Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamic insulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Spin and charge excitations in the correlated multiband metal Ca 3 Ru 2 O 7

We use Ru $L_3$-edge resonant inelastic x-ray scattering to study the full range of excitations in Ca 3 Ru 2 O 7 from meV-scale magnetic dynamics through to the eV-scale interband transitions. This bilayer 4d-electron correlated metal expresses a rich phase diagram, displaying long-range magnetic order below 56 K followed by a concomitant structural, magnetic, and electronic transition at 48 K. In the low-temperature phase, we observe a magnetic excitation with a bandwidth of ~30 meV and a gap of ~8 meV at the zone center, in excellent agreement with inelastic neutron scattering data. The dispersion can be modeled using a Heisenberg Hamiltonian for a bilayer S = 1 system with single-ion anisotropy terms. At a higher energy loss, dd-type excitations show heavy damping in the presence of itinerant electrons, giving rise to a fluorescencelike signal appearing between the $t_{2g}$ and $e_g$ bands. At the same time, we observe a resonance originating from localized $t_{2g}$ excitations, in analogy to the structurally related Mott insulator Ca 2 RuO 4 . But whereas Ca 2 RuO 4 shows sharp separate spin-orbit excitations and Hund’s-rule driven spin-state transitions, here we identify only a single broad asymmetric feature. These results indicate that local intraionic interactions underlie the correlated physics in Ca 3 Ru 2 O 7 , even as the excitations become strongly mixed in the presence of itinerant electrons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Phonon modes and Raman signatures of MnBi 2n Te 3n+1 (n=1,2,3,4) magnetic topological heterostructures

An intrinsic antiferromagnetic topological insulator MnBi 2 Te 4 arises when intercalating a Mn-Te bilayer chain in a topological insulator, Bi 2 Te 3 . We present observations on the inter- and intralayer phonon modes of the generalized MnBi 2n Te 3n+1 (n=1,2,3,4) family using cryogenic low-frequency Raman spectroscopy with various polarization configurations. Two peaks at 66 and 112 cm –1 show abnormal perturbation in Raman linewidths below magnetic transition temperature due to spin-phonon coupling. In MnBi 4 Te 7 , B i2 Te 3 layers induce Davydov splitting of the A1g mode around 137 cm –1 at 5 K. The out-of-plane interlayer force constant estimated using the linear chain model was (3.98±0.14)×10 19 N/m 3 , three times weaker than that of Bi 2 Te 3 . Adding more Bi 2 Te 3 layers, such as MnBi 6 Te 10 and MnBi 8 Te 13 , makes Bi 2 Te 3 properties more dominant than magnetic properties. Our work experimentally and theoretically discovers the dynamics of phonon modes of MnBi 2n Te 3n+ 1 family, facilitating utilization of magnetic topological heterostructures.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Enhancing Thermal Transport in Polymeric Composites Via Engineered Noncovalent Filler–Polymer Interactions

Understanding thermal transport mechanisms in polymeric composites allows us to expand the boundaries of thermal conductivity in them, either increasing it for more efficient heat dissipation or decreasing it for better thermal insulation. But, these mechanisms are not fully understood. Systematic experimental investigations remain limited. Practical strategies to tune the interfacial thermal resistance (ITR) between fillers and polymers and the thermal conductivity of composites remain elusive. Here, we studied the thermal transport in representative polymer composites, using polyethylene (PE) or polyaniline (PANI) as matrices and graphite as fillers. PANI, with aromatic rings in its backbone, interacts with graphite through strong noncovalent π–π stacking interactions, whereas PE lacks such interactions. We can then quantify how π–π stacking interactions between graphite and polymers enhance thermal transport in composites. PE/graphite and PANI/graphite composites with the same 1.5% filler volume fractions show a ∼22.82% and ∼34.85% enhancement in thermal conductivity compared to pure polymers, respectively. Calculated ITRs in PE/graphite and PANI/graphite are ~6 x 10 -8 m 2 KW -1 and ~1 x 10 -8 m 2 KW -1 , respectively, highlighting how π–π stacking interactions reduce ITR. Molecular dynamics (MD) simulations suggest that π–π stacking interactions between PANI chains and graphite surfaces enhance alignment of PANI's aromatic rings with graphite surfaces. This allows more carbon atoms from PANI chains to interact with graphite surfaces at a shorter distance compared to PE chains. Finally, our work indicates that tuning the π–π stacking interactions between polymers and fillers is an effective approach to reduce the ITR and enhance the thermal conductivity of composites.

atoms↗
DOE OSTI2025

Nucleation and Antiphase Twin Control in Bi 2 Se 3 via Step‐Terminated Al 2 O 3 Substrates

The epitaxial synthesis of high-quality 2D layered materials is an essential driver of both fundamental physics studies and technological applications. Bi 2 Se 3 , a prototypical 2D layered topological insulator, is sensitive to defects imparted during the growth, either thermodynamically or due to the film-substrate interaction. Here, in this study, it is shown that step-terminated Al 2 O 3 substrates with a high miscut angle (3°) can effectively suppress a particular hard-to-mitigate defect, the antiphase twin. Systematic investigations across a range of growth temperatures and substrate miscut angles confirm that atomic step edges act as preferential nucleation sites, stabilizing a single twin domain. First-principles calculations suggest that there is a significant energy barrier for twin boundary formation at step edges, supporting the experimental observations. Detailed structural characterization indicates that this twin-selectivity is lost through the mechanism of the 2D layers overgrowing the step edges, leading to higher twin density as the thickness increases. These findings highlight the complex energy landscape unique to 2D materials that is driven by the interplay between substrate properties, nucleation dynamics, and defect formation, and overcoming and controlling these are critical to improve material quality for quantum and electronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Quantum Phase Diagram and Spontaneously Emergent Topological Chiral Superconductivity in Doped Triangular-Lattice Mott Insulators

The topological superconducting state is a highly sought-after quantum state hosting topological order and Majorana excitations. Here, in this Letter, we explore the mechanism to realize the topological superconductivity (TSC) in the doped Mott insulators with time-reversal symmetry (TRS). Through large-scale density matrix renormalization group study of an extended triangular-lattice t–J model on the six- and eight-leg cylinders, we identify a d + id-wave chiral TSC with spontaneous TRS breaking, which is characterized by a Chern number C=2 and quasi-long-range superconducting order. We map out the quantum phase diagram with by tuning the next-nearest-neighbor (NNN) electron hopping and spin interaction. In the weaker NNN-coupling regime, we identify a pseudogaplike phase with a charge stripe order coexisting with fluctuating superconductivity, which can be tuned into d -wave superconductivity by increasing the doping level and system width. The TSC emerges in the intermediate-coupling regime, which has a transition to a d-wave superconducting phase with larger NNN couplings. The emergence of the TSC is driven by geometrical frustrations and hole dynamics which suppress spin correlation and charge order, leading to a topological quantum phase transition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Isolated vesicles in submarine pumice: insights from the 2019 Volcano F eruption, Kingdom of Tonga

No reliable method can distinguish between subaerial and submarine pumice, but recent work shows that highly vesicular (total porosity, φ > 65%) submarine pumice from the 2012 Havre and 2021 Fukutoku Oka-no-Ba eruptions contains abundant isolated porosity (connectivity, C < 0.6). This differs from textural measurements of subaerial pumice with similarly high vesicularities, where high connectivities (C > 0.8) are often measured. To investigate the implications of this under-studied texture for bubble nucleation, growth, and coalescence dynamics at submarine eruptions, we analyze the textural characteristics of rafted pumice clasts from the 2019 submarine eruption of Volcano F, located along the Tonga-Kermadec Arc. We examined clasts collected while floating near the vent (50–200 km) and distally on the shores of Fiji (900 km). Using helium pycnometry and X-ray tomography (XRT), we quantified porosity and connectivity in 45 pumice lapilli, classifying them by vesicle macrotexture and edge morphology. Microvesicular clasts, the majority of which have breadcrust and cauliflower textures, exhibit the lowest connectivities (C = 0.61 ± 0.2), while macrovesicular clasts have high connectivities with C ~ 1. We propose that isolated porosity abundance varies according to clast location in the eruption column post-fragmentation. Microvesicular clasts erupted on the edges of the column and experienced high levels of seawater ingestion and subsequent quenching of the entire clast. Macrovesicular clasts, in contrast, erupted in the center of the eruption column and were thus thermally insulated, allowing magmatic bubbles in the molten pumice to nucleate, grow, and coalesce for longer. Our results and interpretation imply that low connectivity, microvesicular clasts preserve pre and syn-eruptive bubble processes at the 2019 Volcano F eruption.

Permeability↗
DOE OSTI2024

Dynamics of vacancy-induced modes in the non-Abelian Kitaev spin liquid

Here, we study the dynamical response of vacancy-induced quasiparticle excitations in the site-diluted Kitaev spin liquid with a magnetic field. Due to the flux-binding effect and the emergence of dangling Majorana fermions around each spin vacancy, the low-energy physics is governed by a set of vacancy-induced quasi-zero-energy modes. These localized modes result in unique characteristics of the dynamical spin correlation functions, which intriguingly mimic the single-quasiparticle density of states and further exhibit a quasi-zero-frequency peak. By recognizing the potential observability of these local correlation functions via scanning tunneling microscopy (STM), we show how the STM response is sensitive to the local flux configuration, the magnetic field strength, and the vacancy concentration. Constructing a simple model of the localized modes, we also elucidate how the local correlation functions can be interpreted in terms of the hybridization between these modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Quantum control of Hubbard excitons

Quantum control of the many-body wavefunction is a central challenge in quantum materials research, as it could yield a precise control knob to manipulate emergent phenomena. Floquet engineering, the coherent dressing of quantum states with periodic non-resonant optical fields, has become an important strategy for quantum control. Most applications to solid-state systems have targeted weakly interacting or single-ion states, leaving the manipulation of many-body wavefunctions largely unexplored. Here, in this work, we use Floquet engineering to achieve quantum control of a strongly correlated Hubbard exciton in the one-dimensional Mott insulator Sr 2 CuO 3 . A nonresonant midinfrared optical field coherently dresses the exciton wavefunction, driving its rotation between bright and dark states. We use resonant third-harmonic generation to quantify ultrafast π/2 rotations on the Bloch sphere spanned by these exciton states. Our work advances the quest towards programmable control of correlated states and exciton-based quantum sensing.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ultrafast relaxation of acoustic and optical phonons in a topological nodal-line semimetal ZrSiS

Recently, nodal line semimetals based on ZrSiS-family have garnered massive research interests contributing numerous experimental and theoretical works. Despite being the most studied nodal-line semimetal, a clear understanding of the transient state relaxation dynamics and the underlying mechanism in ZrSiS is lacking. Using time- and angle-resolved photoemission spectroscopy, we study the ultrafast relaxation dynamics in ZrSiS and reveal a unique relaxation in the bulk nodal-line state which is well-captured by a simple model based on optical and acoustic phonon cooling. Our model predicts linear decay processes for both optical and acoustic phonon relaxations with optical cooling dominant at higher temperatures. Our results reveal different decay mechanisms for the bulk and surface states and pave a way to understand the mechanism of conduction in this material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

High Performance Circuit Pastes for Solid Oxide Fuel Cell Applications: Final Technical Report

Using a combination of in-plane electrical conductivity measurements, electrical contact resistance measurements, tensile fracture tests, double shear lap fracture tests, rapid thermal cycling adhesion tests, in situ wetting angle measurements, 3D X-ray tomography, reduction-oxidation (RedOx) cycling, scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDAX), Density Functional Theory (DFT) modeling, Molecular Dynamics (MD) modeling, and Phase Field modeling, this project determined that a new brazing technique developed by the PIs (specifically the use of nickel particles to direct the wetting and spreading of molten silver) could be used to produce well-adhered, >97% dense, electrically-conductive circuits, current collectors, and/or electrical contacts on a variety of ceramic and ceramic-coated substrates (specifically lanthanum strontium manganite, yttria stabilized zirconia, sapphire, Cr2O3-passivated stainless steel, and Al2O3-passivated stainless steel). Compared to other silver-based alternatives, Ag:Ni led to less manufacturing defects and was more tolerant of the extreme environments (isothermal high-temperature aging) and occasional abuse (rapid thermal cycling and RedOx cycling) encountered during Solid Oxide Fuel Cell and/or Solid Oxide Electrolysis Cell operation. Further, in some situations (such as when to produce Ag:Ni electrical contacts to Al2O3-protected stainless steel) the Ni particles also improved operation by acting as chemical getters that removed electrically-insulating, surface-segregating substrate impurities (i.e. by lowering the contact resistance with the underlying substrate).

36 MATERIALS SCIENCE↗
DOE OSTI2023

Observation of Coulomb blockade and Coulomb staircases in superconducting Pr 0.8 Sr 0.2 NiO 2 films

Motivated by the discovery of superconductivity in the infinite-layer nickelate family, we report an experimental endeavor to clean the surface of nickelate superconductor Pr 0.8 Sr 0.2 NiO 2 films by Ar + ion sputtering and subsequent annealing, and we study their electronic structures by cryogenic scanning tunneling microscopy and spectroscopy. The annealed surfaces are characterized by nano-sized clusters and Coulomb staircases with periodicity inversely proportional to the projected area of the nanoclusters, consistent with a double-barrier tunneling junction model. Moreover, the dynamical Coulomb blockade effects are observed and result in well-defined energy gaps around the Fermi level, which correlate closely with the specific configuration of the junctions. These Coulomb blockade-related phenomena provide an alternative plausible cause of the observed gap structure that should be considered in the spectroscopic understanding of nickelate superconductors with the nano-clustered surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Probing topology in nonlinear topological materials using numerical K -theory

Nonlinear topological insulators have garnered substantial recent attention as they have both enabled the discovery of new physics due to interparticle interactions, and may have applications in photonic devices such as topological lasers and frequency combs. However, due to the local nature of nonlinearities, previous attempts to classify the topology of nonlinear systems have required significant approximations that must be tailored to individual systems. Here, we develop a general framework for classifying the topology of nonlinear materials in any discrete symmetry class and any physical dimension. Our approach is rooted in a numerical $K$ -theoretic method called the spectral localizer, which leverages a real-space perspective of a system to define local topological markers and a local measure of topological protection. Here, our nonlinear spectral localizer framework yields a quantitative definition of topologically nontrivial nonlinear modes that are distinguished by the appearance of a topological interface surrounding the mode. Moreover, we show how the nonlinear spectral localizer can be used to understand a system's topological dynamics, i.e., the time evolution of nonlinearly induced topological domains within a system. We anticipate that this framework will enable the discovery and development of novel topological systems across a broad range of nonlinear materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Dynamical vertex approximation for many-electron systems with spontaneously broken SU(2) symmetry

We generalize the formalism of the dynamical vertex approximation (DΓA)—a diagrammatic extension of the dynamical mean-field theory (DMFT)—to treat magnetically ordered phases. To this aim, we start by concisely illustrating the many-electron formalism for performing ladder resummations of Feynman diagrams in systems with broken SU(2) symmetry associated to ferromagnetic (FM) or antiferromagnetic (AF) order. We then analyze the algorithmic simplifications introduced by taking the local approximation of the two-particle irreducible vertex functions in the Bethe-Salpeter equations, which defines the ladder implementation of DΓA for magnetic systems. The relation of this assumption with the DMFT limit of large coordination-number/high dimensions is explicitly discussed. As a last step, we derive the expression for the ladder DΓA self-energy in the FM- and AF-ordered phases of the Hubbard model. The physics emerging in the AF-ordered case is explicitly illustrated by means of approximated calculations based on a static mean-field input for DΓA equations. The results obtained capture fundamental aspects of both metallic and insulating ground states of two-dimensional antiferromagnets, providing a reliable compass for future, more extensive applications of our approach. Furthermore, possible routes to further develop diagrammatic-based treatments of magnetic phases in correlated electron systems are briefly outlined in the Conclusions.

2-dimensional systems↗
NASA NTRS2005

Materials Chemistry Issues in the Development of a Single-Crystal Solar/Thermal Refractive Secondary Concentrator

A translucent crystal concentrates and transmits energy to a heat exchanger, which in turn heats a propellant gas, working gas of a dynamic power system, or a thermopile. Materials are the limiting issue in such a system. Central is the durability of the crystal, which must maintain the required chemical, physical/optical, and mechanical properties as it is heated and cooled. This report summarizes available data to date on the materials issues with this system. We focus on the current leading candidate materials, which are sapphire (Al2O3) for higher temperatures and silica (SiO2) for lower temperatures. We use data from thermochemical calculations; laboratory coupon tests with silica and sapphire; and system tests with sapphire. The required chemical properties include low-vapor pressure and interfacial stability with supporting structural materials. Optical properties such as transmittance and index of refraction must be maintained. Thermomechanical stability is a major challenge for a large, single-crystal ceramic and has been discussed in another report. In addition to the crystal, other materials in the proposed system include refractory metals (Nb, Ta, Mo, W, and Re), carbon (C), and high-temperature ceramic insulation. The major issue here is low levels of oxygen, which lead to volatile refractory metal oxides and rapid consumption of the refractory metal. Interfacial reactions between the ceramic crystal and refractory metal are also discussed. Finally, high-temperature ceramic insulating materials are also likely to be used in this system. Outgassing is a major issue for these materials. The products of outgassing are typically reactive with the refractory metals and must be minimized.

Jacobson, Nathan S.↗
NASA NTRS2016

A Synthesis of the Basal Thermal State of the Greenland Ice Sheet

Greenland's thick ice sheet insulates the bedrock below from the cold temperatures at the surface, so the bottom of the ice is often tens of degrees warmer than at the top, because the ice bottom is slowly warmed by heat coming from the Earth's depths. Knowing whether Greenland's ice lies on wet, slippery ground or is anchored to dry, frozen bedrock is essential for predicting how this ice will flow in the future. But scientists have very few direct observations of the thermal conditions beneath the ice sheet, obtained through fewer than two dozen boreholes that have reached the bottom. Our study synthesizes several independent methods to infer the Greenland Ice Sheet's basal thermal state -whether the bottom of the ice is melted or not-leading to the first map that identifies frozen and thawed areas across the whole ice sheet. This map will guide targets for future investigations of the Greenland Ice Sheet toward the most vulnerable and poorly understood regions, ultimately improving our understanding of its dynamics and contribution to future sea-level rise. It is of particular relevance to ongoing Operation IceBridge activities and future large-scale airborne missions over Greenland.

IceBridge↗
DOE OSTI2024

A numerical study of process complexity in permafrost dominated regions

Numerical modeling of permafrost dynamics requires adequate representation of atmospheric and surface processes, a reasonable parameter estimation strategy, and site-specific model development. The three main research objectives of the study are: (i) to propose a novel methodology that determines the required level of surface process complexity of permafrost models by conducting parameter sensitivity and calibration, (ii) to design and compare three numerical models of increasing surface process complexity, and (iii) to calibrate and validate the numerical models at the Yakou catchment on the Qinghai-Tibet Plateau as an exemplary study site. The calibration was carried out by coupling the Advanced Terrestrial Simulator (numerical model) and PEST (calibration tool). Simulation results showed that (i) A simple numerical model that considers only subsurface processes can simulate active layer development with the same accuracy as other more complex models that include surface processes. (ii) Peat and mineral soil layer permeability, Van Genuchten alpha, and porosity are highly sensitive. (iii) Liquid precipitation aids in increasing the rate of permafrost degradation. (iv) Deposition of snow insulated the subsurface during the thaw initiation period. We have developed and released an integrated code that couples the numerical software ATS to the calibration software PEST. The numerical model can be further used to determine the impacts of climate change on permafrost degradation.

Calibration↗
NASA NTRS2003

Brayton Power Conversion Unit Tested: Provides a Path to Future High-Power Electric Propulsion Missions

Closed-Brayton-cycle conversion technology has been identified as an excellent candidate for nuclear electric propulsion (NEP) power conversion systems. Advantages include high efficiency, long life, and high power density for power levels from about 10 kWe to 1 MWe, and beyond. An additional benefit for Brayton is the potential for the alternator to deliver very high voltage as required by the electric thrusters, minimizing the mass and power losses associated with the power management and distribution (PMAD). To accelerate Brayton technology development for NEP, the NASA Glenn Research Center is developing a low-power NEP power systems testbed that utilizes an existing 2- kWe Brayton power conversion unit (PCU) from previous solar dynamic technology efforts. The PCU includes a turboalternator, a recuperator, and a gas cooler connected by gas ducts. The rotating assembly is supported by gas foil bearings and consists of a turbine, a compressor, a thrust rotor, and an alternator on a single shaft. The alternator produces alternating-current power that is rectified to 120-V direct-current power by the PMAD unit. The NEP power systems testbed will be utilized to conduct future investigations of operational control methods, high-voltage PMAD, electric thruster interactions, and advanced heat rejection techniques. The PCU was tested in Glenn s Vacuum Facility 6. The Brayton PCU was modified from its original solar dynamic configuration by the removal of the heat receiver and retrofitting of the electrical resistance gas heater to simulate the thermal input of a steady-state nuclear source. Then, the Brayton PCU was installed in the 3-m test port of Vacuum Facility 6, as shown. A series of tests were performed between June and August of 2002 that resulted in a total PCU operational time of about 24 hr. An initial test sequence on June 17 determined that the reconfigured unit was fully operational. Ensuing tests provided the operational data needed to characterize PCU performance over its full operating range. The primary test variables used in operating the Brayton PCU were heater input power and rotor speed. Testing demonstrated a maximum steady-state alternating-current power output of 1835 W at a gas heater power of 9000 W and a rotor speed of 52000 rpm. The corresponding measured turbine inlet gas temperature was 1076 K, and the compressor inlet gas temperature was 282 K. When insulation losses from the gas heater were neglected, the Brayton cycle efficiency for the maximum power point was calculated to be 24 percent. The net direct-current power output was 1750 W, indicating a PMAD efficiency of about 95 percent.

Mason, Lee S.↗