Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “local distortion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Effects of sub‐mm cylindrical voids on detonation performance in PBX 9501

Abstract Internal features of varying scale and geometry are always present in explosives systems. Below a critical length, dependent on the explosive, these features can operate as a driving force for energy concentration and reaction, known as hotspots. At larger length scales, internal features result in jetting and detonation wave shaping, allowing for bulk work to be done by the explosive as is seen in shape charges. To date, a large volume of work has been performed to simulate hotspot ignition and large‐scale wave shaping. However, little experimental data exists on the effects of features in intermediate length scales, 0.1 to 1 millimeter. It has been observed in many tests that these small‐scale features can influence the high explosive (HE) performance and in some cases cause substantial damage to adjacent systems. This work provides quantitative data on the effects of machined voids moderately above more typical hotspot lengths, 0.3–0.8 mm in diameter, in PBX 9501 pressed to 1.785 g cm −3 ±2.5 mg cm −3 . Streak imaging was used to visualize void collapse, jet velocity, re‐initiation time, and wave shape evolution. Delay in detonation front propagation time was found to be linearly dependent on the void diameter and jet velocity was found to be independent within the tested range and resolution. Cut‐back experiments were used to investigate wave shape distortion and evolution downstream of the void, showing consistent growth and decay shapes across all void sizes. Simulations using CTH, a hydrocode by Sandia National Laboratory, were used to investigate void collapse showing agreement with the trends of experimental results but yielded inaccurate wave shape development delay values. Both simulation and experimental results identified several re‐initiation mechanisms with jetting and subsequent double shocking of localized HE being the dominant mechanisms for the void sizes that were studied.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2021

W7-X and the sawtooth instability: towards realistic simulations of current-driven magnetic reconnection

Magnetic reconnection in W7-X is studied by means of global numerical simulations in a series of models of increasing complexity. The magnetic geometry ranges from that of a cylinder to the full three-dimensional field of W7-X, and the equations solved range from ideal magnetohydrodynamics (MHD) to gyrokinetics. We simulate plasmas from the first operation phase with electron cyclotron current drive (ECCD). These are characterized by an equilibrium magnetic field featuring an ECCD-distorted 'humped' profile of the rotational transform ι, with ι = 1 in two radial locations. Such plasmas generally show sawtooth activity, hence motivating the present study. We pay particular attention to the role of equilibrium current density gradients in the destabilization of reconnecting modes. When the equilibrium temperature and density gradients are artificially suppressed (to eliminate the pressure gradient drive), the perturbed electrostatic potential is radially localized between the locations at which ι = 1. This is shown with a purely collisionless gyrokinetic model, in cylindrical geometry. In the real toroidal geometry of W7-X, for a non-ideal MHD model including a uniform resistivity, electron inertia and (numerical) viscosity, the same qualitative behaviour is observed. In particular, even if a resonant (m, n) = (1, -1) perturbation is initialized, the most unstable mode is the (m, n) = (-4, 4), where m and n are the poloidal and toroidal mode numbers, respectively. Other modes are destabilized due to geometric coupling. The growth rate of this instability scales as η 1/3 , where η is the plasma resistivity, thus suggesting that ECCD drives ideal MHD stable W7-X plasmas towards non-ideal marginality. An ideal magnetohydrodynamic analysis confirms the result. A fluid-kinetic hybrid version of the EUTERPE code shows that gyrokinetic ions have a stabilizing effect on these modes. For W7-X relevant collisionalities, the growth rate scales linearly with the electron skin depth, d e . Implications of our results for sawtoothing W7-X operation are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1998

Phase Inversion: Inferring Solar Subphotospheric Flow and Other Asphericity from the Distortion of Acoustic Waves

A method is proposed for analyzing an almost monochromatic train of waves propagating in a single direction in an inhomogeneous medium that is not otherwise changing in time. An effective phase is defined in terms of the Hilbert transform of the wave function, which is related, via the JWKB approximation, to the spatial variation of the background state against which the wave is propagating. The contaminating effect of interference between the truly monochromatic components of the train is eliminated using its propagation properties. Measurement errors, provided they are uncorrelated, are manifest as rapidly varying noise; although that noise can dominate the raw phase-processed signal, it can largely be removed by low-pass filtering. The intended purpose of the analysis is to determine the distortion of solar oscillations induced by horizontal structural variation and material flow. It should be possible to apply the method directly to sectoral modes. The horizontal phase distortion provides a measure of longitudinally averaged properties of the Sun in the vicinity of the equator, averaged also in radius down to the depth to which the modes penetrate. By combining such averages from different modes, the two-dimensional variation can be inferred by standard inversion techniques. After taking due account of horizontal refraction, it should be possible to apply the technique also to locally sectoral modes that propagate obliquely to the equator and thereby build a network of lateral averages at each radius, from which the full three-dimensional structure of the Sun can, in principle, be determined as an inverse Radon transform.

Gough, Douglas↗
DOE OSTI2023

Electronic Structure and Anion Photoelectron Spectroscopy of Uranium–Gold Clusters UAu n – , n = 3–7

A collaborative effort between experiment and theory towards elucidating the electronic and molecular structures of uranium-gold clusters is presented. Anion photoelectron spectra of UAu n – (n=3-7) were taken at third (355 nm) and fourth (266 nm) harmonics of a Nd:YAG laser, as well as excimer (ArF 193nm) photon energies, where the experimental adiabatic electron affinities (AEA) and vertical detachment energies (VDE) values were measured. Complementary first principles calculations were subsequently carried out to corroborate experimentally determined electron detachment energies and to determine the geometry and electronic structure for each cluster. Except for the ring-like neutral isomer of UAu 6 where one unpaired electron is spread over the Au atoms, all other neutral and anionic UAu n clusters (n = 3 - 7) were calculated to possess open-shell electrons with the unpaired electrons localized on the central U atom. The smaller clusters closely resemble the analogous UF n species, but significant deviations are seen starting with UAu 5 where a competition between U-Au and Au-Au bonding begins to become apparent. The UAu 6 system appears to mark a transition where Au-Au interactions begin to dominate, where both a ring-like and two heavily distorted octahedral structures around the central U atom are to be nearly isoenergetic. With UAu 7 , only ring-like structures are calculated. Altogether, the calculated electron detachment energies are in good agreement with the experimental values

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Structural and Electronic Effect Driven Distortions in Visible Light Absorbing Polar Materials A Ta 2 V 2 O 11 ( A = Sr, Pb)

Complex vanadates of tantalum(V), such as ATa 2 V 2 O 11 (A = Sr, Pb), are rare and underrated materials, which have potential application domains that could be substantially expanded, mitigating the existing controversy on their atomic and electronic organization. Herein, we present a thorough structural examination combining synchrotron powder X-ray diffraction-aided distortion mode analysis with computational methods to study hettotypes of SrTa 2 V 2 O 11 (STVO) and PbTa 2 V 2 O 11 (PTVO). Being distinct from the perovskite family due to the presence of [VO 4 ] groups, both compounds are polar dielectric materials with certain similarities to SBT and PBT Aurivillius phases. Applying the model of anions of metallic matrices to the analysis of electron localization functions calculated on top of as-established equilibrium structures helps retrace the effects in the Sr and Pb surroundings on the respective crystal packings of STVO and PTVO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1987

The rotationally modulated Zeeman spectrum at nearly 10 to the 9th Gauss of the white dwarf PG 1031 + 234

Detailed analyses are performed of high-quality, phase-resolved CCD spectroscopy of the absorption-line spectrum throughout its rotation period of the new white dwarf PG 1031 + 234. The spectral variations are discussed and compared with new theoretical calculations of the behavior of hydrogen in strong magnetic fields. This analysis is then extended through a modeling procedure which produces a synthetic magnetically distorted spectrum for a star of arbitrary field strength and structure. The results confirm that PG 1031 + 234 possesses the strongest field yet detected on a white dwarf, with regions on the surface spanning the range of about 200 to nearly 1000 MG. The spectroscopic data reflect a field pattern containing a slightly offset global component of polar field strength of about 500 MG together with a localized magnetic 'spot' whose central field approaches 2000 MG.

Latter, William B.↗
DOE OSTI2021

Impact of Charge Voltage on Factors Influencing Capacity Fade in Layered NMC622: Multimodal X-ray and Electrochemical Characterization

Ni-rich NMC is an attractive Li-ion battery cathode due to its combination of energy density, thermal stability, and reversibility. While higher delivered energy density can be achieved with a more positive charge voltage limit, this approach compromises sustained reversibility. Improved understanding of the local and bulk structural transformations as a function of charge voltage, and their associated impacts on capacity fade are critically needed. Through simultaneous operando synchrotron X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS) of cells cycled at 3–4.3 or 3–4.7 V, this study presents an in-depth investigation into the effects of voltage window on local coordination, bulk structure, and oxidation state. These measurements are complemented by ex situ X-ray fluorescence (XRF) mapping and scanning electrochemical microscopy mapping (SECM) of the negative electrode, X-ray photoelectron spectroscopy (XPS) of the positive electrode, and cell level electrochemical impedance spectroscopy (EIS). Initially, cycling between 3 and 4.7 V leads to greater delivered capacity due to greater lithium extraction, accompanied by increased structural distortion, moderately higher Ni oxidation, and substantially higher Co oxidation. Continued cycling at this high voltage results in suppressed Ni and Co redox, greater structural distortion, increased levels of transition metal dissolution, higher cell impedance, and 3× greater capacity fade.

capacity fading mechanisms↗
DOE OSTI2025

Unconventional magnetotransport and antiferromagnetic order in Eu 2 ⁢InTe 5

Here, we report on the structural characterization and physical properties of Eu 2 ⁢InTe 5 , a distorted square-net motif antiferromagnetic semiconductor. Single crystal x-ray diffraction measurements reveal a distortion of the Te square-net layers such that an orthorhombic supercell is necessary to accurately describe the structure. Magnetization, resistivity, and specific heat measurements confirm antiferromagnetic ordering at 𝑇 𝑁 = 7.3K. Anisotropy in magnetization data suggests the magnetic moments are oriented parallel to the 𝑐 axis. We observe an unconventional transverse magnetoresistance and Hall resistivity in the paramagnetic state (𝑇 ≤ 80K), indicating strong coupling between localized Eu 2+ magnetic moments and conduction electrons. Resistivity and Hall measurements indicate the material is a heavily doped semiconductor, with impurity states related to disorder. Our findings highlight a relatively unexplored Eu-based antiferromagnetic semiconductor with unconventional magnetotransport behavior.

Cook, Matthew S. [Oak Ridge National Laboratory (O↗
NASA NTRS1980

An investigation of wave sheltering by islands

The results of SAR, HF radar, wave rider buoy, and pressure sensor studies of wave behavior around San Clemente Island off the coast of California are reported. The SAR operated at a frequency of 1.2 GHz corresponding to a wavelength of 25 cm at 25 m resolution. Imagery was corrected for the slant range distortion and two-dimensional fast Fourier transforms were used to obtain two-dimensional wave number spectra. A 1 MW source was employed for the HF radar, with a receiving antenna synthesized by mounting the receiver on a van which drove along straight stretches of an oceanside highway. The measurement of 77 m waves displayed a shadow effect after the island, with an unexpected recovery which implies local wave generation. Reflected energy was determined to be too weak to account for the waves, and a nonlinear transfer of wave energy from waves moving parallel to the island was concluded to be the source of the observed inner wave energy.

Hsiao, S. V.↗
DOE OSTI2024

A multiscale anisotropic polymer network model coupled with phase field fracture

The study of polymers has continued to gain substantial attention due to their expanding range of applications, spanning essential engineering fields to emerging domains like stretchable electronics, soft robotics, and implantable sensors. These materials exhibit remarkable properties, primarily stemming from their intricate polymer chain network, which, in turn, increases the complexity of precisely modeling their behavior. Especially for modeling elastomers and their fracture behavior, accurately accounting for the deformations of the polymer chains is vital for predicting the rupture in highly stretched chains. Despite the importance, many robust multiscale continuum frameworks for modeling elastomer fracture tend to simplify network deformations by assuming uniform behavior among chains in all directions. Recognizing this limitation, our study proposes a multiscale fracture model that accounts for the anisotropic nature of elastomer network responses. At the microscale, damage in the chains is assumed to be driven by both the chain's entropy and the internal energy due to molecular bond distortions. In order to bridge the stretching in the chains to the macroscale deformation, we employ the maximal advance path constraint network model, inherently accommodating anisotropic network responses. As a result, chains oriented differently can be predicted to exhibit varying stretch and, consequently, different damage levels. To drive macroscale fracture based on damages in these chains, we utilize the micromorphic regularization theory, which involves the introduction of dual local-global damage variables at the macroscale. The macroscale local damage variable is obtained through the homogenization of the chain damage values, resulting in the prediction of an isotropic material response. The macroscale global damage variable is subjected to nonlocal effects and boundary conditions in a thermodynamically consistent phase field continuum formulation. Moreover, the total dissipation in the system is considered to be mainly due to the breaking of the molecular bonds at the microscale. To validate our model, we employ the double-edge notched tensile test as a benchmark, comparing simulation predictions with existing experimental data. Additionally, to enhance our understanding of the fracturing process, we conduct uniaxial tensile experiments on a square film made up of polydimethylsiloxane (PDMS) rubber embedded with a hole and notches and then compare our simulation predictions with the experimental observations. Furthermore, we visualize the evolution of stretch and damage values in chains oriented along different directions to assess the predictive capacity of the model. In conclusion, the results are also compared with another existing model to evaluate the utility of our model in accurately simulating the fracture behavior of rubber-like materials.

42 ENGINEERING↗
DOE OSTI2022

Dispersion and stability mechanism of Pt nanoparticles on transition-metal oxides

The heterogeneous catalysts of Pt/transition-metal oxides are typically synthesized through calcination at 500 °C, and Pt nanoparticles are uniformly and highly dispersed when hydrogen peroxide (H 2 O 2 ) is applied before calcination. The influence of H 2 O 2 on the dispersion and the stability of Pt nanoparticles on titania-incorporated fumed silica (Pt/Ti–FS) supports was examined using X-ray absorption fine structure (XAFS) measurements at the Pt L 3 and Ti K edges as well as density functional theory (DFT) calculations. The local structural and chemical properties around Pt and Ti atoms of Pt/Ti–FS with and without H 2 O 2 treatment were monitored using in-situ XAFS during heating from room temperature to 500 °C. XAFS revealed that the Pt nanoparticles of H 2 O 2 -Pt/Ti–FS are highly stable and that the Ti atoms of H 2 O 2 -Pt/Ti–FS support form into a distorted-anatase TiO 2 . DFT calculations showed that Pt atoms bond more stably to oxidized–TiO 2 surfaces than they do to bare- and reduced–TiO 2 surfaces. XAFS measurements and DFT calculations clarified that the presence of extra oxygen atoms due to the H 2 O 2 treatment plays a critical role in the strong bonding of Pt atoms to TiO 2 surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1978

Influence of wave dispersion on vortex pairing in a jet

The geometry of large-scale structures in the turbulent mixing layer of a moderate Reynolds number jet is deduced from measurements of the fluctuating pressure in the hydrodynamic near field. The structures are rings of concentrated vorticity that distort with downstream distance until statistical axisymmetry disappears. The rings are spaced quasi-periodically and coalesce with each other, producing larger spacings. Statistical and flow-visualization techniques are applied to free and forced jets over a range of Reynolds numbers from 5000 to 50,000 to demonstrate that rings of a given spacing do not coalesce with each other until they are far enough downstream that the local mixing layer has attained some critical thickness which scales with the wavelength of the vortex pair. Wave dispersion is evaluated as a plausible mechanism for localizing the coalescences. The central feature of the model is the observation that a shear layer is dispersive to wavelengths much longer than its thickness and nondispersive to shorter waves.

Petersen, R. A.↗
NASA NTRS1993

A comparison of the cosmic microwave and cosmic X-ray backgrounds - Constraints on local sources of the fluctuations observed by COBE

It has been suggested by Hogan (1992) that the microwave background anisotropy detected by the COBE DMR experiment (Smoot et al., 1992) might be produced by inverse Compton scattering from hot diffuse clouds of electrons in nearby superclusters. If the COBE fluctuations are due to this mechanism, then the absence of anticorrelations between maps of the cosmic microwave and cosmic X-ray backgrounds constrains the temperature (16 keV) and density (less than 2 x 10 exp -6/cu cm) of the ionized supercluster gas. Since the COBE limits on spectral distortion indicate that the temperature of the intergalactic medium is less than 10 keV, we conclude that the fluctuations observed by COBE are probably not produced by this mechanism.

Boughn, S. P.↗
NASA NTRS1989

Interaction between Tollmien-Schlichting waves and free-stream disturbances in boundary-layer flows

A numerical study of the generation of Tollmien-Schlichting (T-S) waves due to the interaction between a small freestream disturbance and a small localized variation of the surface geometry has been carried out using finite difference methods. The nonlinear steady flow is of the viscous-inviscid interactive type while the unsteady disturbed flow is assumed to be governed by the Navier-Stokes equations linearized about this flow. Numerical solutions illustrate the growth or decay of the T-S waves generated by the interaction between the freestream disturbance and the surface distortion, depending on the value of the scaled Strouhal number. An important result of this receptivity problem is the numerical determination of the amplitude of the Tollmien-Schlichting waves.

Bodonyi, R. J.↗
NASA NTRS1994

Effect of high-latitude ionospheric convection on Sun-aligned polar caps

A coupled magnetospheric-ionospheric (M-I) magnetohydrodynamic (MHD) model has been used to simulate the formation of Sun-aligned polar cap arcs for a variety of interplanetary magnetic field (IMF) dependent polar cap convection fields. The formation process involves launching an Alfven shear wave from the magnetosphere to the ionosphere where the ionospheric conductance can react self-consistently to changes in the upward currents. We assume that the initial Alfven shear wave is the result of solar wind-magnetosphere interactions. The simulations show how the E region density is affected by the changes in the electron precipitation that are associated with the upward currents. These changes in conductance lead to both a modified Alfven wave reflection at the ionosphere and the generation of secondary Alfven waves in the ionosphere. The ensuing bouncing of the Alfven waves between the ionosphere and magnetosphere is followed until an asymptotic solution is obtained. At the magnetosphere the Alfven waves reflect at a fixed boundary. The coupled M-I Sun-aligned polar cap arc model of Zhu et al.(1993a) is used to carry out the simulations. This study focuses on the dependence of the polar cap arc formation on the background (global) convection pattern. Since the polar cap arcs occur for northward and strong B(sub y) IMF conditions, a variety of background convection patterns can exist when the arcs are present. The study shows that polar cap arcs can be formed for all these convection patterns; however, the arc features are dramatically different for the different patterns. For weak sunward convection a relatively confined single pair of current sheets is associated with the imposed Alfven shear wave structure. However, when the electric field exceeds a threshold, the arc structure intensifies, and the conductance increases as does the local Joule heating rate. These increases are faster than a linear dependence on the background electric field strength. Furthermore, above the threshold, the single current sheet pair splits into multiple current sheet pairs. For the fixed initial ionospheric and magnetospheric conditions used in this study, the separation distance between the current pairs was found to be almost independent of the background electric field strength. For either three-cell or distorted two-cell background convection patterns the arc formation favored the positive B(sub y) case in the northern hemisphere.

Sojka, J. J.↗
DOE OSTI2022

Contributions to Loss Across the Magnetopause During an Electron Dropout Event

Abstract Dropout events are dramatic decreases in radiation belt electron populations that can occur in as little as 30 minutes. Loss to magnetopause due to a combination of magnetopause shadowing and outward radial transport plays a significant role in these events. We examine the dropout of relativistic electron populations during the October 2012 geomagnetic storm using simulated electron phase space density, evaluating the contribution of different processes to losses across the magnetopause. We compare loss contribution from outward transport calculated using a standard empirical radial diffusion model that assumes a dipolar geomagnetic field to an event‐specific radial diffusion model evaluated with a non‐dipolar geomagnetic field. We additionally evaluate the contribution of Shabansky type 1 particles, which bounce along magnetic field lines with local equatorial maxima, to the loss calculated during this event. We find that the empirical radial diffusion model with a dipolar background field underestimates the contribution of radial diffusion to this dropout event by up to 10% when compared to the event‐specific, non‐dipolar radial diffusion model. We additionally find that including Shabansky type 1 particles in the initial electron phase space density, that is, allowing some magnetic field lines distorted from the typical single‐minima configuration in drift shell construction, increases the calculated loss by an average of 0.75%. This shows that the treatment of the geomagnetic field significantly impacts the calculation of electron losses to the magnetopause during dropout events, with the non‐dipolar treatment of radial diffusion being essential to accurately quantify the loss of outer radiation belt populations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Similarities and differences between nickelate and cuprate films grown on a SrTiO 3 substrate

The recent discovery of superconductivity in Sr-doped NdNiO 2 films grown on SrTiO 3 started a novel field within unconventional superconductivity. Therefore, to understand the similarities and differences between nickelate and cuprate layers on the same SrTiO 3 substrate, here based on the density functional theory we have systematically investigated the structural, electronic, and magnetic properties of NdNiO 2 / SrTiO 3 and CaCuO 2 / SrTiO 3 systems. Our results revealed a strong lattice reconstruction in the case of NdNiO 2 / SrTiO 3 , resulting in a polar film, with the surface and interfacial NiO 2 layers presenting opposite displacements. To avoid the “polar catastrophe,” the NiO 2 surface to the vacuum reconstructs as well. However, for CaCuO 2 / SrTiO 3 , the distortions of those same two CuO 2 layers were in the same direction. In addition, we found this distortion to be approximately independent of the studied range of film thickness for the nickelate films. Furthermore, we also observed a two-dimensional electron gas at the interface between NdNiO 2 and SrTiO 3 , caused by the polar discontinuity, in agreement with recent literature. For NdNiO 2 / SrTiO 3 the two-dimensional electron gas extends over several layers, while for CaCuO 2 / SrTiO 3 this electronic rearrangement is very localized at the interface between CaCuO 2 and SrTiO 3 . The electronic reconstruction found at the interface involves a strong occupation of the Ti 3 d x y state. In both cases, there is a significant electronic charge transfer from the surface Ni or Cu layers to the Ti interface layer. The interfacial Ni and Cu layers are hole and electron doped, respectively. By introducing magnetism and electronic correlation, we observed that the d 3 z 2 - r 2 orbital of Ni becomes itinerant while the same orbital for Cu remains doubly occupied, establishing a clear two- vs one-orbital active framework for the description of these systems. Furthermore, we also observed a strong magnetic reconstruction at the NdNiO 2 surface to vacuum layer where magnetism is basically suppressed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Local site behavior of the 5$d$ and 4$f$ ions in the frustrated pyrochlore Ho 2 Os 2 O 7

The pyrochlore osmate Ho 2 Os 2 O 7 is a candidate material for a fragile J=0 local singlet ground state, however little is known regarding the single-ion behavior of either the Os or Ho ions. To address this we present polarized neutron powder diffraction (PNPD) and resonant inelastic x-ray scattering (RIXS) measurements that separately probe the local site behavior of the Os and Ho ions. The PNPD results are dominated by Ho 3+ scattering and the analysis reveals local site susceptibility behavior consistent with spin ice materials. Complimentary unpolarized neutron powder diffraction show an ordered spin ice ground state in an applied magnetic field. To isolate the Os 4+ single-ion behavior we present resonant inelastic x-ray scattering (RIXS) measurements at the osmium L-edge. Analysis of the RIXS spectra parameterize the spin-orbit coupling (0.35 eV), Hund’s coupling (0.27 eV) and trigonal distortion (-0.17 eV). Here, the results are considered within the context of a J=0 model and possible departures from this through structural distortions, excitonic interactions and 5d-4f interactions between the Os ion and the surrounding Ho lattice. The experimental methodology employed highlights the complimentary information available in rare earth based 5d pyrochlores from distinct neutron and x-ray scattering techniques that allow for the isolation and determination of the behavior of the different ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗