Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “feedstock”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Computational Fluid Dynamics Simulation of Compressible Non-Newtonian Biomass in a Compression-Screw Feeder

Compression-screw feeders play a critical role in biorefineries to transport lignocellulosic biomass feedstocks from the feeding hoppers to biomass-conversion reactors in order to pretreat and convert biomass to hydrocarbon liquid biofuels and other power and energy resources. One of the main challenges in the operation of screw feeder is plugging and jamming of compressed biomass with high concentration of insoluble solids. The focus of this paper is to numerically investigate the screw feeder at these challenging operating conditions and help with the optimization of the screw feeder design to avoid operation failure. In this work a customized CFD model based on open-source OpenFOAM package [1] was developed to simulate the concentrated biomass as a highly viscous non-Newtonian fluid in the screw feeder. The biomass is modeled as a single-phase compressible Bingham fluid with a plastic viscosity as well as a density-dependent yield stress. The compressibility formulation (pressure-dependent density) and the density-dependent yield stress formulation in the governing equations follow the suggestions from a recent study by Duncan et al. [2]. A pilot-scale hopper/screw feeding system at NREL [3] is used to compare the experimental observations with our simulation results. The auger is 280 mm long and tapered with outer diameter changing from 80 mm to 35 mm. The auger rotates from 10 to 60 rpm in a conical throat which contains anti-rotational bars. The simulations predicted the required torque for the screw feeder and the pressure increase at the exit for biomass feedstocks with various fluid viscosity properties and auger rotating speeds. The analysis of the stress forces helped to identify the critical conditions were the screw feeder excessive wear or jamming could occur.

biofuels↗
DOE OSTI2022

BETO 2021 Peer Review - FCIC Task 5 - Preprocessing

In the study of feedstock variability, this presentation specifically looks at preprocessing processes that will created well-defined and homogenous feedstock from variable biomass resources, in the quest to produce homogeneous intermediates that will be converted into market-ready products. The objective of this stage of the project is to develop science-based design and operation principles informed by TEA/LCA that result in predictable, reliable, and scalable performance of preprocessing unit operations (comminution, fractionation, deconstruction, and real-time imaging).

biomass↗
DOE OSTI2023

FCIC Task X - Project Management and Consortium Overview

The objective of the FCIC Program Management Task is to provide scientific direction and leadership to the nine participating labs, and to provide robust project management to ensure robust operational planning and execution. The FCIC directly supports the BETO portfolio by focusing on feedstock variability across the bioenergy value chain, and the Project Management Task ensures the smooth operation of the FCIC, making sure that the 9 independent projects with different objectives have a common focus - understanding and mitigating the impacts of feedstock variability across the value chain.

bioenergy↗
DOE OSTI2024

Revolutionizing Waste Management: AI-Powered Real-Time Characterization for Efficient Handling of Non-Recyclable Municipal Solid Waste

According to EPA, -300 MM tons of municipal solid waste (MSW) was available in the US as of 2018. Of that total material, nearly 50% was landfilled resulting in a significant loss for the potential to convert its energy value into cost effective and sustainable biofuels. Redirecting this material away from the landfill and into conversion ready feedstock for energy generation can directly address DOE's selling price < $2.50/GGE while securing the US national energy independence [1]. However, the paramount challenges in any rational fuel conversion strategy are understanding the chemical makeup, quality and associated calorific value of the MSW. Understanding these parameters is critical in achieving any acceptable fuel conversion and requires rapid characterization followed by accurate separation technologies. Therefore, we are proposing to address the rapid characterization by building a non-invasive, rapid, and highly accurate Artificial Intelligence (AI)-enabled spectrometric/optical approach augmented with multi-sensory information for advanced characterization of domestic heterogeneous MSW. North Carolina State University (NCSU) and the National Renewable Energy Laboratory (NREL), in partnership with strong support from the Town of Cary and IBM, Inc., will closely work together to implement this ground-breaking technology for the effective characterization of MSW for sustainable and affordable production of conversion-ready feedstocks, while solving the environment issue of planetary proportions.

artificial intelligence↗
DOE OSTI2025

R&D with NREL's Davison Circulating Riser System

The Davison circulating riser (DCR) is the National Renewable Energy Laboratory's (NREL's) pilot-scale recirculating riser reactor system. Coupled with an upstream fluid-bed pyrolysis system, it permits evaluation of catalytic cracking of biogenic feedstocks, as well as coprocessing of biogenic and fossil feedstocks in a commercially relevant pilot fluid catalytic cracker.

09 BIOMASS FUELS↗
DOE OSTI2026

Feasibility of Nitrogen as a Carrier Gas for Inconel Cold Spray in Hydropower Application

Cold spray deposition of Inconel nickel alloys has emerged as a promising strategy for mitigating cavitation erosion in hydropower facilities. Most prior developments employ helium (He) as the carrier gas because it enables high particle velocities and the formation of dense coatings. However, He is nearly two orders of magnitude more expensive than nitrogen (N2), which limits its widespread adoption in the hydropower sector. Although He-based cold spray can be justified for high value repairs, the lower cost and broad availability of N2 make it an attractive alternative. This study assesses the feasibility of N2-based cold spray of Inconel 625 powders for hydropower applications. Cavitation erosion testing shows that He-based coating exhibits cavitation resistance of ~398% relative to the 304L stainless steel (SS304L) substrate. In contrast, N2-based coating shows substantially lower cavitation resistance, reaching only ~69% of the SS304L substrate, even when higher carrier gas temperature and pressure are applied. When the Inconel 625 powder size is reduced from 44 to 22 µm under N2-based cold spray conditions, cavitation resistance increases significantly to ~148% of the SS304L substrate. Additional improvement can be obtained by incorporating fine chromium carbide powders into the feedstock, resulting in cavitation resistance of ~172% of the SS304L substrate. Overall, with optimized feedstock design, N2-based cold spray offers a practical and cost-effective approach for producing cavitation resistant coatings on hydropower components, although He-based cold spray continues to deliver higher cavitation resistance.

Wang, Tianhao↗
DOE OSTI2024

Unlocking Larger Scales and Aspect Ratios in 3D Printed Glass: Coupling Active Mixing and UV Curing for Advanced Printability and Crack Resistance

Recent developments in additive manufacturing (AM) of glass via silica-filled inks have facilitated fabrication of previously unattainable geometries and compositions. However, the maximum processable size of 15 mm limits the use of these prints in applications such as optics. A key limitation lies in the trade-off between material printability and green strength: increasing silica content in the feedstock improves crack resistance and reduces shrinkage but results in dramatic changes in viscoelastic properties that hinder flowability. Here, this paper presents a novel approach that offers expanded versatility in processable size, feedstock formulation, and printing. Described here is a direct ink writing (DIW) system coupled with an active high-shear micromixer and UV light source, capable of simultaneously printing multiple inks with a wide range of rheological properties. Choice of silica sourc, solvent, UV-curable binder, and dispersant is used to tune the ink rheology and improve printability and mechanical properties. Imparting high shear with the micromixer while UV-curing the extrudate allows for increased ink viscosities and reduced nozzle diameters, enabling printing finer feature sizes. With these advances, thin-walled high-aspect ratio structures and a crack-free glass disk measuring 44 mm in diameter are demonstrated, an increase of 3× in the greatest dimension compared to current state-of-the-art.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Hybrid Additive Manufacturing and Electric Field-Assisted Sintering of High-temperature Heat Exchangers via Sacrificial Channel Molds

A hybrid manufacturing approach, integrating additive manufacturing (AM) with powder methodology via electric field-assisted sintering (EFAS), was developed for the fabrication of high-temperature compact heat exchangers (CHX) from refractory metals. The methodology employed additively manufactured sacrificial channel molds (SCMs) as shapeholders for CHX channels, which were embedded in metal powders using EFAS. Following embedding, the SCMs were chemically dissolved to form the internal channel network. SCMs were fabricated using both digital light processing (DLP) and direct ink writing (DIW) from chemically reactive, calcium-based ceramic feedstocks with varying ratios of Al2O3 reinforcement. The microstructure, phase composition, and dissolution behavior of both as-printed and embedded SCMs were investigated. The shrinkage behavior of the SCMs embedded in refractory metals, as well as the interfacial characteristics between the SCMs and metal matrix, were studied. The results showed that the SCMs containing sufficient chemical reactive ceramics dissolved effectively before and after embedding. The as-printed SCMs retained the phase composition of their feedstocks, but the embedded SCMs containing calcium-based ceramics and Al2O3 exhibited the formation of calcium aluminates due to high temperature exposure during embedding. Most SCMs exhibited a cellular Al2O3 network filled with Ca-rich ceramics. Shrinkage after embedding was strongly dependent on SCM density, with lower density SCMs exhibiting greater shrinkage. A thin SCM-affected zone was observed at the metal matrix surface, characterized by increased porosity compared to the bulk matrix. This effect was attributed to infiltration of the SCM materials into powder particle boundaries under pressure, followed by their removal during dissolution. This study demonstrates the feasibility of manufacturing CHXs from hard-to-process refractory metals for use in harsh environments.

36 - MATERIALS SCIENCE↗
DOE OSTI2026

Understanding Depolymerization and Repolymerization Toward Repurposing Polymer Waste Into Valuable Chemicals & Materials

The versatility of synthetic polymers has led to their continual and escalating production that has accompanied mismanagement at their end-of-life. Exploring and understanding complementary avenues to repurpose plastic waste beyond traditional mechanical recycling can unlock new opportunities in providing feedstock flexibility, securing supply chains, recovering valuable materials, and enabling new valorization paths. Chemical recycling allows for the return to monomers, tailored oligomers, and polymers, even from mixed states of post-consumer waste plastics. This review article summarizes our research team's efforts on elucidating key insights surrounding plastic depolymerization and repolymerization into valorized products. We revealed organocatalyst design rules lead to highly effective and selective deconstruction of condensation polymers. The intricacies of tailoring the reaction environment to produce products of specific lengths and desired functionalities transform low-value waste feedstocks into high-performance materials with embedded circularity. Other types of polymers, including polyolefins and polyakenamers, have also been designed and converted into valuable products. There remain opportunities for further developments such as low-energy and precision depolymerization, adoption of cutting-edge small molecule transformation to access functionalized polymer scaffolds typically inaccessible otherwise, as well as precision design and understanding through the aid of advanced tools.

Galan, Nick [ORNL]↗
DOE OSTI2021

Comparative establishment and yield of bioenergy sorghum and maize following pre–emergence waterlogging

Biofuel feedstocks grown on marginal lands, such as those that experience ephemeral waterlogging, reduce interference with food agriculture. As early-season extreme precipitation events in the U.S. Midwest continue to increase, waterlogging tolerance may play an important role in the productivity of annual biofuel cropping systems. We assessed the establishment and yield of photoperiod-sensitive sorghum [Sorghum bicolor (L.) Moench] and maize (Zea mays L.) after extreme early-season rainfall events in central Illinois. We used paired sorghum and maize transects, spanning from low-lying poorly drained areas to higher better drained areas, to evaluate the response of both cropping systems throughout the 2020 growing season. Sorghum maintained 25% mean emergence rates in areas that experienced the most severe waterlogging, but maize failed to establish under the same conditions. Despite the low establishment, sorghum yields in the poorly drained areas were upwards of 50% of those found in the better drained, whereas maize yields were zero areas in the poorly drained locations. The yield compensation in sorghum resulted from increased tillering, higher productivity per stem, and subsequently higher productivity per plant, which illustrates the greater phenotypic plasticity of sorghum compared to maize. Land managers who are currently seeking to grow annual cellulosic feedstocks on soils that are vulnerable to transient soil waterlogging will likely have more success with photoperiod-sensitive bioenergy sorghum than maize.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Design and optimization of processes for recovering rare earth elements from end‐of‐life permanent magnets

Recovery of rare earth elements (REEs) from end-of-life (EOL) products represents a strategic opportunity to strengthen the domestic supply chain for rare earth elements. This work presents a superstructure-based optimization framework for finding the most economical processing pathway for different EOL rare earth permanent magnets (REPMs). The framework evaluates state-of-the-art technologies across four processing stages—disassembly, demagnetization, leaching and extraction, and precipitation and calcination—using net present value (NPV) maximization and cost of recovery (COR) minimization objectives. A novel bottom-up costing framework for hydrogen decrepitation is also introduced. Two feedstocks were considered: REPMs from EOL hard disk drives (HDDs), and electric and hybrid electric vehicles (EVs and HEVs). While HDD recycling proved unprofitable due to limited feedstock availability, EVs/HEVs were profitable across a range of parameters and cost estimates. Therefore, our findings suggest that the proposed EOL EV/HEV recycling process may be economical and is worthy of further investigation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Supply Chain Energy and Greenhouse Gas Analysis Using the Materials Flows Through Industry (MFI) Tool: Examination of Alternative Technology Scenarios for the U.S. Chemical Sector

Chemical manufacturing is a large and diverse sector of the U.S. economy, with products, fuels, and a wide assortment of materials used daily by both the public and businesses. Currently, several of the largest volume chemicals produced in the United States rely on fossil fuels as a feedstock, energy source, or both. The list of chemicals includes steam cracking products such as ethylene, propylene, benzene, and xylenes as well as products such as ammonia and methanol. The focus for this work is on platform chemicals that are both produced in the largest volume and have a high potential for subsequent processing into more specialized products. In this study, we explore several new pathways that reduce the overall energy consumption and greenhouse gas (GHG) emissions for each product. These pathways include energy efficiency measures applied to existing production methods, the use of bio‐based fuels and/or feedstocks as new production methods, and electrification of high‐energy‐input stages within current production methods. Scenarios for energy demand and GHG reduction were conducted with the National Renewable Energy Laboratory's Materials Flows through Industry tool. Projections of the energy demand and GHG emissions in 2030 and 2050 are included, using grid composition projections from the NREL ReEDS model. The alternative scenarios selected showcase the effect of realistic changes the industry could make, focusing on technologies with a high level of technical readiness.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

An overview of switchgrass phenotypes variability across diverse populations and their implications for conversion to fuels

There have been substantial changes to the human lifestyle over the past two centuries, which are reflected in the amount of fuel we consume to power our day-to-day needs. The way we use these resources has indeed manifested in an overdependence on non-renewable energy sources, such as coal and petroleum, for generating electricity and powering our transportation needs. There is a pressing need to explore alternative ways of fueling our current lifestyle without impacting the environment. Biofuels have long been touted as a sustainable solution for use as drop-in fuels in aviation and maritime applications. Still, they have yet to establish themselves as a competitive commercial alternative, necessitating further research and development. Lignocellulosic biomass is an underutilized resource that is widely accessible for the commercial processing of renewable biofuels. Bioenergy crops, such as switchgrass (Panicum virgatum L.), which can be cultivated on marginal lands with minimal competition for agricultural land, are an ideal and promising candidate for bulk-scale biofuel synthesis. Over the past 30 years, significant progress has been made in breeding and genetically modifying these grasses to enhance their drought resilience and subsequent yields. However, discrepancies in biomass composition can lead to irregular feedstocks for downstream operations, which in turn affect overall production targets for biofuels. Here, this review examines the variability in switchgrass (P. virgatum L.) biomass phenotypes across diverse populations and plant components, and their implications for biofuel conversion. The study highlights significant variations in biomass yield, composition, and cell wall chemistry both between switchgrass genotypes and within individual cultivars. Key findings include differences in cellulose, hemicellulose, and lignin content between leaves and stems, which affect biomass digestibility and ethanol yield. The review also discusses the impact of lignin chemistry, particularly the syringyl/guaicyl (S/G) ratio, on the efficiency of biomass saccharification. Furthermore, it explores how these variations respond differently to various pretreatment techniques, affecting overall biofuel production. We conclude that understanding and quantifying this variability is crucial for optimizing switchgrass as a feedstock for commercial biofuel production, thereby potentially addressing the pressing need for sustainable energy sources in sectors such as aviation.

Kousika, Rohit [Univ. of Tennessee, Knoxville, TN ↗
DOE OSTI2024

Production of Biomass–Derived p –Hydroxybenzamide: Synthesis of p –Aminophenol and Paracetamol

As we work to transition the modern society that is based on non-renewable chemical feedstocks to a post-modern society built around renewable sources of energy, fuels, and chemicals, there is a need to identify the renewable resources and processes for converting them to platform chemicals. Herein, we explore a strategy for utilizing the p-hydroxybenzoate in biomass feedstocks (e.g., poplar and palm trees) and converting it into a portfolio of commodity chemicals. The targeted bio-derived product in the first processing stage is p-hydroxybenzamide produced from p-hydroxybenzoate esters found in the plant. In the second stage a continuous reaction process converts the p-hydroxybenzamide to p-aminophenol via the Hofmann rearrangement and recovers the unreacted p-hydroxybenzamide. In the third stage the p-aminophenol can be acetylated to form paracetamol, which is readily isolated by liquid/liquid extraction at >95 % purity and an overall p-hydroxybenzamide-to-paracetamol process yield of ~90 %. We explore how utilization of protecting groups alters the challenges in this process and expands the portfolio of possible products to include p-(methoxymethoxy)aniline and N-acetyl-p-(methoxymethoxy)aniline. These target compounds could become value-added renewably-sourced platform chemicals that could be used to produce biodegradable plastics, pigments, and pharmaceuticals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Genetically engineered poplar wood effectively enhances the efficiency of deep eutectic solvent-mediated one-pot processing

Although lignocellulosic biomass is a renewable resource with the potential to replace fossil-derived fuels and chemicals, its recalcitrance, largely due to lignin, limits its utilization. Recent advancements in genetic engineering have produced transgenic trees with reduced lignin content and/or modified lignin structure without compromising growth traits. Here, three engineered poplar varieties are evaluated as feedstocks using a biocompatible one-pot deep eutectic solvent-mediated process that integrates biomass fractionation and enzymatic saccharification within a single reactor, eliminating water washing and reconditioning. All transgenic poplars exhibit higher fermentable sugar yields than wild-type (WT) trees. Notably, QsuB poplar, incorporating 3,4-dihydroxybenzoate in lignin, achieves the highest glucose conversion yield of 91.3% (vs. 73.0% from WT). AT5 and MdCHS3 poplars, incorporating ferulate esters and naringenin, also demonstrate improved glucose yields (86.7 and 84.7%, respectively), confirming reduced biomass recalcitrance. Additionally, residual lignins are valorized via hydrogenolysis into phenolic compounds, with comparable alkylphenol production across all lines. These findings demonstrate that the transgenic poplar lines not only serve as superior feedstocks for sugar conversion but also provide a rich resource for phenolic compound production, enhancing the operational and economic viability of integrated biorefinery processes.

biomasses↗
DOE OSTI2021

Exploring filamentous fungi depolymerization of corn stover in the context bioenergy queuing operations

Recalcitrance of lignocellulosic feedstocks to depolymerization is a significant barrier for bioenergy production approaches that require conversion of monomeric carbohydrates to renewable energy sources. This study assesses how low-cost modifications in the feedstock supply chain can be transformed into targeted pretreatments in the context of the entire bioenergy supply chain. The aim of this research is to overcome the physiochemical barriers in corn stover that necessitate increased severity in conversion in terms of chemical loading, temperature, and residence time. Corn stover samples were inoculated with a selective (Ceriporiopsis subvermispora) and non-selective (Phaenarochaete chrysosporium) lignin degrading filamentous fungal strains, then stored aerobically to determine the working envelope for fungal pretreatment to achieve lignin degradation. Dry matter loss and gross chemical makeup of corn stover varied by the length of treatment (2 and 4 weeks) and by the moisture content of the treated corn stover samples (40 and 60%, wet basis). Dry matter loss in P. chrysosporium inoculated biomass was elevated compared to the C. subvermispora inoculated biomass; however, treatment also induced additional chemical composition changes suggestive of depolymerization. Scanning electron microscope images reveal hyphae attached within cell lumen and suggest structural changes within P. chrysosporium treated corn stover after 60% moisture storage. These results highlight that fungal treatment approaches must balance loss of convertible material with the potential for reduction in recalcitrance. Techno-economic assessment (TEA) of fungal pretreatment in a short-term queuing system indicated the viability of this approach compared to conventional queuing operations. The total queuing system cost was estimated at $\$$1.65/tonne of biomass stored. After applying the credit of $\$$1.48/tonne from energy savings in the conversion phase using fungal pretreated biomass, the total system cost was $0.80 lower than traditional biomass queueing approach. While the TEA results suggested that treating biomass with C. subvermispora is the most economically viable storage method in the designed fungal-assisted queuing system, future research should focus on additional fungal depolymerization such as those observed in the P. chrysosporium inoculated biomass.

09 BIOMASS FUELS↗
DOE OSTI2022

Local Structure Analysis and Modelling of Lignin‐Based Carbon Composites through the Hierarchical Decomposition of the Radial Distribution Function

Abstract Carbonized lignin has been proposed as a sustainable and domestic source of activated, amorphous, graphitic, and nanostructured carbon for many industrial applications as the structure can be tuned through processing conditions. However, the inherent variability of lignin and its complex physicochemical structure resulting from feedstock and pulping selection make the Process‐Structure‐Property‐Performance (PSPP) relationships hard to define. In this work, radial distribution functions (RDFs) from synchrotron X‐ray and neutron scattering of lignin‐based carbon composites (LBCCs) are investigated using the Hierarchical Decomposition of the Radial Distribution Function (HDRDF) modelling method to characterize the local atomic environment and develop quantitative PSPP relationships. PSPP relationships for LBCCs defined by this work include crystallite size dependence on lignin feedstock as well as increasing crystalline volume fraction, nanoscale composite density, and crystallite size with increasing reduction temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Plastic glut down a microbial gut

Enzymes sequestered from microbes have demonstrated the ability to readily digest amorphous regions of polyethylene terephthalate (PET) in ambient conditions. Although nascent, enzymatic depolymerization can soon vie for commercialization and provide monomeric feedstock at rates comparable to petrochemical feedstock for repolymerization, achieving the coveted goal of cradle-to-cradle recycling. © 2022 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Industrial Chemistry.

59 BASIC BIOLOGICAL SCIENCES↗