Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cumulative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Capacitor bonding techniques and reliability

The effect of thermal cycling on the mechanical failure of bonded ceramic chip capacitors mounted on alumina substrates is studied. It is shown that differential thermal expansion is responsible for the cumulative effects which lead to delayed failure of the capacitors. Harder or higher melting solders are found to be less susceptible to thermal cycling effects, although they are more likely to fail during initial processing operations.

Kinser, D. L.↗

Mare basalts from the Taurus-Littrow region of the moon

Two distinct chemical basalt types have been sampled at the Apollo 17 landing site. Very high-titanium basalts (about 13 wt % TiO2) are the dominant type and display a textural range from olivine-porphyritic, ilmenite vitrophyres to plagioclase-poikilitic, ilmenite microgabbros. Most of these rocks could have come from one flow. These basalts appear to represent partial melts from feldspar-ilmenite cumulates with an Ar-40/Ar-39 age of about 3.7 G.y., which have experienced little, if any, near-surface fractionation of olivine and Fe-Mg-Ti oxides. A second type of basalt virtually identical to the Apollo 11 (low-K) basalts is much less common.

Papike, J. J.↗

Origin of Apollo 17 rocks and soils

Lithophile trace element abundances have been determined by mass spectrometric isotope dilution for a suite of Apollo 17 samples. The six mare basalts have generally similar relative trace element abundances; they are also similar to Apollo 11 trace element poor basalts. It is suggested that these basalts were derived by partial fusion of cumulates. The Apollo 17 highland breccias show an order of magnitude range in trace element abundances although there is a clustering of KREEP-rich samples which are interpreted as mixtures. The Apollo 17 soils show only a limited range of trace element abundances. They are mixtures of highland breccias, mare basalts, and orange-black 'soil'. There appear to be two groups of soils, Light Mantle and the rest. Both groups seem to have the same basalt component, which is similar to Station 4 basalt from Shorty Crater and probably is the uppermost basalt unit throughout the Taurus-Littrow valley.

Philpotts, J. A.↗

Horizontal transport of the regolith, modification of features, and erosion rates on the lunar surface

Impact-ejecta systematics are developed for the smaller cratering events which, with cumulative crater populations observed in young mare regions and on Copernicus ejecta fields, yield rates and a range distribution for the horizontal transport of material by impact processes. The deposition rate for material originating more than 1 m away is found to be about 8 mm per million years. Material from 10 km away accumulates at a rate of about 0.08 mm per million years, providing a steady influx of foreign material. From the degradation of boulder tracks, a rate of 5 plus or minus 3 cm per million years is computed for the filling of shallow lunar depressions on slopes. Mass wastage and downslope movement of bedrock outcroppings on Hadley Rille seem to be proceeding at a rate of about 8 mm per million years. The Camelot profile is suggestive of a secondary impact feature.

Arvidson, R.↗

Influence of probe contamination on recombination of atomic hydrogen

Atomic hydrogen concentration profiles were measured through a screen-stabilized one-dimensional propane/oxygen front using a specially modified electron spin resonance (ESR) spectrometer. The ESR line occurring at 3075.5 G at 9261.2 MHz was monitored in the presence and absence of various halogenated hydrocarbons. A significant cumulative decrease in peak intensity occurred with addition of any halogenated compound. Further results suggest that the effect is due to inhibitor action on the transport tube walls followed by changes in atomic hydrogen interaction with the walls, and that hydrogen decay is nonlinear in the halogenated tube.

Collins, L. W.↗

Hydrogen Energy: A bibliography with abstracts

Bibliographic series cites documents relating to use of hydrogen as energy carrier. In addition to cumulative volume, annual supplement is available for 1974, and quarterly update program serves 1975 and current calendar year.

Source record↗

Size distribution of fragment debris produced by simulated meteoroid impact of spacecraft wall

A laboratory experimental program was conducted to determine the amount of fragment debris produced and its size distribution when simulated spacecraft walls are penetrated by hypervelocity projectiles. Two tests were made in which a spacecraft wall was struck with a small steel and an aluminum projectile, respectively. Results show that most of the fragment debris were irregularly shaped flat plates. The fragment data follow a cumulative number distribution law of the form N = am(exp b) where m is fragment mass and a and b are constants. Orbital lifetimes of most of the fragments were very short, being on the order of a few days.

T Dale Bess↗

Development of a high-resolution automatic digital (urine/electrolytes) flow volume and rate measurement system of miniature size

To aid in the quantitative analysis of man's physiological rhythms, a flowmeter to measure circadian patterns of electrolyte excretion during various environmental stresses was developed. One initial flowmeter was designed and fabricated, the sensor of which is the approximate size of a wristwatch. The detector section includes a special type of dielectric integrating type sensor which automatically controls, activates, and deactivates the flow sensor data output by determining the presence or absence of fluid flow in the system, including operation under zero-G conditions. The detector also provides qualitative data on the composition of the fluid. A compact electronic system was developed to indicate flow rate as well as total volume per release or the cumulative volume of several releases in digital/analog forms suitable for readout or telemetry. A suitable data readout instrument is also provided. Calibration and statistical analyses of the performance functions required of the flowmeter were also conducted.

Liu, F. F.↗

Human health effects of ozone reduction

Modification of the stratosphere, such as a reduction in its equilibrium ozone content, could produce direct and indirect effects on human health. The direct hazard to humans would be caused by an increase in the cumulative amount of UV radiation reaching the earth's surface in the range of 285 to 340 nm, encompassing the UV-B or erythemal wavelength region of 280 to 320 nm. Exposing the susceptible human population to an increased total UV dosage of shorter wavelengths could increase skin cancer incidence. Although effects would be delayed by decades, for each 1% decrease in ozone the expected increase in skin cancer incidence would be on the order of 2%.

Source record↗

Pulse height response of an optical particle counter to monodisperse aerosols

The pulse height response of a right angle scattering optical particle counter has been investigated using monodisperse aerosols of polystyrene latex spheres, di-octyl phthalate and methylene blue. The results confirm previous measurements for the variation of mean pulse height as a function of particle diameter and show good agreement with the relative response predicted by Mie scattering theory. Measured cumulative pulse height distributions were found to fit reasonably well to a log normal distribution with a minimum geometric standard deviation of about 1.4 for particle diameters greater than about 2 micrometers. The geometric standard deviation was found to increase significantly with decreasing particle diameter.

Wilmoth, R. G.↗

Specialized physiological studies in support of manned space flight

Subjects were tested for tolerance to lower body negative pressure (LBNP) before and after acute dehydration by working intermittenly for two hours without fluid replacement. On the second day there-after the LBNP tests were repeated before and after acute dehydration. The LBNP test consisted of 5 min long consective stages at -20, -30, -40, -50 and -60 Torr. Tests were terminated when syncope was imminent or the full sequence was completed. Tolerance was expressed in terms of cumulative stress in Torr x min. Measurements of body mass, density, fat fraction and total body water (TBW) were made before and after acclimation. Blood volume and its constituents were determined before and after each of the four LBNP tests. During LBNP, heart rate, blood pressure, and changes in calf and forearm volume were recorded every minute. Results showed: acute dehydration caused a significant loss in average LBNP tolerance on all subjects. Acclimation to heat did not significantly affect LBNP tolerance in hydrated subjects but significantly improved it on dehydrated subjects.

Luft, U. C.↗

The requirements for batteries for electric vehicles

Analysis of automobile use patterns shows that the battery requirements for an urban car can be met by mid-term battery technology. The far-term technology potentially offers greater range but does not proportionately increase the usefulness of the vehicle. This suggests that emphasis should be shifted toward more modest energy density goals, if such a shift would ease technical problems and allow the use of lower cost materials and construction methods. A technology diffusion model indicates that the impact of the mid-term batteries by the year 2000 would be greater than that of the far-term batteries because of their earlier introduction and nearly equal market potential. From the standpoint of maximizing both the cumulative impact and the benefits derived in the year 2000, however, a strategy of early introduction of near-term and mid-term cars followed by the far-term vehicle would produce the optimum results.

Schwartz, H. J.↗

The levels of edit

The editorial process is analyzed, and five levels of edit are identified. These levels represent cumulative combinations of nine types of edit: (1) coordination, (2) policy, (3) integrity, (4) screening, (5) copy clarification, (6) Mechanical Style, (7) Language, and (9) substantive. The levels and types of edit, although developed for specific use with external reports at the Jet Propulsion Laboratory, cover the general range of technical editing, especially as it applies to an in-house technical publications organization. Each type of edit is set forth in terms of groups of actions to be performed by the editor. The edit-level concept has enhanced understanding and communication among editors, authors, and publications managers concerning the specific editorial work to be done on each manuscript. It has also proved useful as a management tool for estimating and monitoring cost.

Vanburen, R.↗

Investigation of thermal fatigue in fiber composite materials

Graphite-epoxy laminates were thermally cycled to determine the effects of thermal cycles on tensile properties and thermal expansion coefficients of the laminates. Three 12-ply laminate configurations were subjected to up to 5,000 thermal cycles. The cumulative effect of the thermal cycles was determined by destructive inspection (electron micrographs and tensile tests) of samples after progressively larger numbers of cycles. After thermal cycling, the materials' tensile strengths, moduli, and thermal expansion coefficients were significantly lower than for the materials as fabricated. Most of the degradation of properties occurred after only a few cycles. The property degradation was attributed primarily to the progressive development of matrix cracks whose locations depended upon the layup orientation of the laminate.

Fahmy, A. A.↗

Petrographic and petrological study of lunar rock materials

Samples returned from Apollo 14 (14171, 14305, 14319), Apollo 15 (15255), Apollo 16 (61175, 67455), and Apollo 17 (77215) were studied optically and selected polished sections by SEM/Microprobe. Splits and separates from 77215, 67455, 61175 and 15255 were prepared; 77215 and 67455 were analyzed for major, minor and LIL trace elements. The data indicate that 77215, a noritic breccia clast found in the Station7 boulder, is a norite cumulate similar to and probably derived from the same body as 78235. The Apollo 17 boulders are found to be part of the same melt sheet, which was formed by a major impact event, possibly Serenitatis, about 4 B. Y. ago. The Apollo 14 and 16 breccias are polymict, their clast populations indicating quite different provenance. The Apollo 14 breccias are possibly the result of multiple impacts, while the other breccias studied appear to have been formed by single impacts. ANT suite clasts included in 61175 are, for the most part, granulites resulting from subsolidus recrystallization of norites, anorthosites or gabbros. This metamorphism appears to have occurred prior to the impact event forming 61175.

Winzer, S. R.↗

Size-morphology relations of lunar craters - Discussion

Morphologic as well as morphometric changes occur in the character of fresh lunar craters at a diameter range of about 10-20 km. The continuous size/morphology sequence advocated by Smith and Sanchez (1973) is sustained by their data only for craters between 10-20 km and about 100 km in diameter. The cumulative-morphology index, and the frequency-of-occurrence of wall terraces, central peaks, flat floors, and 'swirl texture' (Smith and Sanchez, 1973) support the existence of a morphologic transition at a crater diameter of 10-20 km, rather than a continuous gradation in shape within craters between 4 and 150 km in diameter.

Pike, R. J.↗

Interactions of CH4 and CO in the earth's atmosphere

Global distributions, sources, and sinks of methane and carbon monoxide in upper and lower levels of the earth's atmosphere, and the global budgets of methane and carbon monoxide, are studied, with emphasis on cumulative pollution. Stratospheric contents, vertical profiles of concentrations, simulation of vertical transport through the atmosphere, and latitudinal distributions are examined. Diffuse and localized (urban) concentrations of CO as pollutant are studied, and anthropogenic sources and sinks for CH4 and CO are considered. Perturbation of the CH4-CO-CO2 cycle, crucial to self-cleansing mechanisms of the troposphere, by anthropogenic CO emissions, and the effect of CO long life as global pollutant, are investigated.

Wofsy, S. C.↗