Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diamond”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Enhanced growth of high quality single crystal diamond by microwave plasma assisted chemical vapor deposition at high gas pressures

Single crystals of diamond up to 18 mm in thickness have been grown by microwave plasma assisted chemical vapor deposition at gas pressures of up to 350 torr. Growth rates of up to 165 {mu}m/h at 300 torr at high power density have been achieved. The processes were evaluated by optical emission spectroscopy. The high-quality single-crystal diamond grown at optimized conditions was characterized by UV-visible absorption and photoluminescence spectroscopy. The measurements reveal a direct relationship between residual absorption and nitrogen content in the gas chemistry. Fabrication of high quality single-crystal diamond at higher growth rates should be possible with improved reactor design that allows still higher gas synthesis pressures.

36 MATERIALS SCIENCE↗

CVD Diamond Dielectric Accelerating Structures

The electrical and mechanical properties of diamond make it an ideal candidate material for use in dielectric accelerating structures: high RF breakdown field, extremely low dielectric losses and the highest available thermoconductive coefficient. Using chemical vapor deposition (CVD) cylindrical diamond structures have been manufactured with dimensions corresponding to fundamental TM{sub 01} mode frequencies in the GHz to THz range. Surface treatments are being developed to reduce the secondary electron emission (SEE) coefficient below unity to reduce the possibility of multipactor. The diamond CVD cylindrical waveguide technology developed here can be applied to a variety of other high frequency, large-signal applications.

36 MATERIALS SCIENCE↗

Laser Patterning of Diamond. Part I. Characterization of Surface Morphology

As the use of diamond as a material for electronic and research applications increases, methods of patterning diamond will be required. In this work, single- and polycrystalline synthetic diamond samples were exposed to laser beams of different energies, wavelengths, and pulse durations. The effects of this exposure were characterized using optical microscopy, scanning electron microscopy, and atomic force microscopy. The threshold ablation energy density for 266 nm radiation with {approx} 30 ps pulse duration was measured to be {approx} 14 J/cm{sup 2}. The threshold for {approx} 10 ns pulses at the same wavelength was similar, but the ablated area displayed larger surface damage. The surface damage and the threshold energy increase significantly for 532 and 1064 nm radiations. Ablation performed using 213 nm radiation produced the most uniform surface. Changes in the ablated surface are presented in detail.

43 PARTICLE ACCELERATORS↗

Single crystal chemical vapor deposited diamond detectors for intensity-modulated radiation therapy applications

We report here on first intensity-modulated radiation therapy (IMRT) clinical tests performed at the Gustave Roussy Institute in France using one small (0.117 mm{sup 3}) synthetic single crystal diamond detector (SCDD). We report the comparison between the point doses evaluated with our detector, with a PTW semiflex air ionization chamber (0.125 cm{sup 3}) and calculated with the treatment planning system (TPS), respectively. The obtained results show a maximum difference of 2.3% for the diamond detector and of 4.6% for the ionization chamber, as compared with the TPS calculations. These very promising results show the potentiality of chemical vapor deposited SCDD for dosimetry of IMRT fields and opens up the field for diamond dosimeters toward novel applications such as very small beam monitoring.

36 MATERIALS SCIENCE↗

Bunch characteristics of an electron beam generated by a diamond secondary emitter amplifier

Electron bunches for high performance free electron lasers are subject to constraints on charge per bunch and pulse shape. A Diamond secondary emitter used in conjunction with a photocathode and drive laser has potential to enable a high brightness, high peak current photoinjector by increasing the effective quantum efficiency of the photocathode. A theoretical characterization of the bunches so produced has been heretofore absent. Using a combination of Monte Carlo and analytical models, the shape of the bunches, their transit time, and emission time constants are determined and shown to be sensitive to the accelerating field in the diamond flake, incident beam profile, doping, and surface conditions. Methods to allow for extension to regimes of technological interest in terms of diamond thickness, external field, and primary pulse shape are given.

07 ISOTOPE AND RADIATION SOURCES↗

Surface damages in diamond by Ar/O{sub 2} plasma and their effect on the electrical and electrochemical characteristics of boron-doped layers

Epitaxial single crystal and boron-doped diamond layers were exposed to reactive ion etching in Ar/O{sub 2} plasma (rf power of 25 W and self-bias of 100 V); and the electrical, structural, and electrochemical characteristics of the exposed surface were investigated. Angle-resolved x-ray photoemission spectroscopy (XPS) measurements revealed a nonuniform layer of amorphous carbon at the exposed surface with an average thickness of approximately 4 nm, as confirmed also by atomic force microscopy profiling of selectively etched areas. On highly boron-doped diamond, the plasma-induced damages resulted also in a nonconductive surface layer. This damaged and insulating surface layer remained resistant to graphite-etching chemicals and to rf oxygen plasma but it was removed completely in microwave hydrogen plasma at 700 deg. C. The surface characteristics after the H-plasma process followed by wet chemical oxidation were restored back to the initial state, as confirmed by XPS. Such ''recovery'' treatment had been applied to an all-diamond submicrometer electrode array initially patterned by an Ar/O{sub 2} plasma etching. The electrochemical characteristics of this electrode array were improved by more than two orders of magnitude, approaching theoretical limit for the given geometrical configuration.

36 MATERIALS SCIENCE↗

Multiscale three-dimensional simulations of charge gain and transport in diamond

A promising new concept of a diamond-amplified photocathode for generation of high-current, high-brightness, and low thermal emittance electron beams was recently proposed and is currently under active development. Detailed understanding of physical processes with multiple energy and time scales is required to design reliable and efficient diamond-amplifier cathodes. We have implemented models, within the VORPAL computational framework, to simulate secondary electron generation and charge transport in diamond in order to facilitate the investigation of the relevant effects involved. The models include inelastic scattering of electrons and holes for generation of electron-hole pairs, elastic, phonon, and charge impurity scattering. We describe the integrated modeling capabilities we developed and present results on charge gain and collection efficiency as a function of primary electron energy and applied electric field. We compare simulation results with available experimental data. The simulations show an overall qualitative agreement with the observed charge gain from transmission mode experiments and have enabled better understanding of the collection efficiency measurements.

43 PARTICLE ACCELERATORS↗

The induction of a graphite-like phase on diamond films by a Fe-coating/post-annealing process to improve their electron field emission properties

The electron field emission (EFE) process for diamond films was tremendously enhanced by Fe-coating and post-annealing processes. Microstructural analysis indicates that the mechanism for the improvement in the EFE process is the formation of nanographites with good crystallinity that surround the Fe (or Fe{sub 3}C) nanoclusters. Presumably the nanographites were formed via the reaction of Fe clusters with diamond films, viz. by the dissolution of carbons into Fe (or Fe{sub 3}C) clusters and the reprecipitation of carbon species to the surface of the clusters, a process similar to the growth of carbon nanotubes via Fe clusters as catalyst. Not only is a sufficiently high post-annealing temperature (900 deg. C) required but also a highly active reducing atmosphere (NH{sub 3}) is needed to give a proper microstructure for enhancing the EFE process. The best EFE properties are obtained by post-annealing the Fe-coated diamond films at 900 deg. C in an NH{sub 3} environment for 5 min. The EFE behavior of the films can be turned on at E{sub 0} = 1.9 V/{mu}m, attaining a large EFE current density of 315 {mu}A/cm{sup 2} at an applied field of 8.8 V/{mu}m (extrapolation using the Fowler-Nordheim model leads to J{sub e} = 40.7 mA/cm{sup 2} at a 20 V/{mu}m applied field).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improved diamond surfaces following lift-off and plasma treatments as observed by x-ray absorption spectroscopy

We have investigated the nature of the residual damage in diamond crystals following the ion implantation/graphitization ''lift-off'' process, using near-edge x-ray absorption fine structure spectroscopy and transmission electron microscopy. A defective but crystalline interface is found, which displays dense pre-edge unoccupied states and an almost complete loss of the core-level C 1s exciton signature. This residual crystalline damage is resistant to standard chemical etching, however a hydrogen plasma treatment is found to completely recover a pristine diamond surface. Analysis and removal of residual ion-induced damage is considered crucial to the performance of many diamond device architectures.

36 MATERIALS SCIENCE↗

Surface damage on diamond membranes fabricated by ion implantation and lift-off

Thin membranes with excellent optical properties are essential elements in diamond based photonic systems. Due to the chemical inertness of diamond, ion beam processing must be employed to carve photonic structures. One method to realize such membranes is ion-implantation graphitization followed by chemical removal of the sacrificial graphite. The interface revealed when the sacrificial layer is removed has interesting properties. To investigate this interface, we employed the surface sensitive technique of grazing angle channeled Rutherford backscattering spectroscopy. Even after high temperature annealing and chemical etching a thin layer of damaged diamond remains, however, it is removed by hydrogen plasma exposure.

36 MATERIALS SCIENCE↗

Thin conductive diamond films as beam intensity monitors for soft x-ray beamlines

Quantitative analysis of X-ray absorption and dichroism data requires knowledge of the beamline photon flux during the measurements. We show that thin conductive (B-doped) diamond thin films can be an alternative to the widely used gold meshes for monitoring the beam intensity of soft X-ray beamlines in situ. Limited by the carbon extended x-ray absorption fine structure oscillations, the diamond films become applicable beginning from about 600 eV photon energy, where the important transition metal edges and the rare-earth edges are found. The 100 nm and 250 nm thick free-standing diamond films were grown and tested against standard gold meshes in real-life dichroism experiments performed at beamline ID08 of the European Synchrotron Radiation Facility, Grenoble, France. Quantitative agreement was found between the two experimental data sets. The films feature an extremely high transmission of about 90% and, at the same time, yield a sufficiently strong and clean reference signal. Furthermore, the thin films do not affect the shape of the transmitted beam. X-rays passing mesh-type monitors are subject to diffraction effects, which widen the beam and become particularly disturbing for small beamsizes in the micrometer range.

36 MATERIALS SCIENCE↗

Use of a multichannel collimator for structural investigation of low-Z dense liquids in a diamond anvil cell: Validation on fluid H{sub 2} up to 5 GPa

We report the first application of a multichannel collimator (MCC) to perform quantitative structure factor measurements of dense low-Z fluids in a diamond anvil cell (DAC) using synchrotron x-ray diffraction. The MCC design, initially developed for the Paris-Edinburgh large volume press geometry, has been modified for use with diamond anvil cells. A good selectivity of the diffracted signal of the dense fluid sample is obtained due to a large rejection of the Compton diffusion from the diamond anvils. The signal to background ratio is significantly improved. We modify previously developed analytical techniques for quantitative measurement of the structure factor of fluids in DACs [J. H. Eggert, G. Weck, P. Loubeyre, and M. Mezouar, Phys. Rev. B 65, 174105 (2002)] to account for the contribution of the MCC. We present experimental results on liquids argon and hydrogen at 296 K to validate our method and test its limits, respectively.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Boron concentration profiling by high angle annular dark field-scanning transmission electron microscopy in homoepitaxial δ-doped diamond layers

To develop further diamond related devices, the concentration and spatial location of dopants should be controlled down to the nanometer scale. Scanning transmission electron microscopy using the high angle annular dark field mode is shown to be sensitive to boron doping in diamond epilayers. An analytical procedure is described, whereby local boron concentrations above 10{sup 20} cm{sup −3} were quantitatively derived down to nanometer resolution from the signal dependence on thickness and boron content. Experimental boron local doping profiles measured on diamond p{sup −}/p{sup ++}/p{sup −} multilayers are compared to macroscopic profiles obtained by secondary ion mass spectrometry, avoiding reported artefacts.

36 MATERIALS SCIENCE↗

Increasing the creation yield of shallow single defects in diamond by surface plasma treatment

Single Nitrogen-Vacancy (NV) centers in diamond close to the crystal surface are very promising magnetic field sensors with very high sensitivity. Here, we report the enhanced creation of very shallow (less than 3 nm below the diamond surface) NV centers by using fluorine and oxygen plasma treatment. We observe a four fold increase—from 0.11% to about 0.45% in the production yield when the sample surface is terminated with fluorine or oxygen atoms. This effect is explained by the stabilization of the NV's negative charge state which is influenced by the various defects present on the diamond surface.

36 MATERIALS SCIENCE↗

Temperature distributions in the laser-heated diamond anvil cell from 3-D numerical modeling

We present TempDAC, a 3-D numerical model for calculating the steady-state temperature distribution for continuous wave laser-heated experiments in the diamond anvil cell. TempDAC solves the steady heat conduction equation in three dimensions over the sample chamber, gasket, and diamond anvils and includes material-, temperature-, and direction-dependent thermal conductivity, while allowing for flexible sample geometries, laser beam intensity profile, and laser absorption properties. The model has been validated against an axisymmetric analytic solution for the temperature distribution within a laser-heated sample. Example calculations illustrate the importance of considering heat flow in three dimensions for the laser-heated diamond anvil cell. In particular, we show that a “flat top” input laser beam profile does not lead to a more uniform temperature distribution or flatter temperature gradients than a wide Gaussian laser beam.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Software optimization for electrical conductivity imaging in polycrystalline diamond cutters

We previously reported on an electrical conductivity imaging instrument developed for measurements on polycrystalline diamond cutters. These cylindrical cutters for oil and gas drilling feature a thick polycrystalline diamond layer on a tungsten carbide substrate. The instrument uses electrical impedance tomography to profile the conductivity in the diamond table. Conductivity images must be acquired quickly, on the order of 5 sec per cutter, to be useful in the manufacturing process. This paper reports on successful efforts to optimize the conductivity reconstruction routine, porting major portions of it to NVIDIA GPUs, including a custom CUDA kernel for Jacobian computation.

36 MATERIALS SCIENCE↗

Ultra-thin nanocrystalline diamond membranes as pressure sensors for harsh environments

Glass and diamond are suitable materials for harsh environments. Here, a procedure for fabricating ultra-thin nanocrystalline diamond membranes on glass, acting as an electrically insulating substrate, is presented. In order to investigate the pressure sensing properties of such membranes, a circular, highly conductive boron-doped nanocrystalline diamond membrane with a resistivity of 38 mΩ cm, a thickness of 150 nm, and a diameter of 555 μm is fabricated in the middle of a Hall bar structure. During the application of a positive differential pressure under the membrane (0–0.7 bar), four point piezoresistive effect measurements are performed. From these measurements, it can be concluded that the resistance response of the membrane, as a function of differential pressure, is highly linear and sensitive.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photonic nano-structures on (111)-oriented diamond

We demonstrate the fabrication of single-crystalline diamond nanopillars on a (111)-oriented chemical vapor deposited diamond substrate. This crystal orientation offers optimal coupling of nitrogen-vacancy (NV) center emission to the nanopillar mode and is thus advantageous over previous approaches. We characterize single native NV centers in these nanopillars and find one of the highest reported saturated fluorescence count rates in single crystalline diamond in excess of 10{sup 6} counts per second. We show that our nano-fabrication procedure conserves the preferential alignment as well as the spin coherence of the NVs in our structures. Our results will enable a new generation of highly sensitive probes for NV magnetometry and pave the way toward photonic crystals with optimal orientation of the NV center's emission dipole.

36 MATERIALS SCIENCE↗