Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ice cloud models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Ames Contrail Simulation Model: Modeling Aviation Induced Contrails and the Computation of Contrail Radiative Forcing Using Air Traffic Data

NASA is developing traffic flow management strategies to reduce the impact of aviation on climate and improve efficiency of aircraft routes in the presence of limited airport and airspace capacity constraints, which are partly due to convective weather and natural calamities. Development of Strategic Traffic Flow Management (STFM) requires models of aircraft emissions and contrails, and models of their effect on climate. There is extensive literature on the modeling of contrails and the Radiative Forcing (RF) associated with contrails. This report captures the latest NASA developments in this research area and describes the integrated modeling, analysis, and software development to support STFM. Aircraft contrails are long, thin and often linear clouds triggered by aircraft engine exhausts in the high-altitude ice-saturated atmosphere. Contrails, similar to that of natural cirrus clouds, can impact global climate by reflecting shortwave radiation and trapping longwave radiation. Recent studies from the Intergovernmental Panel on Climate Change (IPCC) have shown that aircraft contrails are estimated to have greater impact on global warming than aircraft CO 2 emissions. The Ames Contrail Simulation Model (ACSM) presented in this report simulates the full life cycle of aircraft contrails, including their formation, dynamic evolution, and dissipation, and calculates the associated RF with actual meteorological and air traffic data. ACSM combines models from previous studies that focus on contrail formation and persistence based on the Schmidt-Appleman theoretical criteria, and it incorporates elements of cloud dynamics, microphysics, and climate modeling found in other surveyed contrail models, while also making adjustment for improved computational efficiency. In addition, ACSM is integrated with NASA's state-of-the-art flight simulation software for rapid assessment of aircraft contrail impacts. Applications include assessments of long-term global climate impact resulting from aviation-induced contrails and the design of optimal contrail-mitigation aircraft operation strategies.

aviation contrails↗

Sensitivity of Precipitation Processes to Microphysics and Resolution in a Cloud Resolving Model

The Goddard Cumulus Ensemble (GCE) model examines the impact of various microphysical schemes, and vertical and horizontal resolution in the development, intensity and rainfall associated with mesoscale convective systems, idealized hurricanes and an ensemble of clouds. The model variables include horizontal and vertical velocities, potential temperature, perturbation pressure, turbulent kinetic energy, and mixing rations of all water phases (vapor, liquid and ice). The major characteristics of the GCE model are the explicit representation of warm rain and ice microphysical processes, and their complex interactions with solar and infrared radiative transfer processes and with surface processes. For idealized hurricanes, an axisymmetric version of the GCE model was developed and used to simulate the tropical cyclogenesis process using both a Rankin vortex and saturated air within a specified radius as initial conditions. For mesoscale convective systems, the 3-D version of the GCE model was use to simulate squall lines that developed in the western Pacific, South China Sea, eastern Atlantic, South America and central U.S. FOr the cloud ensemble, the GCE model was integrated for several days in order to have a good sampling of cloud statistics. In this paper, the sensitivities of hurricane intensity to various microphysical processes and model grid resolutio will be examined. This will be mainly achieved by performing sensitivity tests using various horizontal (from 1-to 5-km) and vertical resolutions (from 20- to 200-m in the lower troposphere to 200- to 500m in the middle and upper troposphere). Sensitivity test using various microphysical schemes (warm rain only, and three ice with either graupel or hail) will also be performed. The thermodynamic and water budget associated with various types of precipitation systems will also be evaluated. The budgets will be calculated for different regions (i.e., convective and stratiform regions).

Tao, Wei-Kuo↗

Possible Mechanisms for Turbofan Engine Ice Crystal Icing at High Altitude

A thermodynamic model is presented to describe possible mechanisms of ice formation on unheated surfaces inside a turbofan engine compression system from fully glaciated ice crystal clouds often formed at high altitude near deep convective weather systems. It is shown from the analysis that generally there could be two distinct types of ice formation: (1) when the "surface freezing fraction" is in the range of 0 to 1, dominated by the freezing of water melt from fully or partially melted ice crystals, the ice structure is formed from accretion with strong adhesion to the surface, and (2) when the "surface melting fraction" is the range of 0 to 1, dominated by the further melting of ice crystals, the ice structure is formed from accumulation of un-melted ice crystals with relatively weak bonding to the surface. The model captures important qualitative trends of the fundamental ice-crystal icing phenomenon reported earlier1,2 from the research collaboration work by NASA and the National Research Council (NRC) of Canada. Further, preliminary analysis of test data from the 2013 full scale turbofan engine ice crystal icing test3 conducted in the NASA Glenn Propulsion Systems Laboratory (PSL) has also suggested that (1) both types of ice formation occurred during the test, and (2) the model has captured some important qualitative trend of turning on (or off) the ice crystal ice formation process in the tested engine low pressure compressor (LPC) targeted area under different icing conditions that ultimately would lead to (or suppress) an engine core roll back (RB) event.

Crystal Icing↗

Possible Mechanisms for Turbofan Engine Ice Crystal Icing at High Altitude

A thermodynamic model is presented to describe possible mechanisms of ice formation on unheated surfaces inside a turbofan engine compression system from fully glaciated ice crystal clouds often formed at high altitude near deep convective weather systems. It is shown from the analysis that generally there could be two distinct types of ice formation: (1) when the "surface freezing fraction" is in the range of 0 to 1, dominated by the freezing of water melt from fully or partially melted ice crystals, the ice structure is formed from accretion with strong adhesion to the surface, and (2) when the "surface melting fraction" is the range of 0 to 1, dominated by the further melting of ice crystals, the ice structure is formed from accumulation of un-melted ice crystals with relatively weak bonding to the surface. The model captures important qualitative trends of the fundamental ice-crystal icing phenomenon reported earlier (Refs. 1 and 2) from the research collaboration work by NASA and the National Research Council (NRC) of Canada. Further, preliminary analysis of test data from the 2013 full scale turbofan engine ice crystal icing test (Ref. 3) conducted in the NASA Glenn Propulsion Systems Laboratory (PSL) has also suggested that (1) both types of ice formation occurred during the test, and (2) the model has captured some important qualitative trend of turning on (or off) the ice crystal ice formation process in the tested engine low pressure compressor (LPC) targeted area under different icing conditions that ultimately would lead to (or suppress) an engine core roll back (RB) event.

Crystal Icing↗

Sensitivity of Precipitation Processes to Microphysics and Resolution in a Cloud-Resolving Model

The Goddard Cumulus Ensemble (GCE) model is used to examine the impact of various microphysical schemes, and vertical and horizontal resolution on the development, intensity and rainfall associated with mesoscale convective systems, idealized hurricanes and an ensemble of clouds. The model variables include horizontal and vertical velocities, potential temperature, perturbation pressure, turbulent kinetic energy, and mixing ratios of all water phases (vapor, liquid, and ice). The major characteristics of the GCE model are the explicit representation of warm rain and ice microphysical processes, and their complex interactions with solar and infrared radiative transfer processes, and with surface processes. For idealized hurricane, an axisymmetric version of the GCE model was developed and used successfully to simulate the tropical cyclogenesis process using both a Rankin vortex and saturated air within a specified radius as initial conditions. For mesoscale convective systems, the 3-D version of the GCE model was used to simulate squall lines that developed in the western Pacific, South China Sea, eastern Atlantic, South America and central U.S. For the cloud ensemble, the GCE model was integrated for several days in order to have good sampling of cloud statistics. In this paper, the sensitivities of hurricane intensity to various microphysical processes and model grid resolution will be examined. This will be mainly achieved by performing sensitivity tests using various horizontal (from 1- to 5-kilometers) and vertical resolutions (from 20- to 200-meters in the lower troposphere to 200- to 500-m in the middle and upper troposphere). Sensitivity tests using various microphysical schemes (warm rain only, and three ice with either graupel or hail) will also be performed. The PBL and diurnal variation of precipitation processes will also be evaluated. The budgets will be calculated for different regions (i.e., convective and stratiform regions).

Tao, Wei-Kao↗

The Area Coverage of Geophysical Fields as a Function of Sensor Field-of View

In many remote sensing studies of geophysical fields such as clouds, land cover, or sea ice characteristics, the fractional area coverage of the field in an image is estimated as the proportion of pixels that have the characteristic of interest (i.e., are part of the field) as determined by some thresholding operation. The effect of sensor field-of-view on this estimate is examined by modeling the unknown distribution of subpixel area fraction with the beta distribution, whose two parameters depend upon the true fractional area coverage, the pixel size, and the spatial structure of the geophysical field. Since it is often not possible to relate digital number, reflectance, or temperature to subpixel area fraction, the statistical models described are used to determine the effect of pixel size and thresholding operations on the estimate of area fraction for hypothetical geophysical fields. Examples are given for simulated cumuliform clouds and linear openings in sea ice, whose spatial structures are described by an exponential autocovariance function. It is shown that the rate and direction of change in total area fraction with changing pixel size depends on the true area fraction, the spatial structure, and the thresholding operation used.

Key, Jeffrey R.↗

Nudging allows direct evaluation of coupled climate models with in situ observations: a case study from the MOSAiC expedition

Comparing the output of general circulation models to observations is essential for assessing and improving the quality of models. While numerical weather prediction models are routinely assessed against a large array of observations, comparing climate models and observations usually requires long time series to build robust statistics. Here, we show that by nudging the large-scale atmospheric circulation in coupled climate models, model output can be compared to local observations for individual days. We illustrate this for three climate models during a period in April 2020 when a warm air intrusion reached the MOSAiC (Multidisciplinary drifting Observatory for the Study of Arctic Climate) expedition in the central Arctic. Radiosondes, cloud remote sensing and surface flux observations from the MOSAiC expedition serve as reference observations. The climate models AWI-CM1/ECHAM and AWI-CM3/IFS miss the diurnal cycle of surface temperature in spring, likely because both models assume the snowpack on ice to have a uniform temperature. CAM6, a model that uses three layers to represent snow temperature, represents the diurnal cycle more realistically. During a cold and dry period with pervasive thin mixed-phase clouds, AWI-CM1/ECHAM only produces partial cloud cover and overestimates downwelling shortwave radiation at the surface. AWI-CM3/IFS produces a closed cloud cover but misses cloud liquid water. Our results show that nudging the large-scale circulation to the observed state allows a meaningful comparison of climate model output even to short-term observational campaigns. We suggest that nudging can simplify and accelerate the pathway from observations to climate model improvements and substantially extends the range of observations suitable for model evaluation.

54 ENVIRONMENTAL SCIENCES↗

Evaluation of a High-Resolution Numerical Weather Prediction Model’s Simulated Clouds Using Observations from CloudSat, GOES-13 and in Situ Aircraft

This study aimed to assess tropical cloud properties predicted by Environment and Climate Change Canada’s Global Environmental Multiscale (GEM)modelwhen run with the Milbrandt–Yau double-moment cloud microphysical scheme and one-way nesting that culminated at a (∼300 km)2 inner domain with 0.25 km horizontal grid spacing. The assessment utilized satellite and in situ data collected during the High Ice Water Content (HIWC) and High Altitude Ice Crystals (HAIC) projects for a mesoscale convective system on 16May 2015 over French Guiana.Data fromCloud- Sat’s cloud-profiling radar and GOES-13’s imager were compared to data either simulated directly by GEM or produced by operating on GEM’s cloud data with both the CFMIP (Cloud Feedback Model Intercomparison Project) Observation Simulator Package (COSP) instrument simulator and a three-dimensional Monte Carlo solar radiative transfer model. In situ observations were made from research aircraft – Canada’s National Research Council Convair-580 and the French SAFIRE Falcon-20 – whose flight paths were aligned with CloudSat’s ground-track. Spatial and temporal shifts of clouds simulated by GEM compared well to GOES-13 imagery. There are, however, differences between simulated and observed amounts of high and low cloud. While GEM did well at predicting ranges of ice-water content (IWC) near 11 km altitude (Falcon-20), it produces too much graupel and snow near 7 km (Convair-580). This produced large differences between CloudSat’s and COSP-generated radar reflectivities and two-way attenuations. On the other hand, CloudSat’s inferred values of IWC agree well with in situ samples at both altitudes. Generally, GEM’s visible reflectances exceeded GOES-13’s on account of having produced too much low-level liquid cloud. It is expected that GEM’s disproportioning of cloud hydrometeors will improve once it includes a better representation of secondary ice production.

Qu, Zhipeng↗

Assessing Cloud and Precipitation Properties on Temporal and Spatial Scales Using LASSO Simulations over ENA

Low clouds and precipitation representation remain a major source of uncertainty in Earth System Models (ESMs), particularly due to challenges in representing their sub-grid variability and scale-dependent sampling. This study evaluates the performance of preliminary simulations from the Large-Eddy Simulation (LES) ARM Symbiotic Simulation and Observation (LASSO) project over the Eastern North Atlantic (ENA), with a focus on liquid water path (LWP), ice water path (IWP), cloud fraction (CF), and surface precipitation simulated across closed-cell, open-cell, and transitional cloud regimes. Using LES (100 m horizontal grid spacing) driven by ERA5 and MERRA-2 reanalyses, we assess the representativeness of ground-based point observations by analyzing their correspondence to model-resolved spatial and temporal means. Results suggest that observational sampling of at least 6 hours is required to achieve consistency with domain-scale averages, in particular for observations that exhibit pronounced sub-grid heterogeneity, such as precipitation. ERA5-forced simulations exhibit improved spatial coherence and agreement with domain-averaged quantities when compared to MERRA-2 runs, with performance discrepancies largest for convective cloud conditions due to differences in forcing fidelity and temporal resolution. These findings highlight the importance of regime-aware model evaluation strategies and potentially demonstrate how LES can inform observation-model comparison practices and the development of cloud and precipitation parameterizations in ESMs.

Liang, Jiakun [University of Hawai'i at Manoa] (OR↗

Surface and Atmospheric Contributions to Passive Microwave Brightness Temperatures

Physically-based passive microwave precipitation retrieval algorithms require a set of relationships between satellite observed brightness temperatures (TB) and the physical state of the underlying atmosphere and surface. These relationships are typically non-linear, such that inversions are ill-posed especially over variable land surfaces. In order to better understand these relationships, this work presents a theoretical analysis using brightness temperature weighting functions to quantify the percentage of the TB resulting from absorption/emission/reflection from the surface, absorption/emission/scattering by liquid and frozen hydrometeors in the cloud, the emission from atmospheric water vapor, and other contributors. The results are presented for frequencies from 10 to 874 GHz and for several individual precipitation profiles as well as for three cloud resolving model simulations of falling snow. As expected, low frequency channels (<89 GHz) respond to liquid hydrometeors and the surface, while the higher frequency channels become increasingly sensitive to ice hydrometeors and the water vapor sounding channels react to water vapor in the atmosphere. Low emissivity surfaces (water and snow-covered land) permit energy downwelling from clouds to be reflected at the surface thereby increasing the percentage of the TB resulting from the hydrometeors. The slant path at a 53deg viewing angle increases the hydrometeor contributions relative to nadir viewing channels and show sensitivity to surface polarization effects. The TB percentage information presented in this paper answers questions about the relative contributions to the brightness temperatures and provides a key piece of information required to develop and improve precipitation retrievals over land surfaces.

Gail Skofronick-Jackson↗

An Aerosol Physical Chemistry Model for the Upper Troposphere

This report is the final report for the Cooperative Agreement NCC2-1000. The tasks outlined in the various proposals are: (1) Development of an aerosol chemistry model; (2) Utilization of satellite measurements of trace gases along with analysis of temperatures and dynamic conditions to understand ice cloud formation, dehydration and sedimentation in the winter polar regions; (3) Comparison of the HALOE and SAGE II time dependencies of the Pinatubo aerosol decay. The publications are attached.

Lin, Jin-Sheng↗

Using Field and Satellite Measurements to Improve Snow and Riming Processes in Cloud Resolving Models

The representation of clouds in climate and weather models is a driver in forecast uncertainty. Cloud microphysics parameterizations are challenged by having to represent a diverse range of ice species. Key characteristics of predicted ice species include habit and fall speed, and complex interactions that result from mixed-phased processes like riming. Our proposed activity leverages Global Precipitation Measurement (GPM) Mission ground validation studies to improve parameterizations

Colle, Brian A.↗

NASA Icing Research Update 2024

This presentation summarizes NASA’s current icing research portfolio for an invited talk on August 1, 2024, at the AIAA Aviation Forum and Exposition. The presentation overviews NASA facilities, computational tools, and latest research. This research is categorized as application focused research, atmospheric characterization, and fundamental research / capability improvement. The application focused research includes (1) the Transonic Truss Brace Wing, (2) High Lift Common Research Model, (3) Advanced Air Mobility, and (4) Efficient Quiet Integrated Propulsor. The atmospheric characterization work includes High Ice Water Content Flight Research, while the fundamental research / capability improvement area includes (1) the Simulated Inter-compressor Duct Research Model, (2) Characterization of Low Ice Adhesion Materials, (3) Collection Efficiency Measurements, (4) Impedance Based Ice/ Water Sensor, (5) Tomography for Cloud Uniformity in the Icing Research Tunnel, and (6) Supercooled Large Drop Research. Finally, the presentation summarizes collaboration and partnership opportunities with NASA.

Icing↗

Global Sensitivity Analysis Using the Ultra‐Low Resolution Energy Exascale Earth System Model

Abstract For decades, Arctic temperatures have increased twice as fast as average global temperatures. As a first step toward quantifying parametric uncertainty in Arctic climate, we performed a variance‐based global sensitivity analysis (GSA) using a fully coupled, ultra‐low resolution (ULR) configuration of version 1 of the U.S. Department of Energy's Energy Exascale Earth System Model (E3SMv1). Specifically, we quantified the sensitivity of six quantities of interests (QOIs), which characterize changes in Arctic climate over a 75 year period, to uncertainties in nine model parameters spanning the sea ice, atmosphere, and ocean components of E3SMv1. Sensitivity indices for each QOI were computed with a Gaussian process emulator using 139 random realizations of the random parameters and fixed preindustrial forcing. Uncertainties in the atmospheric parameters in the Cloud Layers Unified by Binormals (CLUBB) scheme were found to have the most impact on sea ice status and the larger Arctic climate. Our results demonstrate the importance of conducting sensitivity analyses with fully coupled climate models. The ULR configuration makes such studies computationally feasible today due to its low computational cost. When advances in computational power and modeling algorithms enable the tractable use of higher‐resolution models, our results will provide a baseline that can quantify the impact of model resolution on the accuracy of sensitivity indices. Moreover, the confidence intervals provided by our study, which we used to quantify the impact of the number of model evaluations on the accuracy of sensitivity estimates, have the potential to inform the computational resources needed for future sensitivity studies.

54 ENVIRONMENTAL SCIENCES↗

Why is the north polar cap on Mars different than the south polar cap?

One of the most puzzling mysteries about the planet Mars is the hemispherical asymmetry in the polar caps. Every spring the seasonal polar cap of CO2 recedes until the end of summer, when only a small part, the residual polar cap, remains. During the year that Viking observed Mars, the residual polar cap was composed of water ice in the northern hemisphere but was primarily carbon dioxide ice in the southern hemisphere. Scientists have sought to explain this asymmetry by modeling observations of the latitudinal recession of the polar cap and seasonal variations in atmospheric pressure (since the seasonal polar caps are primarily frozen atmosphere, they are directly related to changes in atmospheric mass). These models reproduce most aspects of the observed annual variation in atmospheric pressure fairly accurately. Furthermore, the predicted latitudinal recession of the northern polar cap in the spring agrees well with observations, including the fact that the CO2 ice is predicted to completely sublime away. However, these models all predict that the carbon dioxide ice will also sublime away during the summer in the southern hemisphere, unlike what is observed. This paper will show how the radiative effects of ozone, clouds, airborne dust, light penetration into and through the polar cap, and the dependence of albedo on solar zenith angle affect CO2 ice formation and sublimation, and how they help explain the hemispherical asymmetry in the residual polar caps. These effects have not been studied with prior polar cap models.

Lindner, Bernhard Lee↗

Sensitivity of Precipitation Processes to Microphysics and Resolution in a Cloud-Resolving Model

The Goddard Cumulus Ensemble (GCE) model is used to examine the impact of various microphysical schemes, and vertical and horizontal resolution on the development, intensity and rainfall associated with mesoscale convective systems, idealized hurricanes and an ensemble of clouds. The model variables include horizontal and vertical velocities, potential temperature, perturbation pressure, turbulent kinetic energy, and mixing ratios of all water phases (vapor, liquid, and ice). The major characteristics of the GCE model are the explicit representation of warm rain and ice microphysical processes, and their complex interactions with solar and infrared radiative transfer processes, and with surface processes. For idealized hurricane, an axisymmetric version of the GCE model was developed and used successfully to simulate the tropical cyclogenesis process using both a Rankin vortex and saturated air within a specified radius as initial conditions. For mesoscale convective systems, the 3-D version of the GCE model was used to simulate squall lines that developed in the western Pacific, eastern Atlantic and central US. For the cloud ensemble, the GCE model was integrated for several days in order to have good sampling of cloud statistics. In this paper, the sensitivities of hurricane intensity to various microphysical processes and model grid resolution will be examined.

Tao, Wei-Kuo↗

Sensitivity of Precipitation Processes to Microphysics and Resolution in a Cloud-resolving Model

The Goddard Cumulus Ensemble (GCE) model is used to examine the impact of various microphysical schemes, and vertical and horizontal resolution on the development, intensity and rainfall associated with mesoscale convective systems, idealized hurricanes and an ensemble of clouds. The model variables include horizontal and vertical velocities, potential temperature, perturbation pressure, turbulent kinetic energy, and mixing ratios of all water phases (vapor, liquid, and ice). The major characteristics of the GCE model are the explicit representation of warm rain and ice microphysical processes, and their complex interactions with solar and infrared radiative transfer processes. For idealized hurricane, an axisymmetric version of the GCE model was developed and used successfully to simulate the tropical cyclogenesis process using both a Rankin vortex and saturated air within a specified radius as initial conditions. For mesoscale convective systems, the 3-D version of the GCE model was used to simulate squall lines that developed in the western Pacific, South China Sea, eastern Atlantic, South America and central US. For the cloud ensemble, the GCE model was integrated for several days in order to have a good sampling of cloud statistics.

Tao, Wei-Kuo↗

The Abundances of Solid N2 and Gaseous CO2 in Interstellar Dense Molecular Clouds

We present 2338-2322 per centimeter (4.277-4.307 micrometer) infrared spectra of a number of N2-containing mixed molecular ices and demonstrate that the strength of the infrared "forbidden" band due to the N=N stretch near 2328 per centimeter (4.295 micrometer) is extremely sensitive to the composition of the ice. The strength of the 2328 per centimeter N2 fundamental is significantly enhanced relative to that of pure N2 ice when NH3, H2O, or CO2 are present, but is largely unaffected by the presence of CO, CH4 or O2. We use the laboratory data in coil junction with ISO data that probes several lines-of-sight through dense molecular clouds to place limits on the abundance of interstellar solid phase N2 and the composition of the ices. Deriving upper limits is complicated by the presence of overlapping absorptions due to CO2 gas in the clouds and, in some cases, to photospheric CO in the background star. These upper limits are just beginning to be low enough to constrain interstellar grain models and the composition of possible N2-bearing interstellar ices. We outline the search criteria that will need to be met if solid interstellar N2 is to be detected in the future. We also discuss some of the implications of the presence of warm CO2 gas along the lines-of-sight to embedded protostars and demonstrate that its presence may help resolve certain puzzles associated with the previously derived gas/solid CO2 ratios and the relative abundances of polar and nonpolar ices towards these objects. Finally, we briefly comment on the possible implications of these results for the interpretation of N2 detections on outer solar system bodies.

Sandford, Scott A.↗