Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density modification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Comet flyby sample return experiment

Dust from several comets can be returned to earth with minimum propulsion effort after a high-speed encounter. The collection concept involves the capture of individual dust particles by condensation in a cell after vaporization by a thin diaphragm. This collection concept has been validated in laboratory tests. To compensate for the slower laboratory velocities in a two-stage light-gas gun, higher-density metals (Zn and Cd) have been used for particles and diaphragms to simulate hypervelocity vaporization. Teflon has proved to be a suitable material for the collection cell; more than 50 percent of the vaporized projectile material has been recovered by chemical etching from such cells. Hypervelocity-impact parameters (such as diaphragm-to-projectile ratio, hole size, and plume angles) determined by tests permit the modification of existing analytical models. These new findings are necessary for flyby cometary experiments.

Tsou, P.↗
NASA NTRS1994

Comparisons of neural networks to standard techniques for image classification and correlation

Neural network techniques for multispectral image classification and spatial pattern detection are compared to the standard techniques of maximum-likelihood classification and spatial correlation. The neural network produced a more accurate classification than maximum-likelihood of a Landsat scene of Tucson, Arizona. Some of the errors in the maximum-likelihood classification are illustrated using decision region and class probability density plots. As expected, the main drawback to the neural network method is the long time required for the training stage. The network was trained using several different hidden layer sizes to optimize both the classification accuracy and training speed, and it was found that one node per class was optimal. The performance improved when 3x3 local windows of image data were entered into the net. This modification introduces texture into the classification without explicit calculation of a texture measure. Larger windows were successfully used for the detection of spatial features in Landsat and Magellan synthetic aperture radar imagery.

Paola, Justin D.↗
DOE OSTI2026

Facet Preferencing by Chemical Substitution Controls Semi-Hydrogenation Selectivity in Ternary Pyrite-Type Intermetallic Compounds

Intermetallic compounds serve as model catalysts for selective hydrogenation reactions, offering precise control over the active site composition(s), geometric and electronic structure. The addition of a third element to form a ternary intermetallic alters the exposed crystal facet(s), demonstrating a strategy to impart improved catalytic behavior in intermetallic catalysts. The site-specific substitution of a small fraction of Pd atoms with Au in pyrite-type PdSb 2 results in the preferential exposure of the (100) facet over the (111) facet. Electron back scattered diffraction and density functional theory calculations confirm the facet change upon the substitution of Pd with Au to form the ternary Pd 1−x Au x Sb 2 (0.075 ≤ x ≤ 0.25). The (100) facet demonstrates higher net alkene selectivity due to significantly weaker alkene binding compared to the (111) facet. Distinct from our prior work on chemical substitution to directly alter the active site composition, this work demonstrates the indirect modification of active sites via preferential facet exposure.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Enhanced CO 2 Reactive Capture and Conversion Using Aminothiolate Ligand–Metal Interface

Metallic catalyst modification by organic ligands is an emerging catalyst design in enhancing the activity and selectivity of electrocatalytic carbon dioxide (CO 2 ) reactive capture and reduction to value-added fuels. However, a lack of fundamental science on how these ligand–metal interfaces interact with CO 2 and key intermediates under working conditions has resulted in a trial-and-error approach for experimental designs. With the aid of density functional theory calculations, we provided a comprehensive mechanism study of CO 2 reduction to multicarbon products over aminothiolate-coated copper (Cu) catalysts. Our results indicate that the CO 2 reduction performance was closely related to the alkyl chain length, ligand coverage, ligand configuration, and Cu facet. The aminothiolate ligand–Cu interface significantly promoted initial CO 2 activation and lowered the activation barrier of carbon–carbon coupling through the organic (nitrogen (N)) and inorganic (Cu) interfacial active sites. Experimentally, the selectivity and partial current density of the multicarbon products over aminothiolate-coated Cu increased by 1.5-fold and 2-fold, respectively, as compared to the pristine Cu at –1.16 V RHE , consistent with our theoretical findings. Furthermore, this work highlights the promising strategy of designing the ligand–metal interface for CO 2 reactive capture and conversion to multicarbon products.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1980

F region above Kauai - Measurement, model, modification

Results of the Lagopedo II experiment conducted from Kauai, Hawaii to investigate the ionospheric modification that occurs when rocket combustion products are introduced into the O(+)-rich F region are presented. The experiment involved the detonation of a chemical explosion in the F2 peak accompanied by rocket-borne measurements of ion composition and electron content in the vicinity of the explosion. The experimental data is found to be in good agreement with the predictions of a model of the nighttime ion densities in the midlatitude laminar ionosphere, with the exception of N2(+) densities before the explosion. H2O(+) and H3O(+) currents produced by considerable H2O outgassing from the rocket are used to determine a H3O(+)/H2O(+) dissociative recombination rate averaging 1.6 to 1.08, depending on model assumptions. At the time of the explosion, an ionic void 1 km in radius is observed, the boundary of which is characterized by a steep gradient in ionic densities. Evidence of variations in the concentrations of ambient ion species, new reactant species and ionic depletion by sweeping is also obtained.

Johnson, C. Y.↗
DOE OSTI2021

Identification of Active Metal Carbide and Nitride Catalytic Facets for Hydrodeoxygenation Reactions

The catalytic hydrodeoxygenation (HDO) reaction is of considerable interest for biomass conversion to valuable chemicals and fuels, where one of the critical bottlenecks is the lack of cost-effective and efficient catalysts. To discover cost-efficient catalysts for the HDO reaction, we employed a density functional theory-based hierarchical catalyst design strategy based on catalytic descriptors, reaction energy profiles, and microkinetic modeling (MKM). We focused on the carbide and nitride catalyst space, for which we calculated 121 catalyst surfaces of Mo 2 C, MoC, Mo 2 N, W 2 C, NbC, VC, VN, and NbN catalysts. Based on the computed surface energies, reaction energies of oxygen removal, carbon binding strength, and the surface area of nanoparticles, the likely active facets are the Mo 2 C(111), MoC(011), VN(100), Mo 2 N(001), Mo 2 N(011), and Mo 2 N(100) surfaces. Further, detailed energy profiles were obtained, and MKM was performed for a model reaction (glycolaldehyde + 2H 2 . ethylene + 2H 2 O) on the Mo 2 C(111), VN(100), and MoC(100) surfaces. Based on the computed volcano map obtained from MKM, the predicted active facets for this HDO reaction are the Mo 2 C(111), MoC(011), VN(011), Mo 2 N(001), Mo 2 N(011), and Mo 2 N(100) surfaces. Additionally, none of the carbide and nitride catalyst surfaces are located in the optimal catalytic activity part. Therefore, it is essential to modify the catalyst via adding dopants or alloying to improve the catalytic activity. Catalytic modifications that can destabilize the surface adsorption of O*/H 2 O* and decrease the energy barriers of O-H bond formation are recommended to facilitate the HDO on the carbide and nitride catalysts. These a priori investigations provide guidelines for future low-cost HDO catalyst development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Human-induced changes to the global ocean water masses and their time of emergence

The World Ocean is rapidly changing, with global and regional modification of temperature and salinity, resulting in widespread and irreversible impacts. While the most pronounced observed temperature and salinity changes are located in the upper ocean, changes in water masses at depth have been identified and will probably strengthen in the future. In this study, using 11 climate models, we define when anthropogenic temperature and salinity changes are expected to emerge from natural variability in the ocean interior along density surfaces. The models predict that in 2020, 20–55% of the Atlantic, Pacific and Indian basins have an emergent anthropogenic signal; reaching 40–65% in 2050 and 55–80% in 2080. The well-ventilated Southern Ocean water masses emerge very rapidly, as early as the 1980–1990s, while the Northern Hemisphere water masses emerge in the 2010–2030s. Our results highlight the importance of maintaining and augmenting an ocean observing system capable of detecting and monitoring persistent anthropogenic changes.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1973

Processing of Rigidized Rei-mullite Insulative Composites

Systematic development and evaluation of ceramic fiber Mullite are summarized: (1) Major reductions in thermal protection system weight have been achieved by reducing the density and thermal conductivity of the insulation by 20 and 25 percent; (2) already adequate structural margins-of-safety have been greatly enhanced by increasing the tensile strength and strain-to-failure capabilities of the insulation by factors of 3 and 2; (3) cost effectiveness has been increased through the achievement of a high degree of uniformity and reproducibility of properties and through process simplification and binder modifications; and (4) maximization of multimission capability at surface temperatures of 1644 K has been achieved through firing cycle adjustments and the development of a material with high dimensional stability.

Gebhardt, J. J.↗
NASA NTRS1993

Study of auroral dynamics with combined spacecraft and incoherent-scatter radar data

We have examined Sondrestrom incoherent-scatter radar observations of ionospheric plasma density and temperature distributions, as well as measurements of F-region ion drifts that were made during a prenoon pass by the DMSP-F7 satellite through the radar field of view. The spacecraft traversed a region of intense electron precipitation with a characteristic energy below approximately 200 eV. Particles with such low characteristic energies are believed to originate, either directly or indirectly, in the magnetosheath. The precipitation region had a width of about 2 deg invariant latitude. The corotating radar observed a patch of enhanced electron density and elevated electron temperature in the F2 region between about 10.5 and 12 magnetic local time in the same invariant latitude range where DMSP-F7 detected the soft-electron flux. The ion drift pattern, also obtained by radar, shows that it is unlikely that the plasma patch was produced by solar radiation and advected into the radar field of view. We suggest that the radar observed modifications of the ionospheric plasma distribution, which resulted from direct entry of magnetosheath electrons into the magnetosphere and down to ionospheric altitudes. Model calculations of the ionospheric response to the observed electron flux support our interpretation.

Watermann, Juergen↗
NASA NTRS1994

Ionospheric footprint of magnetosheathlike particle precipitation observed by an incoherent scatter radar

We have examined Sondrestrom incoherent scatter radar observations of ionospheric plasma density and temperature distributions and measurements of F region ion drifts that were made during a prenoon pass of the Defense Meteorological Satellite Program (DMSP)-F7 satellite through the radar field of view. The spacecraft traversed a region of intense electron precipitation with a characteristic energy below approximately 200 eV. Particles with such low characteristic energies are believed to be directly or indirectly of magnetosheath origin. The precipitation region had a width about 2 deg invariant latitude and covered the low-latitude boundary layer (LLBL), the cusp, and the equatorward section of the plasma mantle (PM). The corotating radar observed a patch of enhanced electron density and elevated electron temperature in the F2 region between about 10.5 and 12 magnetic local time in the same invariant latitude range where DMSP-F7 detected the soft-electron flux. The ion drift pattern, also obtained by radar, shows that it is unlikely that the plasma patch was produced by solar radiation and advected into the radar field of view. We suggest that the radar observed modifications of the ionospheric plasma distribution, which resulted from direct entry of magnetosheath electrons into the magnetosphere and down to ionospheric altitudes. Model calculations of the ionospheric response to the observed electron precipitation support our interpretation. The spectral characteristics of the electron flux in the LLBL, cusp, and equatorward section of the PM were in this case too similar to allow to distinguish between them by using incoherent scatter radar measurements only.

Watermann, Jurgen↗
NASA NTRS2001

The Importance of Optical Pathlength Control for Plasma Absorption Measurements

An inductively coupled GEC Cell with modified viewing ports has been used to measure in-situ absorption in CF4 plasmas via Fourier Transform Infrared Spectroscopy, and the results compared to those obtained in a standard viewport configuration. The viewing ports were modified so that the window boundary is inside, rather than outside, of the GEC cell. Because the absorption obtained is a spatially integrated absorption, measurements made represent an averaging of absorbing species inside and outside of the plasma. This modification is made to reduce this spatial averaging and thus allow a more accurate estimation of neutral species concentrations and temperatures within the plasmas. By reducing this pathlength, we find that the apparent CF4 consumption increases from 65% to 95% and the apparent vibrational temperature of CF4 rises by 50-75 K. The apparent fraction of etch product SiF4 decreases from 4% to 2%. The data suggests that these density changes may be due to significant temperature gradients between the plasma and chamber viewports.

Cruden, Brett A.↗
NASA NTRS1998

Capture of Hypervelocity Particles with Low-Density Aerogel

Recent impact experiments conducted at Johnson Space Center supported a space-exposed flight instrument called the orbital debris collector (ODC) to see whether SiO2 acrogel performed adequately as a collector to capture cosmic dust particles and/or manmade debris, or whether additional development is needed. The first ODC was flown aboard the Mir for 18 months, while the second will be flown aboard a spacecraft (Stardust, to be launched in 1999) that will encounter the comet Wild 2 and return to Earth. Aerogels are highly porous materials that decelerate high-velocity particles without substantial melting or modifications to the particles' components; in other denser materials, these particles would melt or vaporize upon impact. The experimental data in this report must be considered somewhat qualitative because they are characterized by substantial, if not intolerable, scatter, possibly due to experimental difficulties in duplicating given sets of initial impact conditions. Therefore, this report is a chronological guide of the experimenters' attempts, difficulties, progress, and evaluations for future tests.

Hoerz, Friedrich↗
NASA NTRS1981

Anisotropic magnetohydrodynamic turbulence in a strong external magnetic field

A strong external dc magnetic field introduces a basic anisotropy into incompressible magnetohydrodynamic turbulence. The modifications that this is likely to produce in the properties of the turbulence are explored for the high Reynolds number case. The conclusion is reached that the turbulent spectrum splits into two parts: an essentially two dimensional spectrum with both the velocity field and magnetic fluctuations perpendicular to the dc magnetic field, and a generally weaker and more nearly isotropic spectrum of Alfven waves. A minimal characterization of the spectral density tensors is given. Similarities to measurements from the Culham-Harwell Zeta pinch device and the UCLA Macrotor Tokamak are remarked upon, as are certain implications for the Belcher and Davis measurements of magnetohydrodynamic turbulence in the solar wind.

Montgomery, D.↗
NASA NTRS1982

Quantitative tests of a steady state theory of solar wind electrons

A comparison is made of IMP 6, 7 and 8 electron data with the predictions of a solar wind electron steady state theory in which the control of transport by the macroscopic interplanetary electric and magnetic fields, as well as elastic Coulomb collisions with solar wind protons and thermal electrons, is assumed. While a ratio of forward to backward phase density for field-aligned extrathermal electrons of 6:1 is predicted, electron distribution measurements within the high speed solar wind show this ratio to be typically about an order of magnitude larger. A set of solar wind bulk speed anticorrelations predicted by the theory on the basis of a larger set of assumptions cannot be found in the IMP electron data set, so that improved agreement may require such modifications of the theory's assumptions as the inclusion of inelastic Coulomb and/or wave electron collisions.

Feldman, W. C.↗
NASA NTRS2011

A New Inversion Routine to Produce Vertical Electron-Density Profiles from Ionospheric Topside-Sounder Data

Two software applications have been produced specifically for the analysis of some million digital topside ionograms produced by a recent analog-to-digital conversion effort of selected analog telemetry tapes from the Alouette-2, ISIS-1 and ISIS-2 satellites. One, TOPIST (TOPside Ionogram Scalar with True-height algorithm) from the University of Massachusetts Lowell, is designed for the automatic identification of the topside-ionogram ionospheric-reflection traces and their inversion into vertical electron-density profiles Ne(h). TOPIST also has the capability of manual intervention. The other application, from the Goddard Space Flight Center based on the FORTRAN code of John E. Jackson from the 1960s, is designed as an IDL-based interactive program for the scaling of selected digital topside-sounder ionograms. The Jackson code has also been modified, with some effort, so as to run on modern computers. This modification was motivated by the need to scale selected ionograms from the millions of Alouette/ISIS topside-sounder ionograms that only exist on 35-mm film. During this modification, it became evident that it would be more efficient to design a new code, based on the capabilities of present-day computers, than to continue to modify the old code. Such a new code has been produced and here we will describe its capabilities and compare Ne(h) profiles produced from it with those produced by the Jackson code. The concept of the new code is to assume an initial Ne(h) and derive a final Ne(h) through an iteration process that makes the resulting apparent-height profile fir the scaled values within a certain error range. The new code can be used on the X-, O-, and Z-mode traces. It does not assume any predefined profile shape between two contiguous points, like the exponential rule used in Jackson s program. Instead, Monotone Piecewise Cubic Interpolation is applied in the global profile to keep the monotone nature of the profile, which also ensures better smoothness in the final profile than in Jackson s program. The new code uses the complete refractive index expression for a cold collisionless plasma and can accommodate the IGRF, T96, and other geomagnetic field models.

Wang, Yongli↗
DOE OSTI2022

Atomically Thin, Ionic–Covalent Organic Nanosheets for Stable, High–Performance Carbon Dioxide Electroreduction

The incorporation of charged functional groups is effective to modulate the activity of molecular complexes for the CO 2 reduction reaction (CO 2 RR), yet long-term heterogeneous electrolysis is often hampered by catalyst leaching. Herein, an electrocatalyst of atomically thin, cobalt-porphyrin-based, ionic–covalent organic nanosheets (CoTAP-iCONs) is synthesized via a post-synthetic modification strategy for high-performance CO 2 -to-CO conversion. The cationic quaternary ammonium groups not only enable the formation of monolayer nanosheets due to steric hindrance and electrostatic repulsion, but also facilitate the formation of a *COOH intermediate, as suggested by theoretical calculations. Consequently, CoTAP-iCONs exhibit higher CO 2 RR activity than other cobalt-porphyrin-based structures: an 870% and 480% improvement of CO current densities compared to the monomer and neutral nanosheets, respectively. Additionally, the iCONs structure can accommodate the cationic moieties. In a flow cell, CoTAP-iCONs attain a very small onset overpotential of 40 mV and a stable total current density of 212 mA cm –2 with CO Faradaic efficiency of >95% at –0.6 V for 11 h. Further coupling the flow electrolyzer with commercial solar cells yields a solar-to-CO conversion efficiency of 13.89%. Finally, this work indicates that atom-thin, ionic nanosheets represent a promising structure for achieving both tailored activity and high stability.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Tuning charge carrier dynamics through spacer cation functionalization in layered halide perovskites: an ab initio quantum dynamics study

Dion–Jacobson (DJ) phase two-dimensional (2D) hybrid halide perovskites are promising for environmentally stable optoelectronic device applications due to their attractive photophysical properties, including long charge carrier lifetime and partially suppressed non-radiative losses. However, the atomistic details of the structure–property relationship are severely limited, which substantially restricts the strategic materials designed for these layered halide perovskites (LHPs). Here, we combine nonadiabatic molecular dynamics and time-domain density functional theory to understand the effects of spacer cation functionalization on the ground and excited-state charge carrier dynamics in DJ phase LHPs. Our in-depth study reveals that the fluorination of spacer cations considerably restricts the thermal motions of LHPs at ambient conditions. The compact structure weakens the overall electron–phonon interactions and reduces the thermal fluctuations of the band edges in real-time. These dynamic modifications partially mitigate the non-radiative recombination, prolonging the lifetime of photogenerated charge carriers. The suppressed carrier loss mechanism strongly suggests that the fluorinated spacer cation-based LHPs would exhibit enhanced performance as optoelectronic materials. These systematic simulations of excited state carrier dynamics elaborate that chemically viable functionalization of the spacer cations is a robust approach to improve the photophysical properties of 2D halide perovskites strategically. These insights also guide us to propose a few potential strategies to design highly beneficial spacer cations of LHPs that can be introduced in next-generation optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Collisional stopping power of ions in warm dense matter

Here, a model for the collisional stopping of ions on free electrons in warm dense matter is developed and explored. It is based on plasma kinetic theory, but with modifications to address the warm dense matter regime. Specifically, it uses the Boltzmann-Uehling-Uhlenbeck kinetic equation to incorporate effects of Fermi degeneracy of electrons. The cross section is computed from quantum scattering of electrons and ions occurring via the potential of mean force derived from an average atom model, which incorporates effects of strong Coulomb correlations. Predictions from this model show comparable accuracy to results from time-dependent density functional theory calculations for deuterium near solid density and a temperature of several electronvolts, at a fraction of the computational cost. Further, the model captures the transition of a plasma from the classical limit to the degenerate limit, including qualitative behaviors of solid state theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗