Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conversion efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

High‐Performance Green Thick‐Film Ternary Organic Solar Cells Enabled by Crystallinity Regulation

Abstract The power conversion efficiency (PCE) of organic solar cells (OSCs) has reached high values of over 19%. However, most of the high‐efficiency OSCs are fabricated by spin‐coating with toxic solvents and the optimal photoactive layer thickness is limited to 100 nm, limiting practical development of OSCs. It is a great challenge to obtain ideal morphology for high‐efficiency thick‐film OSCs when using non‐halogenated solvents due to the unfavorable film formation kinetics. Herein, high‐efficiency ternary thick‐film (300 nm) OSCs with PCE of 15.4% based on PM6:BTR‐Cl:CH1007 are fabricated by hot slot‐die coating using non‐halogenated solvent (o‐xylene) in the air. Compared to PM6:BTR‐Cl:Y6 blends, the stronger pre‐aggregation of CH1007 in solution induces the earlier aggregation of CH1007 molecules and longer aggregation time, and thus results in high and balanced crystallinity of donors and acceptor in CH1007‐based ternary film, which led to high‐carrier mobility and suppressed charge recombination. The ternary strategy is further used to fabricate high‐efficiency, thick‐film, large‐area, and flexible devices processed from non‐halogenated solvents, paving the way for industrial development of OSCs.

Chemistry↗
DOE OSTI2023

Interfacial Connections between Organic Perovskite/n + Silicon/Catalyst that Allow Integration of Solar Cell and Catalyst for Hydrogen Evolution from Water

Abstract The rapidly increasing solar conversion efficiency (PCE) of hybrid organic–inorganic perovskite (HOIP) thin‐film semiconductors has triggered interest in their use for direct solar‐driven water splitting to produce hydrogen. However, application of these low‐cost, electronic‐structure‐tunable HOIP tandem photoabsorbers has been hindered by the instability of the photovoltaic‐catalyst‐electrolyte (PV+E) interfaces. Here, photolytic water splitting is demonstrated using an integrated configuration consisting of an HOIP/n + silicon single junction photoabsorber and a platinum (Pt) thin film catalyst. An extended electrochemical (EC) lifetime in alkaline media is achieved using titanium nitride on both sides of the Si support to eliminate formation of insulating silicon oxide, and as an effective diffusion barrier to allow high‐temperature annealing of the catalyst/TiO 2 ‐protected‐n + silicon interface necessary to retard electrolytic corrosion. Halide composition is examined in the (FA 1‐x Cs x )PbI 3 system with a bandgap suitable for tandem operation. A fill factor of 72.5% is achieved using a Spiro‐OMeTAD‐hole‐transport‐layer (HTL)‐based HOIP/n + Si solar cell, and a high photocurrent density of −15.9 mA cm −2 (at 0 V vs reversible hydrogen electrode) is attained for the HOIP/n + Si/Pt photocathode in 1 m NaOH under simulated 1‐sun illumination. While this thin‐film design creates stable interfaces, the intrinsic photo‐ and electro‐degradation of the HOIP photoabsorber remains the main obstacle for future HOIP/Si tandem PEC devices.

08 HYDROGEN↗
DOE OSTI2023

Solid Solvation Assisted Electrical Doping Conserves High‐Performance in 500 nm Active Layer Organic Solar Cells

Abstract Organic solar cells (OSCs) process fascinating solution‐printing capability to achieve low‐cost and large‐scale manufacture. However, the rapid power conversion efficiency (PCE) decay with active layer thickness enlargement inhibits the implement of OSCs’ potential advantages. To overcome the bottlenecks of PCE decay in thick active layer OSCs, the electrical doping with componential selectivity in bulk heterojunction (BHJ) film is achieved by introducing a solid solvation additive. Benefiting from the higher exciton splitting efficiency together with the longer drift (L dr ) and diffusion (L diff ) lengths, an OSC with 100 nm BHJ film demonstrates a PCE increment from 16.44% to 18.24% with prolonged dark and illuminated storage stabilities. Applying the solid solvation assisted (SSA) doping method in the OSCs with 500 nm active layer, the PCE significantly increases by 31.9%, from the original value of 11.79% to 15.55%. It further improves to 15.84% in a ternary blend thick‐film device, which is the record value to the best of our knowledge. Besides, the SSA doping narrows the PCE gap between the 0.04 and 1 cm 2 devices. All improvements demonstrate the great potential of SSA doping for OSC commercial manufacture, since it optimizes the photovoltaic performance under all practical conditions of long‐term, thick‐film, and large‐area.

Chemistry↗
DOE OSTI2024

Amide-Engineered Metal–Organic Porous Liquids Toward Enhanced CO 2 Photoreduction Performance

The development of alternative catalytic systems toward high-performance CO 2 photoreduction is considered to be a promising approach to address the future energy demand and reduce the CO 2 emissions. However, CO 2 molecules are thermodynamically stable in nature, and thus the adsorption and activation of CO 2 on the surface of catalysts are the key factors to determine the conversion efficiency. Herein, a porous liquid (NH 2 -UIO-66 PL) is demonstrated for efficiently facilitating the adsorption and activation of CO 2 by modification of metal–organic framework (NH 2 -UIO-66) with ionic liquid via amide bonds. CdS/NH 2 -UIO-66 PL exhibits high-performance CO 2 -to-CO photoreduction with CO yield of 71.37 µmol g -1 h -1 and selectivity of 100%. Experiments and theoretical calculations show that the introduced amide moieties not only enriched the electron density at Zr 4+ active sites but also stabilize *COOH intermediate. In conclusion, the achievements provide an effective strategy for the development of metal–organic frameworks for energy catalysis.

*COOH reaction pathway↗
DOE OSTI2024

Design Principles of Diketopyrrolopyrrole‐Thienopyrrolodione Acceptor 1 –Acceptor 2 Copolymers

Abstract The design principles of acceptor 1 –acceptor 2 copolymers featuring alternating diketopyrrolopyrrole (DPP) and thienopyrrolodione (TPD) moieties are investigated. The investigated series of polymers is obtained by varying the aromatic linker between the two acceptor motifs between thiophene, thiazole, pyridine, and benzene. High electron affinities between 3.96 and 4.42 eV, facilitated by the synergy of the acceptor motifs are determined with optical gaps between 1.37 and 2.02 eV. Grazing incidence wide‐angle X‐ray scattering studies reveal a range of film morphologies after thermal annealing, including face‐on, end‐on and superstructure edge‐on‐like crystallites. Conversely, all materials form thin edge‐on layers on the polymer–air interface, as demonstrated by multi‐elemental near‐edge X‐ray absorption fine‐structure spectroscopy. The benefit of the electron‐deficient linkers thiazole and pyridine is evident: In organic field effect transistors, electron mobilities of up to 4.6 × 10 −2 cm 2 V −1 s −1 are obtained with outstanding on/off current ratios of 5 × 10 5 , facilitated by the absence of detectable hole transport in these materials. Viability for all‐polymer solar cells is assessed in active layer blends with the donor polymer PM6, yielding a maximum average power conversion efficiency of 4.8% and an open circuit voltage above 1 V.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Impact of Linker Engineering in Core‐Linked Dimeric Acceptors for High‐Performance Organic Solar Cells

Abstract The dimerization of small molecule acceptors (SMAs) is a promising strategy for enhancing the long‐term stability and power conversion efficiency (PCE) of organic solar cells (OSCs). However, the reported DSMAs are primarily limited to end‐linked molecular configurations, highlighting the need for further exploration of various dimer architectures. Herein, the development of two distinct core‐linked dimerized SMAs (DYF‐V and DYF‐E) are reported with tailored linker structures (vinylene and ethynyl, respectively), achieving high‐performance OSCs (PCE = 18.53%). Interestingly, a subtle change in the linker structures results in markedly different molecular properties and photovoltaic performances of the dimer acceptors. DYF‐E with an ethynyl linker exhibits more twisted backbone conformation and mitigated aggregation property compared to DYF‐V, inducing desirable blend morphologies with a polymer donor including high crystallinity, face‐on oriented packing structures, and well‐intermixed domains. Thus, the DYF‐E‐based OSCs exhibit a high PCE (17.02%), which significantly outperforms the DYF‐V‐based OSCs (PCE = 9.98%). Furthermore, the ternary OSCs based on DYF‐E achieve a higher PCE of 18.53%. Thus, this study highlights the significance of selecting an appropriate linker in core‐linked dimerized SMAs for producing high‐performance OSCs.

Oh, Shinbee↗
DOE OSTI2024

Effect of Molecular Conformation on Intermolecular Interactions and Photovoltaic Performances of Giant Molecule Acceptors

The molecular conformation of giant molecule acceptors (GMAs) plays a significant role in regulating the intermolecular interactions and their photovoltaic performances in organic solar cells (OSCs). For the linear GMA GT‐l, the stronger homo‐molecular interaction causes its aggregation being weakly affected by the donor, thus forming an ordered molecular stacking and proper phase separation in its blend film. The star‐shaped GMA GT‐s‐based blend film shows a dominant hetero‐molecular interaction that suppresses the aggregation of the donor and acceptor, resulting in smaller phase separation and more uniform vertical phase distribution. While for another star‐shaped GMA GTs, the weakest hetero‐molecular interaction causes its blend film to form larger phase separation. Therefore, the GT‐l based OSC with PM6 as donor shows the highest charge mobilities, the fastest charge transfer (CT) process, reduced energy loss and less charge recombination, contributing to a higher power conversion efficiency (PCE) of 19.03%. Comparatively, the PCEs of the OSCs based on GTs and GT‐s are 18.05% and 17.58% respectively. Notably, all the three GMAs based OSCs show excellent thermal stability and long‐term storage stability. This study provides a facile strategy by tuning the linking unit and its connecting mode for designing highly efficient and stable organic photovoltaic materials.

Chemistry↗
DOE OSTI2026

Temperature‐Dependent Crystallization in Two‐Step Perovskite Deposition Revealed by In Situ GIWAXS and Machine Learning‐Guided Analysis

The performance and stability of perovskite solar cells are strongly governed by the crystallization behavior of their active layer. In two-step sequential deposition, early-stage film formation plays a decisive role in determining final phase purity and device quality. Guided by a data-driven analysis of nearly 39 000 devices in the FAIR perovskite database, we identified solvent-mediated quenching and thermal processing as key variables affecting power conversion efficiency (PCE), particularly in two-step fabrication. Here, to investigate these effects in real time, we designed and implemented a custom-built, temperature-controlled spin-coating system, enabling precise thermal modulation during precursor deposition. Using this platform, we performed in situ GIWAXS measurements to study the crystallization dynamics of FA 0.5 MA 0.5 PbI 3 films over a temperature range of 30°C–90°C. Our results reveal a non-monotonic relationship between spin-coating temperature and α-phase formation, governed by the interplay between precursor interdiffusion, PbI 2 crystallinity, and δ-phase suppression. The custom thermal control enabled us to isolate and quantify these competing effects during the earliest stages of film formation, providing mechanistic insight into how spin-coating temperature governs both phase purity and kinetic pathways in two-step perovskite systems. Temperature-dependent SEM and photovoltaic device measurements further demonstrate that early-stage crystallization pathways directly translate into differences in morphology, charge-transport continuity, and device performance. These findings inform targeted strategies for optimizing deposition protocols to balance rapid nucleation, phase stability, and device performance.

Saadawy, Ahmed [King Fahd University of Petroleum ↗
DOE OSTI2020

Choose Your Own Adventure: Fabrication of Monolithic All-Perovskite Tandem Photovoltaics

Metal halide perovskites (MHPs) have transfixed the photovoltaic (PV) community due to their outstanding and tunable optoelectronic properties coupled to demonstrations of high-power conversion efficiencies (PCE) at a range of bandgaps. This has motivated the field to push perovskites to reach the highest possible performance. One way to increase the efficiency is by fabricating multijunction solar cells, which can split the solar spectrum, reducing thermalization loss. Low-cost all-perovskite tandems have a real chance to soon exceed 30% PCE, which could transform the PV industry. Achieving this goal requires the identification of perovskite sub-cells that are both highly efficient and can be effectively integrated. In this review, it is discussed how to navigate the multiple-choice adventure in choosing between the myriad of options and considerations present when deciding what perovskite materials, contact layers, and processing tools to use. Some of the potential fabrication pitfalls often encountered in MHP based tandem PVs are highlighted, so that they can hopefully be avoided in the future.

14 SOLAR ENERGY↗
DOE OSTI2020

The Role of Demixing and Crystallization Kinetics on the Stability of Non‐Fullerene Organic Solar Cells

Abstract With power conversion efficiency now over 17%, a long operational lifetime is essential for the successful application of organic solar cells. However, most non‐fullerene acceptors can crystallize and destroy devices, yet the fundamental underlying thermodynamic and kinetic aspects of acceptor crystallization have received limited attention. Here, room‐temperature (RT) diffusion coefficients of 3.4 × 10 −23 and 2.0 × 10 −22 are measured for ITIC‐2Cl and ITIC‐2F, two state‐of‐the‐art non‐fullerene acceptors. The low coefficients are enough to provide for kinetic stabilization of the morphology against demixing at RT. Additionally profound differences in crystallization characteristics are discovered between ITIC‐2F and ITIC‐2Cl. The differences as observed by secondary‐ion mass spectrometry, differential scanning calorimetry (DSC), grazing‐incidence wide‐angle X‐ray scattering, and microscopy can be related directly to device degradation and are attributed to the significantly different nucleation and growth rates, with a difference in the growth rate of a factor of 12 at RT. ITIC‐4F and ITIC‐4Cl exhibit similar characteristics. The results reveal the importance of diffusion coefficients and melting enthalpies in controlling the growth rates, and that differences in halogenation can drastically change crystallization kinetics and device stability. It is furthermore delineated how low nucleation density and large growth rates can be inferred from DSC and microscopy experiments which could be used to guide molecular design for stability.

Hu, Huawei↗
DOE OSTI2020

Thermodynamic Properties and Molecular Packing Explain Performance and Processing Procedures of Three D18:NFA Organic Solar Cells

Abstract Organic solar cells (OSCs) based on D18:Y6 have recently exhibited a record power conversion efficiency of over 18%. The initial work is extended and the device performance of D18‐based OSCs is compared with three non‐fullerene acceptors, Y6, IT‐4F, and IEICO‐4Cl, and their molecular packing characteristics and miscibility are studied. The D18 polymer shows unusually strong chain extension and excellent backbone ordering in all films, which likely contributes to the excellent hole‐transporting properties. Thermodynamic characterization indicates a room‐temperature miscibility for D18:Y6 and D18:IT‐4F near the percolation threshold. This corresponds to an ideal quench depth and explains the use of solvent vapor annealing rather than thermal annealing. In contrast, D18:IEICO‐4Cl is a low‐miscibility system with a deep quench depth during casting and poor morphology control and low performance. A failure of ternary blends with PC 71 BM is likely due to the near‐ideal miscibility of Y6 to begin with and indicates that strategies for developing successful ternary or quaternary solar cells are likely very different for D18 than for other high‐performing donors. This work reveals several unique property–performance relations of D18‐based photovoltaic devices and helps guide design or fabrication of yet higher efficiency OSCs.

Wang, Zhen↗
DOE OSTI2021

Texture Formation in Polycrystalline Thin Films of All‐Inorganic Lead Halide Perovskite

Abstract Controlling grain orientations within polycrystalline all‐inorganic halide perovskite solar cells can help increase conversion efficiencies toward their thermodynamic limits; however, the forces governing texture formation are ambiguous. Using synchrotron X‐ray diffraction, mesostructure formation within polycrystalline CsPbI 2.85 Br 0.15 powders as they cool from a high‐temperature cubic perovskite (α‐phase) is reported. Tetragonal distortions (β‐phase) trigger preferential crystallographic alignment within polycrystalline ensembles, a feature that is suggested here to be coordinated across multiple neighboring grains via interfacial forces that select for certain lattice distortions over others. External anisotropy is then imposed on polycrystalline thin films of orthorhombic (γ‐phase) CsPbI 3‐ x Br x perovskite via substrate clamping, revealing two fundamental uniaxial texture formations; i) I‐rich films possess orthorhombic‐like texture (<100> out‐of‐plane; <010> and <001> in‐plane), while ii) Br‐rich films form tetragonal‐like texture (<110> out‐of‐plane; <110> and <001> in‐plane). In contrast to relatively uninfluential factors like the choice of substrate, film thickness, and annealing temperature, Br incorporation modifies the γ‐CsPbI 3− x Br x crystal structure by reducing the orthorhombic lattice distortion (making it more tetragonal‐like) and governs the formation of the different, energetically favored textures within polycrystalline thin films.

Steele, Julian A.↗
DOE OSTI2022

Additive‐Free, Low‐Temperature Crystallization of Stable α‐FAPbI 3 Perovskite

Abstract Formamidinium lead triiodide (FAPbI 3 ) is attractive for photovoltaic devices due to its optimal bandgap at around 1.45 eV and improved thermal stability compared with methylammonium‐based perovskites. Crystallization of phase‐pure α‐FAPbI 3 conventionally requires high‐temperature thermal annealing at 150 °C whilst the obtained α‐FAPbI 3 is metastable at room temperature. Here, aerosol‐assisted crystallization (AAC) is reported, which converts yellow δ‐FAPbI 3 into black α‐FAPbI 3 at only 100 °C using precursor solutions containing only lead iodide and formamidinium iodide with no chemical additives. The obtained α‐FAPbI 3 exhibits remarkably enhanced stability compared to the 150 °C annealed counterparts, in combination with improvements in film crystallinity and photoluminescence yield. Using X‐ray diffraction, X‐ray scattering, and density functional theory simulation, it is identified that relaxation of residual tensile strains, achieved through the lower annealing temperature and post‐crystallization crystal growth during AAC, is the key factor that facilitates the formation of phase‐stable α‐FAPbI 3 . This overcomes the strain‐induced lattice expansion that is known to cause the metastability of α‐FAPbI 3 . Accordingly, pure FAPbI 3 p–i–n solar cells are reported, facilitated by the low‐temperature (≤100 °C) AAC processing, which demonstrates increases of both power conversion efficiency and operational stability compared to devices fabricated using 150 °C annealed films.

36 MATERIALS SCIENCE↗
DOE OSTI2022

More Powerful Twistron Carbon Nanotube Yarn Mechanical Energy Harvesters

We report that stretching a coiled carbon nanotube (CNT) yarn can provide large, reversible electrochemical capacitance changes, which convert mechanical energy to electricity. Here, it is shown that the performance of these “twistron” harvesters can be increased by optimizing the alignment of precursor CNT forests, plastically stretching the precursor twisted yarn, applying much higher tensile loads during precoiling twist than for coiling, using electrothermal pulse annealing under tension, and incorporating reduced graphene oxide nanoplates. The peak output power for a 1 and a 30 Hz sinusoidal deformation are 0.73 and 3.19 kW kg -1 , respectively, which are 24- and 13-fold that of previous twistron harvesters at these respective frequencies. This performance at 30 Hz is over 12-fold that of other prior-art mechanical energy harvesters for frequencies between 0.1 and 600 Hz. The maximum energy conversion efficiency is 7.2-fold that for previous twistrons. Twistron anode and cathode yarn arrays are stretched 180° out-of-phase by locating them in the negative and positive compressibility directions of hinged wine-rack frames, thereby doubling the output voltage and reducing the input mechanical energy.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Dual–Interface–Reinforced Flexible Perovskite Solar Cells for Enhanced Performance and Mechanical Reliability

Two key interfaces in flexible perovskite solar cells (f-PSCs) are mechanically reinforced simultaneously: one between the electron-transport layer (ETL) and the 3D metal-halide perovskite (MHP) thin film using self-assembled monolayer (SAM), and the other between the 3D-MHP thin film and the hole-transport layer (HTL) using an in situ grown low-dimensional (LD) MHP capping layer. The interfacial mechanical properties are measured and modeled. This rational interface engineering results in the enhancement of not only the mechanical properties of both interfaces but also their optoelectronic properties holistically. As a result, the new class of dual-interface-reinforced f-PSCs has an unprecedented combination of the following three important performance parameters: high power-conversion efficiency (PCE) of 21.03% (with reduced hysteresis), improved operational stability of 1000 h T90 (duration at 90% initial PCE retained), and enhanced mechanical reliability of 10 000 cycles n88 (number of bending cycles at 88% initial PCE retained). Furthermore, the scientific underpinnings of these synergistic enhancements are elucidated.

14 SOLAR ENERGY↗
DOE OSTI2023

Triiodide Attacks the Organic Cation in Hybrid Lead Halide Perovskites: Mechanism and Suppression

Molecular I 2 can be produced from iodide-based lead perovskites under thermal stress; triiodide, I 3 − , is formed from this I 2 and I − . Triiodide attacks protic cation MA + - or FA + -based lead halide perovskites (MA + , methylammonium; FA + , formamidinium) as explicated through solution-based nuclear magnetic resonance (NMR) studies: triiodide has strong hydrogen-bonding affinity for MA + or FA + , which leads to their deprotonation and perovskite decomposition. Triiodide is a catalyst for this decomposition that can be obviated through perovskite surface treatment with thiol reducing agents. In contrast to methods using thiol incorporation into perovskite precursor solutions, no penetration of the thiol into the bulk perovskite is observed, yet its surface application stabilizes the perovskite against triiodide-mediated thermal stress. Thiol applied to the interface between FAPbI 3 and Spiro-OMeTAD (“Spiro”) prevents oxidized iodine species penetration into Spiro and thus preserves its hole-transport efficacy. Surface-applied thiol affects the perovskite work function; it ameliorates hole injection into the Spiro overlayer, thus improving device performance. It helps to increase interfacial adhesion (“wetting”): fewer voids are observed at the Spiro/perovskite interface if thiols are applied. Perovskite solar cells (PSCs) incorporating interfacial thiol treatment maintain over 80% of their initial power conversion efficiency (PCE) after 300 h of 85 °C thermal stress.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Rational Design of A Chemical Bath Deposition Based Tin Oxide Electron Transport Layer for Perovskite Photovoltaics

Chemical bath deposition is widely used to deposit SnO x as an electron transport layer in perovskite solar cells (PSCs). The conventional recipe uses thioglycolic acid (TGA) to facilitate attachments of SnO x particles onto the substrate. However, nonvolatile TGA has been reported to harm the operational stability of PSCs. In this work, we introduced a volatile oxalic acid (OA) as an alternative to TGA. OA, a dicarboxylic acid, functions as a chemical linker for the nucleation and attachment of particles to the substrate in the chemical bath. Moreover, OA can be readily removed through thermal annealing followed by a mild H 2 O 2 treatment, as shown by FTIR measurements. Synergistically, the mild H 2 O 2 treatment selectively oxidizes the surface of the SnOx layer, minimizing nonradiative interface carrier recombination. EELS (electron-energy-loss-spectroscopy) confirms that the SnO x surface is dominated by Sn 4+ , while the bulk is a mixture of Sn 2+ and Sn 4+ . This rational design of a CBD SnO x layer leads to devices with T85~1,500h, a significant improvement over the TGA-based device with T80~250h. Our champion device reached a power conversion efficiency of 24.6%. This work offers a rationale for optimizing the complex parameter space of CBD SnO x to achieve efficient and stable PSCs.

14 SOLAR ENERGY↗
DOE OSTI2023

Eco–Friendly Solvent Engineered CsPbI 2.77 Br 0.23 Ink for Large–Area and Scalable High Performance Perovskite Solar Cells

The performance of large-area perovskite solar cells (PSCs) has been assessed for typical compositions, such as methylammonium lead iodide (MAPbI 3 ), using a blade coater, slot-die coater, solution shearing, ink-jet printing, and thermal evaporation. However, the fabrication of large-area all-inorganic perovskite films is not well developed. This study develops, for the first time, an eco-friendly solvent engineered all-inorganic perovskite ink of dimethyl sulfoxide (DMSO) as a main solvent with the addition of acetonitrile (ACN), 2-methoxyethanol (2-ME), or a mixture of ACN and 2-ME to fabricate large-area CsPbI 2.77 Br 0.23 films with slot-die coater at low temperatures (40–50 °C). The perovskite phase, morphology, defect density, and optoelectrical properties of prepared with different solvent ratios are thoroughly examined and they are correlated with their respective colloidal size distribution and solar cell performance. Here, the optimized slot-die-coated CsPbI 2.77 Br 0.23 perovskite film, which is prepared from the eco-friendly binary solvents dimethyl sulfoxide:acetonitrile (0.8:0.2 v/v), demonstrates an impressive power conversion efficiency (PCE) of 19.05%. Moreover, the device maintains ≈91% of its original PCE after 1 month at 20% relative humidity in the dark. It is believed that this study will accelerate the reliable manufacturing of perovskite devices.

binary and ternary solvent↗