Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “evaporation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Chemical reaction of atomic oxygen with evaporated films of copper, part 4

Evaporated copper films were exposed to an atomic oxygen flux of 1.4 x 10(exp 17) atoms/sq cm per sec at temperatures in the range 285 to 375 F (140 to 191 C) for time intervals between 2 and 50 minutes. Rutherford backscattering spectroscopy (RBS) was used to determine the thickness of the oxide layers formed and the ratio of the number of copper to oxygen atoms in the layers. Oxide film thicknesses ranged from 50 to 3000 A (0.005 to 0.3 microns, or equivalently, 5 x 10(exp -9) to 3 x 10(exp -7); it was determined that the primary oxide phase was Cu2O. The growth law was found to be parabolic (L(t) varies as t(exp 1/2)), in which the oxide thickness L(t) increases as the square root of the exposure time t. The analysis of the data is consistent with either of the two parabolic growth laws. (The thin-film parabolic growth law is based on the assumption that the process is diffusion controlled, with the space charge within the growing oxide layer being negligible. The thick-film parabolic growth law is also based on a diffusion controlled process, but space-charge neutrality prevails locally within very thick oxides.) In the absence of a voltage measurement across the growing oxide, a distinction between the two mechanisms cannot be made, nor can growth by the diffusion of neutral atomic oxygen be entirely ruled out. The activation energy for the reaction is on the order of 1.1 eV (1.76 x 10(exp -19) joule, or equivalently, 25.3 kcal/mole).

Fromhold, A. T.↗

Evaporation over global oceans derived from satellite data and AGCM

Evaporation over ocean at 100 km has been estimated using operational satellite data. Recent satellite results are compared to data obtained through atmospheric general circulation models (AGCMs). A large systematic error is found in AGCM data which is considered to be due to overestimation of atmospheric moisture. It is suggested that the discrepancy may be caused by errors in operational infrared sounder data assimilated into the model. The error may also be caused by interpolation of very sparse in situ data in areas of sharp gradients.

Liu, W. T.↗

Estimation of bare soil evaporation from a multi-frequency airborne SAR

An experiment was performed with the NASA/JPL airborne radar polarimeter in Sept. 1989 in an agricultural area near Fresno, CA. Based on 1st-order surface backscattering models, a physically based algorithm for retrieval of soil moisture and surface roughness was developed. It is shown that copolarization ratio is sensitive to soil moisture but not to soil roughness at high incidence angles (between 40 and 60 deg). The derived soil moisture was employed to derive a two-layer heat and energy flux model to estimate evaporation from bare soils.

Soares, Joao V.↗

Remote sensing of the biological dynamics of large-scale salt evaporation ponds

Optical properties of salt evaporation ponds associated with Exportadora de Sal, a salt production company in Baja California Sur, Mexico, were analyzed using a combination of spectroradiometer and extracted pigment data, and Landsat-5 Thematic Mapper imagery. The optical characteristics of each pond are determined by the biota, which consists of dense populations of algae and photosynthetic bacteria containing a wide variety of photosynthetic and photoprotective pigments. Analysis has shown that spectral and image data can differentiate between taxonomic groups of the microbiota, detect changes in population distributions, and reveal large-scale seasonal dynamics.

Richardson, Laurie L.↗

New explicit equations for the accurate calculation of the growth and evaporation of hydrometeors by the diffusion of water vapor

The traditional explicit growth equation has been widely used to calculate the growth and evaporation of hydrometeors by the diffusion of water vapor. This paper reexamines the assumptions underlying the traditional equation and shows that large errors (10-30 percent in some cases) result if it is used carelessly. More accurate explicit equations are derived by approximating the saturation vapor-density difference as a quadratic rather than a linear function of the temperature difference between the particle and ambient air. These new equations, which reduce the error to less than a few percent, merit inclusion in a broad range of atmospheric models.

Srivastava, R. C.↗

Solar cells for lunar applications by vacuum evaporation of lunar regolith materials

The possibility of the direct fabrication of solar cells on the lunar surface by the vacuum evaporation of lunar regolith is examined as an alternative approach to electric power generation on the surface of the moon. The raw materials for large-scale solar cell growth could be available from the waste products generated in regolith processing for volatiles collection and oxygen extraction. The production of vast areas of solar cells can be implemented through a self-generation process whereby the power generated by grown cells is used to produce more cells.

Ignatiev, Alex↗

Evaporation Of Clusters Of Drops In A Jet

Report presents theoretical study of evaporation of clusters of liquid drops injected with gas jet flowing into hot ambient gas. One in series of studies of various aspects of behavior of sprays. Simplified mathematical models used to extract qualitative information on trends in interactions.

Bellan, Josette↗

Corrosion of metal particle and metal evaporated tapes

Very high coercivity metal particle (MP) and metal evaporated (ME) tapes are being used in 8mm video and digital audio tape applications, and more recently in digital data recording applications. In view of the inherent susceptibility of such media to environmental corrosion, a number of recent studies have addressed their long term stability and archivability. These studies have used an accelerated corrosion test based either on elevated temperature-humidity or polluting gas atmospheres known as Battelle tests. A comparison of the Battelle test results performed at different laboratories reveals a large variation from one location to another, presumably due to incorrect replication of the Battelle condition. Furthermore, when the Battelle tests are performed on enclosed cartridges, it is quite possible that diffusion limits the penetration of the extremely low concentration polluting gaseous species to the inner layers of the tapes during the short time of the accelerated test, whereas in real life these diffusion limitations may not apply. To avoid this uncertainty, the corrosion behavior of commercial 8mm MP and ME tapes when cassettes without their external plastic cases were exposed to 50 deg C and 80 percent RH for 7.5 weeks is investigated.

Speliotis, Dennis E.↗

Mergers, cooling flows, and evaporation

Mergers (the capture of cold gas, especially) can have a profound influence on the hot coronal gas of early-type galaxies and clusters, potentially inducing symptoms hitherto attributed to a cooling flow, if thermal conduction is operative in the coronal plasma. Heat can be conducted from the hot phase into the cold phase, simultaneously ionizing the cold gas to make optical filaments, while locally cooling the coronal gas to mimic a cooling-flow. If there is heat conduction, though, there is no standard cooling-flow since radiative losses are balanced by conduction and not mass deposition. Amongst the strongest observational support for the existence of cooling-flows is the presence of intermediate temperature gas with x-ray emission-line strengths in agreement with cooling-flow models. Here, x-ray line strengths are calculated for this alternative model, in which mergers are responsible for the observed optical and x-ray properties. Since gas around 10(exp 4) K is thermally stable, the cold cloud need not necessarily evaporate and hydrostatic solutions exist. Good agreement with the x-ray data is obtained. The relative strengths of intermediate temperature x-ray emission lines are in significantly better agreement with a simple conduction model than with published cooling-flow models. The good agreement of the conduction model with optical, infrared and x-ray data indicates that significantly more theoretical effort into this type of solution would be profitable.

Sparks, W. B.↗

A model for the evaporation of clusters of drops embedded in jet vortices. I - Steady injection of identical clusters

A model is developed for describing the interaction of vortex-drop clusters in a flowing gaseous jet, convecting downstream from an injection location. Results are presented for a stationary case representing the situation when identical clusters are continuously injected and the injection rate is constant. The results indicate that, in a rich mixture high-drop-number density regime, the mass evaporated from the drops controls the velocity of the cluster-in-vortex as it propagates downstream.

Bellan, J.↗

Possible sources of H2 to H2O enrichment at evaporation of parent chondritic material

One of the results obtained from thermodynamic simulation of recondensation of the source chondritic material is that at 1500-1800 K it's possible to form iron-rich olivine by reaction between enstatite, metallic iron and water vapor in the case of (H2O)/(H2) approximately equal to 0.1. This could be reached if the gas depletion in hydrogen is 200-300 times relative to solar abundance. To get this range of depletion one needs some source material more rich in hydrogen than the carbonaceous CI material which is the richest in volatiles among chondrites. In the case of recondensation at impact heating and evaporation of colliding planetesimals composed of CI material, we obtain insufficiently high value of (H2)/(H2O) ratio. In the present paper we consider some possible source materials and physical conditions necessary to reach gas composition with (H2)/(H2O) approximately 10 at high temperature.

Makalkin, A. B.↗

Microwave properties and characterization of co-evaporated BSCCO thin films

An extensive characterization of Bi-Sr-Ca-Cu-O (BSCCO) thin films deposited by co-evaporation on LaAlO3 and SrTiO3 substrates was performed. The films had a T(sub c) (R = O) of approximately 78 K, and were predominantly c-axis oriented, with critical current densities (J(sub c)) at 4.5 K of 1.6 x 10(exp 6) and 1.1 x 10(exp 6) A cm(sup -2), for the samples on SrTiO3 and LaAlO3, respectively. The microwave properties of the films were examined by three techniques. The complex conductivity sigma(sub *) = sigma(sub 1) - j(sigma(sub 2)) and the magnetic penetration depth (A) were measured by power transmission at 30.6 GHz; the surface resistance (R(sub s)) was measured using a cavity resonator at 58.9 GHz, and the transmission line losses were determined by measuring the quality factor (Q) of a linear microstrip resonator at 10.4 and 20.2 GHz. The complex conductivity for the film on LaAlO3 was determined to be (2.0-j10) x 10(exp 5) S/m at 77 K. It was observed that in the superconducting state sigma(sub 1) deviates from both the Bardeen-Cooper-Schrieffer (BCS) theory and the two-fluid model. Values of lambda were found to be approximately 2.0 and 1.1 microns at 77 K and 20 K respectively, and were obtained for the film on LaAlO3. The value of lambda at 20 K was approximately three times larger than that of BSCCO single crystals. R(sub s) values of 865 and 1391 mOmega were obtained for the films on SrTiO3 and LaAlO3, respectively, at 77 K and 58.9 GHz. Unloaded Q factors at 20 K of approximately 1100 and 800 at 10.4 and 20.2 GHz respectively, were measured for the BSCCO resonator. Unloaded Q values of 290 and 405 at 20 K were obtained at 10.4 GHz and 20.2 GHz respectively, for an all gold (Au) resonator.

Miranda, F. A.↗

On wave-CISK and the evaporation-wind feedback for the Madden-Julian oscillation

The combined effects of Kelvin wave-CISK and the evaporation-wind (E-W) feedback are proposed as a possible mechanism for the Madden-Julian oscillation. A very simple single vertical mode model has been employed to examine the effects of both these processes on moist Kelvin waves. The effects of wave-induced moisture convergence is parameterized by reducing the moist static stability, and CISK occurs when the moist static stability becomes negative. The E-W feedback in the presence of mean easterlies leads to unstable Kelvin modes. The presence of mean westerlies leads to decaying Kelvin modes. When CISK and the E-W feedback work in concert, an unstable Kelvin mode develops that has phase speeds of propagation between 5 m/s and 10 m/s for a large range of parameter values. On the other hand, the E-W feedback mechanism alone, in the case when CISK is not operating, produces the phase speeds of the observed Madden-Julian oscillation for only a very limited range of parameter values.

Kirtman, B.↗

Multiplicities of secondaries in interactions of 1.8 GeV/nucleon Fe-56 nuclei with photoemulsion and the cascade evaporation model

A nuclear photographic emulsion method was used to study the charge-state, ionization, and angular characteristics of secondaries produced in inelastic interactions of Fe-56 nuclei at 1.8 GeV/nucleon with H, CNO, and AgBr nuclei. The data obtained are compared with the results of calculations made in terms of the Dubna version of the cascade evaporation model (DCM). The DCM has been shown to satisfactorily describe most of the interaction characteristics for two nuclei in the studied reactions. At the same time, quantitative differences are observed in some cases.

Dudkin, V. E↗

Incorporation of an evaporative cooling scheme into a dynamic model of orographic precipitation

A simple evaporative cooling scheme was incorporated into a dynamic model to estimate orographic precipitation in mountainous regions. The orographic precipitation model is based on the transport of atmospheric moisture and the quantification of preciptable water across a 3D representation of the terrain from the surface up to 250 hPa. Advective wind fields are computed independently and boundary conditions are extracted from radiosonde data. Precipitation rates are obtained through calibration of a spatially distributed precipitation efficiency parameter. The model was applied to the central Sierra Nevada. Results show a gain of the order of 20% in threat-score coefficients designed to measure the forecast ability of the model. Accuracy gains are largest at high elevations and during intense storms associated with warm air masses.

Barros, Ana Paula↗

Evaporation and solar irradiance as regulators of sea surface temperature in annual and interannual changes

Seven years of net surface solar irradiance (S) derived from cloud information provided by the International Satellite Cloud Climatology Project (ISCCP) and 4 years of surface latent heat flux (E) derived from the observations of the special sensor microwave imager (SSM/I) were used to examine the relation between surface heat fluxes and sea surface temperature (T(sub s)) in their global geographical distribution, seasonal cycle, and interannual variation. The relations of seasonal changes imply that evaporation cooling is significant over most of the ocean and that solar heating is the main drive for the change of T(sub s) away from the equatorial wave guide where ocean dynamics may be more important. However, T(sub s) is not the most direct and significant factor in the seasonal changes of S and E over most of the ocean; the solar incident angle may be more important to S, and wind speed and air humidity are found to correlate better with E. Significant local correlations between anomalies of T(sub s) and S and between anomalies of T(sub s) and E are found in the central equatorial Pacific; both types of correlation are negative. The influence of ocean dynamics in changing T(sub s) in the tropical ocean cannot be ignored.

Liu, W. Timothy↗

Oven Evaporates Isopropyl Alcohol Without Risk Of Explosion

Ordinary convection oven with capacity of 1 ft.(sup3) modified for use in drying objects washed in isopropyl alcohol. Nitrogen-purge equipment and safety interlocks added to prevent explosive ignition of flammable solvent evaporating from object to be dried.

Morgan, Gene E.↗