Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “material type”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Structural diversity among multinary pnictide oxides: a minireview focused on semiconducting and superconducting heteroanionic materials

Incorporating different anions with varied ionic sizes and charges is a rapidly growing approach to bring out unusual physical properties among various classes of solid-state materials, pnictides and chalcogenides in particular. This minireview is focused on hetero-anionic materials based on the pnictogens, which have been demonstrated to offer an impressive diversity of crystal chemistry and electronic structures. In addition, many pnictide oxides or oxypnictides, over the course of the last decade, have been shown to exhibit a broad spectrum of superconducting, magnetic, and semiconducting properties. However, the structural diversity of the mixed-anion materials is far greater than the several known structure types, or their variants, of the well-known layered superconductive materials. Therefore, with this treatise, we aim to provide a comprehensive overview of the crystal chemistry of pnictide oxides by recounting almost 40 different structures of such ternary and multinary compounds. In addition to the structural aspects, we also highlight some of the challenges associated with the synthesis, and briefly summarize reported, to date, physical properties of this remarkable class of solids.

crystal structure↗
DOE OSTI2020

Performance of Vehicle Fuel System Elastomers and Plastics with Test Fuels Representing Gasoline Blended with 10% Ethanol (E10) and 16% Isobutanol (iBu16)

The compatibilities of fuel system elastomers and plastics were evaluated for test fuels containing 16 vol.% isobutanol (iBu16) and 10 vol.% ethanol (E10). Elastomers included two fluorocarbons, four acrylonitrile butadiene rubbers (NBRs), and one type of fluorosilicone, neoprene, and epichlorohydrin/ethylene oxide. Plastic materials included four nylon grades, three polyamides, polytetrafluoroethylene (PTFE), polyvinylidene fluoride (PVDF), ethylene tetrafluoroethylene (ETFE), polyphenylene sulfide (PPS), high-density polyethylene (HDPE), polybutylene terephthalate (PBT), polyoxymethylene (POM), flexible polyvinylchloride (PVC), polyetherimide (PEI), polyetheretherketone (PEEK), and a phenol formaldehyde reinforced with glass fiber (GFPF). For each polymer material, the volume, mass, and hardness were measured before and after drying. Dynamic mechanical analysis (DMA) measurements were also performed on the dried specimens.For the elastomer materials the measured properties were similar for both fuels. The fluorocarbons and fluorosilicone swelled the least (~20%), while more moderate (20-45%) expansion occurred for the two NBR hose grades and (ECO). HNBR, neoprene, and silicone exhibited high swelling and softening, which likely precludes their use in many fuel systems. For the plastic materials, the observed swell was low; Nylon 11 swelled around 15%, but otherwise, their measured swell was <10%. Many of the plastics also showed sensitivity to alcohol type, as the E10 test fuel often imparted appreciably higher swell than iBu16. In general, the plastic materials showed good compatibility with the iBu16 and E10 test fuels. Here, the sole exception was the PVC material, which was structurally degraded from exposure to either fuel type. Compositional analysis showed high fuel retention in Nylon 12 and PVC. PVC also experienced a significant reduction in plasticizer compounds following exposure, which resulted in embrittlement and an increase in the glass-to-rubber transition temperature.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

Measurements of emanation of Ar-37 and Ar-39 from irradiated rocks and powders

The emanation fraction of radionuclides has been highlighted as a known source of uncertainty in the estimation of radionuclide source signatures from underground nuclear tests and other nuclear activities, particularly in the case of activation products. A system was developed at Pacific Northwest National Laboratory to quantify the emanation fraction of argon from samples ranging in particle size from powder to small rocks. Seven materials, two powders and five rock types, were irradiated with fission spectrum neutrons and the emanation fraction of 37 Ar was measured. Additional measurements were made of the 39 Ar emanation for four of these materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Designing Magnetism in High Entropy Oxides

Abstract In magnetic systems, spin and exchange disorder can provide access to quantum criticality, frustration, and spin dynamics, but broad tunability of these responses and a deeper understanding of strong limit disorder are lacking. Here, it is demonstrated that high entropy oxides present a previously unexplored route to designing materials in which the presence of strong local compositional disorder may be exploited to generate tunable magnetic behaviors—from macroscopically ordered states to frustration‐driven dynamic spin interactions. Single‐crystal La(Cr 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 )O 3 films are used as a model system hosting a magnetic sublattice with a high degree of microstate disorder in the form of site‐to‐site spin and exchange type inhomogeneity. A classical Heisenberg model simplified to represent the highest probability microstates well describes how compositionally disordered systems can paradoxically host magnetic uniformity and demonstrates a path toward continuous control over ordering types and critical temperatures. Model‐predicted materials are synthesized and found to possess an incipient quantum critical point when magnetic ordering types are designed to be in direct competition, this leads to highly controllable exchange bias behaviors previously accessible only in intentionally designed bilayer heterojunctions.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Understanding Depolymerization and Repolymerization Toward Repurposing Polymer Waste Into Valuable Chemicals & Materials

The versatility of synthetic polymers has led to their continual and escalating production that has accompanied mismanagement at their end-of-life. Exploring and understanding complementary avenues to repurpose plastic waste beyond traditional mechanical recycling can unlock new opportunities in providing feedstock flexibility, securing supply chains, recovering valuable materials, and enabling new valorization paths. Chemical recycling allows for the return to monomers, tailored oligomers, and polymers, even from mixed states of post-consumer waste plastics. This review article summarizes our research team's efforts on elucidating key insights surrounding plastic depolymerization and repolymerization into valorized products. We revealed organocatalyst design rules lead to highly effective and selective deconstruction of condensation polymers. The intricacies of tailoring the reaction environment to produce products of specific lengths and desired functionalities transform low-value waste feedstocks into high-performance materials with embedded circularity. Other types of polymers, including polyolefins and polyakenamers, have also been designed and converted into valuable products. There remain opportunities for further developments such as low-energy and precision depolymerization, adoption of cutting-edge small molecule transformation to access functionalized polymer scaffolds typically inaccessible otherwise, as well as precision design and understanding through the aid of advanced tools.

Galan, Nick [ORNL]↗
DOE OSTI2021

Sculpting the Plasmonic Responses of Nanoparticles by Directed Electron Beam Irradiation

Spatial confinement of matter in functional nanostructures has propelled these systems to the forefront of nanoscience, both as a playground for exotic physics and quantum phenomena and in multiple applications including plasmonics, optoelectronics, and sensing. In parallel, the emergence of monochromated electron energy loss spectroscopy (EELS) has enabled exploration of local nanoplasmonic functionalities within single nanoparticles and the collective response of nanoparticle assemblies, providing deep insight into associated mechanisms. However, modern synthesis processes for plasmonic nanostructures are often limited in the types of accessible geometry, and materials and are limited to spatial precisions on the order of tens of nm, precluding the direct exploration of critical aspects of the structure-property relationships. Here, the atomic-sized probe of the scanning transmission electron microscope is used to perform precise sculpting and design nanoparticle configurations. Using low-loss EELS, dynamic analyses of the evolution of the plasmonic response are provided. It is shown that within self-assembled systems of nanoparticles, individual nanoparticles can be selectively removed, reshaped, or patterned with nanometer-level resolution, effectively modifying the plasmonic response in both space and energy. This process significantly increases the scope for design possibilities and presents opportunities for unique structure development, which are ultimately the key for nanophotonic design.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Uncovering metallic glasses hidden vacancy-like motifs using machine learning

Vacancies are a ubiquitous type of defect in crystalline materials that can affect their properties and behavior, including atomic diffusivity, deformation processes, thermal conductivity, and electrical conductivity. While well-defined in crystals, it is challenging to identify such topological footprints in the amorphous structure of metallic glasses (MGs). Here, we uncover an unforeseen vacancy-like structural motif named Q7, which refers to an atomic Voronoi polyhedron with seven quadrangular faces, by investigating MG local atomic configurations with the help of machine learning. The Q7 motif exhibits characteristics similar to crystalline vacancies and plays a significant role in short-range structural disorder in MGs. The atoms at the center of the Q7 motif display larger local entropy, atomic volume, and local tension. Additionally, its concentration follows an Arrhenius-like relationship with temperature, accurately indicating the glass transition temperature, and is strongly correlated with the yield and failure of MGs during mechanical deformation. The discovery of the Q7 motif provides new insights into understanding the intricate relationship between local disorder and structural relaxation in MGs, offering a remarkable ability to predict their thermal and mechanical behavior. This potentially paves the way for enhancements in the design and manufacturing processes of MGs and other amorphous materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Structural, Vibrational, and Electronic Properties of 1D-TlInTe 2 under High Pressure: A Combined Experimental and Theoretical Study

Analogous to 2D layered transition-metal dichalcogenides, the TlSe family of quasi-one dimensional chain materials with the Zintl-type structure exhibits novel phenomena under high pressure. In the present work, we have systematically investigated the high-pressure behavior of TlInTe 2 using Raman spectroscopy, synchrotron X-ray diffraction (XRD), and transport measurements, in combination with first principles crystal structure prediction (CSP) based on evolutionary approach. We found that TlInTe2 undergoes a pressure-induced semiconductor-to-semimetal transition at 4 GPa, followed by a superconducting transition at 5.7 GPa (with T c = 3.8 K). An unusual giant phonon mode (A g ) softening appears at ~10–12 GPa as a result of the interaction of optical phonons with the conduction electrons. The high-pressure XRD and Raman spectroscopy studies reveal that there is no structural phase transitions observed up to the maximum pressure achieved (33.5 GPa), which is in agreement with our CSP calculations. In addition, our calculations predict two high-pressure phases above 35 GPa following the phase transition sequence as I4/mcm (B37) → Pbcm → Pm$\bar{3}$m (B2). Electronic structure calculations suggest Lifshitz (L1 & L2-type) transitions near the superconducting transition pressure. Furthermore, our findings on TlInTe 2 open up a new avenue to study unexplored high-pressure novel phenomena in TlSe family induced by Lifshitz transition (electronic driven), giant phonon softening, and electron–phonon coupling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Two Ligands of Interest in Recovering Uranium from the Oceans: The Correct Formation Constants of the Uranyl(VI) Cation with 2,2'-Bipyridyl-6,6'-dicarboxylic Acid and 1,10-Phenanthroline-2,9-dicarboxylic Acid

The ligands BDA (2,2'-bipyridyl-6,6'-dicarboxylic acid) and PDA (1,10-phenanthroline-2,9-dicarboxylic acid) are of interest as functional group types for ion-exchange materials for extracting uranium from the oceans, reported in a previous paper for PDA Lashley, M. A. ( Inorg. Chem. 2016 55 10818 10829). Yang, Y. ( Inorg. Chem. 2019, 58, 6064 6074) have published what they claim to be a more accurate result for the formation of the UO 2 2+ /PDA complex of log K 1 = 22.84 compared with our reported value of log K 1 = 16.5, as well as log K 1 = 21.52 for the BDA complex. The determination of log K 1 for the PDA and BDA complexes with the UO 2 2+ cation was carried out by Yang et al. using a competition reaction between DTPA (diethylenetriamine pentaacetic acid) and BDA or PDA, monitoring the absorbance due to the BDA and PDA ligands. This competition method using absorbance versus pH titrations was developed for determining the formation constants of the complexes of several polypyridyl ligands plus PDA complexes of metal ions, which were too stable for log K determination by competition with protons. A key feature of such titrations is that in the competition reaction, the displacement of the pyridyl donor ligand (e.g., PDA) by the competing ligand (e.g., DTPA), the absorbance spectrum of the displaced pyridyl donor ligand should be observed. Competing ligands used to date have been EDTA (ethylenediamine tetraacetic acid), DTPA, or the hydroxide ion. In the study of Yang et al., no such displaced PDA or BDA was apparent in the absorbance spectra in their titrations so that their reported log K 1 values have no validity. Their log K 1 values are so much higher than log K 1 for the uranyl DTPA complex (~13.6) that DTPA could not possibly displace BDA or PDA from the uranyl cation, and a competition reaction could not possibly occur. Here, we report the correct value of log K 1 = 15.4 (ionic strength = zero) for the uranyl BDA complex, to illustrate the correct determination of such a constant by a competition reaction between BDA and hydroxide, showing how the characteristic absorbance spectrum for a BDA complex, here the UO 2 2+ complex, disappears, and the distinctive absorbance spectrum of the free nonprotonated BDA ligand appears as the pH is increased, and BDA is displaced by the hydroxide ion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Infrared Imaging Using Thermally Stable HgTe/CdS Nanocrystals

Transferring nanocrystals (NCs) from the laboratory environment toward practical applications has raised new challenges. HgTe appears as the most spectrally tunable infrared colloidal platform. Its low-temperature synthesis reduces the growth energy cost yet also favors sintering. Once coupled to a read-out circuit, the Joule effect aggregates the particles, leading to a poorly defined optical edge and large dark current. Here, in this study, we demonstrate that CdS shells bring the expected thermal stability (no redshift upon annealing, reduced tendency to form amalgams, and preservation of photoconduction after an atomic layer deposition process). The electronic structure of these confined particles is unveiled using k.p self-consistent simulations showing a significant exciton binding energy of ~ 200 meV. After shelling, the material displays a p-type behavior that favors the generation of photoconductive gain. The latter is then used to increase the external quantum efficiency of an infrared imager, which now reaches 40% while presenting long-term stability.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

A 3D Full Stress Tensor Model for Oklahoma

Abstract The stress tensor is an important property for upper crustal studies such as those that involve pore fluids and earthquake hazards. At tectonic plate scale, plate boundary forces and mantle convection are the primary drivers of the stress field. In many local settings (10–100 s of km and <10 km depth) in tectonic plate interiors, we can simplify by assuming a constant background stress field that is perturbed by local heterogeneity in density and elasticity. Local stress orientation and sometimes magnitude can be estimated from earthquake and borehole‐based observations when available. Modeling of the local stress field often involves interpolating sparse observations. We present a new method to estimate the 3D stress field in the upper crust and demonstrate it for Oklahoma. We created a 3D material model by inverting multiple types of geophysical observations simultaneously. Integrating surface‐wave dispersion, local travel times and gravity observations produces a model of P‐wave velocity, S‐wave velocity, and density. The stress field can then be modeled using finite element simulations. The simulations are performed using our simplified view of the local stress field as the sum of a constant background stress field that is perturbed by local density and elasticity heterogeneity and gravitational body forces. An orientation of N82°E, for the maximum compressive tectonic force, best agrees with previously observed stress orientations and faulting types in Oklahoma. The gravitational contribution of the horizontal stress field has a magnitude comparable to the tectonic contribution for the upper 5 km of the subsurface.

58 GEOSCIENCES↗
DOE OSTI2024

Coherent photoexcitation of entangled triplet pair states

The functional properties of organic semiconductors are defined by the interplay between optically bright and dark states. Organic devices require rapid conversion between these bright and dark manifolds for maximum efficiency, and one way to achieve this is through multiexciton generation (S 1 → 1 TT). Here, the dark state 1 TT is typically generated from bright S 1 after optical excitation; however, the mechanistic details are hotly debated. Here we report a 1 TT generation pathway in which it can be coherently photoexcited, without any involvement of bright S 1 . Using <10-fs transient absorption spectroscopy and pumping sub-resonantly, 1 TT is directly generated from the ground state. Applying this method to a range of pentacene dimers and thin films of various aggregation types, we determine the critical material properties that enable this forbidden pathway. Through a strikingly simple technique, this result opens the door for new mechanistic insights into 1 TT and other dark states in organic materials.

14 SOLAR ENERGY↗
DOE OSTI2023

A Dive into Underwater Solar Cells

Our oceans are vast, mostly unexplored and difficult to monitor. Large-scale implementation of a fully autonomous 'Internet of Underwater Things' would transform how we collect and share data from this domain; however, deployment is prohibited by the lack of persistent power sources. In principle, underwater solar-energy generation can complement the use of batteries and provide a solution, although dedicated research is needed since traditional silicon solar cells do not perform well underwater due to water's strong absorption of near-infrared light. In this Perspective we present examples of solar-powered underwater applications and discuss which types of solar-harvesting materials could be appropriate, including GaInP variants, CdTe, organic semiconductors, and perovskite semiconductors. We also discuss challenges that need to be addressed, such as the development of effective antifouling coatings and new certification standards given that underwater conditions are starkly different from those in terrestrial environments.

antifouling coatings↗
DOE OSTI2021

Broadening the scope of high structural dimensionality nanomaterials using pyridine-based curcuminoids

We present a new heteroditopic ligand (3pyCCMoid) that contains the typical skeleton of a curcuminoid (CCMoid) decorated with two 3-pyridyl groups. The coordination of 3pyCCMoid with ZnII centres results in a set of novel coordination polymers (CPs) that display different architectures and dimensionalities (from 1D to 3D). Our work analyses how synthetic methods and slight changes in the reaction conditions affect the formation of the final materials. Great efforts have been devoted toward understanding the coordination entities that provide high dimensional systems, with emphasis on the characterization of 2D materials, including analyses of different types of substrates, stability and exfoliation in water. Here, we foresee the great use of CCMoids in the field of CPs and emphasize 3pyCCMoid as a new-born linker.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A new model for the effective thermal conductivity of polycrystalline solids

We introduce a novel model for the effective thermal conductivity of polycrystalline solids based on the thin-interface description of grain boundaries (GBs). In contrast to existing models, our new model treats a GB as an autonomous “phase” with its own thermal conductivity. The Kapitza resistance/conductance of a thin interface is then derived in terms of the interface thermal conductivity and width. In turn, the effective thermal conductivity of polycrystals is derived in terms of grain size, grain and GB conductivities, and GB width. This treatment allows the model to simulate the change of the Kapitza resistance/conductance with segregation/doping, GB structure/phase transition, or GB decohesion. Moreover, since the model assumes a finite width for GBs, it is expected to give better predictions than its sharp-interface-based counterparts for nanoscale grains. The predictions of the new model deviate from the corresponding ones from existing models by 1%–100% as the grain size approaches the GB width. High-fidelity finite-element simulations were conducted to validate the predictions of the new model. These simulations proved the higher accuracy of the new model. We also discuss how to generalize this treatment to other types of interfaces in heterogeneous materials. The advantages and limitations of the new model are summarized, and some future directions are highlighted.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Observations on the fourth-power scaling of high-pressure shock waves in solids

This paper is concerned with the bounds and approximations that are found in the original derivation of the fourth-power scaling of shock waves in solids [D. Grady, Appl. Phys. Lett. 38, 825 (1981)]. The analysis is focused on the framework of the derivation and is independent of constitutive assumption, such as visco-plastic behavior. Results include an upper bound for the shock pressure and a restriction on the range of power coefficient for materials having a power-type function for the shock velocity–particle velocity relation. Relaxation of this restriction is proposed based on the idea that the rise time along the Rayleigh line is strain dependent. The idea led to the application of the Onsager relation to strain rate calculation that in turn resulted in a quadratic function for the strain rate–shock pressure relation. The fourth-power relation is obtained by generalizing the Onsager relation through the introduction of a quadratic dissipative potential in analogy to Rayleigh's dissipative potential.

Horie, Yasuyuki (ORCID:0000000245207246)↗
DOE OSTI2024

FLARE: field line analysis and reconstruction for 3D boundary plasma modeling

The FLARE code is a magnetic mesh generator that is integrated within a suite of tools for the analysis of the magnetic geometry in toroidal fusion devices. A magnetic mesh is constructed from field line segments and permits fast reconstruction of field lines in 3D boundary plasma codes such as EMC3-EIRENE. Both intrinsically non-axisymmetric configurations (stellarators) and those with symmetry breaking perturbations of an axisymmetric equilibrium (tokamaks) are supported. The code itself is written in Modern Fortran with MPI support for parallel computing, and it incorporates object-oriented programming for the definition of the magnetic field and the material surface geometry. Extended derived types for a number of different magnetohydrodynamic equilibrium and plasma response models are implemented. The core element of FLARE is a field line tracer with adaptive step-size control, and this is integrated into tools for the construction of Poincaré maps and invariant manifolds of X-points. A collection of high-level procedures that generate output files for visualization is build on top of that. The analysis modules are build with Python frontends that facilitate customization of tasks and/or scripting of parameter scans.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

The updated ITPA global H-mode confinement database: description and analysis

The multi-machine ITPA Global H-mode Confinement Database has been upgraded with new data from JET with the ITER-like wall and ASDEX Upgrade with the full tungsten wall. This paper describes the new database and presents results of regression analysis to estimate the global energy confinement scaling in H-mode plasmas using a standard power law. Various subsets of the database are considered, focusing on type of wall and divertor materials, confinement regime (all H-modes, ELMy H or ELM-free) and ITER-like constraints. Apart from ordinary least squares, two other, robust regression techniques are applied, which take into account uncertainty on all variables. Regression on data from individual devices shows that, generally, the confinement dependence on density and the power degradation are weakest in the fully metallic devices. Using the multi-machine scalings, predictions are made of the confinement time in a standard ELMy H-mode scenario in ITER. The uncertainty on the scaling parameters is discussed with a view to practically useful error bars on the parameters and predictions. One of the derived scalings for ELMy H-modes on an ITER-like subset is studied in particular and compared to the IPB98(y,2) confinement scaling in engineering and dimensionless form. Transformation of this new scaling from engineering variables to dimensionless quantities is shown to result in large error bars on the dimensionless scaling. Regression analysis in the space of dimensionless variables is therefore proposed as an alternative, yielding acceptable estimates for the dimensionless scaling. The new scaling, which is dimensionally correct within the uncertainties, suggests that some dependencies of confinement in the multi- machine database can be reconciled with parameter scans in individual devices. This includes vanishingly small dependence of confinement on line-averaged density and normalized plasma pressure (β), as well as a noticeable, positive dependence on effective atomic mass and plasma triangularity. Extrapolation of this scaling to ITER yields a somewhat lower confinement time compared to the IPB98(y, 2) prediction, possibly related to the considerably weaker dependence on major radius in the new scaling (slightly above linear). Further studies are needed to compare more flexible regression models with the power law used here. In addition, data from more devices concerning possible ‘hidden variables’ could help to determine their influence on confinement, while adding data in sparsely populated areas of the parameter space may contribute to further disentangling some of the global confinement dependencies in tokamak plasmas.

Database↗