SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Symmetrical fluidic device directly converts electrical signals to mechanical signals in the form of a fluid-flow parameter. This device eliminates or reduces effects of all undesirable parameters on the departure angle, leaving it a function of the controlled wall and jet temperatures.
The author has identified the following significant results. Even though nonsynchronous, the ERTS-1 imagery of November 4, 1972, showed a striking similarity to the ground truth data obtained in late August and September, 1972. The comparison of the images with ground truth data revealed that the general water circulation pattern in Lower Cook Inlet is consistent through the Fall season and that ERTS-1 images in MSS bands 4 and 5 are capable of delineating water masses with a suspended load as low as 1 mg/liter. The ERTS-1 data and the ground truth data demonstrate clearly that the coriolis effect dominates circulation in Lower Cook Inlet. The configuration of plumes in Nushagak and Kuskokwim bays further indicates the influence of the coriolis effect on the movement of sea water at high latitudes. Comparison of MSS bands 4, 5, 6, and 7 suggest MSS-1 penetration of several meters into the water column. Sea ice analysis of available imagery was exceptionally rewarding. The imagery provided a rapid method to delineate and describe the ice types apparent in the photos. The ice types ranged from newly formed grease ice to heavy flows of disintegrating shore-fast ice. Sea ice maps showing the extent of different ice zones in the Chukchi Sea are being compiled.
The author has identified the following significant results. ERTS-1 imagery has been extremely useful in understanding the tidal water movements in a large estuary such as Cook Inlet. As more imagery obtained during various tidal stages become available it appears that complex and fast changing micro-circulation patterns develop in various regions of Cook Inlet during each advancing and receding tide. More ERTS-1 synoptic imagery is needed to fully understand the effect of the approach of tidal front on the water movements in the various regions through the estuary. The conventional onboard ship data gathered during various cruises although revealed the overall circulation pattern in Cook Inlet but failed to show micro-subgyres which develop in various regions during each tide which are discernible on ther ERTS-1 imagery. Suspended load distribution in the Bering Sea during summer varies significantly. In areas of phytoplankton bloom and at the river mouths the suspended load is higher than the 1 mg/1 which is found over most areas. The influence of major rivers on temperature, salinity, and suspended load in surface water as well as at shallow depth is apparent. On the Bering shelf a strong pycnocline generally at depth 10-20 m is formed by surface fresh water flow which retains sediment in suspension over extended periods.
The magnetic perturbation patterns in the polar cap and auroral zone regions are obtained for extremely quiet days using two different techniques. It is shown that the form of the equivalent current flow pattern is extremely sensitive to the level of quietness, and that even so-called quiet days are at times disturbed by substorm activity. Certain characteristic equivalent flow not typically observed during substorms is noted in the polar cap, and this flow appears to be associated with effects of polar cap perturbations discussed by Svalgaard (1973). A region of equatorward flow at high latitudes near the dawn meridian, appears to be Hall current driven by an eastward electric field. The dayside sub-auroral zone is dominated by the Sq-current system, while the nightside shows no significant current flow in the absence of substorm activity.
Oligomers are prepared by heating solid ethylene-propylene rubber in container that retains solid and permits liquid product to flow out as it is formed. Molecular weight and viscosity of liquids can be predetermined by process temperature. Copolymers have low viscosity for given molecular weight.
Analog vibration control techniques are reviewed and are compared with digital techniques. The advantages of the digital methods over the analog methods are demonstrated. The following topics are covered: (1) methods of computer-controlled random vibration and reverberation acoustic testing; (2) methods of computer-controlled sinewave vibration testing; and (3) methods of computer-controlled shock testing. Basic concepts are stressed rather than specific techniques or equipment. General algorithms are described in the form of block diagrams and flow diagrams. Specific problems and potential problems are discussed. The material is computer sciences oriented but is kept at a level that facilitates an understanding of the basic concepts of computer-controlled induced environmental test systems.
The advantages of the digital methods over the analog vibration methods are demonstrated. The following topics are covered: (1) methods of computer-controlled random vibration and reverberation acoustic testing, (2) methods of computer-controlled sinewave vibration testing, and (3) methods of computer-controlled shock testing. General algorithms are described in the form of block diagrams and flow diagrams.
NASA developed stability and frequency response analysis techniques were applied to a dynamic blade row compression component stability model to provide a more economic approach to surge line and frequency response determination than that provided by time-dependent methods. This blade row model was linearized and the Jacobian matrix was formed. The clean-inlet-flow stability characteristics of the compressors of two J85-13 engines were predicted by applying the alternate Routh-Hurwitz stability criterion to the Jacobian matrix. The predicted surge line agreed with the clean-inlet-flow surge line predicted by the time-dependent method to a high degree except for one engine at 94% corrected speed. No satisfactory explanation of this discrepancy was found. The frequency response of the linearized system was determined by evaluating its Laplace transfer function. The results of the linearized-frequency-response analysis agree with the time-dependent results when the time-dependent inlet total-pressure and exit-flow function amplitude boundary conditions are less than 1 percent and 3 percent, respectively. The stability analysis technique was extended to a two-sector parallel compressor model with and without interstage crossflow and predictions were carried out for total-pressure distortion extents of 180 deg, 90 deg, 60 deg, and 30 deg.
The paper calculates the shock and shear deformation-induced internal energy distribution associated with a major basin-forming hypervelocity meteorite impact on the moon. The Hageman and Walsh formulation of the axisymmetric two-dimensional conservation equations in finite difference form is used, and the flow field induced upon impact of an iron meteorite traveling at 15 km/sec with a gabbroic anorthosite lunar crust is calculated for sequential time steps over a grid of hoop-shaped zones fixed in space. If an energy of 5 times 10 to the 32nd power ergs for the projectile energy is required to excavate a basin of Imbrium size, than a flow field of approximately 210 km in radius approximately 19 seconds after impact is indicated. The meteorite residue, the melt, and the ejecta are discussed, and the results are compared with the Gault and Heitowit (1963) formulation.
Steady state solutions to two time dependent partial differential systems have been obtained by the Method of Lines (MOL) and compared to those obtained by efficient standard finite difference methods: (1) Burger's equation over a finite space domain by a forward time central space explicit method, and (2) the stream function - vorticity form of viscous incompressible fluid flow in a square cavity by an alternating direction implicit (ADI) method. The standard techniques were far more computationally efficient when applicable. In the second example, converged solutions at very high Reynolds numbers were obtained by MOL, whereas solution by ADI was either unattainable or impractical. With regard to 'set up' time, solution by MOL is an attractive alternative to techniques with complicated algorithms, as much of the programming difficulty is eliminated.
The first of two articles are presented which describe and analyze the thermal performance of a vacuum tube solar collector. The assumptions and mathematical modeling are presented. The problem is reduced to the formulation of two simultaneous linear differential equations characterizing the collector thermal behavior. After applying the boundary conditions, a general solution is obtained which is found similar to the general Hottel, Whillier and Bliss form but with a complex flow factor.
Linearized theory is used to predict the unsteady flow in a supersonic cascade with subsonic axial flow velocity. A closed-form analytical solution is obtained by using a double application of the Wiener-Hopf technique. Although numerical and semianalytical solutions of this problem have already appeared in the literature, this paper contains the first completely analytical solution. It has been stated in the literature that the blade source should vanish at the infinite duct resonance condition. The present analysis shows that this does not occur. This apparent discrepancy is explained in the paper.
This article analyzes the thermal performance of a new vacuum tube solar collector. The assumptions and mathematical modeling are presented. The problem is reduced to the formulation of two simultaneous linear differential equations characterizing the collector thermal behavior. After applying the boundary conditions, a general solution is obtained which is found similar to the general Hottel, Whillier and Bliss form, but with a complex flow factor. The details of the two-dimensional thermal model of the solar collector at steady state is also presented to include the computer simulation and the performance parameterization. Comparison of the simulated performance with the manufacturer's test data showed good agreement at wide ranges of operating conditions.
High-dispersion spectra taken with the IUE are used to examine the temperature stratification of the wind of the hybrid atmosphere star Alpha TrA (K4 II). C IV emission is shown to have a line width of 150-200 km/s, with Si III and C III exhibiting 100 km/s widths. It is suggested that the line widths reflect wind expansion, with C IV formed in an extended region flowing near the wind terminal velocity of 85 km/s. It is shown that the observed line widths can be accounted for by the stellar wind theory of Hartmann and MacGregor, in which the schematic dissipation of Alfven waves drives the outflow in addition to heating the wind. The observations of the warm expanding corona in Alpha TrA suggest a continuous progression between the high temperature low-mass-flux solar wind and the winds of luminous cool stars.
The equations of centrifugally driven convection appropriate to a treatment of the transport of Io plasma in Jupiter's magnetosphere are solved for two special cases of the source distribution. The results show that, in the corotating frame of Jupiter, the mass flows outward from the source, forming spirallike streamlines. It is found that the pitch of a spiral depends on the amount of resident mass and the ionospheric conductivity and that the outflow speed depends on the size of the source region, the resident mass, and the source strength of new ions. An example of a wide source and slow outflow is presented. It is noted that, in the limit of a narrow source, the outflow is rapid and the streamlines are nearly radial.
An uncoupled constitutive model for predicting the transient response of thermal and rate dependent, inelastic material behavior is presented. The uncoupled model assumes that there is a temperature below which the total strain consists essentially of elastic and rate insensitive inelastic strains only. Above this temperature, the rate dependent inelastic strain (creep) dominates. The rate insensitive inelastic strain component is modeled in an incremental form with a yield function, flow rule and hardening law. Revisions to the hardening rule permit the model to predict temperature-dependent kinematic-isotropic hardening behavior, cyclic saturation, asymmetric stress-strain response upon stress reversal, and variable Bauschinger effect. The rate dependent inelastic strain component is modeled using a rate equation in terms of back stress, drag stress and exponent n as functions of temperature and strain. A sequence of hysteresis loops and relaxation tests are utilized to define the rate dependent inelastic strain rate. Evaluation of the model is performed by comparison with experiments involving various thermal and mechanical load histories on 5086 aluminum alloy, 304 stainless steel and Hastelloy-X.
The results of a two-dimensional spectrophotometric survey of the core regions of 11 rich clusters of galaxies are presented. A number of these clusters have spectacular optical emission line systems in their cores. Both morphologically and kinematically, the emission line regions divide into extended, 20-100 kpc systems of long linear filaments associated with the cluster core and more compact, homogeneous elongated regions associated with the dominant central cluster galaxy. It is suggested that the present results can be expected, as hot X-ray emitting gas cools in the cluster center. Luminosities almost entirely agree with expected values. The morphology of the systems can be understood if the filaments form initially in the cooling flow and, in some cases, are subsequently accreted by the central galaxy.
MIMOC calculates flow field and flame propagation in turbulent combustion tunnel. Program employs algorithm for turbulent combustion modeling described by Ghoniem, Chorin, and Oppenheim. Program used to study flow field in model combustor, formed by rearward-facing step in channel, in terms of vorticity field, velocity field, turbulent shear stresses, flame contours, and concentration field.