Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density functional theory development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Load-Displacement Relation and Gap Distribution Between Rough Surfaces: Partial Differential Equations Approach

We develop a theoretical model to predict the load-displacement relation and probability density function for gaps between contacting rough surfaces. We derive partial differential equations from the previous model (Joe et al., 2018), and extend them to the non-adhesive contact problem. The predictions of the present theory are compared with numerical results using the Green's function molecular dynamics algorithm, and a good agreement is obtained.

adhesion↗
DOE OSTI2023

Strengthening model development and effects of low diffusing solutes to coarsening resistance in aluminum alloys

A modified Orowan strengthening model is proposed to account for finite rod-shaped precipitates with hemispherical caps in aluminum alloy systems. A combined computational and experimental approach is used to study the influences of anisotropic Orowan looping and solute-dislocation interaction on temperature-dependent yield strength. Here, the strengthening model is validated with a dataset containing 297 experimental precipitate geometries, chemistries, temperatures, and strength measurements, and achieves a strong predictive correlation of 0.8713 with experimentally measured yield strengths. Under conditions that are applicable to coarsening, constant particle volume fraction and aspect ratio, the model predicts that short rod precipitates provide far superior strengthening effects compared to plate precipitates. A cast Al-Si-Mg-Cu alloy with rod-shaped Q-phase (Al 3 Cu 2 Mg 9 Si 7 ) precipitates was developed with a novel chemistry exploring the use of low-diffusivity elements (Mn, Ni, V, Zr) to limit precipitate coarsening. The thermodynamic behavior of Mn, Ni, V, and Zr across the Q-phase interface is examined using transmission electron microscopy (TEM), first-principles density-functional theory (DFT) calculations. and atom-probe tomography (APT). DFT calculations utilizing TEM identified Q-phase/Al-matrix interfaces show that Mn, Ni, V, and Zr preferentially segregate to the Q-phase precipitate boundaries which suggests inhibition of precipitate coarsening and higher strengths after temperature exposure. Atom-probe tomography confirms solute atom partitioning/segregation at the Q-phase/Al-matrix interface, found in the modified commercial AS7GU alloy (A356 +0.5%Cu), which supports these observations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Machine Learning-Driven Solvent Screening for Biobased 2,3-Butanediol Extraction

Biobased 2,3-butanediol (2,3-BDO) is a valuable biomass-derived chemical due to its versatility in being transformed into a wide variety of products. However, the separation and purification of 2,3-BDO from fermentation broth remain a significant challenge owing to its high boiling point and hydrophilic nature. Herein, we developed a machine learning (ML)-based screening workflow that uses molecular calculations as training data and requires only a small number of experimental measurements for validation to identify alternative solvent candidates for the liquid–liquid extraction (LLE) of 2,3-BDO from aqueous solution. In particular, 130 density functional theory (DFT) calculations with the implicit solvation method not only built a correlation between the computational partition coefficient and the experimental distribution coefficient of 2,3-BDO but also parameterized an Extra-Trees ML model to screen the distribution coefficient for a wider range of 6717 organic solvents. The experimental measurements of only 24 solvents were needed to validate the computational results. A list of 50 prioritized solvents was proposed for 2,3-BDO LLE, and seven additional experimental measurements were conducted to further verify our selected solvents. The impact of the extraction temperature and solvent-to-feed ratio was also investigated for selected solvents in experiments. Furthermore, this work suggested alternative solvents for 2,3-BDO LLE and proposed a versatile workflow that requires fewer experiments and can be applied to a broader range of LLE studies.

Extraction↗
DOE OSTI2024

On-the-fly machine learned force fields for the study of warm dense matter: Application to diffusion and viscosity of CH

We develop a framework for on-the-fly machine learned force field (MLFF) molecular dynamics (MD) simulations of warm dense matter (WDM). In particular, we employ an MLFF scheme based on the kernel method and Bayesian linear regression, with the training data generated from the Kohn–Sham density functional theory (DFT) using the Gauss spectral quadrature method, within which we calculate energies, atomic forces, and stresses. We verify the accuracy of the formalism by comparing the predicted properties of warm dense carbon with recent Kohn–Sham DFT results in the literature. In so doing, we demonstrate that ab initio MD simulations of WDM can be accelerated by up to three orders of magnitude, while retaining ab initio accuracy. We apply this framework to calculate the diffusion coefficients and shear viscosity of CH at a density of 1 g/cm3 and temperatures in the range of 75 000–750 000 K. We find that the self- and inter-diffusion coefficients and the viscosity obey a power law with temperature, and that the diffusion coefficient results suggest a weak coupling between C and H in CH. In addition, we find agreement within standard deviation with previous results for C and CH but disagreement for H, demonstrating the need for ab initio calculations as presented here.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Maximizing efficiency of dataset compression for machine learning potentials with information theory

Machine learning interatomic potentials (MLIPs) balance high accuracy and lower costs compared to density functional theory calculations, but their performance often depends on the size and diversity of training datasets. Large datasets improve model accuracy and generalization but are computationally expensive to produce and train on, while smaller datasets risk discarding rare but important atomic environments and compromising MLIP accuracy/reliability. Here, we develop an information-theoretical framework to quantify the efficiency of dataset compression methods and propose an algorithm that maximizes this efficiency. By framing atomistic dataset compression as an instance of the minimum set cover (MSC) problem over atom-centered environments, our method identifies the smallest subset of structures that contains as much information as possible from the original dataset while pruning redundant information. The approach is extensively demonstrated on the GAP-20 and TM23 datasets and validated on 64 varied datasets from the ColabFit repository. Across all cases, MSC consistently retains outliers, preserves dataset diversity, and reproduces the long-tail distributions of forces even at high compression rates, outperforming other subsampling methods. Furthermore, MLIPs trained on MSC-compressed datasets exhibit reduced error for out-of-distribution data even in low-data regimes. We explain these results using an outlier analysis and show that such quantitative conclusions could not be achieved with conventional dimensionality reduction methods. The algorithm is implemented in the open-source QUESTS package and can be used for several tasks in atomistic modeling, from data subsampling, outlier detection, and training improved MLIPs at a lower cost.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Flat band driven itinerant magnetism in the Co-pnictides CaCo 2⁢ As 2 and LaCo 2 ⁢P 2

Flat bands can induce strong electron correlation effects that help stabilize both magnetic and superconducting states. Here, in this study, we carry out angle-resolved photoemission spectroscopy and density functional theory calculations to study the electronic structure of the Co-pnictides CaCo 2 ⁢As 2 and LaCo 2 ⁢P 2 . We find that the 𝑘 𝑧 Fermi topology of ferromagnetic LaCo 2 ⁢P 2 is markedly two-dimensional, while the antiferromagnetic CaCo 2 ⁢As 2 develops a 3D Fermi surface described by a zigzaglike band dispersion perpendicular to the Co-As plane. Furthermore, the magnetism is driven by the electronic correlations of the flat bands with 𝑑 𝑥⁢𝑦 and 𝑑 𝑧 2 orbital character at the Fermi level. Our results link the electronic dimensionality and the magnetic order and emphasize the critical role of the As-As and P-P bond strength along the 𝑐 direction to understand the electronic band structure and the rich phase diagram of transition metal pnictides.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Machine Learned Force Field Modeling of Metal Organic Frameworks for CO2 Direct Air Capture

Direct air capture (DAC) is a method for removing CO2 directly from air. Metal organic frameworks (MOFs) have been studied as DAC sorbent materials because of their structural and chemical diversity. Thermodynamic calculations using classical force fields are often used to evaluate MOFs for their performance in separations such as CO2 capture. Machine-learned force fields (MLFFs) can use machine learning to form quantitative relationships between a material’s chemical structure and the forces and energies predicted by more accurate quantum mechanical calculations, such as dispersion-corrected density functional theory (DFT). These descriptions of forces and energies can be used to improve the accuracy of adsorption calculations. In this work, classical models were used to pre-screen MOFs for CO2 capture. DFT calculations were then used to examine the adsorption mechanism. Next, MLFF models were developed for MOFs to achieve DFT-level accuracy for the forces and energies associated with MOF flexibility and CO2 adsorption. These methods were parametrized based on thousands of DFT calculations of CO2 in flexible MOFs and used to predict MOF structural properties as well as CO2 adsorption properties.

Findley, John↗
DOE OSTI2023

Extending the thermodynamic form factor bootstrap program: multiple particle-hole excitations, crossing symmetry, and reparameterization invariance

In this study, we further the thermodynamic bootstrap program which involves a set of recently developed ideas used to determine thermodynamic form factors of local operators in integrable quantum field theories. These form factors are essential building blocks for dynamic correlation functions at finite temperatures or non-equilibrium stationary states. In this work we extend this program in three ways. Firstly, we demonstrate that the conjectured annihilation pole axiom is valid in the low energy particle-hole excitations. Secondly, we introduce a crossing relation, which establishes a connection between form factors with different excitation content. Typically, the crossing relation is a consequence of Lorentz invariance, but due to the finite energy density of the considered states, Lorentz invariance is broken. Nonetheless a crossing relation involving excitations with both particles and holes can established using the finite volume representation of the thermodynamic form factors. Finally, we demonstrate that the thermodynamic form factors satisfy a reparameterization invariance, an invariance which encompasses crossing. Reparameterization invariance exploits the fact that the details of the representation of the thermodynamic state are unimportant. In the course of developing these results, we demonstrate the internal consistency of the thermodynamic form factor bootstrap program in a number of ways. Finally, we provide explicit computations of form factors of conserved charges and densities with crossed excitations and show our results can be used to infer information about thermodynamic form factors in the Lieb-Liniger model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Unlocking enhanced gas capture via core scrambling of porous-organic cages

The demand for low-cost, low-energy, and highly selective gas capture and separations is an ongoing driver of porous material development. Porous liquids have been identified as a promising gas separation material by creating permanent porosity in inorganic solvents through inclusion of nanoporous materials that sterically exclude solvent from their internal porosity. Among the nanoporous materials that can be used to form porous liquids, porous-organic cages (POCs) have been one of the most popular due to the inherent tunability of POCs. “Scrambled” POCs with varying functionalities on the POC vertices have been developed and incorporated into porous liquid compositions, increasing their gas adsorption capacity. An unexplored avenue to tailor the properties of porous liquids is through scrambling the functionality of the core of the POC. Here, therefore, we have synthesized a new POC, a CC3-OH derivative with scrambled hydroxides on the core and evaluated the impact on the CO 2 uptake capacity in silicon oil-based porous liquids. Core scrambling of the POC resulted in a twofold increase CO 2 adsorption capacity in the porous liquid, an emergent property that is a dramatic increase beyond a linear combination of the gas adsorption capacity of the neat solvent and the POC. Density functional theory modeling of the CC3 POC and its hydroxide-based derivatives identified that free rotation of the linker hydroxide allowed for forced interaction between the CO 2 molecule and the hydroxide in the pore window. Solvation of the POC may release scrambled core hydroxides from intramolecular bonding with a neighboring imine, allowing for increased gas uptake in the porous liquid over the neat POC. These results identify a key structural relationship of POCs that enables emergent properties in porous liquids and can guide future development of liquid phase gas capture and separation materials for environmental and industrial applications.

Gas capture↗
DOE OSTI2024

Coexistence of ferromagnetism and antiferromagnetic dimers in topological insulators

The addition of magnetic impurities in topological insulators (TIs) can drive ferromagnetic order that leads to quantum anomalous Hall transport well below the Curie temperature. The fragility of the quantized regime has been ascribed to the random nature of the magnetic moment distribution. Here, we refine this hypothesis by using inelastic neutron scattering and density-functional theory calculations to show that two antagonistic components define the magnetism in Mn-substituted SnTe, thereby limiting the effectiveness of dilute magnetic TIs. One component is strongly bound antiferromagnetic dimers that compete with ferromagnetic order. In conclusion, the other component consists of undimerized moments where ferromagnetic order develops via long-range interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Implications of Microstructure in Helium-Implanted Nanocrystalline Metals

Helium bubbles are known to form in nuclear reactor structural components when displacement damage occurs in conjunction with helium exposure and/or transmutation. If left unchecked, bubble production can cause swelling, blistering, and embrittlement, all of which substantially degrade materials and—moreover—diminish mechanical properties. On the mission to produce more robust materials, nanocrystalline (NC) metals show great potential and are postulated to exhibit superior radiation resistance due to their high defect and particle sink densities; however, much is still unknown about the mechanisms of defect evolution in these systems under extreme conditions. Here, the performances of NC nickel (Ni) and iron (Fe) are investigated under helium bombardment via transmission electron microscopy (TEM). Bubble density statistics are measured as a function of grain size in specimens implanted under similar conditions. While the overall trends revealed an increase in bubble density up to saturation in both samples, bubble density in Fe was over 300% greater than in Ni. To interrogate the kinetics of helium diffusion and trapping, a rate theory model is developed that substantiates that helium is more readily captured within grains in helium-vacancy complexes in NC Fe, whereas helium is more prone to traversing the grain matrices and migrating to GBs in NC Ni. Our results suggest that (1) grain boundaries can affect bubble swelling in grain matrices significantly and can have a dominant effect over crystal structure, and (2) an NC-Ni-based material can yield superior resistance to irradiation-induced bubble growth compared to an NC-Fe-based material and exhibits high potential for use in extreme environments where swelling due to He bubble formation is of significant concern.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Importance of Van der Waals Interactions in Hydrogen Adsorption on a Silicon-carbide Nanotube Revisited with vdW-DFT and Quantum Monte Carlo

Density functional theory (DFT) is a valuable tool for calculating adsorption energies toward designing materials for hydrogen storage. However, dispersion forces being absent from the local/semi-local theory, it remains unclear as to how the consideration of van der Waals (vdW) interactions affects such calculations. For the first time, we applied diffusion Monte Carlo (DMC) to evaluate the adsorption characteristics of a hydrogen molecule on a (5,5) armchair silicon-carbide nanotube (H 2 -SiCNT). Within the DFT framework, we benchmarked various exchange-correlation functionals, including those recently developed for treating dispersion or vdW interactions. We found that the vdW-corrected DFT methods agree well with DMC, whereas the local (semilocal) functional significantly over (under)-binds. Furthermore, we fully optimized the H 2 -SiCNT geometry within the DFT framework and investigated the correlation between the structure and charge density. The vdW contribution to the adsorption was found to be non-negligible at similar to 1 kcal/mol per hydrogen molecule, which amounts to 9-29% of the ideal adsorption energy required for hydrogen storage applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Carbon Capture in Novel Porous Liquids

Direct air capture (DAC) of CO 2 is one of the negative emission technologies under development to limit the impacts of climate change. The dilute concentration of CO 2 in the atmosphere (~400 ppm) requires new materials for carbon capture with increased CO 2 selectivity that is not met with current materials. Porous liquids (PLs) are an emerging material that consist of a combination of solvents and porous hosts creating a liquid with permanent porosity. PLs have demonstrated excellent CO 2 selectivity, but the features that control how and why PLs selectively capture CO 2 is unknown. To elucidate these mechanisms, density functional theory (DFT) simulations were used to investigate two different PLs. The first is a ZIF-8 porous host in a water/glycol/2-methylimidazole solvent. The second is the CC13 porous organic cage with multiple bulky solvents. DFT simulations identified that in both systems, CO 2 preferentially bound in the pore window rather than in the internal pore space, identifying that the solvent-porous host interface controls the CO 2 selectivity. Additionally, SNL synthesized ZIF-8 based PL compositions. Evaluation of the long-term stability of the PL identified no change in the ZIF-8 crystallinity after multiple agitation cycles, identifying its potential for use in carbon capture systems. Through this project, SNL has developed a fundamental understanding of solvent-host interactions, as well as how and where CO 2 binds in PLs. Through these results, future efforts will focus not on how CO 2 behaves inside the pore, but on the porous host-solvent interface as the driving force for PL stability and CO 2 selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The Importance of Avoided Crossings in Understanding High Valley Degeneracy in Half‐Heusler Thermoelectric Semiconductors

Abstract Half‐Heusler (hH) compounds are promising candidates for inexpensive, low‐toxicity thermoelectric materials. It is well known that engineering electronic bands with high valley degeneracy is an effective approach for enhancing the performance of thermoelectric materials, and there are several routes for achieving high valley degeneracy in hH systems. For instance, there are multiple locations in the first Brillouin zone where the valence band maximum can be found (at the Γ‐, L‐, or W‐point), and there are two competing low‐lying conduction bands at the X‐point, where the conduction band minimum is located. By converging the multiple valence band and conduction band extrema, the valley degeneracy, and hence, performance of these materials can be improved. Here, group theoretical and tight‐binding approaches, in addition to first‐principles density functional theory calculations, are used to study the chemical origins of various band extrema in both the n‐type and p‐type compounds, with particular focus on ZrNiSn and NbFeSb. Specifically, the importance of avoided crossings is explained. The results of this work can be used to better understand and develop design strategies for engineering better performing hH thermoelectrics.

Brod, Madison K.↗
DOE OSTI2024

Cryogenic Photoelectron Spectroscopic and Theoretical Study of the Electronic and Geometric Structures of Undercoordinated Osmium Chloride Anions OsCl n – ( n = 3–5)

A series of anionic transition metal halides OsCl n - (n=3–5) have been investigated using a newly developed, home-constructed, cryogenic anion cluster photoelectron spectroscopy. Here, the target anionic species are generated through collision-induced dissociation in a two-stage ion funnel. The measured vertical detachment energies (VDEs) are 3.48 eV, 4.54 eV, and 4.81 eV for n = 3, 4, and 5, respectively. Density functional theory calculations at the B3LYP-D3(BJ)//aug-cc-pVTZ (-pp) level predict the lowest energy structures of OsCl n - (n = 3–5) to be a quintet triangle, quartet square, and quintet square-based pyramid, respectively. The CCSD(T)-calculated VDEs and corresponding adiabatic detachment energies (ADEs) agree well with our experimental measurements. Analysis of the corresponding frontier molecular orbitals (FMOs) and charge density differences suggests that the d-orbitals of the transition metal Os play a primary role in the single-photon detachment processes, and the detached electrons originating from different molecular orbitals are distinguishable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Evaluation of Amorphous Oxide Coatings for High-Voltage Li-Ion Battery Applications Using a First-Principles Framework

Cathode surface coatings are widely used industrially as a means to suppress degradation and improve electrochemical performance of lithium-ion batteries. However, developing an optimal coating is challenging, as different coating materials may enhance one aspect of performance while hindering another. Furthermore, to elucidate the fundamental thermodynamic and transport properties of amorphous cathode coating materials, here, we present a framework for calculating and analyzing the Li + and O 2- transport and the stability against delithiation in such materials. Our framework includes systematic workflows of ab-initio molecular dynamics calculations to obtain amorphous structures and diffusion trajectories coupled with an analysis of critical changes of the active-ion local environment during diffusion. Based on these data, we provide an estimate of room-temperature diffusivities, including statistical error bars, and the evaluation of the coating suitability in terms of its ability to facilitate Li + transport while blocking O 2- transport. Finally, we add the thermodynamic stability analysis of the coating chemistry within the operating voltage of common Li-ion cathodes. We apply this framework to two commonly used amorphous coating materials, Al 2 O 3 and ZnO. We find that (1) in general, a higher Li + content increases both Li + and O 2- diffusivities in both Al 2 O 3 and ZnO. Also, Li + and O 2- diffuse much faster in ZnO than in Al 2 O 3 . (2) However, neither Al 2 O 3 nor ZnO is expected to retain a significant concentration of Li + at high charge. (3) ZnO performs much more poorly in terms of O 2- blocking, and hence, Al 2 O 3 is preferred for high-voltage cathode applications. These results will help to quantitatively evaluate amorphous materials, such as metal oxides and fluorides, for different performance metrics and facilitate the development of optimal cathode coatings.

25 ENERGY STORAGE↗
DOE OSTI2020

Fifth-degree elastic energy for predictive continuum stress–strain relations and elastic instabilities under large strain and complex loading in silicon

Materials under complex loading develop large strains and often phase transformation via an elastic instability, as observed in both simple and complex systems. Here, we represent a material (exemplified for Si I) under large Lagrangian strains within a continuum description by a 5th-order elastic energy found by minimizing error relative to density functional theory (DFT) results. The Cauchy stress—Lagrangian strain curves for arbitrary complex loadings are in excellent correspondence with DFT results, including the elastic instability driving the Si I → II phase transformation (PT) and the shear instabilities. PT conditions for Si I → II under action of cubic axial stresses are linear in Cauchy stresses in agreement with DFT predictions. Such continuum elastic energy permits study of elastic instabilities and orientational dependence leading to different PTs, slip, twinning, or fracture, providing a fundamental basis for continuum physics simulations of crystal behavior under extreme loading.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Reexamining the variational two-particle reduced density matrix for nuclear systems

We report that in most nuclear many-body methods, observables are calculated using many-body wave functions explicitly. The variational two-particle reduced density matrix method is one of the few exceptions to the rule. Ground-state energies of both closed-shell and open-shell nuclear systems can indeed be evaluated by minimizing a constrained linear functional of the two-particle reduced density matrix. However, it has virtually never been used in nuclear theory, because nuclear ground states were found to be well overbound, contrary to those of atoms and molecules. Consequently, we introduced new constraints in the nuclear variational two-particle reduced density matrix method, developed recently for atomic and molecular systems. Our calculations then show that this approach can provide a proper description of nuclear systems where only valence neutrons are included. For the nuclear systems where both neutrons and protons are active, however, the energies obtained with the variational two-particle reduced density matrix method are still overbound. The possible reasons for the noticed discrepancies and solutions to this problem will be discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗