Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “limited data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

All-electron molecular Dirac-Hartree-Fock calculations - Properties of the XH4 and XH2 molecules and the reaction energy XH4 yields XH2 + H2, X = Si, Ge, Sn, Pb

Relativistic corrections to a number of properties of the Group IV hydrides are calculated using the Dirac-Hartree-Fock method. The use of first-order perturbation theory is sufficient to obtain relativistic corrections for Ge, but the effects of spin-orbit interaction and other higher-order effects begin to show for Sn and become important for Pb. The energy of the reaction XH4 yields XH2 + H2 (X = Si, Ge, Sn, and Pb) is also calculated. The results are compared with relativistic effective core potential calculations, first-order perturbation theory calculations, and limited experimental data.

Dyall, Kenneth G.↗
NASA NTRS1992

Single expansion ramp nozzle simulations

The single-expansion-ramp-nozzle (SERN) experiment underway at NASA Ames Research Center simulates the National Aerospace Plane propulsive jet-plume flow. Recently, limited experimental data has become available from an experiment with a generic nozzle/afterbody model in a hypersonic wind tunnel. The present paper presents full three-dimensional solutions obtained with the implicit Navier-Stokes solver, FL3D, for the baseline model and a version of the model with side extensions. Analysis of the computed flow clearly shows the complex 3-D nature of the flow, critical flow features, and the effect of side extensions on the plume flow development. Flow schematics appropriate for the conditions tested are presented for the baseline model and the model with side extensions. The computed results show excellent agreement with experimental shadowgraph and with surface pressure measurements. The computed and experimental surface oil-flows show the same features but may be improved by appropriate turbulence modeling.

Ruffin, Stephen M.↗
NASA NTRS1992

Multifrequency passive microwave observations of soil moisture in an arid rangeland environment

A cooperative experiment was conducted by teams from the U.S. and U.S.S.R. to evaluate passive microwave instruments and algorithms used to estimate surface soil moisture. Experiments were conducted as part of an interdisciplinary experiment in an arid rangeland watershed located in the southwest United States. Soviet microwave radiometers operating at wavelengths of 2.25, 21 and 27 cm were flown on a U.S. aircraft. Radio frequency interference limited usable data to the 2.25 and 21 cm systems. Data have been calibrated and compared to ground observations of soil moisture. These analyses showed that the 21 cm system could produce reliable and useful soil moisture information and that the 2.25 cm system was of no value for soil moisture estimation in this experiment.

Jackson, T. J.↗
NASA NTRS1991

Comparison of high frequency, high temperature core loss and B-H loop characteristics of an 80 Ni-Fe crystalline alloy and two iron-based amorphous alloys

Limited experimental data exists for the specific core loss and dynamic B-H loops for soft magnetic materials for the combined conditions of high frequency and high temperature. This experimental study investigates the specific core loss and dynamic B-H characteristics of a nickel-iron crystalline magnetic alloy (Supermalloy) and two iron-based amorphous magnetic materials (Metglas 2605S-3A and Metglas 2605SC) over the frequency range of 1-50 kHz and temperature range of 23-300 C under sinusoidal voltage excitation. The effects of maximum magnetic flux density, frequency, and temperature on the specific core loss and on the size and shape of the B-H loops are examined. The Supermalloy and Metglass 2605S-3A and 2605SC data are used to compare the core loss of transformers with identical kVA and voltage ratings.

Wieserman, William R.↗
NASA NTRS1992

Comparison of high temperature, high frequency core loss and dynamic B-H loops of a 2V-49Fe-49Co and a grain oriented 3Si-Fe alloy

The design of power magnetic components such as transformers, inductors, motors, and generators, requires specific knowledge about the magnetic and electrical characteristics of the magnetic materials used in these components. Limited experimental data exists that characterizes the performance of soft magnetic materials for the combined conditions of high temperature and high frequency over a wide flux density range. An experimental investigation of a 2V-49-Fe-49Co (Supermendur) and a grain oriented 3 Si-Fe (Magnesil) alloy was conducted over the temperature range of 23 to 300 C and frequency range of 0.1 to 10 kHz. The effects of temperature, frequency, and maximum flux density on the core loss and dynamic B-H loops for sinusoidal voltage excitation conditions are examined for each of these materials. A comparison of the core loss of these two materials is also made over the temperature and frequency range investigated.

Wieserman, W. R.↗
NASA NTRS1992

Solar-generated disturbances in the heliosphere

It has long been known that disturbances can propagate from Sun to Earth with periods of a few days following large solar flares. Other disturbances re-occur with the solar rotation rate implying that they are more or less stably generated by a specific region on the solar surface. At the Sun some of these disturbances are readily observed in coronagraphs and against the solar disk. Several techniques have been used to remotely detect and follow different disturbances in the interplanetary medium as they propagate outward from the Sun. These techniques include interplanetary scintillation, kilometric radio and Helios photometer observations. In situ, spacecraft can mark the passage of disturbances by direct measurement along the column convected past the observation point. As probes of the heliospheric magnetic field and disturbances in themselves, particles above the energy of the thermal plasma traverse the heliosphere and indicate the extent of its structures. Both the basic physics, as well as the spatial and temporal evolution of disturbances, can be confused as they propagate through the interplanetary medium largely because of the data coverage limitations. However, as their basic physics becomes better known through more complete observations and theory, the extent and accuracy of these disturbances can be better described.

Jackson, B. V.↗
NASA NTRS1989

Antarctic carbonaceous chondrites - New opportunities for research

An account is given of the types of carbonaceous meteorites available in the Antarctic collections of the U.S. and Japan. In the case of the collection for Victoria Land and Queen Maud Land, all known classes for meteorites except C1 are present; available pairing data, though limited, are indicative of the presence of many different falls. Thus far, attention has been focused on the largest meteorites. Most samples, however, are small.

Mcsween, Harry Y., Jr.↗
NASA NTRS1992

Design for inadvertent damage in composite laminates

Simplified predictive methods and models to computationally simulate durability and damage in polymer matrix composite materials/structures are described. The models include (1) progressive fracture, (2) progressively damaged structural behavior, (3) progressive fracture in aggressive environments, (4) stress concentrations, and (5) impact resistance. Several examples are included to illustrate applications of the models and to identify significant parameters and sensitivities. Comparisons with limited experimental data are made.

Singhal, Surendra N.↗
NASA NTRS1993

The faintest stars - From Schmidt plates to luminosity functions

We describe the construction of a photometric catalog from scans of IIIaF and IVN plate material in 11 fields of the UKSRC and POSSII surveys. The procedures used and quality checks applied are described in detail, and should be considered as illustrative for those planning scientific programs with the forthcoming scans of these surveys. We find our plate material is complete to I of about 18 and R of about 20.5 with photometric uncertainties of +/- 0.20 and +/- 0.25 magnitudes (respectively) at those limits. These data are used to construct luminosity functions for stars within 150 pc of the sun in four distinct directions. We find no significant evidence for variations in the form of the luminosity function in different locations within the Galactic disk. Approximately 10-20 percent variations are seen in the normalization of the luminosity function.

Tinney, C. G.↗
NASA NTRS1953

Estimation of Hydrodynamic Impact Loads and Pressure Distributions on Bodies Approximating Elliptical Cylinders with Special Reference to Water Landings of Helicopters

An approximate method for computing water loads and pressure distributions on lightly loaded elliptical cylinders during oblique water impacts is presented. The method is of special interest for the case of emergency water landings of helicopters. This method makes use of theory developed and checked for landing impacts of seaplanes having bottom cross sections of V and scalloped contours. An illustrative example is given to show typical results obtained from the use of the proposed method of computation. The accuracy of the approximate method was evaluated through comparison with limited experimental data for two-dimensional drops of a rigid circular cylinder at a trim of 0 degrees and a flight -path angle of 90 degrees. The applicability of the proposed formulas to the design of rigid hulls is indicated by the rough agreement obtained between the computed and experimental results. A detailed computational procedure is included as an appendix.

Schnitzer, Emanuel↗
NASA NTRS1947

Summary of lateral-control research

A summary has been made of the available information on lateral control. A discussion is given of the criterions used in lateral-control specifications, of the factors involved in obtaining satisfactory lateral control, and of the methods employed in making lateral-control investigations in flight and in wind tunnels. The available data on conventional flap-type ailerons having various types of aerodynamic balance are presented in a form convenient for use in design. The characteristics of spoiler devices and booster mechanisms are discussed. The effects of Mach number, boundary layer, and distortion of the wing or of the lateral-control system are considered insofar as the available information permits. An example is included to illustrate the use of the design data. The limitations of the available information and some of the lateral-control problems that remain to be solved are indicated.

Toll, Thomas A↗
NASA NTRS1993

Noise levels from a model turbofan engine with simulated noise control measures applied

A study of estimated full-scale noise levels based on measured levels from the Advanced Ducted Propeller (ADP) sub-scale model is presented. Testing of this model was performed in the NASA Lewis Low Speed Anechoic Wind Tunnel at a simulated takeoff condition of Mach 0.2. Effective Perceived Noise Level (EPNL) estimates for the baseline configuration are documented, and also used as the control case in a study of the potential benefits of two categories of noise control. The effect of active noise control is evaluated by artificially removing various rotor-stator interaction tones. Passive noise control is simulated by applying a notch filter to the wind tunnel data. Cases with both techniques are included to evaluate hybrid active-passive noise control. The results for EPNL values are approximate because the original source data was limited in bandwidth and in sideline angular coverage. The main emphasis is on comparisons between the baseline and configurations with simulated noise control measures.

Hall, David G.↗
NASA NTRS1993

Transmission over EHF mobile satellite channels

Land mobile satellite communications at Ka-band (30/20 GHz) are attracting an increasing interest among researchers because of the frequency band availability and the possibility of small earth station designs. However, communications at the Ka-band pose significant challenges in the system designs due to severe channel impairments. Because only very limited experimental data for mobile applications at Ka-band is available, this paper studies the channel characteristics based on experimental data at L-band (1.6/1.5 GHz) and the use of frequency scaling. The land mobile satellite communication channel at Ka-band is modelled as log-normal Rayleigh fading channel. The first and second-order statistics of the fading channel are studied. The performance of a coherent BPSK system over the fading channel at L-band and K-band is evaluated theoretically and validated by computer simulations. Conclusions on the communication channel characteristics and system performance at L-band and Ka-band are presented.

Zhuang, W.↗
NASA NTRS1994

Numerical Simulation of Cylindrical, Self-field MPD Thrusters with Multiple Propellants

A two-dimensional, two-temperature, single fluid MHD code was used to predict the performance of cylindrical, self-field magnetoplasmadynamic (MPD) thrusters operated with argon, lithium, and hydrogen propellants. A thruster stability equation was determined relating maximum stable J(sup 2)/m values to cylindrical thruster geometry and propellant species. The maximum value of J(sup 2)/m was found to scale as the inverse of the propellant molecular weight to the 0.57 power, in rough agreement with limited experimental data which scales as the inverse square root of the propellant molecular weight. A general equation which relates total thrust to electromagnetic thrust, propellant molecular weight, and J(sup 2)/m was determined using reported thrust values for argon and hydrogen and calculated thrust values for lithium. In addition to argon, lithium, and hydrogen, the equation accurately predicted thrust for ammonia at sufficiently high J(sup 2)/m values. A simple algorithm is suggested to aid in the preliminary design of cylindrical, self-field MPD thrusters. A brief example is presented to illustrate the use of the algorithm in the design of a low power MPD thruster.

Lapointe, Michael R.↗
NASA NTRS1993

Modeling the Europa plasma torus

The existence of a torus of plasma generated by sputtering from Jupiter's satellite Europa has long been suspected but never yet convincingly demonstrated. Temperature profiles from Voyager plasma observations indicate the presence of hot, possibly freshly picked-up ions in the general vicinity of the orbit of Europa, which may be interpreted as evidence for a local plasma torus. Studies of ion partitioning in the outer regions of the Io torus reveal that the oxygen to sulfur mixing ratio varies with radial distance; this may indicates that oxygen-rich matter is injected from a non-Io source, most probably Europa. We have constructed a quantitative model of a plasma torus near the orbit of Europa which takes into account plasma input from the Io torus, sputtering from the surface of Europa, a great number of ionization and charge exchange processes, and plasma loss by diffusive transport. When the transport time is chosen so that the model's total number density in consistent with the observed total plasma density, the contribution from Europa is found to be significant although not dominant. The model predicts in detail the ion composition, charge states, and the relative fractions of hot Europa-generated and (presumed) cold Io-generated ions. The results are generally consistent with observations from Voyager and can in principle (subject to limitations of data coverage) be confirmed in more detail by Ulysses.

Schreier, Ron↗
NASA NTRS1995

Robotic-Vehicle Perception Control For Detecting Obstacles

Obstacle-detection systems designed to make most of limited data-processing resources. Bump or step identified, from stereoscopic images of scene ahead, by obstacle-detection algorithm. If bump or step exceeds specified step height, marked as obstacle, and control actions taken to avoid obstacle.

Grandjean, Pierrick C.↗
NASA NTRS1995

Computation of vertical profiles of longwave radiative cooling over the equatorial Pacific

An important quantity whose magnitude has not been throughly examined is the vertical distribution of heating in the Tropics. The details of the vertical distribution of heating have a significant impact on a number of phenomena, including the 30-60 day oscillation, sometimes known as the intraseasonal oscillation. Prior attempts to establish the structure of the heating relied on limited field data or assimilated data, coupled with climatological radiative heating parameters. The availability of high quality global-scale datasets has made it possible to make more accurate calculations than were possible a few years ago. An important component of the apparent heat budget is the longwave radiative cooling, which in this paper is found by using the ECMWF/WCRP/TOGA Archive 2 and ISCCP C1 datasets, together with a well-established parameterization scheme. A method is developed that can be used to estimate the vertical structure of cloud amounts based on top-of-atmosphere cloud observations, and the results are used with a wide-band longwave parameterization to produce longwave cooling rates over the tropical Pacific Ocean. Outgoing longwave radiation is calculated and compared the ERBE results. The calculated values are generally higher than those from ERBE, though the spatial distributions are similar. Some significant problems exist with the ECMWF upper-tropospheric water vapor amounts, which could imply uncertainties of 0.5 C/day in the calculated cooling rates. This is comparable to the differences associated with the minimum or random overlap assumptions used to generate cloud profiles.

Ramsey, Perry G.↗