Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “beams”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Radiation resistance of a baffled beam.

The radiation resistance of a beam is theoretically determined from the total acoustic power radiated into the farfield. The beam is supported in an infinite baffle, with both hinged and clamped supports considered. Asymptotic solutions are derived for frequencies well below the critical frequency. Curves, covering the entire frequency range between the low- and high-frequency asymptotic solutions, are obtained through numerical integration for the first ten modes of beams with various width-to-length ratios. For frequencies well below the critical frequency, the ratio of the radiation resistance of a beam clamped at each end to that of a beam hinged at each end is 0.851 for the first mode, 0.711 for the second mode, and asymptotically approaches 2 as the mode number tends to infinity. For both hinged and clamped supports, the radiation resistance of all modes increases with the beam width-to-length ratio.

Wallace, C. E.↗
NASA NTRS1973

Neutral beam dose and sputtering characteristics in an ion implantation system

A technique and instrument design for calorimetric detection of the neutral atom content of a 60 keV argon ion beam. A beam sampling method is used to measure local heat flux to a small platinum wire at steady state; integration of power density profiles leads to a determination of equivalent neutral beam current. The fast neutral production occurs as a result of charge transfer processes in the region of the beam system between analyzing magnet and beam stop where the pressure remains less than .00001 torr. A description of the neutral beam detector is given in section along with a presentation of results. An elementary analysis of sputter material transport from target to substrate was performed; the analysis relates to semiconductor sputtering.

Roberts, A. S., Jr.↗
NASA NTRS1973

Depolarization of an uncollimated laser beam in a turbulent medium

The depolarization of a beam wave, with Gaussian intensity distribution and arbitrary divergence, propagating in a turbulent medium is considered. The correlation function of the depolarized component of the beam is determined. The mean-square depolarization fluctuation is then determined for a medium characterized by a Kolmogorov spectrum. If the beam is assumed to be collimated, this expression reduces to that of Collett and Alferness; if the plane-wave limiting case of the Gaussian beam is taken, the results in this paper agree with those of Strohbehn. The results show that off the beam axis the depolarization can be greater than for the plane wave, and that near the beam focal point the depolarization may decrease by orders of magnitude.

Chang, F. C.↗
NASA NTRS1974

Heavy ion beam probe measurements of radial potential profiles in the modified Penning discharge

A heavy ion beam probe was used to examine the radial potential profile of a plasma in the modified Penning discharge. The plasma has strong (approximately kV) electrostatic potentials near the anode ring which can be a large fraction of the injected ion beam energy. A primary (singly ionized) thallium ion beam is injected through the plasma in the midplane of a double Penning anode ring. After passage through the plasma, primary and secondary (doubly ionized) ions are detected with either a set of flat probes or an electrostatic energy analyzer. A calculation of the primary orbit through the plasma is performed to obtain an approximation to the measured primary beam trajectory. As the real radial potential profile is unknown, an adjustable model is used in the computer program. The adjustable potential profile is varied until the best agreement between measured and calculated trajectories is obtained. Secondary orbits are also predicted using the best fitting adjustable profile. The calculations indicate that secondary beams originating at more than one point in the plasma can be simultaneously observed at the electrostatic analyzer with certain primary beam initial conditions.

Kambic, G. X.↗
NASA NTRS1975

Buckling of continuously supported hinged beams

The effect on the buckling load of a hinge at the center of an infinite beam supported by a semiinfinite elastic continuum is analyzed using the complex Fourier transforms. An expression is obtained for the relationship between the surface deflection of the elastic continuum and the pressure distribution acting on the surface, and solutions are obtained for the assumed form of the pressure distribution below the beam. The analysis is applied to cases of uniform pressure over the width of the beam and a pressure distribution that occurs below a rigid stamp. The results show that the buckling loads for an infinite beam with a hinge at the center and supported by a semiinfinite elastic continuum are approximately one half of those for a beam without a hinge, and that this ratio is exactly one half for an infinite beam resting on a Winkler foundation.

Murthy, G. K. N.↗
NASA NTRS1975

Experimental observation of the ion-ion beam instability in a cylindrical geometry

The ion-ion beam instability is investigated in a cylindrical geometry. In the presence of a cylindrically symmetric ion beam a coherent ion-ion beam instability is observed for a well-defined range of beam velocity. This instability gives rise to cylindrical standing waves whose frequency depends upon beam velocity. The beam distribution function is measured to be a ring in velocity space. The dispersion relation appropriate for the cylindrical standing waves is solved numerically and is shown to be in good agreement with the experimentally observed instability.

Romesser, T.↗
NASA NTRS1976

Sound radiation from randomly vibrating beams of finite circular cross section

The radiation of sound from vibrating cylindrical beams is analyzed based on the frequency of the beam vibrations and the physical characteristics of the beam and its surroundings. A statistical analysis of random beam vibrations allows this result to be independent of the boundary conditions at the ends of the beam. The acoustic power radiated by the beam can be determined from a knowledge of the frequency band vibration data without a knowledge of the individual modal vibration amplitudes. A practical example of the usefulness of this technique is provided by the application of the theoretical calculations to the prediction of the octave band acoustic power output of the picking sticks of an automatic textile loom. Calculations are made of the expected octave band sound pressure levels based on measured acceleration data. These theoretical levels are subsequently compared with actual sound pressure level measurements of loom noise.

Sutterlin, M. W.↗
NASA NTRS1976

Nonpropulsive applications of ion beams

Eight centimeter ion beam sources utilizing xenon and argon have been developed that operate over a wide range of beam energies and currents. Three types of processes have been studied: sputter deposition, ion beam machining, and ion beam surface texturing. The broad range of source operating conditions allows optimum sputter deposition of various materials. An ion beam source was used to ion mill laser reflection holograms using photoresist patterns on silicon. Ion beam texturing was tried with many materials and has a multitude of potential applications.

Hudson, W. R.↗
NASA NTRS1977

A heavy ion beam probe system for investigation of a modified Penning discharge

An ion beam probe diagnostic system can measure time- and space-resolved profiles of plasma space potential and electron density. In combination with a computer iterative technique, the ion beam probe can determine both the space potential profile in plasmas containing strong electric fields and potentials comparable in magnitude to the energy of the probing ion beam. During ion beam probing of a modified Penning discharge, several groups of secondary ions were observed coming from the plasma with a fixed primary beam energy and momentum. The energies of these ions were within 10 percent of the values predicted by a computer-generated model of the potential profile in the plasma. The mechanical and electronic components of the system are described, with particular emphasis on those features required to probe plasma potentials comparable in magnitude to the ion beam energy.

Kambic, G. X.↗
NASA NTRS1976

Nonpropulsive applications of ion beams

This paper describes the results of an investigation of the nonpropulsive applications of electric propulsion technology. Eight centimeter ion beam sources utilizing xenon and argon have been developed that operate over a wide range of beam energies and currents. Three types of processes have been studied - sputter deposition, ion beam machining, and ion beam surface texturing. The broad range of source operating conditions allows optimum sputter deposition of various materials. An ion beam source has also been used to ion mill laser reflection holograms using photoresist patterns on silicon. Ion beam texturing has been tried with many materials and has a multitude of potential applications.

Hudson, W. R.↗
NASA NTRS1976

Measurements on wave propagation characteristics of spiraling electron beams

Dispersion characteristics of cyclotron-harmonic waves propagating on a neutralized spiraling electron beam immersed in a uniform axial magnetic field are studied experimentally. The experimental setup consisted of a vacuum system, an electron-gun corkscrew assembly which produces a 110-eV beam with the desired delta-function velocity distribution, a measurement region where a microwave signal is injected onto the beam to measure wavelengths, and a velocity analyzer for measuring the axial electron velocity. Results of wavelength measurements made at beam currents of 0.15, 1.0, and 2.0 mA are compared with calculated values, and undesirable effects produced by increasing the beam current are discussed. It is concluded that a suitable electron beam for studies of cyclotron-harmonic waves can be generated by the corkscrew device.

Singh, A.↗
NASA NTRS1978

Propagation of a laser beam in a time-varying waveguide

The propagation of an axisymmetric laser beam in a plasma column having a radially parabolic electron density distribution is reported. For the case of an axially uniform waveguide it is found that the basic characteristics of alternating focusing and defocusing beams are maintained. However, the intensity distribution is changed at the foci and outer-beam regions. The features of paraxial beam propagation are discussed with reference to axially varying waveguides. Laser plasma coupling is considered noting the case where laser heating produces a density distribution radially parabolic near the axis and the energy absorbed over the focal length of the plasma is small. It is found that: (1) beam-propagation stability is governed by the relative magnitude of the density fluctuations existing in the axial variation of the waveguides due to laser heating, and (2) for beam propagation in a time-varying waveguide, the global instability of the propagation is a function of the initial fluctuation growth rate as compared to the initial time rate of change in the radial curvature of the waveguide.

Chapman, J. M.↗
NASA NTRS1979

Solar Power Satellite (SPS) pilot beam and communication link subsystem investigation study, phase 1

A preliminary engineering model of ionospheric interactions with the pilot beam was established and used to demonstrate that the dual frequency baseline pilot beam system might not be viable in the presence of an unstable transmission path. Alternate approaches to remove this difficulty are described. Although ionospheric fluctuations will not significantly degrade beam pointing or raise the sidelobe levels, they will reduce transmission efficiency by upwards of 25%. Mitigating strategies to substantially reduce this effect are proposed. Based on the Klystron noise spectrum, the pilot beam transmitter power was determined as a function of frequency offset from the power beam carrier frequency. The RFI from the pilot beam, on the ground and at geosynchronous orbit is shown. Noise levels on the earth's surface due to the SPS are presented as a function of frequency and the number of SPS systems. Analysis of the communication subsystem indicates that a standard telemetry line of 1.544 MB/s would satisfy both voice and data link requirements. Additional links would be required for TV and radio transmissions.

Source record↗
NASA NTRS1980

Observations of waves artificially stimulated by an electron beam inside a region with auroral precipitation

Observations of waves stimulated by artificial injection inside an auroral arc by an electron accelerator mounted on the POLAR 5 sounding rocket are presented. The accelerator produced a pulsed electron beam with currents up to 130 mA and energies up to 10 keV; emissions after the end of beam injection were generated by perturbations in the ambient plasma near the accelerator during beam injection. These emissions were independent of the electron beam direction along the geomagnetic field. The high frequency emission observed after beam injection correlated with the passage through an auroral arc; the low frequency emissions after beam injection were concentrated in two bands below the lower hybrid frequency.

Grandal, B.↗
NASA NTRS1981

Electron beam induced damage in ITO coated Kapton

Data for the stability of thin conductive indium tin oxide films on 0.003 inch thick Kapton substrates during exposure of the surface to electron beams are reported. The electron beam energy was 3 keV and the diameter was about 0.8 mm. Thermal effects and surface modifications are considered. For primary current greater than 0.6 microamperes, an obvious dark discoloration with diameter approximately that of the beam was produced. The structure of the discolored region was studied with the scanning electron microscope, and the findings are stated. Surface modifications were explored by AES, obtaining spectra and secondary emission coefficient as a function of time for different beam intensities. In all cases beam exposure results in a decrease of the secondary yield but because of thermal effects this change, as well as composition changes, cannot be directly interpreted in terms of electron beam dosage.

Krainsky, I.↗
NASA NTRS1982

Suprathermal electrons produced by beam-plasma-discharge

Experiments conducted with a low energy plasma lens, HARP, in the electron beam of the large vacuum chamber at Johnson Space Center indicate that an enhanced population of 50 to 300 volt electrons appear when the beam goes into the Beam-Plasma Discharge (BPD) mode. Below the BPD instability the electron distribution appears to be characterized as non-energized single particle scattering and energy loss. At 100 cm from the beam core in the BPD mode the fluxes parallel to the beam are reduced by a factor of 20 with respect to the fluxes at 25 cm. Some evidence for isotropy near the beam core is presented.

Sharp, W. E.↗
NASA NTRS1983

A perpendicular ion beam instability - Solutions to the linear dispersion relation

A 200-eV Xe(+) ion beam directed perpendicular to the terrestrial magnetic field in the F region ionosphere produced very narrow band electrostatic emissions just above multiples of the hydrogen cyclotron frequency. Although the plasma conditions associated with the ion beam were undoubtedly very complex, a simple ion beam in a background ionosphere is considered first. The dispersion relation for flute mode waves and an unmagnetized perpendicular ion beam is solved for a diffuse H(+) plasma and then for a combination of dense O(+) and diffuse H(+). These solutions account for most of the wave properties, including the observation of narrow spectral peaks separated by the hydrogen cyclotron frequency and the observation of no spectral peaks below 2000 Hz. We cannot dismiss field-aligned currents associated with the Xe(+) beam as an alternate source of free energy for the narrow band emissions. However, our intention here is to examine closely the Xe(+) beam as a source for directly exciting the plasma waves.

Kintner, P. M.↗
NASA NTRS1983

Measurements of the stability of energetic electron beams in the ionosphere

An electron gun carried in the main payload of a rocket launched on December 3, 1979 into a bright, east-west oriented auroral arc produced a pulsed electron beam in a programed format. Charged particle observations from the flight are used to define the spatial distribution of perturbed volume surrounding the accelerator during gun firing, determining that perturbation radial dimensions scale with the primary electron beam gyroradius and current and are dependent on beam injection angle. The intense flux of low energy electrons observed on field lines near the rocket are shown to be accelerated ambients, while particles at or near the beam energy and at large radial distances are presumably beam primaries. Results from this flight are compared with those from large vacuum tank simulations, and it is concluded that certain features of the data are consistent with the beam-plasma instability observed in the laboratory.

Duprat, G. R. J.↗