Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “co2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Study of regenerable CO2 sorbents for extravehicular activity

Studies have shown that frequent extravehicular activities planned for future space missions will require regenerable life support systems. The oxides of magnesium, zinc, and silver were tested for their ability to react with CO2 to form the corresponding carbonates, and subsequent thermal regeneration to the oxides. Catalysts and binders were investigated to enhance CO2 sorption rates and structural integrity. A silver oxide formulation was developed which rapidly absorbs 95% of its theoretical capacity and has shown no degradation through 28 regenerations.

Colombo, G. V.↗

Flow properties in expansion tube with helium, argon, air, and CO2

Test flow velocities from 5 to 7 km/sec were generated in a 6-in. expansion tube using helium, argon, air, and CO2 test gases. Pitot pressure profiles across the flow at the test section are presented for the four test gases, and measured flow quantities are compared to computer predicted values. Comparison of predicted and measured flow quantities suggests the expansion to be near thermochemical equilibrium for all test gases and implies the existence of a totally reflected shock at the secondary diaphragm. Argon, air, and CO2 flows were observed to attenuate while traversing the acceleration section, whereas no attenuation was observed for helium.

Miller, C. G.↗

A new upper limit for an atmosphere of CO2, CO on Mercury

High-resolution infrared spectra of Mercury (1.9-2.7 microns, resolution limit 0.134 wavelength/cm) obtained with the original 'Connes' interferometer at the Steward Observatory 90-inch telescope have provided a very sensitive test for the possible presence of a CO2, CO atmosphere. An improved upper limit of 0.12 cm-atm has been set for CO2, and a new upper limit of 0.05 cm-atm has been set for CO. Upper limits of similar magnitude can be established for CH4 and NH3. From the separation of the Mercury signal into reflected sunlight and thermal emission, we determine that the reflectivity decreases toward longer wavelengths and has a value of about 0.06 at 2.25 microns. Implications for the possible evolution of an atmosphere on Mercury are discussed.

Fink, U.↗

Shock shapes on blunt bodies in hypersonic-hypervelocity helium, air, and CO2 flows, and calibration results in Langley 6-inch expansion tube

Shock shape results for flat-faced cylinders, spheres, and spherically blunted cones in various test gases, along with preliminary results from a calibration study performed in the Langley 6-inch expansion tube are presented. Free-stream velocities from 5 to 7 km/sec are generated at hypersonic conditions with helium, air, and CO2, resulting in normal shock density ratios from 4 to 19. Ideal-gas shock shape predictions, in which an effective ratio of specific heats is used as input, are compared with the measured results. The effect of model diameter is examined to provide insight to the thermochemical state of the flow in the shock layer. The regime for which equilibrium exists in the shock layer for the present air and CO2 test conditions is defined. Test core flow quality, test repeatability, and comparison of measured and predicted expansion-tube flow quantities are discussed.

Miller, C. G., III↗

Angular distribution, kinetic energy distributions, and excitation functions of fast metastable oxygen fragments following electron impact of CO2

Dissociative excitation of CO2 by electron impact was studied using the methods of translational spectroscopy and angular distribution analysis. Earlier time of flight studies revealed two overlapping spectra, the slower of which was attributed to metastable CO(a3 pi) fragments. The fast peak is the focus of this study. Threshold energy, angular distribution, and improve time of flight measurements indicate that the fast peak actually consists of five overlapping features. The slowest of the five features is found to consist of metastable 0(5S) produced by predissociation of a sigma u + state of CO2 into 0(5S) + CO(a3 pi). Oxygen Rydberg fragments originating directly from a different sigma u + state are believed to make up the next fastest feature. Mechanisms for producing the three remaining features are discussed.

Misakian, M.↗

Interaction of graphite and ablative materials with CO2-laser, carbon-arc, and xenon-arc radiation

The behavior of graphite and several charring ablators in a variety of high radiative heat flux environments was studied in various radiative environments produced by a CO2 laser and a carbon arc facility. Graphite was also tested in xenon arc radiation. Tests were conducted in air nitrogen, helium, and a mixture of CO2 and nitrogen, simulating the Venus atmosphere. The experimental results are compared with theoretical results obtained with a one dimensional charring ablator analysis and a two dimensional subliming ablator analysis. Photomicroscopy showed no significant differences in appearance or microstructure of the charring ablators or graphite after testing in the three different facilities, indicating that the materials respond fundamentally the same to the radiation of different frequencies. The performance of phenolic nylon and graphite was satisfactorily predicted with existing analyses and published material property data.

Brewer, W. D.↗

High temperature chemical kinetic study of the H2-CO-CO2-NO reaction system

An experimental study of the kinetics of the H2-CO-CO2-NO reaction system was made behind incident shock waves at temperatures of 2460 and 2950 K. The overall rate of the reaction was measured by monitoring radiation from the CO + O yields CO2 + h upoilon reaction. Correlation of these data with a detailed reaction mechanism showed that the high-temperature rate of the reaction N + OH yields NO + H can be described by the low-temperature (320 K) rate coefficient. Catalytic dissociation of molecular hydrogen was an important reaction under the tests conditions.

Jachimowski, C. J.↗

Viking entry vehicle aerodynamics at m equals 2 in air and some preliminary test data for flight in CO2

The static and dynamic aerodynamic characteristics of the Viking entry vehicle were determined experimentally in free flight in air at a Mach number near 2. Preliminary results were also obtained in CO2 at M infinity = 11. The low speed tests in air confirmed a region of dynamic instability previously observed. The instability was greatest at the smallest pitch amplitudes but decreased with increasing amplitude until a limit cycle was reached at about 8 deg. The tests in CO2 indicated increased drag coefficients of 3 percent with respect to those in air. Errors in the drag coefficient of this magnitude would significantly affect the reconstruction of the Martian atmosphere during entry of the Viking spacecraft.

Sammonds, R. I.↗

Waveguide CO2 laser gain: Dependence on gas kinetic and discharge properties

Using a simple rate equation approach the gas kinetic and discharge properties of waveguide CO2 lasers were examined. The dependence was calculated of the population inversion and laser small signal gain on gas pressure, gas mixture, pumping rate (discharge current), tube bore diameter, and wall temperature. At higher pressures the gain is optimized by using more helium rich mixtures and smaller bore diameters. The dependence of laser tunability on the gas kinetic properties and cavity losses was determined, it was found that for loss cavities the laser tunability may substantially exceed the molecular fullwidth at half maximum. The more helium rich gas mixtures give greater tunability when cavity losses are small and less tunability when cavity losses are large. The role of the various gases in the waveguide CO2 laser is the same as that in conventional devices, by contrast with conventional lasers, the waveguide laser transition is homogeneously broadened. The dependence of gain on gas pressure and other kinetic and discharge properties differs substantially from that predicted by scaling results from conventional low pressure lasers.

Cohen, S. C.↗

Vibrational spectrum of CO2/-/ in an argon matrix

Ar:CO:N2O samples of mole ratio 250:1:1 and 500:1:1 were codeposited at 14 K with an atomic beam of sodium or potassium. The infrared spectrum of the resulting deposit was basically identical to that for CO and N2O isolated in an argon matrix in the absence of alkali metal atoms. Spectral absorption features were studied of Ar:CO2 samples of mole ratio ranging from 250 to 500 codeposited with an atomic beam of potassium. Ar:CO2 samples with a mole ratio in the range from 250 to 1000, which had been codeposited with an atomic beam of cesium, were also investigated.

Jacox, M. E.↗

Photodissociation quantum yields of CO2 between 1200 and 1500 A

Measurements of the photodissociation quantum yields of CO2 have been carried out using various atomic line sources between 1200 and 1500 A. The production of CO was monitored by resonance fluorescence, and the results indicate that where the CO2 absorption spectrum is continuous, the CO quantum yield is high, but where there is structure, the yield is low.

Slanger, T. G.↗

Semiperiodic variations in CO2 abundance on Venus

Tests of the uniqueness of periodicity in the strength of the P branch (P2-P38) of the 8689 A CO2 band on Venus are described. It was found that the observed 4-day periodicity was not unique. The periodicity indicated an increasing asymmetry between the northern and southern hemispheres with approach to inferior conjunction or with increasing phase angle. When the slit positions of the various scans were referred to the planet or atmospheric equator rather than to the intensity equator, at inferior conjunction, the slit positions having a factor of two greater CO2 abundance or line strength were over the polar latitudes of the atmosphere. Similarly, the lower-abundance slit positions were over the equatorial latitudes of the atmosphere. It is thus concluded that the level of line formation must be lower over polar latitudes than over equatorial regions.

Barker, E. S.↗

Effective mie-scattering and CO2 absorption in the dust-laden Martian atmosphere and its impact on radiative-convective temperature changes in the lower scale heights

A time dependent computer model of radiative-convective-conductive heat transfer in the Martian ground-atmosphere system was refined by incorporating an intermediate line strength CO2 band absorption which together with the strong-and weak-line approximation closely simulated the radiative transmission through a vertically inhomogeneous stratification. About 33,000 CO2 lines were processed to cover the spectral range of solar and planetary radiation. Absorption by silicate dust particulates, was taken into consideration to study its impact on the ground-atmosphere temperature field as a function of time. This model was subsequently attuned to IRIS, IR-radiometric and S-band occultation data. Satisfactory simulations of the measured IRIS spectra were accomplished for the dust-free condition. In the case of variable dust loads, the simulations were sufficiently fair so that some inferences into the effect of dust on temperature were justified.

Pallmann, A. J.↗

Graphite and ablative material response to CO2 laser, carbon-arc, and xenon-arc radiation

The behavior was investigated of graphite and several charring ablators in a variety of high-radiative heat-flux environments. A commercial-grade graphite and nine state-of-the-art charring ablators were subjected to various radiative environments produced by a CO2 laser and a carbon arc. Graphite was also tested in xenon-arc radiation. Heat-flux levels ranged from 10 to 47 MW/sq m. Tests were conducted in air, nitrogen, helium, and a CO2-N2 mixture which simulated the Venus atmosphere. The experimental results were compared with theoretical results obtained with a one-dimensional charring-ablator analysis and a two-dimensional subliming-ablator analysis. Neither the graphite nor the charring ablators showed significant differences in appearance or microstructure after testing in the different radiative environments. The performance of phenolic nylon and graphite was predicted satisfactorily with existing analyses and published material property data. Good agreement between experimental and analytical results was obtained by using sublimation parameters from a chemical nonequilibrium analysis of graphite sublimation. Some charring ablators performed reasonably well and could withstand radiative fluxes of the level encountered in certain planetary entries. Other materials showed excessive surface recession and/or large amounts of cracking and spalling, and appear to be unsuitable for severe radiative environments.

Brewer, W. D.↗

CO/d-3 Delta sub i to X-1 Sigma +/ fluorescence from photodissociation of CO2 by 923 A photons

Measurements of vacuum ultraviolet fluorescence from the photodissociation of CO2 by photons from a N IV line emission source at a wavelength of 923 A have revealed a second CO band system in addition to the expected emission bands. Spectra with time resolution were obtained and the fluorescence lifetime and the dependence of fluorescence intensity on CO2 pressure were measured. An analysis of this data has permitted the second band system to be identified as originating from CO(d-3 Delta sub i to X-1 Sigma +) transitions.

Phillips, E.↗

A mature Bosch CO2 reduction technology

The reduction of CO2 is one of the steps in closing the oxygen loop for long-duration manned space missions. Several units utilizing the Bosch process, which catalytically reduces CO2 with hydrogen, have been built and operated during the past decade. Each contributed substantial information affecting subsequent designs. Early challenges were primarily concerned with carbon control, materials durability, and reliability of reaction initiation. These were followed by concern about power consumption, expendable weight, volume, and process rate control. Suitable materials and techniques for carbon containment and process reliability have been demonstrated. Power requirements have been reduced by almost an order of magnitude. Methods for significant reductions in expendable weight and volume have been developed. The technology is at a state of maturity directly applicable to designs for space missions.

King, C. D.↗

Infrared heterodyne spectroscopy of CO2 in the atmosphere of Mars

An infrared heterodyne spectrometer with a resolving power of 6 million has been used to obtain detailed profiles of the 10-micron absorption lines of CO2 in the atmosphere of Mars. An analysis of the results with an empirical model-atmosphere calculation indicates a nearly pure CO2 atmosphere with an average surface pressure of 5.2 + or - 0.5 mbar in the observed regions, a subsolar surface temperature near 275 K, an atmospheric temperature of 235 to 240 K above the subsolar point, and a lapse rate of 2 K/km.

Betz, A. L.↗

Life problems of small CO2 waveguide lasers

Gas discharge tube results, using the cathode technology developed for the ordinary one watt CW CO2 laser, promise life of at least a few thousand hours for the longitudinally excited waveguide laser. Actual lasers still suffer from excessive cathode sputtering, mirror deposits, and cathode flickering. The present state of this technology offers no easy solutions to extend the life of the transversely excited, pulsed CO2 waveguide laser.

Hochuli, U. E.↗