SEARCH · Engineering Papers

Results for “insulation resistance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Nano-infrared imaging of metal insulator transition in few-layer 1T-TaS 2

Abstract Among the family of transition metal dichalcogenides, 1T-TaS 2 stands out for several peculiar physical properties including a rich charge density wave phase diagram, quantum spin liquid candidacy and low temperature Mott insulator phase. As 1T-TaS 2 is thinned down to the few-layer limit, interesting physics emerges in this quasi 2D material. Here, using scanning near-field optical microscopy, we perform a spatial- and temperature-dependent study on the phase transitions of a few-layer thick microcrystal of 1T-TaS 2 . We investigate encapsulated air-sensitive 1T-TaS 2 prepared under inert conditions down to cryogenic temperatures. We find an abrupt metal-to-insulator transition in this few-layer limit. Our results provide new insight in contrast to previous transport studies on thin 1T-TaS 2 where the resistivity jump became undetectable, and to spatially resolved studies on non-encapsulated samples which found a gradual, spatially inhomogeneous transition. A statistical analysis suggests bimodal high and low temperature phases, and that the characteristic phase transition hysteresis is preserved down to a few-layer limit.

42 ENGINEERING↗

DOE OSTI2025

Determination of Ground Subsidence Around Snow Fences in the Arctic Region

In this study, we analyzed the effects of snow cover changes caused by snow fences (SFs) installed in 2017 in the Alaskan tundra to examine ground subsidence. Digital surface model data obtained through LiDAR-based remote sensing in 2019 and 2022, combined with a field survey in 2021, revealed approximately 0.2 m of ground subsidence around the SF. To investigate the relationship between SF-induced snow cover changes and ground subsidence, geophysical methods, electrical resistivity tomography (ERT) and ground-penetrating radar (GPR), were applied in 2023 to analyze subsurface characteristics. The increased snow cover due to the SF-enhanced insulation, delaying the penetration of winter cold into the subsurface. This delay caused subsurface temperatures to decrease more slowly, melting the upper permafrost and increasing the thickness of the active layer. ERT and GPR surveys well delineated the boundary between the active layer and permafrost, confirming that the increased snow cover thickened the active layer. This thickening led to the melting of pore ice, causing water runoff and ground compaction, which resulted in subsidence. The runoff also formed channels flowing eastward over the SF. This study highlights how changes in snow cover can influence active layer properties, leading to localized environmental changes and ground subsidence.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1977

Development of fire-resistant, low smoke generating, thermally stable end items for aircraft and spacecraft

Materials were developed to improve aircraft interior materials by modifying existing polymer structures, refining the process parameters, and by the use of mechanical configurations designed to overcome specific deficiencies. The optimization, selection, and fabrication of five fire resistant, low smoke emitting open cell foams are described for five different types of aircraft cabin structures. These include: resilient foams, laminate floor and wall paneling, thermal/acoustical insulation, molded shapes, and coated fabrics. All five have been produced from essentially the same polyimide precursor and have resulted in significant benefits from transfer of technology between the various tasks.

Gagliani, J.↗

NASA NTRS1995

Synthesis of low color, atomic oxygen resistant polyimides

The purpose of this project was to develop low color, atomic oxygen resistant polyimides for potential applications on spacecraft in low earth orbit. The material is needed in order to protect satellites and spacecraft from the gases and radiation found at those altitudes. Phosphorous containing polyimides have been shown to be especially resistant to corrosion and weight loss under oxygen plasma. Unfortunately the color of these phosphorous containing polyimides is still too high for them to be good heat insulators. While they are not as effective as teflon, the current material of choice. polyimides are much less dense than teflon and would be especially valuable if they could be made with low color. The approach taken was to synthesize a monomer which would contain the elements needed for giving the final polyimide its desired properties. In particular the monomer should incorporate phosphine or phosphine oxides and have bulky side groups to block any color forming charge transfer structures. The target molecule, 3,5-di-(trifluoromethylphenyl)-bis(3-aminophenyl) phosphine oxide, (containing both a phosphine oxide group and a bulky ditrifluoromethylphenyl group) was synthesized via three reactions in overall yield of 21 percent. In addition, a model compound, bis(3-phenylamine) phenyl phosphine oxide, was synthesized two different ways in order to establish the conditions for the nitration of phosphine oxides and their reduction to the amine. Finally, a trisubstituted phosphine oxide was synthesized. In all, seven phosphorus containing organic compounds were synthesized, purified and characterized. The model compound was reacted with oxydiphthalic anhydride to form a polyamic acid with inherent viscosity of 0.34. This material was cast into a film and heated, forming a normally colored fairly strong polyimide with a Tg of 240 C. The target compound was reacted with 6-fluorodiphthalic anhydride to give a polyamic acid with inherent viscosity of 0.19 and cast to give a heavily cracked colored film with a Tg of 230 C.

MacInnes, Dave↗

NASA NTRS1987

Thermally Insulating Support for Cryogenic Tanks

Passive alternate-load-path support scheme keeps weight low while conserving cryogenic liquid. Method of supporting inner vessel of large Dewar container minimizes heat conductance and weight but ensures high strength and impact resistance. Accommodates thermal expansion and contraction of vessel while introducing minimal stresses in structure. Inner vessel hangs from struts in outer vessel. Thin wall graphite/epoxy tube protected from high loads by close tolerance stops.

Parmley, Richard T.↗

NASA NTRS1983

Conduit for high temperature transfer of molten semiconductor crystalline material

A conduit for high temperature transfer of molten semiconductor crystalline material consists of a composite structure incorporating a quartz transfer tube as the innermost member, with an outer thermally insulating layer designed to serve the dual purposes of minimizing heat losses from the quartz tube and maintaining mechanical strength and rigidity of the conduit at the elevated temperatures encountered. The composite structure ensures that the molten semiconductor material only comes in contact with a material (quartz) with which it is compatible, while the outer layer structure reinforces the quartz tube, which becomes somewhat soft at molten semiconductor temperatures. To further aid in preventing cooling of the molten semiconductor, a distributed, electric resistance heater is in contact with the surface of the quartz tube over most of its length. The quartz tube has short end portions which extend through the surface of the semiconductor melt and which are lef bare of the thermal insulation. The heater is designed to provide an increased heat input per unit area in the region adjacent these end portions.

Fiegl, George↗

DOE OSTI2022

Cobalt as a promising dopant for producing semi-insulating β-Ga 2 O 3 crystals: Charge state transition levels from experiment and theory

Optical absorption and photoconductivity measurements of Co-doped β-Ga 2 O 3 crystals reveal the photon energies of optically excited charge transfer between the Co related deep levels and the conduction or valence band. The corresponding photoionization cross sections are fitted by a phenomenological model considering electron–phonon coupling. The obtained fitting parameters: thermal ionization (zero-phonon transition) energy, Franck–Condon shift, and effective phonon energy are compared with corresponding values predicted by first principle calculations based on density functional theory. A (+/0) donor level ~0.85 eV above the valence band maximum and a (0/-) acceptor level ~2.1 eV below the conduction band minimum are consistently derived. Temperature-dependent electrical resistivity measurement at elevated temperatures (up to 1000 K) yields a thermal activation energy of 2.1 ± 0.1 eV, consistent with the position of the Co acceptor level. Furthermore, the results show that Co doping is promising for producing semi-insulating β-Ga 2 O 3 crystals.

Materials science↗

NASA NTRS1988

Effects Of Radiation On Insulators

Report presents data on responses of electrically insulating thermosetting and thermoplastic polymers to radiation. Lowest-threshold-dose (LTD) levels and 25-percent-change levels presented for such properties as tensile strength and electrical resistivity. Data on radiation-induced outgassing also given.

Bouquet, Frank L.↗

DOE OSTI2023

DC bulk conductive ceramic with low RF and microwave loss

A DC conductive, low RF/microwave loss titanium oxide ceramic provides, at room temperature, a bulk DC resistivity of less than 1×10 11 ohm-meters and an RF loss tangent of less than 2×10 −4 at 7.5 GHz and less than 2×10 −5 at 650 MHz. The resistivity is reduced by oxygen vacancies and associated Ti 3+ and/or Ti 4+ centers created by sintering in an atmosphere containing only between 0.01% and 0.1% oxygen. The reduced resistivity prevents DC charge buildup, while the low loss tangent provides good RF/microwave transparency and low losses. The ceramic is suitable for forming RF windows, electron gun cathode insulators, dielectrics, and other components. An exemplary Mg 2 TiO 4 —MgTiO 3 embodiment includes mixing, grinding, pre-sintering in air, and pressing 99.95% pure MgO and TiO 2 powders, re-sintering in air at 1400° C.-1500° C. to reduce porosity, and sintering at 1350° C.-1450° C. for 4 hours in an 0.05% oxygen and 99.05% nitrogen atmosphere.

Kanareykin, Alexei↗

DOE OSTI2022

Antiferromagnetic excitonic insulator state in Sr3Ir2O7

Abstract Excitonic insulators are usually considered to form via the condensation of a soft charge mode of bound electron-hole pairs. This, however, presumes that the soft exciton is of spin-singlet character. Early theoretical considerations have also predicted a very distinct scenario, in which the condensation of magnetic excitons results in an antiferromagnetic excitonic insulator state. Here we report resonant inelastic x-ray scattering (RIXS) measurements of Sr 3 Ir 2 O 7 . By isolating the longitudinal component of the spectra, we identify a magnetic mode that is well-defined at the magnetic and structural Brillouin zone centers, but which merges with the electronic continuum in between these high symmetry points and which decays upon heating concurrent with a decrease in the material’s resistivity. We show that a bilayer Hubbard model, in which electron-hole pairs are bound by exchange interactions, consistently explains all the electronic and magnetic properties of Sr 3 Ir 2 O 7 indicating that this material is a realization of the long-predicted antiferromagnetic excitonic insulator phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Magnetic polaron formation in EuZn2P2

Colossal magnetoresistance (CMR) has been observed across many Eu2+-based materials; however, its origin is not completely understood. Here we investigate the antiferromagnetic insulator EuZn2⁢P2 through single crystal x-ray diffraction, transmission electron microscopy, electrical transport, magnetization, dilatometry, and electron spin resonance measurements complemented by density functional theory calculations. Our electrical resistivity data reveal a large negative magnetoresistance, MR=[𝑅⁡(𝐻)−𝑅⁡(0)]/𝑅⁡(0), that reaches MR=−99.7% at 9 T near the antiferromagnetic ordering temperature 𝑇𝑁=23K. Dilatometry measurements show an accompanying field-induced lattice strain. Additionally, Eu2+ electron spin resonance reveals a strong ferromagnetic exchange interaction between Eu2+ and conduction electrons. Our experimental results in EuZn2⁢P2 are consistent with a magnetic polaron scenario and suggest magnetic polaron formation as a prevailing explanation of CMR in Eu2+-based compounds.

Cook, Matt [ORNL] (ORCID:0000000288777505)↗

DOE OSTI2021

Pressure-Induced Insulator–Metal Transition in Two-Dimensional Mott Insulator NiPS 3

The pressure-induced insulator to metal transition (IMT) of layered magnetic nickel phosphorous tri-sulfide NiPS 3 was studied in-situ under quasi-uniaxial conditions by means of electrical resistance (R) and X-ray diffraction (XRD) measurements. This sluggish transition is shown to occur at 35 GPa. Transport measurements show no evidence of superconductivity to the lowest measured temperature (~2 K). The structure results presented here differ from earlier in-situ work that subjected the sample to a different pressure state, suggesting that in NiPS 3 the phase stability fields are highly dependent on strain. Furthermore, it is suggested that careful control of the strain is essential when studying the electronic and magnetic properties of layered van der Waals solids.

36 MATERIALS SCIENCE↗

NASA NTRS1984

Pre-stressed thermal protection systems

A hexagonal protective and high temperature resistant system for the Space Shuttle Orbiter consists of a multiplicity of pockets formed by hexagonally oriented spacer bars secured on the vehicle substructure. A packing of low density insulating batt material 18 in each pocket, and a thin protective panel of laterally resilient advanced carbon-carbon material surmounting the peripherals bars and packing. Each panel has three stepped or offset lips on contiguous edges. At the center of each pocket is a fully insulated stanchion secured to and connecting the substructure and panel for flexing the panel toward the substructure and thereby prestressing the panel and forcing the panel edges firmly against the spacer bars.

Dunn, T. J.↗

NASA NTRS1990

The mechanical stability of polyimide films at high pH

Polyimide insulated electrical wire has been widely used in the aerospace industry in commercial, military, and to a lesser degree, general aviation aircraft since the early 1970s. Wiring failures linked to insulation damage have drawn much attention in the media and concerns have developed regarding the long term stability and safety of polyimide insulated electrical wire. The mechanical durability and chemical stability of polyimide insulated wire are affected by hydrolysis, notch propagation, wet and dry arc tracking, topcoat flaking, and degradation due to high pH fluids. Several polyimides were selected for evaluation for resistance to degradation by various aqueous alkaline solutions. The polyimides under evaluation include commercially available films such as KAPTON (tradename), APICAL (tradename), LARC-TPI, and UPILEX (tradename) R and S, as well as a number of experimental films prepared at NASA-Langley. Material properties investigated include viscosity, solubility, moisture absorption, glass transition temperature, dielectric constant, and mechanical properties before and after exposure to various conditions.

Croall, Catharine I.↗

NASA NTRS1999

Thermal/environmental barrier coating system for silicon-based materials

A coating system for a substrate containing a silicon-based material, such as silicon carbide-containing ceramic matrix materials containing silicon carbide and used to form articles exposed to high temperatures, including the hostile thermal environment of a gas turbine engine. The coating system includes a layer of barium strontium aluminosilicate (BSAS) as a bond coat for a thermal-insulating top coat. As a bond coat, the BSAS layer serves to adhere the top coat to a SiC-containing substrate. The BSAS bond coat exhibits sufficient environmental resistance such that, if the top coat should spall, the BSAS bond coat continues to provide a level of environmental protection to the underlying SiC-containing substrate.

Spitsberg, Irene T.↗

DOE OSTI2022

Electron Doping-Induced Metal–Insulator Transition in LaNiO 3 and Memory Devices

LaNiO 3 (LNO) is the only rare-earth nickelate that does not undergo a temperature-driven insulator-metal transition. Here, we report the successful deposition of epitaxial LNO thin films on LaAlO 3 substrates by a chemical solution deposition method. We report a metal-insulator transition driven by electron doping from hydrogen using catalytic Pd electrodes. A series of in-plane devices with LNO thin films and Pd-Au as the two working terminals were designed and fabricated by photolithography. Further, we report their resistance switching behavior and synaptic multiresistance states under voltage pulses. The results demonstrate the universality of electron doping-driven phase transitions in the rare-earth nickelates and their relevance to emerging memory and computing technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2012

Calculating the Lightning Protection System Downconductors' Grounding Resistance at Launch Complex 39B, Kennedy Space Center

A new Lightning Protection System (LPS) was designed and built at Launch Complex 39B (LC39B), at the Kennedy Space Center (KSC), Florida, which consists of a catenary wire system (at a height of about 181 meters above ground level) supported by three insulators installed atop three towers in a triangular configuration. Nine downconductors (each about 250 meters long) are connected to the catenary wire system. Each downconductor is connected to a 7.62-meter-radius circular counterpoise conductor with six equally spaced, 6-meter-long vertical grounding rods. Grounding requirements at LC39B call for all underground and aboveground metallic piping, enclosures, raceways, and cable trays, within 7.62 meters of the counterpoise, to be bonded to the counterpoise, which results in a complex interconnected grounding system, given the many metallic piping, raceways, and cable trays that run in multiple directions around LC39B. The complexity of this grounding system makes the fall-of-potential method, which uses multiple metallic rods or stakes, unsuitable for measuring the grounding impedances of the downconductors. To calculate the grounding impedance of the downconductors, an Earth Ground Clamp (EGC) (a stakeless device for measuring grounding impedance) and an Alternative Transient Program (ATP) model of the LPS are used. The EGC is used to measure the loop impedance plus the grounding impedance of each downconductor, and the ATP model is used to calculate the loop impedance of each downconductor circuit. The grounding resistance of the downconductors is then calculated by subtracting the ATP calculated loop impedances from the EGC measurements.

Mata, Carlos T.↗

NASA NTRS1979

Non-flammable polyimide materials for commercial application

Thermally-stable, fire-resistant polyimide foams developed for use as fire protection in aircraft, spacecraft and ground applications are presented. Polyimide precursors, synthesized by the reaction of 3, 3', 4, 4'-benzophenone tetracarboxylic acid dianhydride with a mixture of two diamines, can be processed into foams by indirect or direct heating techniques. Flexible resilient foams and thermal acoustical foams produced by the microwave heating of polyimide precursors are shown to conform to requirements for aircraft seating foams and thermal and acoustical insulation materials, respectively. Rigid polyimide foams reinforced by carbon mat, chopped carbon mat and chopped glass strand fillers and prepared by the microwave heating of a continuous mat, followed by its compression, or by filling a honeycomb structure with low density foam, are found to exhibit outstanding fire resistance and have mechanical properties approaching those desired for structural materials.

Gagliani, J.↗