Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “elastic deformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Cell model and elastic moduli of disordered solids - Low temperature limit

The cell theory has been previously employed to compute the equation of state of a disordered condensed system. It is now generalized to include anisotropic stresses. The condition of affine deformation is adopted, transforming an orginally spherical into an ellipsoidal cell. With a Lennard-Jones n-m potential between nonbonded centers, the formal expression for the deformational free energy is derived. It is to be evaluated in the limit of the linear elastic range. Since the bulk modulus in this limit is already known, it is convenient to consider a uniaxial deformation. To begin with, restrictions are made to the low-temperature limit in the absence of entropy contributions. Young's modulus and Poisson's ratio then follow.

Peng, S. T. J.↗
DOE OSTI2023

In-situ high energy X-ray diffraction study of deformation behavior in Nb nanoparticle-martensitic NiTi composite wire

Here, this study investigated the deformation behavior in Nb nanoparticle-martensitic NiTi composite wire during tensile loading by means of in-situ high-energy X-ray diffraction. Compared to Nb nanowires, the dispersedly distributed Nb nanoparticles have little effect on the transformation and deformation behaviors of NiTi matrix, causing the absence of R phase transformation and the occurrence of deformation twinning in NiTi matrix. Meanwhile, the occurrence of deformation twinning in NiTi matrix can reduce the shape strain to be coordinated by the unfavorable orientated martensite variants, and thus decreases the internal stress among NiTi martensite variants generated during martensite reorientation process. In addition, TEM result proved that Nb nanoparticles can achieve exceptionally large elastic strain in B19'-NiTi matrix (~4%), just as Nb nanowires. However, this large elastic strain (stress) will be released with the occurrence of NiTi deformation twinning.

36 MATERIALS SCIENCE↗
NASA NTRS1993

Experimental evaluation of tailored chordwise deformable box beam and correlation with theory

This paper describes an experimental methodology based upon the use of a flexible sling support and load application system that has been created and utilized to evaluate a box beam which incorporates an elastic tailoring technology. The design technique used here for elastically tailoring the composite box beam structure is to produce exaggerated chordwise camber deformation of substantial magnitude to be of practical use in the new composite aircraft wings. The traditional methods such as a four-point bend test to apply constant bending moment with rigid fixtures inhibits the designed chordwise deformation from occurring and, hence, the need for the new test method. The experimental results for global camber and spanwise bending compliances correlate well with theoretical predictions based on a beam-like model.

Rehfield, Lawrence W.↗
NASA NTRS1989

Connection forces in deformable multibody dynamics

In the dynamic formulation of holonomic and nonholonomic systems based on D'Alembert-Lagrange equation, the forces of constraints are maintained in the dynamic equations by introducing auxiliary variables, called Lagrange multipliers. This approach introduces a set of generalized reaction forces associated with the system generalized coordinates. Different sets of variables can be used as generalized coordinates and accordingly, the generalized reactions associated with these generalized coordinates may not be the actual reaction forces at the joints. In rigid body dynamics, the generalized reaction forces and the actual reaction forces at the joints represent equipollent systems of forces since they produce the same total forces and moments at and about any point on the rigid body. This is not, however, the case in deformable body analyses wherein the generalized reaction forces depend on the system generalized reference and elastic coordinates. In this paper, a method for determining the actual reaction forces at the joints from the generalized reaction forces in deformable multibody systems is presented.

Shabana, A. A.↗
NASA NTRS1975

Modeling damaged wings: Element selection and constraint specification

The NASTRAN analytical program was used for structural design, and no problems were anticipated in applying this program to a damaged structure as long as the deformations were small and the strains remained within the elastic range. In this context, NASTRAN was used to test three-dimensional analytical models of a damaged aircraft wing under static loads. A comparison was made of calculated and experimentally measured strains on primary structural components of an RF-84F wing. This comparison brought out two sensitive areas in modeling semimonocoque structures. The calculated strains were strongly affected by the type of elements used adjacent to the damaged region and by the choice of multipoint constraints sets on the damaged boundary.

Stronge, W. J.↗
NASA NTRS1982

Sonic wind tunnel of the Institute of Fluid Mechanics of Lille

A 65 hp wind tunnel with a 40 mm by 240 mm airstream is described. This wind tunnel can achieve speeds in the neighborhood of the speed of sound, both subsonic and supersonic. It is useful in studying the transonic bump technique. The test section is 600 mm long. The side walls are made of transparent glass, and both the upper and lower walls are deformable, each through the use of nine jacks with elastic sleeves. So as to avoid condensation, the airstream's temperature is stabilized by an air exchanger at the temperature of the outside air. The first results for supersonic operation, the distribution of Mach numbers within the airstream between the parallel walls, the value of the use factor, and the diffuser's efficiency are all given.

Gontier, G.↗
NASA NTRS1983

Load deflection characteristics of inflated structures

A single, closed form relationship to relate load to the deformed dimensions of the horizontal torus was developed. Wall elasticity was included in the analysis, and special care was taken to predict the final footprint area of the loaded structure. The test fixture utilized is shown. The tori used for the bulk of the testing were rubber inner tubes for a 32 and 160 pneumatic tire. The inner tube being tested was plumbed, to a mercury-filled manometer, which had a 50 inch measurement capacity, by use of a special adapter. The adapter fit over the valve stem and allowed air to be added from a shop-air source and to be bled through the standard valve mechanism. In this fashion, tests requiring the maintenance of a constant indication of air pressure could be run with little difficulty.

Baumgarten, J. R.↗
NASA NTRS1983

Nonlinear effects of elastic coupling in unsymmetric laminates

Classical lamination theory predicts the room-temperature shape of all unsymmetrically laminated, elevated-temperature cure composites to be a saddle shape. Experimental observation indicates, however, that in many cases the room-temperature shape is cylindrical. In addition, a second cylindrical shape can often be obtained from the first by a simple snap-through action. It is the elastic couplings between inplane and out-of-plane deformations which are inherent in unsymmetric laminates that are responsible for the room-temperature shape. However, the couplings are so strong that geometrically nonlinear effects are produced. These are not accounted for in the classical theory. This paper reviews a theory developed to explain the effects of the coupling on laminate shape. The theory is based on a minimization of the laminate's total potential energy. The theory accounts for geometric nonlinearities. Because the problem is nonlinear, approximate solutions are sought by using a Rayleigh-Ritz procedure. Because of the observed snap-through of some laminates, stability of the predicted shapes is examined. Numerical results and some limited experimental data are presented for several laminates.

Hyer, M. W.↗
NASA NTRS1987

Contribution to the study of composite materials and their damage

Chapter 1 describes the homogenization techniques used for defining the overall behavior of composite materials for conventional cases of linear and perfectly glued elastic constituents. Chapters 2 and 3 focus on solving the problems inherent in two types of degenerated situations: elastic media with microcavities, and elastic media containing rigid inclusions. Through suitable definitions of deformation concepts and macroscopic stresses it is shown that conventional theory results apply naturally to these limits.

Lene, F.↗
NASA NTRSDate not supplied

Computing the effective elasticity of anisotropic porous media from X-ray computed micro-tomography images

Development and optimization of composite materials designed for thermal protection of NASA’s spacecraft requires the understanding of their physical response to high-enthalpy environments. To predict their macro-scale properties and behavior, high-fidelity 3D simulations are performed at the micro-scale on realistic representations of these composites. The digital micro-structures are generated either synthetically or through X-ray micro-tomography reconstructions. One of the main challenges in the prediction of heatshield material structural response is the computation of the effective elasticity of the fibrous composite, as well as the understanding of the deformation and stresses generated at the micro-scale. These are driven by the fiber layout within the micro-structure and the distribution of the infused matrix. In this effort, the micro-mechanical linear elastic behavior of fibrous ablators is modeled through the use of a numerical method based on the Multi-Point Stress Approximation (MPSA) finite volume scheme. The MPSA, a generalization of the more commonly used Multi-Point Flux Approximation (MPFA), was discussed in a previous presentation at the 15th USCCN and in reference. To predict the behavior of fibrous and woven architectures, algorithms that compute the local fiber orientation are used. The implementation of the MPSA was verified using analytical solutions, engineering test cases and compared against legacy Finite Element Analysis (FEA) software. The stress analysis models were then applied to real geometries used by NASA in thermal protection systems such as fibrous preforms and woven materials and the results were compared to experimental data.

Federico Semeraro↗
DOE OSTI2023

The mechanism of twin thickening and the elastic strain state of TWIP steel nanotwins

A Twinning Induced Plasticity (TWIP) steel with a nominal composition of Fe-16.4Mn-0.9C-0.5Si-0.05Nb-0.05V was deformed to an engineering strain of 6%. The strain around the deformation twins were mapped using the 4D-STEM technique. Strain mapping showed a large average elastic strain of approximately 6% in the directions parallel and perpendicular to the twinning direction. However, the large average strain comprised of several hot spots of even larger strains of up to 12%. These hot spots could be attributed to a high density of sessile Frank dislocations on the twin boundary and correspond to shear stresses of 1–1.5 GPa. The strain and therefore stress fields are significantly larger than other materials known to twin and are speculated to be responsible for the early thickness saturation of TWIP steel nanotwins. The ability to keep twins extremely thin helps improve grain fragmentation, i.e. the dynamic Hall–Petch effect, and underpins the large elongations and strain hardening rates in TWIP steels.

36 MATERIALS SCIENCE↗
NASA NTRS1991

Tailored composite wings with elastically produced chordwise camber

Four structural concepts were created which produce chordwise camber deformation that results in enhanced lift. A wing box can be tailored to utilize each of these with composites. In attempting to optimize the aerodynamic benefits, researchers found that there are two optimum designs that are of interest. There is a weight optimum which corresponds to the maximum lift per unit structural weight. There is also a lift optimum that corresponds to maximum absolute lift. Experience indicates that a large weight penalty accompanies the transition from weight to lift optimum designs. New structural models, the basic deformation mechanisms that are utilized, and typical analytical results are presented. It appears that lift enhancements of sufficient magnitude can be produced to render this type of wing tailoring of practical interest.

Rehfield, Lawrence W.↗
NASA NTRS1988

Shape memory alloys: New materials for future engineering

Shape memory is a new material property. An alloy which experiences relative severe plastic deformation resumes its original shape again after heating by 10 to 100 C. Besides simple shape memory, in similar alloys there is the second effect where the change in shape is caused exclusively by little temperature change. In pseudo-elasticity, the alloy exhibits a rubber-like behavior, i.e., large, reversible deformation at little change in tension. Beta Cu and beta NiTi alloys have been used in practice. The probability is that soon alloys based on Fe will become available. Recently increasing applications for this alloy were found in various areas of technology, even medical technology. A review with 24 references is given, including properties, production, applications and fundamental principles of the shape memory effect.

Hornbogen, E.↗
DOE OSTI2023

Effect of constitutive law on the erythrocyte membrane response to large strains

Three constitutive laws, that is the Skalak, neo-Hookean and Yeoh laws, commonly employed for describing the erythrocyte membrane mechanics are theoretically analyzed and numerically investigated to assess their accuracy for capturing erythrocyte deformation characteristics and morphology. In this work, particular emphasis is given to the nonlinear deformation regime, where it is known that the discrepancies between constitutive laws are most prominent. Hence, the experiments of optical tweezers and micropipette aspiration are considered here, for which relationships between the individual shear elastic moduli of the constitutive laws can also be established through analysis of the tension-deformation relationship. All constitutive laws were found to adequately predict the axial and transverse deformations of a red blood cell subjected to stretching with optical tweezers for a constant shear elastic modulus value. As opposed to Skalak law, the neo-Hookean and Yeoh laws replicated the erythrocyte membrane folding, that has been experimentally observed, with the trade-off of sustaining significant area variations. For the micropipette aspiration, the suction pressure-aspiration length relationship could be excellently predicted for a fixed shear elastic modulus value only when Yeoh law was considered. Importantly, the neo-Hookean and Yeoh laws reproduced the membrane wrinkling at suction pressures close to those experimentally measured. None of the constitutive laws suffered from membrane area compressibility in the micropipette aspiration case.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1994

Viscosity estimates for the crust and upper mantle from patterns of lacustrine shoreline deformation in the Eastern Great Basin

The deformed shorelines of Lake Bonneville constitute a classic source of information on lithospheric elastic thickness and upper mantle viscosity. We describe and apply a new model to a recently augmented data set. New data better constrain both the complex spatio-temporal pattern of the lake load and the crustal deformation response to that load. The history of lake level fluctuations has been significantly refined and somewhat modified. This is due to both more radiocarbon dates from within the Bonneville basin and to an improved calibration of the radiocarbon timescale itself. The data which constrain the crustal deformation pattern consist of ages and shoreline elevations from several hundred points which sample three major levels of Lake Bonneville and corresponding elevations from the high stands of three smaller lakes situated to the west of Lake Bonneville. The geometry of the Earth model incorporates an arbitrary number of layers overlying a half-space, and the rheology of each level can accommodate an arbitrary number of Maxwell viscoelastic elements in parallel. The inverse modeling comprises three complementary approaches: for the simplest configurations, we performed a direct search of the parameter space and delineated the irregular boundary of the subspace of acceptable models. For more complex configurations, we constrained the elastic parameters to their seismically determined values and then solved for viscosity versus depth profiles by either expressing the log(viscosity) versus log(depth) profile as a series of specially constructed orhtogonal polynomials, or by allowing each of 8-10 layers (plus the half-space) to have an independently determined viscosity. We found that the data do not strongly support (nor can they conclusively exclude) a more complex rheology than simple Maxwell viscoelasticity. The orthogonal polynomial solution exhibits an essentially monotonic decrease in viscosity with depth.

Bills, Bruce G.↗
DOE OSTI2025

Competition between roughness and strength for scale-dependent surfaces

Rocks famously have scale-dependent strength, yet the actual dependence is notoriously hard to measure or incorporate into any theoretical framework. Natural rough surfaces present an opportunity to solve the problem. Surfaces sliding in shear evolve as protrusions collide. These asperities can deform or break, thus creating a new surface shape. In particular, natural surfaces have roughness at all scales as well as scale-dependent strength. Based on a scaling analysis, we have previously suggested that the scale-dependent aspect ratio of steady-state surfaces should be proportional to the scale-dependent shear strain at yield. If true, scale-dependent strength could easily be inferred from natural surfaces. Thus, moving beyond the scaling argument to a rigorous treatment of scale-dependent strength for multiscale rough surfaces in shear is important. However, analytic frameworks for analyzing multiscale problems are challenging, as conventional continuum mechanics typically involves a single value for a material property across scales. Here, in this work, we build on the formalism of Persson (2001) that presents a method to compute contact area for rough surfaces with a prescribed topographic spectrum using a stochastic differential equation. The Persson formalism allows for plastic yield under normal loading of otherwise elastic materials and leaves open the possibility of scale-dependent yield stress. In this study, we pursue this route to develop a theory and numerical results for the yielding of a rough, elastoplastic surface with scale-dependent yield stress. Here, we examine surfaces for which the power spectrum of the topography 𝐶 and yield stress 𝑌 follow power laws as a function of scale 𝜆, such that 𝐶∼𝜆 −𝑚 and 𝑌∼𝜆 −𝑛 , respectively. In this formal treatment of the problem, we focus on surfaces in contact and the resulting yield and do not impose shear. Numerical solutions show that the deviation from the elastic scaling solution is bounded as expected by the prior 1D heuristic scaling argument that anticipates the Hurst exponent as 1−𝑛. We also show that the plasticity is expected to erode the contacts if 𝑚 is lower than 𝑛−3, which corresponds to a Hurst exponent lower than 1−𝑛/2. This result is rigorously sound for 2D, i.e., realistic surfaces, and quantitatively different than the prior scaling argument. The theory now permits a correspondingly quantitative approach to interpreting natural surfaces.

elasticity↗
NASA NTRS1992

Nucleation and growth of rolling contact failure of 440C bearing steel

A 'two-body' elasto-plastic finite element model of 2-dimensional rolling and rolling-plus-sliding was developed to treat the effect of surface irregularities. The model consists of a smooth cylinder in contact with a semi-infinite half-space that is either smooth or fitted with one of 0.4 microns deep or 7 microns deep groove, or a 0.4 microns high ridge-like asperity. The model incorporates elastic-linear-kinematic hardening-plastic (ELKP) and non-linear-kinematic hardening-plastic (NLKP) material constitutive relations appropriate for hardened bearing steel and the 440C grade. The calculated contact pressure distribution is Hertzian for smooth body contact, and it displays intense, stationary, pressure spikes superposed on the Hertzian pressure for contact with the grooved and ridged surface. The results obtained for the 0.4 microns deep groove compare well with those reported by Elsharkawy and Hamrock for an EHD lubricated contact. The effect of translating the counterface on the half space as opposed to indenting the half space with the counter face with no translation is studied. The stress and strain values near the surface are found to be similar for the two cases, whereas they are significantly different in the subsurface. It is seen that when tiny shoulders are introduced at the edge of the groove in the finite element model, the incremental plasticity and residual stresses are significantly higher in the vicinity of the right shoulder (rolling direction is from left to right) than at the left shoulder. This may explain the experimental observation that the spall nucleation occurs at the exit end of the artificially planted indents. Pure rolling calculations are compared with rolling + sliding calculations. For a coefficient of friction, mu = 0.1, the effect of friction is found to be small. Efforts were made to identify the material constitutive relations which best describe the deformation characteristics of the bearing steels in the initial few cycles. Elastic-linear-kinematic hardening-plastic (ELKP) material constitutive relations produce less net plastic deformation in the initial stages for a given stress, than seen in experiments. A new set of constitutive relations: non-linear-kinematic hardening-plastic (NLKP) was used. This material model produces more plasticity than the ELKP model and shows promise for treating the net distortions in the early stages. Techniques for performing experimental measurements that can be compared with the finite element calculations were devised. The measurements are being performed on 9mm-diameter, 440C steel cylindrical rolling elements in contact with 12.5 mm-diameter, 52100 steel balls in a 3-ball-rod fatigue test machine operating at 3600 RPM. Artificial, 7 microns deep, indents were inserted on the running track of the cylindrical rolling elements and profilometer measurements of these indents made, before and after the rolling. These preliminary measurements show that the indents are substantially deformed plastically in the process of rolling. The deformations of the groove calculated with the finite element model are comparable to those measured experimentally.

Gupta, V.↗