting molecular formulas into chemical properties (such as volatility or reactivity) highlight a continued need to incorporate structural information into atmospheric measurements.

G. Isaacman-VanWertz↗
DOE OSTI2025

Synthesis and Physical Properties of Manganese Chromium Nitride Thin Films Grown via Molecular Beam Epitaxy

Here, we demonstrate the ability to grow epitaxial thin films of manganese–chromium nitride (Mn x Cr 1–x N) across the entire composition range on magnesium oxide (MgO) (1 0 0) surfaces by molecular beam epitaxy. By independently controlling the ratio of the atomic fluxes of manganese and chromium, the compositional dependence of structural and electrical transport properties is determined. Soft X-ray absorption shows that the valence states of Cr( 3+ ) and Mn( 3+ ) remain identical among these MnCrN epitaxial films. The metallic transport behavior of binary manganese nitride (MnN) and chromium nitride (CrN) is suppressed in the ternary alloys. Changes in room temperature electrical resistivity of up to 100 times and 5 orders of magnitude at cryogenic temperatures are observed. This work expands the variety of nitride compounds available for epitaxial integration and could provide additional flexibility for the development of metal–semiconductor–insulator junctions for spintronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1987

Mass outflows associated with young stellar objects

Properties of optical and molecular outflows associated with young stellar objects are discussed with emphasis placed on new results concerning outflow energetics, collimating structures, and the relationship between the outflow properties and the magnetic field geometry characterizing the host molecular clouds. Particular consideration is given to the IRAS observations of YSO mass outflows, which reveal extended far-IR emission associated with high-velocity molecular gas and in which a number of disk-like structures associated with YSO outflow sources were resolved. The disk axes appeared to lie along the direction of molecular outflows or stellar jets. The mass outflows showed a remarkable tendency to align along the direction of the magnetic fields which thread their host molecular clouds, suggesting that the cloud magnetic field must play an important role in determining the flattening (and perhaps the rotation) of protostellar structures.

Strom, Stephen E.↗
DOE OSTI2022

Microcavity-Modified Emission from Rare-Earth Ion-Based Molecular Complexes

Despite the remarkable optical properties of rare-earth ion materials, their applications as light sources and in quantum technologies are often hindered by their long lifetimes and weak emission. Leveraging the natural compatibility of rare-earth ion molecular complexes with photonic structures, here we modify their photoluminescence properties by coupling them to a flexible open Fabry-Perot cavity. The full in situ tunability of the Fabry-Perot cavity allows fine control over its cavity modes and the achievement of resonant coupling between the rare-earth ion emission and the cavity modes. This configuration allows us to achieve a maximum photoluminescence enhancement factor of 30 and accelerate the decay rate up to two orders of magnitude. Our pump-power-dependent spectroscopic studies of the emitter-cavity system suggest that the cavity-modified emission is primarily caused by amplified spontaneous emission. These results suggest that integrating rare-earth ion molecular complexes with photonic structures could be a viable approach for the effective tuning of their optical properties. This natural compatibility, together with their versatile molecular structures and the resultant electronic states, renders rare-earth ion molecular complexes a potential alternative material platform for lighting and quantum applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Molecular dynamics simulation of the effect of cooling rate on the structure and properties of lithium disilicate glass

The effects of cooling rate on the structure and properties of lithium disilicate (LS2) glass are investigated using molecular dynamics (MD) computer simulations. The evolution of structural features such as pair distribution function, bond angle distribution, and Li coordination distribution are determined, and correlated with dynamic and static properties to elucidate the effects of cooling rate. The density, elastic moduli, and diffusion coefficient are found to be highly sensitive to cooling rate, whereas the Si pair distribution function and bond angle distribution are weakly affected by the cooling rate. Additionally, the changes of Si-O-Si bond angle and Li coordination number suggest the formation of Li cluster at lower cooling rates. Furthermore, by comparing results from other simulations and reported experiments, we confirm that the increase of cooling rate leads to an increase of conductivity and a decrease of density. Finally, at very high cooling rates, we find that all the atoms in LS2-glass do not relax simultaneously, but do so in two distinct configurations.

36 MATERIALS SCIENCE↗