Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “defect diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1959

Investigation on the use of a Freely Rotating Rotor at the Cowl Face of a Supersonic Conical Inlet to Reduce Inlet Flow Distortion

An investigation has been made on the use of a freely rotating rotor at the cowl face of a supersonic conical diffuser to determine its effectiveness in reducing inlet flow distortion and the penalty in terms of total-pressure loss imposed by such a device when distortions are negligible. Tests were made with a rotor having an inlet tip diameter of 2.18 inches and a ratio of hub radius to tip radius of 0.52, in conjunction with a conical inlet having a 25 deg semi-vertex cone angle, at a Mach number of 2.1 over an angle-of-attack range of 0 deg to 8 deg. A simplified analysis showing that a supersonic, freely rotating rotor with maximum solidity for noninterference between blades will operate in an undistorted flow with a total-pressure defect of 1 percent or less was experimentally verified. Overall total-pressure distortions of 0.1 to 0.4 and Mach number distortions of 0.4 to 1.4, obtained at 4 deg to 8 deg angle of attack, were reduced about 30 percent and 23 percent, respectively, because of the presence of the rotor, with no measurable total-pressure loss. The rotor increased the peak total-pressure recovery at the simulated combustion chamber 1 1/2 and 3 1/2 percent at 6 deg and 8 deg angles of attack, respectively. This increase is attributed to lower diffusion duct losses as a consequence of a more uniform flow created by the rotor.

Goldberg, Theodore J.↗
NASA NTRS2018

Solar Wind Implantation into Lunar Regolith II: Monte Carlo Simulations of Hydrogen Retention in a Surface with Defects and the Hydrogen (H, H2) Exosphere

Recently, the near-infrared observations of the OH veneer on the lunar surface by the Moon Mineralogy Mapper (M3) have been refined to constrain the OH content to 500-750 parts per million (ppm). The observations indicate diurnal variations in OH up to 200 ppm possibly linked to warmer surface temperatures at low latitude. We examine the M3 observations using a statistical mechanics approach to model the diffusion of implanted H in the lunar regolith. We present results from Monte Carlo simulations of the diffusion of implanted solar wind H atoms and the subsequently derived H and H2 exospheres.

Exosphere↗
DOE OSTI2024

Thermodynamic and Kinetic Modulation of Methylammonium Lead Bromide Crystallization Revealed by In Situ Monitoring

Hybrid organic–inorganic perovskite (HOIP) crystals are promising optoelectronic materials, but little is known about either the thermodynamic and kinetic controls on crystal growth or the underlying growth mechanism(s). Herein, we use fluid cell atomic force microscopy (AFM) and solution nuclear magnetic resonance (NMR) spectroscopy to investigate growth of the model HOIP crystal CH 3 NH 3 PbBr 3 (MAPbBr 3 ) and to determine how formic acid (HCOOH) modulates the thermodynamics and kinetics of growth. The results show that growth of MAPbBr 3 in dimethylformamide (DMF) proceeds through the classical pathway by the spreading of atomic crystal steps generated at screw dislocations on the {100} surface. Temperature dependent step velocity measurements demonstrate that with increasing concentration, HCOOH decreases both the solubility of MAPbBr 3 and the kinetic coefficient (b) of step movement. 1 H-NMR measurements indicate that HCOOH increases the lifetime of the methylammonium (MA + ) ions and promotes the association of MAPbBr 3 , thus tuning the solubility of the perovskite. HCOOH also alters the molecular tumbling motion and bulk diffusion of the MA + ions, possibly via H-bonding. Further, our findings establish a direct correlation between the mesoscale crystal growth kinetics and the molecular-scale interactions between organic additives and constituent ions, providing unprecedented insights for developing predictive syntheses of HOIP crystals with defined size, crystal habit and shape, and defect distribution.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Slot-die-coating operability windows for polymer electrolyte membrane fuel cell cathode catalyst layers

Roll-to-roll (R2R) slot-die coating of polymer electrolyte membrane fuel cell (PEMFC) catalyst layers represents a scalable deposition method for producing 10–20 m 2 ·min -1 of catalyst-coated gas diffusion layers (GDLs). This high-throughput production technique will help lower the cost of PEMFC catalyst layers. The uniformity of the wet layer applied by slot die deposition is affected by process parameters such as substrate speed, vacuum pressure applied at the upstream meniscus, gap between the slot die lips and substrate, ink rheology, and other ink and substrate properties. The set of conditions for producing a defect-free coating with a dilute ink typically requires little to no upstream vacuum pressure, so suitable operating conditions can be found easily through trial and error and operator intuition. However, the higher viscosity of more concentrated inks dramatically shifts the range of settings that result in a homogeneous coating to higher vacuum levels, which are harder to find through hit or miss. A predictive model showing the range of operable conditions decreases material wastage inherent in experimentally searching for suitable parameters. In this study, the defect-free coating parameter window is explored experimentally and theoretically for two concentrations of PEFC cathode inks. Both a full capillary hydrodynamic model and a computationally cheaper viscocapillary model successfully predict the experimentally determined coating window within the experimental and model uncertainty limits for inks with 5.3 wt% and 12.0 wt% solids ink while maintaining the 0.1 mg Pt ·cm -2 Pt areal loading target. Here, this paper demonstrates a viable pathway for meeting the $30/kW net ultimate cost target of the United States Department of Energy (U.S. DOE) Hydrogen Fuel Cells Technologies Office (HFTO). The concentrated ink lowers the thermal energy and capital expenditure (CapEx) budget of the coating process by decreasing the amount of time, energy, and floorspace required for drying the coating.

25 ENERGY STORAGE↗
DOE OSTI2024

Turning Normal to Abnormal: Reversing CO 2 /C2–Hydrocarbon Selectivity in HKUST–1

Metal–organic frameworks (MOFs) can efficiently purify hydrocarbons from CO 2 , but their rapid saturation, driven by preferential hydrocarbon adsorption, requires energy-intensive adsorption–desorption processes. To address these challenges, an innovative approach is developed, enabling control over MOF flexibility through densification and defect engineering, resulting in an intriguing inverse CO 2 /C2 hydrocarbon selectivity. Here, in this study, the densification process induces the shearing of the crystal lattice and contraction of pores in a defective CuBTC MOF. These changes have led to a remarkable transformation in selectivity, where the originally hydrocarbon-selective CuBTC MOF becomes CO 2 -selective. The selectivity values for densified CuBTC are significantly reversed when compared to its powder form, with notable improvements observed in CO 2 /C 2 H 6 (4416 vs 0.61), CO 2 /C 2 H 4 (15 vs 0.28), and CO 2 /C 2 H 2 (4 vs 0.2). The densified material shows impressive separation, regeneration, and recyclability during dynamic breakthrough experiments with complex quinary gas mixtures. Simulation studies indicate faster CO 2 passage through the tetragonal structure of densified CuBTC compared to C 2 H 2 . Experimental kinetic diffusion studies confirm accelerated CO 2 diffusion over hydrocarbons in the densified MOF, attributed to its small pore window and minimal interparticle voids. This research introduces a promising strategy for refining existing and future MOF materials, enhancing their separation performance.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Interfacial Unit-Dependent Catalytic Activity for CO Oxidation over Cerium Oxysulfate Cluster Assemblies

Atomically precise cerium oxo clusters offer a platform to investigate structure–property relationships that are much more complex in the ill-defined bulk material cerium dioxide. We investigated the activity of the MCe 70 torus family (M = Cd, Ce, Co, Cu, Fe, Ni, and Zn), a family of discrete oxysulfate-based Ce 70 rings linked by monomeric cation units, for CO oxidation. CuCe 70 emerged as the best performing MCe 70 catalyst among those tested, prompting our exploration of the role of the interfacial unit on catalytic activity. Temperature-programmed reduction (TPR) studies of the catalysts indicated a lower temperature reduction in CuCe 70 as compared to CeCe 70 . In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) indicated that CuCe 70 exhibited a faster formation of Ce 3+ and contained CO bridging sites absent in CeCe 70 . Isothermal CO adsorption measurements demonstrated a greater uptake of CO by CuCe 70 as compared to CeCe 70 . The calculated energies for the formation of a single oxygen defect in the structure significantly decreased with the presence of Cu at the linkage site as opposed to Ce. Furthermore, this study revealed that atomic-level changes in the interfacial unit can change the reducibility, CO binding/uptake, and oxygen vacancy defect formation energetics in the MCe 70 family to thus tune their catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Disorder recovers the Wiedemann-Franz law in the metallic phase of VO 2

At temperatures higher than 341 K, vanadium dioxide (VO 2 ) is a strongly correlated metal with resistivity exceeding the Mott-Ioffe-Regel limit. Its electronic thermal conductivity is lower than that predicted by the Wiedemann-Franz (WF) law, and can be explained by nonquasiparticle transport where heat and charge currents follow separate diffusive modes. In contradiction, the Wiedemann-Franz law is a direct consequence of quasiparticle transport where charge carriers are elastically scattered. In this work, we enhance elastic electron scattering in VO 2 by introducing atomic disorder with ion irradiation. Furthermore, a gradual and eventually full recovery of the WF law is observed at high defect densities. This observation provides an example that connects hydrodynamic quasiparticle transport to nonquasiparticle transport in metallic systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1990

Effect of neutron irradiation on the thermoelectric properties of SiGe alloys

Zone-leveled and hot-pressed n- and p-type Si80Ge20 alloys were irradiated with neutrons to a fluence of 4 x 1018 n/sq cm and to a fluence of 5.4 x 1019 n/sq cm at a temperature of approximately 200-300 C. The effect of neutron irradiation on the thermoelectric properties of these alloys was evaluated. The carrier concentration and mobility (and hence the resistivity) were measured at room temperature while the thermal diffusivity was measured at 177-192 C both before and after the irradiation and after each subsequent 2-h heat treatment at 350 C, 600, and 1000 C. The irradiation increased the resistivity significantly, but the thermal conductivity decreased only by about 10-15 percent. This tends to indicate that the radiation produced only small defects (single pairs and small vacancy chains). The samples all returned to almost exactly their preirradiation state after the 1000 C anneal. This indicates that SiGe alloys can be operated in this neutron fluence at high temperatures without a degradation of thermoelectric properties.

Vandersande, Jan W.↗
NASA NTRS1997

Bulk Growth of Wide Band Gap II-VI Compound Semiconductors by Physical Vapor Transport

The mechanism of physical vapor transport of II-VI semiconducting compounds was studied both theoretically, using a one-dimensional diffusion model, as well as experimentally. It was found that the vapor phase stoichiometry is critical in determining the vapor transport rate. The experimental heat treatment methods to control the vapor composition over the starting materials were investigated and the effectiveness of the heat treatments was confirmed by partial pressure measurements using an optical absorption technique. The effect of residual (foreign) gas on the transport rate was also studies theoretically by the diffusion model and confirmed experimentally by the measurements of total pressure and compositions of the residual gas. An in-situ dynamic technique for the transport rate measurements and a further extension of the technique that simultaneously measured the partial pressures and transport rates were performed and, for the first time, the experimentally determined mass fluxes were compared with those calculated, without any adjustable parameters, from the diffusion model. Using the information obtained from the experimental transport rate measurements as guideline high quality bulk crystal of wide band gap II-VI semiconductor were grown from the source materials which undergone the same heat treatment methods. The grown crystals were then extensively characterized with emphasis on the analysis of the crystalline structural defects.

Su, Ching-Hua↗
NASA NTRS1997

Bulk Growth of Wide Band Gap II-VI Compound Semiconductors by Physical Vapor Transport

The mechanism of physical vapor transport of II-VI semiconducting compounds was studied both theoretically, using a one-dimensional diffusion model, as well as experimentally. It was found that the vapor phase stoichiometry is critical in determining the vapor transport rate. The experimental heat treatment methods to control the vapor composition over the starting materials were investigated and the effectiveness of the heat treatments was confirmed by partial pressure measurements using an optical absorption technique. The effect of residual (foreign) gas on the transport rate was also studies theoretically by the diffusion model and confirmed experimentally by the measurements of total pressure and compositions of the residual gas. An in-situ dynamic technique for the transport rate measurements and a further extension of the technique that simultaneously measured the partial pressures and transport rates were performed and, for the first time, the experimentally determined mass fluxes were compared with those calculated, without any adjustable parameters, from the diffusion model. Using the information obtained from the experimental transport rate measurements as guideline high quality bulk crystal of wide band gap II-VI semiconductor were grown from the source materials which undergone the same heat treatment methods. The grown crystals were then extensively characterized with emphasis on the analysis of the crystalline structural defects.

Su, Ching-Hua↗
NASA NTRS2005

Length dependence of carbon nanotube thermal conductivity and the "problem of long waves"

We present the first calculations of finite length carbon nanotube thermal conductivity that extend from the ballistic to the diffusive regime, throughout a very wide range of lengths and temperatures. The long standing problem of vanishing scattering of the "long wavelength phonf dramatically here, making the thermal conductivity diverge as the nanotube length increases. We show that the divergence disappears if 3-phonon scattering processes are considered to second or higher order. Nevertheless, for defect free nanotubes, the thermal conductivity keeps increasing up to very large lengths (10 gm at 300 K). Defects in the nanotube are also able to remove the long wavelength divergence.

Evaluation Studies↗
NASA NTRS2012

Metasomatic Control of Water in Garnet and Pyroxene from Kaapvaal Craton Mantle Xenoliths

Fourier transform infrared spectrometry (FTIR) and laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) were used to determine water, rare earth (REE), lithophile (LILE), and high field strength (HFSE) element contents in garnet and pyroxene from mantle xenoliths, Kaapvaal craton, southern Africa. Water enters these nominally anhydrous minerals as protons bonded to structural oxygen in lattice defects. Pyroxene water contents (150-400 ppm in clinopyroxene; 40-250 ppm in orthopyroxene) correlate with their Al, Fe, Ca and Na and are homogeneous within a mineral grains and a xenolith. Garnets from Jagersfontein are chemically zoned for Cr, Ca, Ti and water contents. Garnets contain 0 to 20 ppm H2 Despite the fast diffusion rate of H in mantle m inerals, the observations above indicate that the water contents of mantle xenolith minerals were not disturbed during kimberlite entrainment and that the measured water data represent mantle values. Trace elements in all minerals show various degrees of light REE and LILE enrichments indicative of minimal to strong metasomatism. Water contents of peridotite minerals from the Kaapvaal lithosphere are not related to the degree of depletion of the peridotites. Instead, metasomatism exerts a clear control on the amount of water of mantle minerals. Xenoliths from each location record specific types of metasomatism with different outcomes for the water contents of mantle minerals. At pressures . 5.5 GPa, highly alkaline melts metasomatized Liqhobong and Kimberley peridotites, and increased the water contents of their olivine, pyroxenes and garnet. At higher pressures, the circulation of ultramafic melts reacting with peridotite resulted in co-variation of Ca, Ti and water at the edge of garnets at Jagersfontein, overall decreasing their water content, and lowered the water content of olivines at Finsch Mine. The calculated water content of these melts varies depending on whether the water content of the peridotite (2 wt% HO. 2O) or individual m inerals (<0.5-13 wt% H2O) are used, and also depend on the mineral-melt water partition coefficients. These metasomatic events are thought to have occurred during the Archean and Proterozoic, meaning that the water contents measured here have been preserved since that time and can be used to investigate viscocity and longevity of cratonic mantle roots.

Peslier, Anne H.↗
DOE OSTI2022

Tuning the Placement of Pt “Single Atoms” on a Mixed CeO 2 –TiO 2 Support

Defect sites on the oxide supports can be used to anchor and activate "single-atoms" catalysts (SACs). By engineering the anchoring sites for supporting SACs, one can alter their electronic and atomic structures which, in turn, define their activity, selectivity, and stability for catalytic reactions. To create and tune unique sites for Pt SACs on CeO 2 support, in this work, we synthesized a system consisting of CeO 2 decorated on TiO 2 nano-oxides for supporting the Pt SACs and investigated the effect of Pt weight loading. Here, a combination of multiple structural characterization methods including diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) were employed to characterize the distribution of charge states of single atoms and evaluate the heterogeneity of their binding sites. We have found that the placement of Pt atoms can be tuned on a mixed oxide surface by changing the weight loading of Pt.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Contrasting SnTe–NaSbTe 2 and SnTe–NaBiTe 2 Thermoelectric Alloys: High Performance Facilitated by Increased Cation Vacancies and Lattice Softening

Defect chemistry is critical to designing high performance thermoelectric materials. In SnTe, the naturally large density of cation vacancies results in excessive hole doping and frustrates the ability to control the thermoelectric properties. Yet, recent work also associates the vacancies with suppressed sound velocities and low lattice thermal conductivity, underscoring the need to understand the interplay between alloying, vacancies, and the transport properties of SnTe. Here, we report solid solutions of SnTe with NaSbTe 2 and NaBiTe 2 (NaSn m SbTe m +2 and NaSn m BiTe m +2 , respectively) and focus on the impact of the ternary alloys on the cation vacancies and thermoelectric properties. We find introduction of NaSbTe 2 , but not NaBiTe 2 , into SnTe nearly doubles the natural concentration of Sn vacancies. Furthermore, DFT calculations suggest that both NaSbTe 2 and NaBiTe 2 facilitate valence band convergence and simultaneously narrow the band gap. These effects improve the power factors but also make the alloys more prone to detrimental bipolar diffusion. Indeed, the performance of NaSn m BiTe m +2 is limited by strong bipolar transport and only exhibits modest maximum ZTs ≈ 0.85 at 900 K. In NaSn m SbTe m +2 however, the doubled vacancy concentration raises the charge carrier density and suppresses bipolar diffusion, resulting in superior power factors than those of the Bi-containing analogues. Lastly, NaSbTe 2 incorporation lowers the sound velocity of SnTe to give glasslike lattice thermal conductivities. Facilitated by the favorable impacts of band convergence, vacancy-augmented hole concentration, and lattice softening, NaSn m SbTe m +2 reaches high ZT ≈ 1.2 at 800–900 K and a competitive average ZT avg of 0.7 over 300–873 K. The difference in ZT between two chemically similar compounds underscores the importance of intrinsic defects in engineering high-performance thermoelectrics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Unveiling the interaction of nanopatterned void superlattices with irradiation cascades

Nanopatterned microstructures in materials can have a profound impact on materials’ physical and chemical properties. While voids are typically considered as detrimental defects in irradiated materials, the patterning of nanoscale voids causes the formation of void superlattices and provides a highly efficient mechanism for gas storage. Despite the important applications of nanopatterned defect superlattices, how they degrade under irradiation remains unclear. Here we provide direct observation of the evolution of void superlattices under irradiation and elucidate the interaction of void superlattices with irradiation cascades. We reveal that the instability of void superlattices under irradiation is caused by heterogenous void shrinkage and demonstrate the imperative role of mixed 1D/3D diffusion of self-interstitial atoms and injected inert gas atoms on void shrinkage and void superlattice instability. Understanding the degradation mechanisms of nanopatterned microstructures is essential to designing damage-tolerant materials and broadening their applications in extreme environments.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Anatase TiO 2 Surface Hydration: Infrared Vibrational Assignment and Facet-Specific Stability

Anatase TiO 2 nanoparticles support a subtle diversity of surface aqua and hydroxy coordination environments that are characteristic of distinct facets and defect sites. The disparate properties and stability of each molecularly or dissociatively absorbed water environment may provide unique reactivity for facet- and site-selective atomic layer deposition (ALD). Here we probe the temperature-dependent and facet-specific stretching frequency and stability of surface hydroxyls on faceted anatase TiO 2 nanoparticles via in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Well-defined truncated octahedra, disks, and rods fabricated through hydrothermal synthesis present dominant (101), (001), and (010) facets, respectively. The selective dehydration of discrete local coordination environments as a function of temperature provides a potential pathway to site-selective and facet-selective ALD on metal oxide nanomaterials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1972

Improving the efficiency of GaP LED's which emit green light

A study of techniques for preparing n-type material and junctions which yield the most consistent high diode efficiency values high lighted the role that Ga vacancies and/or associated defects play in reducing the green luminescent efficiency of n-type GaP. A useful method for obtaining good quality material was developed. It is shown that junction formation at high temperatures in a process where the n to p transition occurs without removing the substrate from the furnace yields devices superior to those obtained by diffusion or double epitaxy in the conventional manner previously used for GaP junction formation.

Ladany, I.↗
DOE OSTI2022

The effect of elastic anisotropy on the symmetry selection of irradiation-induced void superlattices in cubic metals

We report self-organized microstructures and patterns have been widely observed in non-equilibrium physical systems. In particular, irradiation in metals creates far-from-equilibrium environments, in which the competing dynamics of defect production and annihilation can lead to unique self-organized superlattice structures, e.g., void and gas bubble superlattices. From a physical point of view, the superlattice structures are dictated by the intrinsic symmetry breaking in the metals, i.e., anisotropy caused by the breaking of continuous rotational symmetry. In the literature, two distinctive anisotropies, elastic anisotropy and diffusion anisotropy of interstitials, have been proposed to be the origins of superlattice formation. However, it is still unclear which anisotropy dominates the symmetry selection of superlattice structures. In this paper, we study elastic anisotropy and its effect on the symmetry of void superlattices. By using theoretical analyses and phase field simulations, we show that elastic anisotropy in cubic metals can lead to either face-centered cubic or simple cubic superlattices depending on the Zener anisotropy ratio. The superlattices formed under this elastic anisotropy mechanism must form under the influence of spinodal decomposition, as the mechanism requires perturbations in the vacancy concentration field to develop into spatially-static concentration waves. We compare to existing work on symmetry selection in superlattices via diffusion anisotropy and to experimental observations, and we suggest that concentration wave development under the influence of elastic anisotropy is not the mechanism for symmetry selection during the formation of irradiation-induced void superlattices, but that diffusion anisotropy could be the dominant mechanism.

36 MATERIALS SCIENCE↗