Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lasers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Laser-Enabled Auger Decay in Rare-Gas Atoms

In rare-gas atoms, Auger decay in which an inner-valence shell ns hole is filled is not energetically allowed. However, in the presence of a strong laser field, a new laser-enabled Auger decay channel can open up to increase the double-ionization yield. This process is efficient at high laser intensities, where an ns hole can be filled within a few femtoseconds of its creation. This novel laser-enabled Auger decay process is of fundamental importance for controlling electron dynamics in atoms, molecules, and materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dispersion-Based Fresh-Slice Scheme for Free-Electron Lasers

The fresh-slice technique improved the performance of several self-amplified spontaneous emission free-electron laser schemes by granting selective control on the temporal lasing slice without spoiling the other electron bunch slices. So far, the implementation has required a special insertion device to create the beam yaw, called a dechirper. Finally, we demonstrate a novel scheme to enable fresh-slice operation based on electron energy chirp and orbit dispersion that can be implemented at any free-electron laser facility without additional hardware.

47 OTHER INSTRUMENTATION↗

Laser damage resistant pits in dielectric coatings created by femtosecond laser machining

Replacing growing damage sites with benign, laser damage resistant features in multilayer dielectric films may enable large mirrors to be operated at significantly higher fluences. Laser damage resistant features have been created in high reflecting coatings on glass substrates using femtosecond laser machining. These prototype features have been damage tested to over 40 J/cm{sup 2} (1064nm, 3ns pulselength) and have been shown not to damage upon repeated irradiation at 40J/cm{sup 2}. Further work to optimize feature shape and laser machining parameters is ongoing.

42 ENGINEERING↗

Simple approach to the relation between laser frequency noise and laser line shape

Frequency fluctuations of lasers cause a broadening of their line shapes. Although the relation between the frequency noise spectrum and the laser line shape has been studied extensively, no simple expression exists to evaluate the laser linewidth for frequency noise spectra that does not follow a power law. We present a simple approach to this relation with an approximate formula for evaluation of the laser linewidth that can be applied to arbitrary noise spectral densities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Machine-learning-based, online estimation of ceramic’s microstructure upon the laser spot brightness during laser sintering

The ceramic microstructure strongly influences its properties. During manufacturing, the online monitoring of microstructure is critical to ensure the desired material properties. So far, the microstructure on the relevant scale is usually characterized offline using scanning electron microscopy (SEM), which is time and cost-consuming. In this work, we demonstrate a cost-effective, machine learning (ML)-based approach to simulate the SEM micrographs in real-time from the laser spot brightness. We experimentally observed a strong correlation between the laser spot brightness and the corresponding microstructure at the exact locations. The brightness values obtained from thermal emission images and the corresponding SEM micrographs were used in the training datasets. The ML algorithm was a style-based conditional generative adversarial network (CGAN). After training, the ML model could generate high-fidelity microstructure images within 0.1 seconds based on in-situ captured brightness at the laser sintering spot. We used the average grain sizes as the metric to evaluate the accuracy of the ML-predicted micrographs. Here, the ML-predicted microstructures were in good agreement, with less than 5% in difference from the real SEM images. In conclusion, we demonstrate the cost-effective, online microstructure estimation during laser sintering with a simple setup (a camera, a regular computer, and the ML model).

08 HYDROGEN↗

An Improved Method of Mitigating Laser Induced Surface Damage Growth in Fused Silica Using a Rastered, Pulsed CO2 Laser

A new method of mitigating (arresting) the growth of large (>200 m diameter and depth) laser induced surface damage on fused silica has been developed that successfully addresses several issues encountered with our previously-reported large site mitigation technique. As in the previous work, a tightly-focused 10.6 {micro}m CO{sub 2} laser spot is scanned over the damage site by galvanometer steering mirrors. In contrast to the previous work, the laser is pulsed instead of CW, with the pulse length and repetition frequency chosen to allow substantial cooling between pulses. This cooling has the important effect of reducing the heat-affected zone capable of supporting thermo-capillary flow from scale lengths on the order of the overall scan pattern to scale lengths on the order of the focused laser spot, thus preventing the formation of a raised rim around the final mitigation site and its consequent down-stream intensification. Other advantages of the new method include lower residual stresses, and improved damage threshold associated with reduced amounts of redeposited material. The raster patterns can be designed to produce specific shapes of the mitigation pit including cones and pyramids. Details of the new technique and its comparison with the previous technique will be presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laser Ablation of Dental Calculus Around 400 nm Using a Ti:Sapphire Laser

A Nd:YAG laser-pumped, frequency-doubled Ti:sapphire laser is used for selective ablation of calculus. The laser provides ≤25 mJ at 400 nm (60-ns pulse width, 10-Hz repetition rate). The laser is coupled into an optical multimode fiber coiled around a 4-in.-diam drum to generate a top-hat output intensity profile. With coaxial water cooling, this is ideal for efficient, selective calculus removal. This is in stark contrast with tightly focused Gaussian beams that are energetically inefficient and lead to irreproducible results. Calculus is well ablated at high fluences ≥2 J/cm^2; stalling occurs below this fluence because of photobleaching. Healthy hard tissue is not removed at fluences ≤3 J/cm^2.

calculus removal↗

Effect Of Changing Laser Irradiance On The Laser Induced Plasma Parameters For Au/Cu Layered Target

Pulsed laser induced plasma (LIP) has a very short temporal existence. Due to the transient nature of the produced LIP, with a fast evolution of its characteristic parameters, these parameters are heavily dependent on the irradiation conditions such as incident laser intensity, irradiation spot size, ambient gas composition and pressure. It is also true that these parameters vary drastically with axial or radial distance from the target surface under the same irradiation. In the present work depth profiling measurements of gold film onto copper substrate have been performed and the effect of changing laser irradiance by changing the working distance on both electron density and electron temperature has been also studied.

36 MATERIALS SCIENCE↗

Subpicosecond 41.8-nm X-ray laser in the plasma produced by femtosecond laser irradiation of a xenon cluster jet

Model calculations are performed of the radiation gain for the 4d5d (J = 0) - 4d5p (J = 1) transition with a wavelength of 41.8 nm in Pd-like xenon ions in the plasma produced by femtosecond laser irradiation of a xenon cluster jet. Conditions for the excitation of an ultrashort-pulse ({approx}1 ps) X-ray laser are discussed. (lasers)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental study of bremsstrahlung and characteristic radiation spectra from laser targets irradiated with ultrashort laser pulses with intensities of up to {approx}10{sup 19} W/cm{sup 2}

Results from experimental studies of bremsstrahlung and characteristic radiation spectra from laser targets irradiated with ultrashort laser pulses with intensities of up to {approx}10{sup 19} W/cm{sup 2} are presented. The continuous spectra of hard X-ray emission from Ta and Al targets and the line spectrum of copper were measured. The temperature of fast electrons was obtained from the measured hard X-ray spectra, and the K{sub {alpha}} radiation yield from Ta was measured. The energy conversion efficiency of laser radiation into the copper characteristic radiation was obtained from the measured yield of K{sub {alpha}} radiation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Variation of harmonic spectra in laser-produced plasmas at variable phase of femtosecond laser pulses of different bandwidth

The intensity enhancement of harmonics and change in harmonic profiles have been observed in a few plasma plumes (La, In, Mn) under variable phase modulation of Ti:sapphire laser pulses. It is seen that variation of relative harmonic intensities in the plateau region could be achieved by chirp variation of narrowband ({approx}10 nm bandwidth) radiation. The effect of the self-phase modulation (SPM) of broadband ({approx}20 nm bandwidth) laser radiation on the harmonic emission from nanoparticles, C{sub 60}, and Ag plasma while passing through a glass slab is also studied. The observation of broadband harmonic emission and redshift in harmonic wavelengths for an unchirped laser pulse are explained in terms of SPM. The observation of blueshift of harmonic radiation with both positively and negatively chirped pulses was attributed to the different effects of SPM on the chirped pulses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High fidelity model of directed energy deposition: Laser-powder-melt pool interaction and effect of laser beam profile on solidification microstructure

Metal additive manufacturing technologies keep receiving a great deal of interest as well as strong requests to develop methods to link the process science to printed parts performance and understand how to overcome inherent limitations. Here, a high-fidelity model based on the multiphysics ALE3D code was developed to reproduce the directed energy deposition process down to the powder scale. This includes resolving the laser-powder-melt pool interactions (powder impingement and incorporation into melt pool, hydrodynamics flow condition and laser absorption inefficiencies) as well as the resulting solidification microstructure. This micrometer scale digital twin captured the effect of powder incorporation process and powder flow rate on porosity. Furthermore, it was used to explore how a ring laser beam profile instead of the standard Gaussian laser profile could decrease the thermal gradient along the solidification front in the melt pool, which in turn can increase propensity for more desirable equiaxed grains.

36 MATERIALS SCIENCE↗

Soot particle sizing during high-pressure Diesel spray combustion via time-resolved laser-induced incandescence

Single-pulse time-resolved laser-induced incandescence (TiRe-LII) signal transients from soot particulates were acquired during unsteady high pressure Diesel combustion in a constant volume cell for typical top dead center conditions during a Diesel engine cycle. Measurements were performed for initial gas pressures between 1 and 3 MPa, injection pressures between 50 and 130 MPa and laser probe timings between 5 and 16 ms after start of fuel injection. In separate experiments and for the same cell operating conditions gas temperatures were deduced from spectrally resolved soot pyrometry measurements. Implementing the LII model of Kock et al. [Combust. Flame 147 (20006) 79-92] ensemble mean soot particle diameters were evaluated from least-squares fitting of theoretical cooling curves to experimental TiRe-LII signal transients. Since in the experiments the environmental gas temperature and the width of an assumed particle size distribution were not known, the effects of the initial choice of these parameters on retrieved particle diameters were investigated. It is shown that evaluated mean particle diameters are only slightly biased by the choice of typical size distribution widths and gas temperatures. For a fixed combustion phase mean particle diameters are not much affected by gas pressure, however they become smaller at high fuel injection pressure. At a mean chamber pressure of 1.39 MPa evaluated mean particle diameters increased by a factor of two for probe delays between 5 and 16 ms after start of injection irrespective of the choices of first-guess fitting variables, indicating a certain robustness of data analysis procedure. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗