Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “difference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Steady-state and time-resolved Thioflavin-T fluorescence can report on morphological differences in amyloid fibrils formed by Aβ(1-40) and Aβ(1-42)

Thioflavin-T (ThT) is one of the most commonly used dyes for amyloid detection, but the origin of its fluorescence enhancement is not fully understood. Herein we have characterised the ThT fluorescence response upon binding to the Aβ(1-40) and Aβ(1-42) variants of the Alzheimer's-related peptide amyloid-β, in order to explore how the photophysical properties of this dye relates to structural and morphological properties of two amyloid fibril types formed by peptides with a high degree of sequence homology. We show that the steady-state ThT fluorescence is 1.7 times more intense with Aβ(1-40) compared to Aβ(1-42) fibrils in concentration matched samples prepared under quiescent conditions. By measuring the excited state lifetime of bound ThT, we also demonstrate a distinct difference between the two fibril isoforms, with Aβ(1-42) fibrils producing a longer ThT fluorescence lifetime compared to Aβ(1-40). The substantial steady-state intensity difference is therefore not explained by differences in fluorescence quantum yield. Further, we find that the ThT fluorescence intensity, but not the fluorescence lifetime, is dependent on the fibril preparation method (quiescent versus agitated conditions). We therefore propose that the fluorescence lifetime is inherent to each isoform and sensitively reports on fibril microstructure in the protofilament whereas the total fluorescence intensity relates to the amount of exposed β-sheet in the mature Aβ fibrils and hence to differences in their morphology. Our results highlight the complexity of ThT fluorescence, and demonstrate its extended use in amyloid fibril characterisation. - Highlights: • ThT emission is more intense with Aβ(1-40) fibrils than with Aβ(1-42) fibrils. • Aβ(1-42) fibrils induce longer ThT fluorescence lifetimes and higher quantum yield. • ThT emission intensity in Aβ fibril samples reports on fibril morphology. • The ThT fluorescence lifetime is a characteristic feature of each Aβ fibril type.

60 APPLIED LIFE SCIENCES↗

Cloning and expressions of peroxisome proliferator activated receptor alpha1 and alpha2 (PPARα1 and PPARα2) in loach (Misgurnus anguillicaudatus) and in response to different dietary fatty acids

Peroxisome proliferator activated receptor alpha1 and alpha2 (PPARα1 and PPARα2) were investigated in loach (Misgurnus anguillicaudatus) by RACE (rapid amplification of cDNA ends) and qPCR (real-time quantitative PCR) for the first time. The cDNA sequences of PPARα1 and PPARα2 were 2042bp and 2407bp, respectively encoding 467 and 465 amino acids. Sequence alignments of deduced amino acids showed significant homology between the two subtypes of PPARα, indicating 70% identity. The two genes revealed sensible changes in transcriptions during early life stages of the loach, and the highest transcriptions of the two genes both appeared at some day after hatching. PPARα1 predominantly expressed in liver, while PPARα2 markedly expressed in heart. The expression regulation of PPARα1 and PPARα2 in response to dietary fatty acids was determined in livers of loaches fed with diets containing fish oil (FO group) and soybean oil (SO group) for 75 days. The expression level of PPARα1 in FO group was significantly higher than those in SO group (P < 0.01), while the expression level of PPARα2 in FO group was also significantly higher than those in SO group (P < 0.05). There was no significant difference in the expression level between PPARα1 and PPARα2 in SO group, whereas significant difference in FO group. These indicated that lipid resources could regulate the expressions of these two genes in the loach. Our results will provide opportunities to better understand the functional characterization of PPARα1 and PPARα2 in further studies. - Highlights: • The full-length cDNAs of loach PPARα1 and PPARα2 were obtained by a RACE PCR method. • Phylogenetic and protein characterizations of these two genes were predicted. • These two genes differentially expressed at different early life stages and tissues indicating their different functions. • n-3 PUFA may regulate the activation of PPARα in the loach.

60 APPLIED LIFE SCIENCES↗

Comparative metabolomic analysis of Crypthecodinium cohnii in response to different dissolved oxygen levels during docosahexaenoic acid fermentation

Highlights: • Growth characteristics of C. cohnii under different oxygen supply evaluated. • Effects of different oxygen supply at molecular level revealed for C. cohnii. • Potential biomarkers in response to different oxygen supplies identified in C. cohnii. Oxygen supply is an important factor during Crypthecodinium cohnii fermentation for docosahexaenoic acid (DHA) production. However, few studies about the intrinsic correlation between dissolved oxygen (DO) and cellular metabolism have been reported. In this study, the responses of C. cohnii to different DO levels were evaluated. The results showed the growth and glucose consumption rates of C. cohnii were much higher under high oxygen supply condition. Furthermore, GC-MS based comparative metabolomic analysis was employed to discriminate the responsive metabolites associated with varying DO levels. The results showed the intermediates involved in glycolytic pathway and TCA cycle were up-regulated under high DO levels at exponential phase. At stationary phase, under high DO levels, metabolites involved in triacylglycerol metabolism were up-regulated, while the OPP pathway intermediate product ribose 5-phosphate was down-regulated. Together, these results provide useful insights into the functional metabolic relationship between DO levels and DHA production in C. cohnii.

60 APPLIED LIFE SCIENCES↗

Different players generate positive responses in two in vitro cytokine assay formats with aqueous and immobilized TGN1412 analog

Highlights: • Cytokine producing cells in the two major in vitro assay formats were compared. • T-cell activation contributed to the positive response to CD28SA in PBMC assay. • Monocytes and granulocytes contributed to the positive response to CD28SA in WBCA. • Different players generated the positive responses in the two assays. To detect potential risk of severe cytokine release syndrome, in vitro assay formats with human cells have been developed. The two major testing platforms are a combination of whole blood with aqueous-phase test articles (whole blood cytokine assay, WBCA) and peripheral blood mononuclear cells with solid-phase articles (PBMC assay). Significant induction of cytokines was seen in both assays after treatment with a widely used control agent, TGN1412 or its analog CD28SA, but the WBCA cytokine profile differed from what was expected from clinical experience. In the WBCA, potential risk of CD28SA was detected by elevation of IL-8 whereas IL-2, a key cytokine after stimulation of CD28, was not induced in approximately 40% of donor samples. Therefore, further mechanistic understanding of the different responses in the in vitro assay was needed. In this study of donor samples treated with CD28SA, we compared the induction of cytokines and identified the cytokine-producing cells in the two assays. IL-2 was markedly elevated in all the donors in the PBMC assay but only in 1 of 3 donors in the WBCA. IL-8, the most sensitive biomarker in the WBCA, was produced by monocytes and granulocytes. T cells, the most relevant player in the PBMC assay with CD28SA, did not contribute to the positive response seen in two donors in the WBCA, which suggests that different players caused the positive cytokine responses to CD28SA in the two assays.

60 APPLIED LIFE SCIENCES↗

Evaluation of different getter substrates using two-dimensional gas chromatography with time of flight mass spectrometry

We report while understanding hydrogen uptake by organic based getters such as 1,4-bis(phenylethynyl)benzene (DEB) combined with a palladium(0)bis(dibenzylideneacetone) (Pd(dba) 2 ) catalyst is essential, another crucial element to understand is the decomposition of the DEB, Pd(dba) 2 , and/or substrate material. The breakdown of these materials may create unwanted volatiles, which may interact with and lead to deterioration of sensitive materials. Moreover, it is critical to understand if different substrates cause the getter and/or catalyst to degrade in different manners. Utilizing comprehensive two-dimensional gas chromatography (GC×GC) with time-of-flight mass spectrometry (TOFMS), the presence of volatiles located in the headspace of various DEB/Pd(dba) 2 getter substrates is examined. These samples include a getter infused silicone foam, a hydrogenated getter infused silicone foam, an activated carbon getter pellet, and a hydrogenated activated carbon getter pellet. Application of Fisher ratio (F-ratio) analyses lead to the identification of several compounds that are generated or consumed through the hydrogenation process. These include benzene derivatives such as bibenzyl, benzaldehyde, and vinyl benzoate in the activated carbon pellets and 1,5-diphenyl-3-pentanone, toluene, styrene, and 1–1'(2-pentene 1,5-diyl)bis benzene in the silicone foams, and alkane/alkene derivatives such undecane, 4-tridecene, and decane in the activated carbon pellets and 2,6-dimethyl undecane in the silicone foams. Further comparison of the different hydrogenated getter substrates (e.g. activated carbon pellet and silicone foam) indicates that the different substrates alter the decomposition products created from the degradation of the DEB and Pd(dba) 2 .

47 OTHER INSTRUMENTATION↗

A Finite Difference informed Random Walk solver for simulating radiation defect evolution in polycrystalline structures with strongly inhomogeneous diffusivity

Diffusivity of species and defects on grain boundaries is usually several orders of magnitude larger than that inside grains. Such strongly inhomogeneous diffusivity requires prohibitively high computational demands for modeling microstructural evolution. Here, this paper presents a highly-efficient numerical solver, combining the Finite Difference method and Random Walk model, designed for accurately modeling strongly inhomogeneous diffusion within polycrystalline structures. The proposed solver, termed Finite Difference informed Random Walk (FDiRW), integrates a customized Finite Difference (cFD) scheme tailored for fast diffusion along thin grain boundaries represented by a single-layer of nodes. Numerical experiments demonstrate that the FDiRW solver achieves an impressive efficiency gain of 1560x compared to traditional Finite Difference methods while maintaining accuracy, making it feasible for personal computer machines to handle diffusional systems with strongly inhomogeneous diffusivity across static polycrystalline microstructures. The model has been successfully applied to simulate radiation defect evolution, showcasing its scalability to engineering scales in both length and time dimensions.

36 MATERIALS SCIENCE↗

Areal interpolation of population projections consistent with different SSPs from 1-km resolution to block level based on USA Structures dataset

Population data are normally collected at various census administrative levels, and areal interpolation of population is often required to transform population to the desired spatial resolution. Building footprint datasets, such as Microsoft building footprints, have proven to be useful in estimating population distribution and can therefore be used for areal interpolation of population. In addition to Microsoft building footprints, the recently released USA Structures dataset provides additional information such as building type and building height for some regions, which may provide valuable information for a better depiction of population distribution and improved population areal interpolation accuracy. In this study, we have conducted areal interpolation of population projections consistent with three different Shared Socioeconomic Pathways (SSP2, SSP3, and SSP5) from 1-km grid cells to block level in Washington state for every ten years from 2020 to 2040 based on USA Structures. We assessed USA Structures-based population downscaling accuracy using U.S. decennial survey data in 2020 under three different downscaling schemes, including population downscaling from census tracts to block groups, from census tracts to blocks, and from block groups to blocks. The resulting accuracies were compared with those based on Microsoft building footprints. The comparison showed that USA Structures achieved higher accuracies across different population density regions and areas with different urbanization extent within our study area.

99 GENERAL AND MISCELLANEOUS↗

Atomistic insights into the heat conductance across the interfaces between erythritol and different metals: A non-equilibrium molecular dynamics study

The heat conductance across the interface between a phase change material (PCM) and the metal shell is important for thermal design of latent heat storage systems. Non-equilibrium molecular dynamics simulations were carried out in this work to unravel, at the atomistic level, the interfacial heat conductance mechanisms between erythritol (the most promising medium-temperature polyol PCM) and two different metals (i.e., copper and aluminum). The interfacial contact ratio was introduced as a parameter to represent different contact conditions at the interfaces, for example, different surface roughness levels of the metals. It was found that with the increase of interfacial contact ratio, the temperature difference between the erythritol/metal interfaces decreases, whereas the interfacial heat transfer coefficient increases gradually. At the perfect contact condition, i.e., the interfacial contact ratio reaches 100%, the interfacial heat transfer coefficients across the erythritol/Cu and erythritol/Al interfaces were predicted to be 398 ± 26 MW/m 2 K and 544 ± 11 MW/m 2 K, respectively. The interfacial heat conductance of erythritol/Al is better than that of erythritol/Cu. The mismatch of atomic spectral density across the interfaces between erythritol and the two metals was analyzed and distinguished. These results could guide the selection of packaging materials and the thermal design of erythritol-based latent heat storage systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Comparison of personal radio frequency electromagnetic field exposure in different urban areas across Europe

Background: Only limited data are available on personal radio frequency electromagnetic field (RF-EMF) exposure in everyday life. Several European countries performed measurement studies in this area of research. However, a comparison between countries regarding typical exposure levels is lacking. Objectives: To compare for the first time mean exposure levels and contributions of different sources in specific environments between different European countries. Methods: In five countries (Belgium, Switzerland, Slovenia, Hungary, and the Netherlands), measurement studies were performed using the same personal exposure meters. The pooled data were analyzed using the robust regression on order statistics (ROS) method in order to allow for data below the detection limit. Mean exposure levels were compared between different microenvironments such as homes, public transports, or outdoor. Results: Exposure levels were of the same order of magnitude in all countries and well below the international exposure limits. In all countries except for the Netherlands, the highest total exposure was measured in transport vehicles (trains, car, and busses), mainly due to radiation from mobile phone handsets (up to 97%). Exposure levels were in general lower in private houses or flats than in offices and outdoors. At home, contributions from various sources were quite different between countries. Conclusions: Highest total personal RF-EMF exposure was measured inside transport vehicles and was well below international exposure limits. This is mainly due to mobile phone handsets. Mobile telecommunication can be considered to be the main contribution to total RF-EMF exposure in all microenvironments.

60 APPLIED LIFE SCIENCES↗

Gender and age differences in mixed metal exposure and urinary excretion

Background: Little is known about the variation in exposure to toxic metals by age and gender and other potential modifying factors. We evaluated age and gender differences by measurements of metal/element concentrations in urine in a rural population in Matlab, Bangladesh, in three age groups: 8-12 (N=238), 14-15 (N=107) and 30-88 (N=710) years of age, living in an area with no point sources of metal exposure but where elevated water arsenic concentrations are prevalent. Results: We found marked differences in urine concentrations of metals and trace elements by gender, age, tobacco use, socioeconomic and nutritional status. Besides a clearly elevated urinary arsenic concentration in all age groups (medians 63-85 {mu}g As/L), and despite the low degree of contamination from industries and traffic, the urine concentrations of toxic metals such as cadmium and lead were clearly elevated, especially in children (median 0.31 {mu}g Cd/L and 2.9 {mu}g Pb/L, respectively). In general, women had higher urinary concentrations of toxic metals, especially Cd (median 0.81 {mu}g/L) compared to men (0.66 {mu}g/L) and U (median 10 ng/L in women, compared to 6.4 ng/L in men), while men had higher urinary concentrations of the basic and essential elements Ca (69 mg/L in men, 30-50 years, compared to 52 mg/L in women), Mg (58 mg/L in men compared to 50 mg/L in women), Zn (182 {mu}g/L in men compared to 117 {mu}g/L in women) and Se (9.9 {mu}g/L in men compared to 8.7 {mu}g/L in women). Manganese was consistently higher in females than in males in all age groups, suggesting a biological difference between females and males in Mn metabolism. Increasing socioeconomic status decreased the toxic metal exposure significantly in children and especially in men. Poor iron status was detected in 17% of children, adolescents and women, but only in 6% of men. Also zinc deficiency was more prevalent in females than in males. Conclusions: Women and children seemed to be more at risk for toxic metal exposure than men and at the same time more vulnerable to micronutrient deficiency. Higher concentrations of the toxic metals in urine in women are likely to reflect an increased gastrointestinal absorption of these metals at micronutrient deficiency, such as low body iron stores and Zn deficiency. Higher urinary concentrations of the essential elements in men likely reflect a better nutritional status. There is a need for information on exposure, lifestyle and socioeconomic factors, stratified by gender and age, for the purpose of conducting balanced risk assessment and management that considers such differences.

60 APPLIED LIFE SCIENCES↗

Gender differences in cadmium and cotinine levels in prepubertal children

Susceptibility to environmental stressors has been described for fetal and early childhood development. However, the possible susceptibility of the prepubertal period, characterized by the orchestration of the organism towards sexual maturation and adulthood has been poorly investigated and exposure data are scarce. In the current study levels of cadmium (Cd), cotinine and creatinine in urine were analyzed in a subsample 216 children from 12 European countries within the DEMOCOPHES project. The children were divided into six age–sex groups: boys (6–8 years, 9–10 years and 11 years old), and girls (6–7 years, 8–9 years, 10–11 years). The number of subjects per group was between 23 and 53. The cut off values were set at 0.1 µg/L for Cd, and 0.8 µg/L for cotinine defined according to the highest limit of quantification. The levels of Cd and cotinine were adjusted for creatinine level. In the total subsample group, the median level of Cd was 0.180 µg/L (range 0.10–0.69 µg/L), and for cotinine the median wet weight value was 1.50 µg/L (range 0.80–39.91 µg/L). There was no significant difference in creatinine and cotinine levels between genders and age groups. There was a significant correlation between levels of cadmium and creatinine in all children of both genders. This shows that even at such low levels the possible effect of cadmium on kidney function was present and measurable. An increase in Cd levels was evident with age. Cadmium levels were significantly different between 6–7 year old girls, 11 year old boys and 10–11 year old girls. As there was a balanced distribution in the number of subjects from countries included in the study, bias due to data clustering was not probable. The impact of low Cd levels on kidney function and gender differences in Cd levels needs further investigation. - Highlights: • In 216 children from 6 to 11 years old the median level of Cd was 0.18 µg/L. • The median level of cotinine was 1.50 µg/L. • Correlation between levels of Cd and creatinine in all children was detected. • Cd levels were different between 6–7 year old, 10–11 year old girls vs. 11 year old boys.

54 ENVIRONMENTAL SCIENCES↗

Predicting the effectiveness of different mulching techniques in reducing post-fire runoff and erosion at plot scale with the RUSLE, MMF and PESERA models

Highlights: • RUSLE, MMF and PESERA, were able to predict the erosive response in burned areas and their mitigation. • These models can be calibrated at a small spatial scale and provide accurate results at greater spatial scales. • RUSLE model ideal for fast and simple risk assessment. • MMF or PESERA models could be the base of a post-fire management decision tool. Wildfires have become a recurrent threat for many Mediterranean forest ecosystems. The characteristics of the Mediterranean climate, with its warm and dry summers and mild and wet winters, make this a region prone to wildfire occurrence as well as to post-fire soil erosion. This threat is expected to be aggravated in the future due to climate change and land management practices and planning. The wide recognition of wildfires as a driver for runoff and erosion in burnt forest areas has created a strong demand for model-based tools for predicting the post-fire hydrological and erosion response and, in particular, for predicting the effectiveness of post-fire management operations to mitigate these responses. In this study, the effectiveness of two post-fire treatments (hydromulch and natural pine needle mulch) in reducing post-fire runoff and soil erosion was evaluated against control conditions (i.e. untreated conditions), at different spatial scales. The main objective of this study was to use field data to evaluate the ability of different erosion models: (i) empirical (RUSLE), (ii) semi-empirical (MMF), and (iii) physically-based (PESERA), to predict the hydrological and erosive response as well as the effectiveness of different mulching techniques in fire-affected areas. The results of this study showed that all three models were reasonably able to reproduce the hydrological and erosive processes occurring in burned forest areas. In addition, it was demonstrated that the models can be calibrated at a small spatial scale (0.5 m{sup 2}) but provide accurate results at greater spatial scales (10 m{sup 2}). From this work, the RUSLE model seems to be ideal for fast and simple applications (i.e. prioritization of areas-at-risk) mainly due to its simplicity and reduced data requirements. On the other hand, the more complex MMF and PESERA models would be valuable as a base of a possible tool for assessing the risk of water contamination in fire-affected water bodies and for testing different land management scenarios.

54 ENVIRONMENTAL SCIENCES↗

Experimental research on the thermal performance of converging slot holes with different divergence angles

Thermal performances of two kinds of converging slot-hole (console) with different divergence angles have been measured using transient liquid crystal measurement technique which can process the nonuniform initial wall temperature. Four momentum ratios are tested. Consoles with different divergence angles produce different cooling effectiveness distributions in the upstream region. However, the cooling effectiveness distributions of the two consoles are similar in the downstream. The laterally averaged cooling effectiveness results show that the differences between the two consoles are very small and the best momentum ratio for both consoles' cooling effectiveness distribution is around two. With the momentum ratio increasing, the normalized heat transfer coefficient h/h{sub 0} of both consoles increases, but the h/h{sub 0} value of small divergence case is higher and becomes progressively higher than that of large divergence case. Moreover, the effect of the couple vortices on the heat transfer coefficient distributions is more significant for the large divergence case. Both consoles provide the surface a certain degree of thermal protection, especially in the upstream region. The distributions of heat flux ratio q/q{sub 0} are similar with those of {eta} because the influence of {eta} on q/q{sub 0} is much larger than that of h/h{sub 0} on q/q{sub 0}. (author)

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Whole-tree dormant season nitrogen pools for different species receiving combinations of fertilization and irrigation after one short rotation

Our understanding of the accretion and distribution of tree tissue nitrogen (N) pools across a variety of species and genotypes suitable for short-rotation woody crop (SRWC) production in response to water and N availability remains limited. We measured dormant-season, rotation-length, whole-tree N pools for five tree genotypes from four species (two eastern cottonwood, Populus deltoides Bartr., genotypes; American sycamore, Platanus occidentalis L.; American sweetgum, Liquidambar styraciflua L.; and loblolly pine, Pinus taeda L.) receiving irrigation (I), fertilization (F), their combination (IF), or no resources manipulation (C). Our results demonstrate that foliar nitrogen concentration [N] responded to fertilization but was constrained within genotype-specific ranges and varied temporally. Tree genotypes differed in their composite and component tissue N content (N C ), and these differences mostly reflected tissue mass (i.e., larger components and trees resulted in higher N C ). Resource amendments (I, F, IF) resulted in up to 3.8-fold increases in N C compared with C, which were most pronounced for sycamore and sweetgum with F and IF treatments, respectively. By the end of the rotation, forest stands accumulated 73 to 452 kg N ha –1 in tree tissues with 40 – 78 % distributed aboveground and 22 – 60 % distributed belowground. A critical difference between genotypes was that all hardwoods exhibited larger belowground N distributions than the evergreen conifer. Our results stress the importance of belowground N pools and highlight differences among genotypes. Furthermore, our study underscores valuable information about N pools across genotypes suitable for SRWC production, which can be leveraged to inform fertilization plans and devise sustainable nutrient management as production expands across marginal lands.

54 ENVIRONMENTAL SCIENCES↗

A tool and a methodology to use macros for abstracting variations in code for different computational demands

Scientific software used on high-performance computing platforms is in a phase of transformation because of the combined increase in the heterogeneity and complexity of models and hardware platforms. Having separate implementations for different platforms can easily lead to combinatorial explosions; therefore, the computational science community has been looking for mechanisms to express code through abstractions that can be specialized for different platforms. Most existing approaches use template meta-programming in C++, and are, therefore language specific. Here, we have developed a tool that uses customized expansion of macros to mimic some of C++ behavior in other languages. It enables unification of any code variants that may be necessary to run efficiently on different target architectures and different computational environments through use of macros with multiple alternative definitions and ability to arbitrate on definition selection for expansion. Combined with two other tools, a custom runtime, and a user specified recipe translator, our custom macroprocessor becomes a part of an overall performance portability solution that does not depend on any specific programming language. We also use macros as code-shorthand that lets code snippets become building blocks that allow variations in control flow to explore performance options. We demonstrate use of macros in Flash-X, a multiphysics multicomponent code with many Fortran legacy components derived from an earlier community code FLASH.

Heterogenous computing↗

Quantifying the influence of different biocrust community states and their responses to warming temperatures on soil biogeochemistry in field and mesocosm studies

Biocrusts influence soil biogeochemistry by fixing carbon (C) and nitrogen (N) and through leachate inputs to soils. Functional rates can vary among biocrust community states and in response to edaphic properties, heterotrophic microbial activity, and global change. Using soils and biocrusts from the Colorado Plateau, Utah, USA, we aimed to quantify the influence of early-successional (ES) and late-successional (LS) biocrust community states on soil biogeochemistry. In a field setting, we found soil was less “fertile” under ES than LS biocrust, but ES biocrust had a relative influence 1.3 times greater than LS biocrust on soil fertility. Leachate collected from LS biocrust had, on average, 6 times more organic C and 1.7 times more dissolved N than ES biocrust, but concentrations of phosphorus (P) and inorganic N did not differ among the two biocrust types. Here, to disentangle influences of biocrusts and soil properties on biogeochemical pools, we constructed mesocosms from homogenized soil and left the surface bare or covered with ES or LS biocrust, before assignment to ambient or warmed (+5 °C) temperature treatments for 3 months. Multivariate biogeochemical properties differed among cover types, yet all exhibited losses of P, N, and organic C and nearly half of the biogeochemical variables considered did not differ among cover types. Mesocosms with LS biocrust retained more dissolved N, supported 8 additional, significant correlations among biogeochemical pools of the biocrust and mineral soil layer on average, and lost fewer of these correlations under warming. Overall, while soils under LS biocrusts were more fertile (i.e., had higher nutrient concentrations) than under ES, we did not find evidence implicating leachate as the primary driver of this difference. Biocrust influences on soil fertility were greater when mineral soil nutrients were in lower concentrations, highlighting the value of even incipient biocrusts for dryland functioning.

54 ENVIRONMENTAL SCIENCES↗

Clinically Meaningful Differences in Patient-Reported Outcomes With Amifostine in Combination With Chemoradiation for Locally Advanced Non-Small-Cell Lung Cancer: An Analysis of RTOG 9801

Purpose: The purpose of this study is to analyze changes in quality of life (QOL) and symptoms from pretreatment to 6 weeks posttreatment in a Phase III randomized study (Radiation Therapy Oncology Group 9801) of amifostine (AM) vs. no AM in patients with Stages II-III non-small-cell lung cancer receiving paclitaxel and carboplatin as induction and then concurrently with hyperfractionated radiation therapy (RT). Methods and Materials: One hundred thirty-eight patients with baseline and 6-week posttreatment QOL data were analyzed. There were no significant differences in baseline demographics between those who did and did not have QOL data. The QOL and symptoms were assessed by using the European Organization for Research and Treatment of Cancer (EORTC) Global QOL and Pain subscales and the EORTC-Lung Cancer-13 symptom tool. Clinically relevant changes in QOL were characterized by 10-point differences in individual scores pre/post treatment. A daily diary of patient-rated difficulty swallowing and a weekly physician-rated dysphagia log (using National Cancer Institute Common Toxicity Criteria) were completed during treatment. Weight loss was monitored. Differences in outcomes were examined according to smoking status, alcohol use, and sex. Results: Patients receiving AM reported significantly greater pain reduction after chemoradiation (34% vs. no AM, 21%), less difficulty swallowing during chemoradiation, and less weight loss than patients not receiving AM. However, physician-rated assessments of dysphagia were not significantly different by treatment arm. There were no other significant changes in QOL or symptoms according to treatment arm, smoking status, alcohol use, or sex. Conclusions: Patient evaluations of difficulty swallowing and pain suggest benefits from AM use that are distinct from clinician-rated assessments.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

High-Dose-Rate Brachytherapy Boost for Prostate Cancer: Comparison of Two Different Fractionation Schemes

Purpose: This is a retrospective study comparing our experience with high-dose-rate (HDR) brachytherapy boost for prostate cancer, using two different fractionation schemes, 600 cGy Multiplication-Sign 3 fractions (patient group 1) and 950 cGy Multiplication-Sign 2 fractions (patient group 2). Methods and Materials: A total of 165 patients were treated for prostate cancer using external beam radiation therapy up to a dose of 45 Gy, followed by an HDR brachytherapy prostate radiation boost. Between July 1997 and Nov 1999, 64 patients were treated with an HDR boost of 600 cGy Multiplication-Sign 3 fractions; and between June 2000 and Nov 2005, 101 patients were treated with an HDR boost of 950 cGy Multiplication-Sign 2 fractions. All but 9 patients had at least one of the following risk features: pretreatment prostate-specific antigen (PSA) level >10, a Gleason score {>=}7, and/or clinical stage T3 disease. Results: Median follow-up was 105 months for group 1 and 43 months for group 2. Patients in group 2 had a greater number of high-risk features than group 1 (p = 0.02). Adjusted for comparable follow-up, there was no difference in biochemical no-evidence-of-disease (bNED) rate between the two fractionation scheme approaches, with 5-year Kaplan-Meier estimates of 93.5% in group 1 and 87.3% in group 2 (p = 0.19). The 5-year estimates of progression-free survival were 86% for group 1 and 83% for group 2 (p = 0.53). Among high-risk patients, there were no differences in bNED or PFS rate due to fractionation. Conclusions: Results were excellent for both groups. Adjusted for comparable follow-up, no differences were found between groups.

62 RADIOLOGY AND NUCLEAR MEDICINE↗