SEARCH · Engineering Papers

Results for “compliant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

All sources NASA NTRS DOE OSTI

NASA NTRS2016

Experimenting Galileo on Board the International Space Station

The SCaN Testbed is an advanced integrated communications system and laboratory facility installed on the International Space Station (ISS) in 2012. The testbed incorporates a set of new generation of Software Defined Radio (SDR) technologies intended to allow researchers to develop, test, and demonstrate new communications, networking, and navigation capabilities in the actual environment of space. Qascom, in cooperation with ESA and NASA, is designing a Software Defined Radio GalileoGPS Receiver capable to provide accurate positioning and timing to be installed on the ISS SCaN Testbed. The GalileoGPS waveform will be operated in the JPL SDR that is constituted by several hardware components that can be used for experimentations in L-Band and S-Band. The JPL SDR includes an L-Band Dorne Margolin antenna mounted onto a choke ring. The antenna is connected to a radio front end capable to provide one bit samples for the three GNSS frequencies (L1, L2 and L5) at 38 MHz, exploiting the subharmonic sampling. The baseband processing is then performed by an ATMEL AT697 processor (100 MIPS) and two Virtex 2 FPGAs. The JPL SDR supports the STRS (Space Telecommunications Radio System) that provides common waveform software interfaces, methods of instantiation, operation, and testing among different compliant hardware and software products. The standard foresees the development of applications that are modular, portable, reconfigurable, and reusable. The developed waveform uses the STRS infrastructure-provided application program interfaces (APIs) and services to load, verify, execute, change parameters, terminate, or unload an application. The project is divided in three main phases. 1)Design and Development of the GalileoGPS waveform for the SCaN Testbed starting from Qascom existing GNSS SDR receiver. The baseline design is limited to the implementation of the single frequency Galileo and GPS L1E1 receiver even if as part of the activity it will be to assess the feasibility of a dual frequency implementation (L1E1+L5E5a) in the same SDR platform.2)Qualification and test the GalileoGPS waveform using ground systems available at the NASA Glenn Research Center. Experimenters can have access to two SCaN Testbed ground based systems for development and verification: the Experimenter Development System (EDS) that is intended to provide initial opportunity for software testing and basic functional validation and the Ground Integration Unit (GIU) that is a high fidelity version of the SCaN Testbed flight system and is therefore used for more controlled final development testing and verification testing.3)Perform in-orbit validation and experimentation: The experimentation phase will consists on the collection of raw measurements (pseudorange, Carrier phase, CN0) in space, assessment on the quality of the measurements and the receiver performances in terms of signal acquisition, tracking, etc. Finally computation of positioning in space (Position, Velocity and time) and assessment of its performance.(Complete abstract in attached document).

Galileo↗

NASA NTRS2013

XIPE the X-Ray Imaging Polarimetry Explorer

X-ray polarimetry, sometimes alone, and sometimes coupled to spectral and temporal variability measurements and to imaging, allows a wealth of physical phenomena in astrophysics to be studied. X-ray polarimetry investigates the acceleration process, for example, including those typical of magnetic reconnection in solar flares, but also emission in the strong magnetic fields of neutron stars and white dwarfs. It detects scattering in asymmetric structures such as accretion disks and columns, and in the so-called molecular torus and ionization cones. In addition, it allows fundamental physics in regimes of gravity and of magnetic field intensity not accessible to experiments on the Earth to be probed. Finally, models that describe fundamental interactions (e.g. quantum gravity and the extension of the Standard Model) can be tested. We describe in this paper the X-ray Imaging Polarimetry Explorer (XIPE), proposed in June 2012 to the first ESA call for a small mission with a launch in 2017. The proposal was, unfortunately, not selected. To be compliant with this schedule, we designed the payload mostly with existing items. The XIPE proposal takes advantage of the completed phase A of POLARIX for an ASI small mission program that was cancelled, but is different in many aspects: the detectors, the presence of a solar flare polarimeter and photometer and the use of a light platform derived by a mass production for a cluster of satellites. XIPE is composed of two out of the three existing JET-X telescopes with two Gas Pixel Detectors (GPD) filled with a He-DME mixture at their focus. Two additional GPDs filled with a 3-bar Ar-DME mixture always face the Sun to detect polarization from solar flares. The Minimum Detectable Polarization of a 1 mCrab source reaches 14 in the 210 keV band in 105 s for pointed observations, and 0.6 for an X10 class solar flare in the 1535 keV energy band. The imaging capability is 24 arcsec Half Energy Width (HEW) in a Field of View of 14.7 arcmin 14.7 arcmin. The spectral resolution is 20 at 6 keV and the time resolution is 8 s. The imaging capabilities of the JET-X optics and of the GPD have been demonstrated by a recent calibration campaign at PANTER X-ray test facility of the Max-Planck-Institut fr extraterrestrische Physik (MPE, Germany). XIPE takes advantage of a low-earth equatorial orbit with Malindi as down-link station and of a Mission Operation Center (MOC) at INPE (Brazil). The data policy is organized with a Core Program that comprises three months of Science Verification Phase and 25 of net observing time in the following 2 years. A competitive Guest Observer program covers the remaining 75 of the net observing time.

Astronomy X-ray Polarimetry↗

NASA NTRS2016

JPSS-1 VIIRS Version 2 At-Launch Relative Spectral Response Characterization and Performance

The relative spectral response (RSR) characterization of the JPSS-1 VIIRS spectral bands has achieved at launch status in the VIIRS Data Analysis Working Group February 2016 Version 2 RSR release. The Version 2 release improves upon the June 2015 Version 1 release by including December 2014 NIST TSIRCUS spectral measurements of VIIRS VisNIR bands in the analysis plus correcting CO2 influence on the band M13 RSR. The T-SIRCUS based characterization is merged with the summer 2014 SpMA based characterization of VisNIR bands (Version 1 release) to yield a fused RSR for these bands, combining the strengths of the T-SIRCUS and the SpMA measurement systems. The M13 RSR is updated by applying a model-based correction to mitigate CO2 attenuation of the SpMA source signal that occurred during M13 spectral measurements. The Version 2 release carries forward the Version 1 RSR for those bands that were not updated (M8-M12, M14-M16AB, I3-I5, DNBMGS). The Version 2 release includes band average (overall detectors and subsamples) RSR plus supporting RSR for each detector and subsample. The at-launch band average RSR have been used to populate Look-Up Tables supporting the sensor data record and environmental data record at-launch science products. Spectral performance metrics show that JPSS-1VIIRS RSR are compliant on specifications with a few minor exceptions. The Version 2 release, which replaces the Version 1 release, is currently available on the password-protected NASA JPSS-1 eRooms under EAR99 control.

Chris Moeller↗

NASA NTRS2017

NASA's Advanced TPS Materials and Technology Development: Multi-Functional Materials and Systems for Space Exploration

NASA's future missions will be more demanding. They require materials to be mass efficient, robust, multi-functional, scalable and able to be integrated with other subsystems to enable innovative missions to accomplish future science missions. Thermal protection systems and materials (TPSM) are critical for the robotic and human exploration of the solar system when it involves entry. TPSM is a single string system with no back-up. Mass efficiency and robustness are required. Integration of TPSM with the aeroshell is both a challenge and an opportunity. Since 2010, NASA's Space Technology Mission Directorate has invested in innovative new materials and systems across a spectrum of game changing technologies. In this keynote address, we plan to highlight and present our successful approaches utilized in developing four different materials and system technologies that use innovative new manufacturing techniques to meet mission needs. 3-D weaving and felt manufacturing allowed us to successfully propose new ways of addressing TPSM challenges. In the 3-D MAT project, we developed and delivered a multi-functional TPS materials solution, in under three years that is an enabler for Lunar Capable Orion Spacecraft. Under the HEEET project, we are developing a robust heat-shield that can withstand extreme entry conditions, both thermally and mechanically, for entry at Venus, Saturn or higher speed sample return missions. The improved efficiency of HEEET allows science missions entry at much reduced G'loads enabling delicate science instruments to be used. The ADEPT concept is a foldable and deployable entry system and the critical component is a multi-functional fabric that is foldable and deployable and also functions as a mechanical aeroshell and a TPS. The fourth technology we will highlight involves felt to address integration challenges of rigid ablative system such as PICA that was used on MSL. The felt technology allows us to develop a compliant TPS for easy integration. The above four technology developments have focused on mission infusion as the success criteria. These technologies are in different stages of mission infusion. These innovations have led to new mission concepts to be proposed in the future. In our keynote address we will present approaches we have employed throughout the project to create the bridge to transition from low TRL to mission infusion and to overcome the traditional TRL valley of death.

TPS↗

NASA NTRS2017

Biologically-Inspired Control for a Planetary Exploration Tensegrity Robot

Tensegrity structures are becoming increasingly popular as mechanical structures for robots. Their inherent compliance makes them extremely robust to environmental disturbances, and their design allows them to have a high strength-to-weight ratio whilst being lightweight compared to traditional robots. For these reasons they would be of interest to the aerospace industry, particularly for planetary exploration. However, being such compliant structures thanks to their network of elastic elements also means that their control is not an easy task. Relying solely on traditional control strategies to generate efficient locomotion would surely be near impossible due to the complex oscillatory motions and nonlinear interactions of its members. The goal of this project was to use bio-inspired control techniques to generate locomotion for a tensegrity icosahedron, namely the SUPERball project of the Intelligent Robotics Group of NASA Ames Research Center.

Leroy, Marc↗

NASA NTRS2017

Cloud Surprises in Moving NASA EOSDIS Applications into Amazon Web Services

NASA ESDIS has been moving a variety of data ingest, distribution, and science data processing applications into a cloud environment over the last 2 years. As expected, there have been a number of challenges in migrating primarily on-premises applications into a cloud-based environment, related to architecture and taking advantage of cloud-based services. What was not expected is a number of issues that were beyond purely technical application re-architectures. We ran into surprising network policy limitations, billing challenges in a government-based cost model, and difficulty in obtaining certificates in an NASA security-compliant manner. On the other hand, this approach has allowed us to move a number of applications from local hosting to the cloud in a matter of hours (yes, hours!!), and our CMR application now services 95% of granule searches and an astonishing 99% of all collection searches in under a second. And most surprising of all, well, you'll just have to wait and see the realization that caught our entire team off guard!

Cloud↗

NASA NTRS2018

The Opera Instrument: An Advanced Curation Development for Mars Sample Return Organic Contamination Monitoring

Mars Sample Return (MSR) requires strict organic contamination control (CC) and contamination knowledge (CK) as outlined by the Mars 2020 Organic Contamination Panel (OCP). This includes a need to monitor surficial organic contamination to a ng/sq. cm sensitivity level. Archiving and maintaining this degree of surface cleanliness may be difficult but has been achieved. MSR's CK effort will be very important because all returned samples will be studied thoroughly and in minute detail. Consequently, accurate CK must be collected and characterized to best interpret scientific results from the returned samples. The CK data are not only required to make accurate measurements and interpretations for carbon-depleted martian samples, but also to strengthen the validity of science investigations performed on the samples. The Opera instrument prototype is intended to fulfill a CC/CK role in the assembly, cleaning, and overall contamination history of hardware used in the MSR effort, from initial hardware assembly through post-flight sample curation. Opera is intended to monitor particulate and organic contamination using quartz crystal microbalances (QCMs), in a self-contained portable package that is cleanroom-compliant. The Opera prototype is in initial development capable of approximately 100 ng/sq. cm organic contamination sensitivity, with additional development planned to achieve 1 ng/sq. cm. The Opera prototype was funded by the 2017 NASA Johnson Space Center Innovation Charge Account (ICA), which provides funding for small, short-term projects.

Fries, M. D.↗

NASA NTRS2018

C++ Resource Intelligent Compilation for GPU Enabled Applications

We are nearing the limits of Moore's Law with current computing technology. As industries push for more performance from smaller systems, alternate methods of computation such as Graphics Processing Units (GPUs) should be considered. Many of these systems utilize the Compute Unified Device Architecture (CUDA) to give programmers access to individual compute elements of the GPU for general purpose computing tasks. Direct access to the GPU's parallel multi-core architecture enables highly efficient computation and can drastically reduce the time required for complex algorithms or data analysis. Of course not all systems have a CUDA-enabled device to leverage, and so applications must consider optional support for users with these devices. Resource Intelligent Compilation (RIC) addresses this situation by enabling GPU-based acceleration of existing applications without affecting users without GPUs. Resource Intelligent Compilation (RIC) creates C/C++ modules that can be compiled to create a standard CPU version or GPU accelerated version of a program, depending on hardware availability. This is accomplished through a toolbox of programming strategies based on features of the CUDA API. Using this toolbox, existing applications can be modified with ease to support GPU acceleration, and new applications can be generated with just a few simple modifications. All of this culminates in an accelerated application for users with the appropriate hardware, with no performance impact to standard systems. This memorandum presents all the important features involved in supporting and implementing RIC and an example of using RIC to accelerate an existing mathematical model, without removing support for standard users. Through this memorandum, NASA engineers can acquire a set of guidelines to follow for RIC-compliant development, seamlessly accelerating C/C++ applications.

GPU↗

NASA NTRS2018

Best Practices for Training the Structures Flight Test Engineer

The Structures Flight from 412th Test Wing and the Aerostructures Branch at NASA Armstrong Flight Research Center at Edwards Air Force Base have developed a set of best practices for training a structures flight test engineer. These practices represent the hard-won lessons learned and best practices from training generations of engineers to perform high risk envelope expansion and developmental flight test. Collectively, these organizations have tested many of the world's most advanced and innovative aircraft, including the B-2, C-17, F-22, F-35, RQ-4, X-29, F-18 High Angle of Attack Research Vehicle, X-53, G-III Adaptive Compliant Trailing Edge, and X-56.

flight tests↗

NASA NTRS2018

Flight and Ground Operations in Support of Airframe Noise Reduction Tests

The National Aeronautics and Space Administration (NASA) Acoustic Research Measurements (ARM) project was established to evaluate via flight tests the noise reduction benefits of the Adaptive Compliant Trailing Edge (ACTE) technology along with various main landing gear noise reduction concepts. The ACTE replaces the original Fowler flaps on the NASA SubsoniC Research Aircraft Testbed (SCRAT), thus creating a seamless trailing edge that provides significant noise abatement benefits. The various main landing gear noise reduction concepts are grouped under the LAnding Gear noisE Reduction (LAGER) task and consist of fairings placed on the main landing gear along with two separate treatments applied to the main landing gear wheel well cavities. This paper discusses the tasks necessary to prepare each of these technologies for the ARM flights. The LAGER hardware was taken from model-scale concepts tested in wind tunnels to flight hardware, which had to be cleared as airworthy for the ARM flights. The ACTE flaps were initially intended to be removed from the SCRAT prior to the start of the ARM project. Retaining the ACTE flaps on the aircraft for a longer period of time to support the ARM flights resulted in additional inspections and considerations since the ACTE flaps were flown longer and at certain flight conditions for longer periods of time than initially analyzed. The flight and ground operations required for the ARM tests required extensive coordination among multiple groups and organizations in order to be successful. This paper provides an overview of the hardware development, ground operations, and flight operations which went into acquiring the desired acoustic measurements. In general, the flights were successful and demonstrated the noise reduction benefits of the ACTE flaps, the LAGER gear fairings, and the LAGER gear cavity treatments.

ground operations↗

NASA NTRS2018

Method and Apparatus for Spacecraft Gyroscope Scale Factor Calibration

A method and apparatus for estimating gyro scale factor during normal spacecraft operations, using small attitude motions that are compliant with mission pointing accuracy and stability requirements and a signal processing method that specifically detects the intentionally induced motions. This process increases operational availability by avoiding the need to take the spacecraft offline for large calibration maneuvers.

Reth, Alan D↗

NASA NTRS2018

On-Orbit Verification of GLM Navigation on GOES-16

The GOES-R flight project has developed the Image Navigation and Registration (INR) Performance Assessment Tool Set (IPATS) to perform independent INR evaluations of the optical instruments on the GOES-R series spacecraft. In this presentation, we document the development of navigation (NAV) evaluation capabilities within IPATS for the Geostationary Lightning Mapper (GLM). We also discuss the post-processing quality filtering developed for GLM NAV, and present example results for several GLM background image datasets. Initial results suggest that GOES-16 GLM is compliant with navigation requirements.

GLM↗

NASA NTRS2018

On-Orbit Verification of GLM Navigation on GOES-16

The GOES-R flight project has developed the Image Navigation and Registration (INR) Performance Assessment Tool Set (IPATS) to perform independent INR evaluations of the optical instruments on the GOES-R series spacecraft. In this paper, we document the development of navigation (NAV) evaluation capabilities within IPATS for the Geostationary Lightning Mapper (GLM). We also discuss the post-processing quality filtering developed for GLM NAV, and present example results for several GLM datasets. Initial results suggest that GOES-16 GLM is compliant with navigation requirements.

On-Orbit↗

NASA NTRS2018

Evaluation of Geostationary Lightning Mapper (GLM) Navigation Performance with the INR Performance Assessment Toolset (IPATS)

Isaacson, Peter J.↗

NASA NTRS2018

NASA GIBS and Worldview: Leveraging Visualizations to Improve Data Discovery

NASA's Global Imagery Browse Services (GIBS) leverages scientific and community best practices and standards to provide a scalable, compliant, and authoritative source for NASA Earth Observing System (EOS) Earth science data visualizations. Since 2013, its goal has been to "transform how end users interact and discover [EOS] data through visualizations." Imagery layers within GIBS allow end users to easily and quickly interact with full resolution, pre-generated visualizations of scientific parameters. This interactive discovery approach relies on visual observation and identification of phenomena that are not as simply identified otherwise.

Global Imagery Browse Services↗

NASA NTRS2018

Two-Dimensional Planetary Surface Landers

We proposed to develop a new landing approach that significantly reduces development time and obviates the most complicated, most expensive, and highest-risk phase of a landing mission. The concept is a blanket- or carpet-like two-dimensional (2D) lander (~1-m × 1-m surface area and <1-cm thick) with a low mass/drag ratio, which allows the lander to efficiently shed its approach velocity and provide a more robust structure for landing integrity. The form factor of these landers allows dozens to be stacked on a single spacecraft for transport and distributed en masse to the surface. Lander surfaces will be populated on both sides by surface-mount, low-profile sensors and instruments, surface-mount telecom, solar cells, batteries, processors, and memory. Landers will also incorporate thin flexible electronics, made possible in part by printable electronics technology. The mass and size of these highly capable technologies further reduces the required stiffness and mass of the lander structures to the point that compliant, lightweight, robust landers capable of passive landings are possible. This capability avoids the costly, complex use of rockets, radar, and associated structure and control systems. This approach is expected to provide an unprecedented science payload mass to spacecraft mass ratio of approximately 80% (estimated based on current knowledge). This compared to ~1% for Pathfinder, ~17% for MER, and 22% for MSL rovers. Clearly, one difference is rovers vs. a lower capability lander. An outcome of the Phase I study is a clear roadmap for near-term demonstration and long-term technology development.

Landers↗

NASA NTRS2018

Serving NASA GES DISC Multi-Spatiotemporal Earth Science Data to the GIS community

NASA Earth Science (ES) data is essential to a wide range of GIS research and applications. However, for many GIS users, searching, accessing, using and analyzing NASA ES data can be of a great challenge- ranging from the sheer data volumes, types of science parameters, and to the complexity of data encoding formats. As one of the twelve NASA Science Mission Directorate (SMD) Data Centers, Goddard Earth Sciences (GES) Data and Information Services Center (DISC) archives and distributes petabytes of ES parameters covering atmosphere, land, and ocean fields. Most data are multidimensional and multi-spatiotemporal in nature and are encoded in different science data formats (e.g, HDF, HDF-EOS, netCDF, GRIB, binary), which usually contain multiple variables and different metadata information. By far, GES DISC has been developing a number of services and online tools to help GIS users to easily explore our data products. In this presentation, we will describe our ArcGIS-based data accessing and visualization services and portals, which allow users directly exploring the multi-spatiotemporal ES data in ArcGIS clients without having to pre-download/import the data. The ArcGIS services are also compliant with the Open Geospatial Consortium (OGC) Web Coverage Service (WCS) and Web Map Service (WMS) protocols and can be accessed by any other WCS/WMS clients to get customized GES DISC EO data on-the-fly from such services.

Wei, Jennifer↗

NASA NTRS2014

SUPERball: Exploring Tensegrities for Planetary Probes

The Dynamic Tensegrity Robotics Lab (DTRL) at NASA Ames Research Center is developing a compliant and distributed tensegrity robotic platform for planetary exploration. Working in collaboration with Ghent University, the DTRL built an untethered prototype robot, the SUPERball. In this work, multiple issues with the current SUPERball design are addressed, when considering an example mission to Titan. Specifically, engineering requirements for the mission are empirically validated, and the current design is extended under these requirements to meet expanded goals.Survival of impact forces under entry, descent, and landing are verified with a physical experiment performed in collaboration with the University of Idaho. Then, concepts for a fully-actuated redesign of SUPERball are generated, compared, and validated against current engineering requirements. This exploratory work moves the SUPERball project toward an eventual flight-ready design.\

Tensegrity↗