SEARCH · Engineering Papers

Results for “constrained regions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

All sources NASA NTRS DOE OSTI

NASA NTRS1986

In situ stratospheric ozone measurements by long path UV absorption - Developments and interpretation

A high-sensitivity, in situ UV absorption ozone sensor has been developed for use in the stratosphere. The instrument couples 254-nm radiation from a low-pressure mercury discharge lamp into a 40-pass White cell to attain a high-sensitivity ozone absorption measurement. Preflight/postflight laboratory tests utilizing an ozone source coupled to a laboratory UV ozone photometer in a fast-flow system as well as in-flight diagnostics verify the successful operation of the instrument. Evidence is presented to verify that in situ UV absorption ozone photometers can measure stratospheric ozone with better than 3 percent precision and 5 percent accuracy, provided proper attention is given to both the thermal field surrounding the gondola and the ambient pressure measurements. Ozone data are compared with modeled profiles in the 28- to 40-km region. An assessment of the disagreement between observations and modeled profiles is given along with suggestions for future experiments designed to constrain photochemical models.

Weinstock, E. M.↗

NASA NTRS1984

Laminar flow control leading edge glove flight test article development

A laminar flow control (LFC) flight test article was designed and fabricated to fit into the right leading edge of a JetStar aircraft. The article was designed to attach to the front spar and fill in approx. 70 inches of the leading edge that are normally occupied by the large slipper fuel tank. The outer contour of the test article was constrained to align with an external fairing aft of the front spar which provided a surface pressure distribution over the test region representative of an LFC airfoil. LFC is achieved by applying suction through a finely perforated surface, which removes a small fraction of the boundary layer. The LFC test article has a retractable high lift shield to protect the laminar surface from contamination by airborne debris during takeoff and low altitude operation. The shield is designed to intercept insects and other particles that could otherwise impact the leading edge. Because the shield will intercept freezing rain and ice, a oozing glycol ice protection system is installed on the shield leading edge. In addition to the shield, a liquid freezing point depressant can be sprayed on the back of the shield.

Pearce, W. E.↗

NASA NTRS1991

Recovery of reflectance from imaging spectrometer measured radiance using a radiative transfer code

Radiance data were acquired over part of the Clark Mountain Range, California in 1990 by the Airborne Visible Infrared Imaging Spectrometer (AVIRIS). From these calibrated radiance data, the lateral distribution of water vapor in precipitable mm was recovered through analysis of the 940 nm water absorption. Surface pressure height was calculated from the 760 nm oxygen absorption band in the AVIRIS data. Surface slopes are estimated from relative elevations derived from the equivalent water vapor elevation for a standard atmosphere. Atmospheric optical depths measured at the Mountain Pass site in these data are extended to the entire region and varied based on the calculated surface pressure elevation. These parameters, derived from every AVIRIS spatial element, are used to constrain the LOWTRAN 7 radiative transfer code for the recovery of surface reflectance. Once transformed to reflectance, the imaging spectrometer data may be analyzed quantitatively for determination of surface composition, and compared with reflectance measurements acquired from different locations, times, and instruments.

Green, Robert O.↗

NASA NTRS2017

Tidal Prediction

Tides are the most predictable of oceanographic phenomena, due both to the simplicity and predictability of the astronomical forcing and to the near linearity of the ocean's dynamical response. In the classical and simplest scenario, tidal prediction is based on harmonic analysis of past measurements at a fixed location. Limits to predictability arise because isolated astronomical spectral lines are broadened into "cusps" of incoherent energy, for example through interactions with non-tidal flows. Tidal prediction at locations without past measurements has historically been a major challenge, but, owing to near-global observations of modern satellite altimeters, the empirical harmonic approach now yields reasonably accurate predictions throughout most of the open ocean. Advances in numerical modeling and data assimilation allow these predictions to be refined (especially in shallow seas where observations remain insufficient to directly constrain tidal wave structure) and extended to include tidal currents. We review recent progress in the development of global and regional-scale tidal prediction capabilities, summarize accuracy of available charts, and briefly consider outstanding issues. Satellite altimetry has also helped unravel the global tidal energy budget and has clarified the role of internal tides as a sink of tidal energy. We summarize these results, and then turn to the challenging problem of predicting internal tides. To the extent that low modes remain coherent with the surface tide, elevations can be directly mapped. We review current efforts in this direction, which are already producing charts with predictive capability. However, internal tides (especially higher modes) interact much more strongly with lower-frequency ocean flows, so a significant fraction of this tidal signal is intermittent and incoherent. We close with a brief review of ongoing efforts to model global tides in combination with wind-forced ocean motions.

Harmonic Constants↗

NASA NTRSDate not supplied

Mantle Source Mineralogy Inferred from Incompatible Element Ratios in Shergottites

The mineralogy of the martian mantle is a poorly known but vital compositional parameter. In the absence of samples of martian mantle peridotites, the mineralogy has been inferred from bulk composition constrained by a mix of cosmochemical and martian meteoritic constraints. Such a mineralogy reflects the primordial mantle composition, but mantle source regions that differentiated from a magma ocean are not likely to have the same mineralogy as bulk silicate Mars. An alternative approach is to infer source mineralogy of the martian mantle from the analysis of incompatible elements in shergottites. In a recent study, we showed that the general compatibility order of trace lithophile elements in martian mantle is similar to that of MORB mantle, with some exceptions. Compared to MORB mantle, in martian mantle: (1) highly incompatible elements (Th, Nb, Ta and U) are less incompatible relative to La; (2) K is significantly more compatible with respect to other elements; and (3) the HREEs are more compatible. In this study, we calculated effective partition coefficients of trace elements directly from martian igneous meteorites and used this data to infer the source mineralogy of the martian mantle.

Mars↗

NASA NTRSDate not supplied

A14H-04 Analysis of Simulated and Observed Trends in Global Surface PM2.5 and Aerosol Optical Properties from 1958 to 2018 Using the NASA GEOSCCM

Modeling of long-term trends of aerosols and their properties is important for constraining aerosol-climate forcing, and for characterizing changes in particulate matter pollution speciation and exposure. Here we study global and regional long-term trends in surface fine particulate matter (PM ) and aerosol optical properties for 60 years from 1958 to 2018, using simulations performed with the NASA Goddard Earth Observing System Chemistry Climate Model (GEOSCCM), and evaluate the model hindcast with observations for the last three decades. Comparing the modeled aerosols with a diverse set of observations helps interpret observed and simulated trends, and serves as a benchmark for future GEOSCCM developments and input datasets improvements. We first characterize modeled global and regional temporal changes in surface PM and its components, aerosol optical depth (AOD) and single scattering albedo (SSA) and we interpret their link with emissions drivers. We then compare modeled surface PM with ground-based observations from monitoring networks and with global reconstructed PM datasets from observations-model data fusion. Total AOD is compared with long-term satellite measurements from the Moderate Resolution Imaging Spectroradiometer (MODIS) and measurements from the ground-based Aerosol Robotic Network (AERONET). Additional aerosol optical properties, such as absorption and scattering coefficients, are evaluated with ground-based observations from the Global Atmosphere Watch (GAW) records.

aerosols↗

NASA NTRS2018

The Impact of Satellite Sea Surface Salinity for Prediction of the Coupled Indo-Pacific System

We assess the impact of satellite sea surface salinity (SSS) observations on seasonal to interannual variability of tropical Indo-Pacific Ocean dynamics as well as on dynamical ENSO forecasts. Our coupled model is composed of a primitive equation ocean model for the tropical Indo-Pacific region that is coupled with the global SPEEDY atmospheric model (Molteni, 2003). The Ensemble Reduced Order Kalman Filter is used to assimilate observations to constrain dynamics and thermodynamics for initialization of the coupled model. The baseline experiment assimilates satellite sea level, SST, and in situ subsurface temperature and salinity observations. This baseline is then compared with experiments that additionally assimilate Aquarius (version 4.0) and SMAP (version 2.0) SSS. Twelve-month forecasts are initialized for each month from Sep. 2011 to Dec. 2016. We find that including satellite SSS significantly improves NINO3.4 sea surface temperature anomaly validation after 1 out to 12 month forecast lead times. For initialization of the coupled forecast, the positive impact of SSS assimilation is brought about by surface freshening near the eastern edge of the western Pacific warm pool and density changes that lead to shallower mixed layer between 10S-5N. SST differences at initialization force wide-spread downwelling favorable curl over most of the tropical Pacific. Over an average forecast, SST remains warmer with SSS assimilation at the eastern edge of the warm pool. This warm SST propagates into the eastern Pacific and drags westerly wind anomalies eastward into the NINO3.4 region. In addition, salting near the ITCZ leads to a deepening of the mixed layer and thermocline near 8N. These patterns together lead to a funneling effect that provides the background state to amplify equatorial Kelvin waves. We show that the downwelling Kelvin waves are amplified by assimilating satellite SSS and lead to significantly improved forecasts particularly for the 2015 El Nino.

SST↗

DOE OSTI2024

Joint Inversion of Regional Waveform, First-Motion Polarity, and Synthetic Aperture Radar Surface Displacement for the Fourth and Sixth North Korean Declared Nuclear Explosions

Here, this study analyzed the Democratic People’s Republic of Korea’s (DPRK) fourth (DPRK4, 6 January 2016 M w 4.49) and sixth (DPRK6, 7 September 2017 M w 5.2) declared nuclear tests, employing a joint seismic and Interferometric Synthetic Aperture Radar (InSAR) inversion to improve understanding of these events and enhance moment tensor (MT) inversion capabilities. The recent efforts have focused on employing seismic waveform and InSAR geodetic deformation data separately to analyze these and the previous nuclear tests (e.g., Chiang et al., 2018; Myers et al., 2018; Wang et al., 2018). Building upon our previous work (Chi-Durán et al., 2021), we performed a joint regional waveform, first-motion (FM) polarity, and surface displacement inversion, which demonstrated improved source-type discrimination, a revised MT solution with reduced scalar moment uncertainty, and an independently constrained location. In this article, we build on the previous results for DPRK6 by including an analysis using a four-layered velocity model with free-surface topography to compute the near-source static deformation Green’s functions. The model consists of a 50 m basalt layer (⁠V P = 2.07 km/s, V S = 1.2 km/s⁠), a 250 m stratified volcanic deposit layer (⁠V P = 1.73 km/s, V S = 1.0 km/s⁠), a 700 m weathered granodiorite layer (⁠V P = 2.5 km/s, V S = 1.3 km/s⁠⁠), and a granodiorite half-space (⁠V P = 5.35 km/s, V S = 3.09 km/s⁠⁠). The half-space shares the velocity of the regional MDJ2 velocity model (Ford et al., 2010), which has proven effective for waveform inversion in the region. This model considers the range of reported values for various lithologies and weathering effects. Our findings show that using the layered velocity model enhances the recovery of source location and depth for both the explosions by improving fits and reducing uncertainties. The joint inversion also improves source-type discrimination and better constrains the scalar seismic moment necessary for downstream yield estimation.

58 GEOSCIENCES↗

NASA NTRS2018

The Impact of Satellite Sea Surface Salinity for Prediction of the Coupled Indo-Pacific System

We assess the impact of satellite sea surface salinity (SSS) observations on seasonal to interannual variability of tropical Indo-Pacific Ocean dynamics as well as on dynamical ENSO forecasts. Our coupled model is composed of a primitive equation ocean model for the tropical Indo-Pacific region that is coupled with the global SPEEDY atmospheric model (Molteni, 2003). The Ensemble Reduced Order Kalman Filter is used to assimilate observations to constrain dynamics and thermodynamics for initialization of the coupled model. The baseline experiment assimilates satellite sea level, SST, and in situ subsurface temperature and salinity observations. This baseline is then compared with experiments that additionally assimilate Aquarius (version 4.0) and SMAP (version 2.0) SSS. Twelve-month forecasts are initialized for each month from Sep. 2011 to Dec. 2016. We find that including satellite SSS significantly improves NINO 3.4 sea surface temperature anomaly validation after 1 out to 12 month forecast lead times. For initialization of the coupled forecast, the positive impact of SSS assimilation is brought about by surface freshening near the eastern edge of the western Pacific warm pool and density changes that lead to shallower mixed layer between 10 degrees South latitude-5 degrees North latitude. SST differences at initialization force wide-spread downwelling favorable curl over most of the tropical Pacific. Over an average forecast, SST remains warmer with SSS assimilation at the eastern edge of the warm pool. This warm SST propagates into the eastern Pacific and drags westerly wind anomalies eastward into the NINO 3.4 region. In addition, salting near the ITCZ (Intertropical Convergence Zone) leads to a deepening of the mixed layer and thermocline near 8 degrees North latitude. These patterns together lead to a funneling effect that provides the background state to amplify equatorial Kelvin waves. We show that the downwelling Kelvin waves are amplified by assimilating satellite SSS and lead to significantly improved forecasts particularly for the 2015 El Nino.

El Nino↗

DOE OSTI2024

Using a 1D Radially Symmetric Coda Envelope Model for Robust Moment Magnitude ( M w ) Estimation in Iraq’s Tectonically Diverse Zones

Robust estimation of moment magnitude (M w ) can be challenging for Iraq due to the strong lateral heterogeneity across diverse tectonic zones. We aim to improve moment magnitude estimation by investigating the reliability of using a 1D coda envelope model in diverse tectonic zones of different lateral effects and offer a way forward for reliable estimates of M w for small events that are difficult to waveform model. Iraq comprises two main tectonic zones: (1) the Outer platform, consisting of the northwestern Zagros fold-thrust belt and the Mesopotamian foredeep, and (2) the Inner Arabian platform which is overlain by the Iraqi desert. A simple 1D coda envelope model was used because coda waves have a low sensitivity to the source and path heterogeneity. Three separate coda calibrations were conducted to investigate the robustness of a single 1D calibration to fit the country: Whole-region calibration, Zagros calibration, and Mesopotamia calibration. In the whole-region calibration, we used stations from both the Zagros and Mesopotamia zones. In the two other calibration models, we used only stations that were in those particular zones. Ground-truth reference spectra derived from the coda spectral ratio method were used to constrain high-frequency site terms. There was no drastic difference when comparing the moment magnitudes calculated from the waveform modeling and the three calibration models. The results show that the 1D coda envelope model is a reliable method even for a region with diverse tectonic zones. Therefore, we recommend using the whole-region calibration model for moment magnitude estimation that provides more complete path coverage and avoids biases introduced by path correction failures. The proposed calibration is a fundamental step in updating the comprehensive earthquake catalog and probabilistic seismic hazard assessments for Iraq.

58 GEOSCIENCES↗

DOE OSTI2025

Simulations suggest offshore wind farms modify low-level jets

Abstract. Offshore wind farms are scheduled to be constructed along the East Coast of the US in the coming years. Low-level jets (LLJs) – layers of relatively fast winds at low altitudes – also occur frequently in this region. Because LLJs provide considerable wind resources, it is important to understand how LLJs might change with turbine construction. LLJs also influence moisture and pollution transport; thus, the effects of wind farms on LLJs could also affect the region’s meteorology. In the absence of observations or significant wind farm construction as yet, we compare 1 year of simulations from the Weather Research and Forecasting (WRF) model with and without wind farms incorporated, focusing on locations chosen by their proximity to future wind development areas. We develop and present an algorithm to detect LLJs at each hour of the year at each of these locations. We validate the algorithm to the extent possible by comparing LLJs identified by lidar, constrained to the lowest 200 m, to WRF simulations of these very low LLJs (vLLJs). In the NOW-WAKES simulation data set, we find offshore LLJs in this region occur about 25 % of the time, most frequently at night, in the spring and summer months, in stably stratified conditions, and when a southwesterly wind is blowing. LLJ wind speed maxima range from 10 m s−1 to over 40 m s−1. The altitude of maximum wind speed, or the jet “nose”, is typically 300 m above the surface, above the height of most profiling lidars, although several hours of vLLJs occur in each month in the data set. The diurnal cycle for vLLJs is less pronounced than for all LLJs. Wind farms erode LLJs, as LLJs occur less frequently (19 %–20 % of hours) in the wind farm simulations than in the no-wind-farm (NWF) simulation (25 % of hours). When LLJs do occur in the simulation with wind farms, their noses are higher than in the NWF simulation: the LLJ nose has a mean altitude near 300 m for the NWF jets, but that nose height moves higher in the presence of wind farms, to a mean altitude near 400 m. Rotor region (30–250 m) wind veer is reduced across almost all months of the year in the wind farm simulations, while rotor region wind shear is similar in both simulations.

17 WIND ENERGY↗

NASA NTRS1995

Uplift of the Kenai Peninsula, Alaska, since the 1964 Prince William Sound earthquake

Using Global Positioning System (GPS) receivers, we reoccupied several leveling benchmarks on the Kenai Peninsula of Alaska which had been surveyed by conventional leveling immediately following the March 27, 1964, Prince William Sound earthquake (M(sub w) = 9.3). By combining the two sets of measurements with a new, high-resolution model of the geoid in the region, we were able to determine the cumulative 1993-1964 postseismic vertical displacement. We find uplift at all of our benchmarks, relative to Seward, Alaska, a point that is stable according to tide gauge data. The maximum uplift of about 1 m occurs near the middle of the peninsula. The region of maximum uplift appears to be shifted northwest relative to the point of maximum coseismic subsidence. If we use tide gauge data at Nikishka and Seward to constrain the vertical motion, then the observed uplift has a trenchward tilt (down to the southeast) as well as an arching component. To explain the observations, we use creep-at-depth models. Most acceptable models require a fault slip of about 2.75 m, although this result is not unique. If the slip has been continuous since the 1964 earthquake, then the average slip rate is nearly 100 mm/yr, twice the plate convergence rate. Comparing the net uplift achieved in 29 years with that observed over 11 years in an adjacent region southeast of Anchorage, Alaska, we conclude that the rate of uplift is decreasing. A further decrease in the uplift rate is expected as the 29-year averaged displacement rate is about twice the plate convergence rate and therefore cannot be sustained over the entire earthquake cycle.

Cohen, Steven↗

DOE OSTI2020

Weak neutral current axial form factor using $ \left(\overline{\nu}\right)\nu $-nucleon scattering and lattice QCD inputs

We present a determination of the neutral current weak axial charge $G$ $^{Z}_{A}$(0) = –0.654(3) stat (5) sys using the strange quark axial charge $G$ $^{s}_{A}$(0) calculated with lattice QCD. We then perform a phenomenological analysis, where we combine the strange quark electromagnetic form factor from lattice QCD with (anti)neutrino-nucleon scattering differential cross section from MiniBooNE experiments in a momentum transfer region 0.24 ≲ Q 2 ≲ 0.71 GeV 2 to determine the neutral current weak axial form factor $G$ $^{Z}_{A}$(Q 2 ) in the range of 0 ≲ Q 2 ≤ 1 GeV 2 . This yields a phenomenological value of $G$ $^{Z}_{A}$(0) = –0.687(89)stat(40)sys. The value of $G$ $^{Z}_{A}$(0) constrained by the lattice QCD calculation of $G$ $^{s}_{A}$(0), when compared to its phenomenological determination, provides a significant improvement in precision and accuracy and can be used to provide a constraint on the fit to $G$ $^{Z}_{A}$(Q 2 ) for Q 2 > 0. This constrained fit leads to an unambiguous determination of (anti)neutrino-nucleon neutral current elastic scattering differential cross section near Q 2 = 0 and can play an important role in numerically isolating nuclear effects in this region. We show a consistent description of $G$ $^{Z}_{A}$(Q 2 ) obtained from the (anti)neutrino-nucleon scattering cross section data requires a nonzero contribution of the strange quark electromagnetic form factor. We demonstrate the robustness of our analysis by providing a post-diction of the BNL E734 experimental data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2021

LANL Institutional Computing Highlight: Local Time-Stepping in Global to Regional Ocean Modeling (Annual Report) [Slides]

Multi-resolution global ocean simulations are possible with the Model for Prediction Across Scales-Ocean (MPAS-Ocean), although the model is currently constrained to a uniform time step. The time step is determined by the size of the smallest cell in the grid, according to the CFL condition. To overcome this issue, a local time stepping (LTS) scheme has been designed for MPAS-Ocean. We have made progress on implementing the LTS scheme, as well as quantitative results and performance tests.

58 GEOSCIENCES↗

NASA NTRS1994

Photometric diversity of terrains on Triton

Voyager disk-resolved images of Triton in the violet (0.41 micrometers) and green (0.56 micrometer wavelengths have been analyzed to derive the photometric characteristics of terrains on Triton. Similar conclusions are found using two distinct but related definitions of photometric units, one based on color ratio and albedo properties (A. S. McEwen, 1990), the other on albedo and brightness ratios at different phase angles (P. Lee et al., 1992). A significant diversity of photometric behavior, much broader than that discovered so far on any other icy satellite, occurs among Triton's terrains. Remarkably, differences in photometric behavior do not correlate well with geologic terrain boundaries defined on the basis of surface morphology. This suggests that in most cases photometric properties on Triton are controlled by thin deposits superposed on underlying geologic units. Single scattering albedos are 0.98 or higher and asymmetry factors range from -0.35 to -0.45 for most units. The most distinct scattering behavior is exhibited by the reddish northern units already identified as the Anomalously Scattering Region (ASR), which scatters light almost isotropically with g = -0.04. In part due to the effects of Triton's clouds and haze, it is difficult to constrain the value of bar-theta, Hapke's macroscopic roughness parameter, precisely for Triton or to map differences in bar-theta among the different photometric terrains. However, our study shows that Triton must be relatively smooth, with bar-theta less than 15-20 degs and suggests that a value of 14 degs is appropriate. The differences in photometric characteristics lead to significantly different phase angle behavior for the various terrains. For example, a terrain (e.g., the ASR) that appears dark relative to another at low phase angles will reverse its contrast (become relatively brighter) at larger phase angles. The photometric parameters have been used to calculate hemispherical albedos for the units and to infer likely surface temperatures. Based on these results, we determine that all but the most southerly regions (i.e., mostly south of the equator) of the reddish northern terrains are likely to have been covered with deposits of nitrogen frost at the time of the Voyager flyby, in agreement with the suggestion from the photometry that these units are overlain by a thin veneer of material.

Hillier, J.↗

NASA NTRS2014

Bulk Composition of Vesta as Constrained by the Dawn Mission and the HED Meteorites

Of the objects in the main asteroid belt, Vesta is of particular interest as it is large enough to have experienced internal differentiation (520 km diameter), and it is known to have a basaltic surface dominated by FeO-bearing pyroxenes. Furthermore, visible-IR spectra of Vesta and associated Vestoids are remarkably similar to laboratory spectra of Howardite-Eucrite-Diogenite (HED) meteorites, leading to the paradigm that the HEDs ultimately came from Vesta. Geochemical and petrological studies of the HEDs confirm the differentiated nature of the near-surface region of their parent body, and imply that crust extraction occurred well within the first 10 Ma of solar system history Vesta is therefore a prime target for studies that aim to constrain the earliest stages of planet building, and it is within this context that the NASA Dawn spacecraft orbited Vesta from July 2011 to September 2012. The results of the Dawn mission so far have significantly reinforced the HED-Vesta connection, confirming a significant degree of internal differentiation, a surface mineralogy compatible with that of the HEDs, and near-surface ratios of Fe/O and Fe/Si consistent with HED lithologies. The combination of data from the HED meteorites and the Dawn mission thus presents an unprecedented opportunity to use Vesta as a natural laboratory of early differentiation processes in the early solar system. However, the bulk composition of Vesta remains a significant unknown parameter, but one that plays a key role on the physical and chemical properties of the internal and surface reservoirs (core, mantle, crust). Several attempts have been made to constrain the bulk composition of the eucrite parent body, early endeavours relying on petrological or cosmochemical constraints. More recently, individual chondrite class compositions, or mixtures thereof, have been considered, constrained by considerations such as O-isotopes, trace-element ratios and siderophile element concentrations of the eucrites. The work presented here builds upon these latter studies, with the primary aims of: i) illustrating the potential diversity of the geochemical and geophysical properties of a fully differentiated Vesta-sized parent body, and ii) assessing which, if any, of the known chondritic bulk compositions are plausible analogues for proto-Vesta.

Toplis, M. J.↗

DOE OSTI2026

Arctic Deployment of a Fully Integrated Self-Powered Drifting Buoy Harvesting Wave Energy via a Triboelectric Nanogenerator

The Arctic Ocean remains one of the most poorly sampled regions on Earth, where improved in situ environmental monitoring is vital for advancing oceanographic and atmospheric studies. However, data collection efforts are constrained by the short operational lifespans and high costs of conventional systems. Drifting buoys powered by pendulum-driven wave energy harvesters offer a cost-effective alternative, yet earlier designs have neither been optimized for real-world wave conditions nor validated in the Arctic. In this study, we develop a self-powered drifting buoy that integrates a pendulum-driven triboelectric nanogenerator (TENG) system with a mechanical motion rectifier, a high-gear-ratio transmission, and power management circuits. Through coupled buoy–pendulum dynamic simulations and laboratory testing using a motion simulator, we identify an optimal pendulum mass of 1.6 kg (12.7% of total buoy weight) that maximizes energy output while maintaining buoy stability. Laboratory experiments achieved average power outputs of 12.7 mW under Arctic-like wave and temperature conditions. The system was successfully deployed in the Bering Sea, where it generated 11 J of energy in 3.1 m waves, marking the first Arctic deployment of a TENG-based drifting buoy for sea surface temperature monitoring. This work establishes a cost-effective framework for designing self-powered Arctic monitoring platforms and advances the feasibility of long-term environmental observations in real Arctic waters.

marine enerby↗

DOE OSTI2022

Single-particle and collective excitations in Zn 66

Single-particle and collective excitations in 66 Zn have been investigated via the multinucleon transfer reaction, 26 Mg( 48 Ca, α4nγ) using the Gammasphere multidetector array and the Fragment Mass Analyzer. In addition to confirming and complementing the previously known low-spin structure, a new quasi-rotational band comprising several stretched E2 transitions has been established to high spins. However, due to fragmentary nature of its decay, it was not possible to link this sequence to the low-lying states and, thus, determine the absolute excitation energies, spins, and parities unambiguously. Large-scale shell-model calculations employing the JUN45 and jj44b effective interactions are able to successfully describe the low-spin structure and herewith confirm that it is dominated by single-particle excitations. Furthermore, the newly established rotational cascade is compared with known superdeformed bands in the A ≈ 60–70 mass region, and with results of calculations performed within the frameworks of the cranked shell model and the adiabatic and configuration-fixed constrained covariant density functional theory and the quantum particle-rotor model.

59 ≤ A ≤ 89↗