Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “balancing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Greenhouse gas balance over thaw-freeze cycles in discontinuous zone permafrost

Peat in the discontinuous permafrost zone contains a globally significant reservoir of carbon that has undergone multiple permafrost-thaw cycles since the end of the mid-Holocene (~3700 years before present). Periods of thaw increase C decomposition rates which leads to the release of CO 2 and CH 4 to the atmosphere creating potential climate feedback. In this paper, to determine the magnitude and direction of such feedback, we measured CO 2 and CH 4 emissions and modeled C accumulation rates and radiative fluxes from measurements of two radioactive tracers with differing lifetimes to describe the C balance of the peatland over multiple permafrost-thaw cycles since the initiation of permafrost at the site. At thaw features, the balance between increased primary production and higher CH 4 emission stimulated by warmer temperatures and wetter conditions favors C sequestration and enhanced peat accumulation. Flux measurements suggest that frozen plateaus may intermittently (order of years to decades) act as CO 2 sources depending on temperature and net ecosystem respiration rates, but modeling results suggest that—despite brief periods of net C loss to the atmosphere at the initiation of thaw—integrated over millennia, these sites have acted as net C sinks via peat accumulation. In greenhouse gas terms, the transition from frozen permafrost to thawed wetland is accompanied by increasing CO 2 uptake that is partially offset by increasing CH 4 emissions. Finally, in the short-term (decadal time scale) the net effect of this transition is likely enhanced warming via increased radiative C emissions, while in the long-term (centuries) net C deposition provides a negative feedback to climate warming.

54 ENVIRONMENTAL SCIENCES↗

A least-squares finite element method based on the Helmholtz decomposition for hyperbolic balance laws

In this paper, a least-squares finite element method for scalar nonlinear hyperbolic balance laws is proposed and studied. The approach is based on a formulation that utilizes an appropriate Helmholtz decomposition of the flux vector and is related to the standard notion of a weak solution. This relationship, together with a corresponding connection to negative-norm least-squares, is described in detail. As a consequence, an important numerical conservation theorem is obtained, similar to the famous Lax–Wendroff theorem. The numerical conservation properties of the method in this paper do not fall precisely in the framework introduced by Lax and Wendroff, but they are similar in spirit as they guarantee that when L 2 convergence holds, the resulting approximations approach a weak solution to the hyperbolic problem. The least-squares functional is continuous and coercive in an H -1 -type norm, but not L 2 -coercive. Nevertheless, the L 2 convergence properties of the method are discussed. Convergence can be obtained either by an explicit regularization of the functional, that provides control of the L 2 norm, or by properly choosing the finite element spaces, providing implicit control of the L 2 norm. Numerical results for the inviscid Burgers equation with discontinuous source terms are shown, demonstrating the L 2 convergence of the obtained approximations to the physically admissible solution. The numerical method utilizes a least-squares functional, minimized on finite element spaces, and a Gauss–Newton technique with nested iteration. Finally, we believe that the linear systems encountered with this formulation are amenable to multigrid techniques and combining the method with adaptive mesh refinement would make this approach an efficient tool for solving balance laws (this is the focus of a future study).

97 MATHEMATICS AND COMPUTING↗

Limited range spatial load balancing in non-convex environments using sampling-based motion planners

This paper analyzes the limited range, spatial load balancing problem for agents deployed in non-convex environments and subject to differential constraints which restricts how the agents can move. First, the (unlimited range) spatial load balancing problem is introduced and the minimization problem with area constraints is defined. Then, to extend the problem for limited ranges, two cost functions and a sub-partition are defined. The problems are then analyzed and the results prove the existence of a partition that satisfies the area constraints. The non-convex environment makes the problem difficult to solve in continuous-space. Therefore, a probabilistic roadmap is used to approximate agents’ cells via a graph. A distributed algorithm is proven to converge to an approximate solution. Lastly, the convergence of the algorithm is shown in simulation.

42 ENGINEERING↗

A Framework to Analyze the Performance of Load Balancing Schemes for Ensembles of Stochastic Simulations

Ensembles of simulations are employed to estimate the statistics of possible future states of a system, and are widely used in important applications such as climate change and biological modeling. Ensembles of runs can naturally be executed in parallel. However, when the CPU times of individual simulations vary considerably, a simple strategy of assigning an equal number of tasks per processor can lead to serious work imbalances and low parallel efficiency. This paper presents a new probabilistic framework to analyze the performance of dynamic load balancing algorithms for ensembles of simulations where many tasks are mapped onto each processor, and where the individual compute times vary considerably among tasks. Four load balancing strategies are discussed: most-dividing, all-redistribution, random-polling, and neighbor-redistribution. Simulation results with a stochastic budding yeast cell cycle model are consistent with the theoretical analysis. It is especially significant that there is a provable global decrease in load imbalance for the local rebalancing algorithms due to scalability concerns for the global rebalancing algorithms. The overall simulation time is reduced by up to 25 %, and the total processor idle time by 85 %.

ALGORITHMS↗

Advanced mass balance characterization and fractionation of algal biomass composition

Abstract Opportunities associated with biomass production and bioproduct isolation from algae-derived feedstocks are plentiful and promising; however, there are challenges associated with realizing these applications. One of the most important, and often overlooked, challenges is the lack of availability of a strong foundation of compositional analysis methods validated on microalgal biomass. Currently, compositional analysis in algae is dominated by the use of interference-prone methods, a lack of full mass balance accounting, and the use of top-down approaches that bin all unaccounted-for mass into a single category, such as carbohydrates. We present here an approach based on a bottom-up algal biomass characterization aimed at moving towards, and highlighting the importance of, full and accurate mass closure to achieve the maximum economic potential from a sustainable and renewable feedstock. Algal biomass representing three genera, Nannochloropsis , Scenedesmus , and Monoraphidium , was subjected to a cell rupture and fractionation process, followed by detailed characterization of each fraction to determine the partitioning of measured and unknown components. The goal of this work is to identify where the missing components partition, and develop a strategy to close the mass balance or identify the unknowns, while utilizing a rigorous characterization approach for characterizing algal biomass. Although only 75–80% of the biomass was accounted for, the fractionation approach utilized here provides key insight into possible chemical components for future investigations.

59 BASIC BIOLOGICAL SCIENCES↗

Large-scale harmonic balance simulations with Krylov subspace and preconditioner recycling

The multi-harmonic balance method combined with numerical continuation provides an efficient framework to compute a family of time-periodic solutions, or response curves, for large-scale, nonlinear mechanical systems. The predictor and corrector steps repeatedly solve a sequence of linear systems that scale by the model size and number of harmonics in the assumed Fourier series approximation. In this paper, a novel Newton–Krylov iterative method is embedded within the multi-harmonic balance and continuation algorithm to efficiently compute the approximate solutions from the sequence of linear systems that arise during the prediction and correction steps. Further, the method recycles, or reuses, both the preconditioner and the Krylov subspace generated by previous linear systems in the solution sequence. A delayed frequency preconditioner refactorizes the preconditioner only when the performance of the iterative solver deteriorates. The GCRO-DR iterative solver recycles a subset of harmonic Ritz vectors to initialize the solution subspace for the next linear system in the sequence. The performance of the iterative solver is demonstrated on two exemplars with contact-type nonlinearities and benchmarked against a direct solver with traditional Newton–Raphson iterations.

97 MATHEMATICS AND COMPUTING↗

Balanced k -means clustering on an adiabatic quantum computer

Adiabatic quantum computers are a promising platform for efficiently solving challenging optimization problems. Therefore, many are interested in using these computers to train computationally expensive machine learning models. We present a quantum approach to solving the balanced k-means clustering training problem on the D-Wave 2000Q adiabatic quantum computer. In order to do this, we formulate the training problem as a quadratic unconstrained binary optimization (QUBO) problem. Unlike existing classical algorithms, our QUBO formulation targets the global solution to the balanced k-means model. We test our approach on a number of small problems and observe that despite the theoretical benefits of the QUBO formulation, the clustering solution obtained by a modern quantum computer is usually inferior to the solution obtained by the best classical clustering algorithms. Nevertheless, the solutions provided by the quantum computer do exhibit some promising characteristics. We also perform a scalability study to estimate the run time of our approach on large problems using future quantum hardware. Finally, as a final proof of concept, we used the quantum approach to cluster random subsets of the Iris benchmark data set.

97 MATHEMATICS AND COMPUTING↗

Electrochemical Properties of Commercially Pure Ti with TiB/TiB{sub 2} Coatings in Hanks’ Balanced Salt Solution

In this study, in order to evaluate the electrochemical performance of different titanium boride coatings created on the commercially pure titanium (CP-Ti), distinct electrochemical assays in Hanks’ balanced salt solution at 37 °C were conducted using pack cementation method. The results showed that the boriding at 900 and 1000 °C for 3 h creates the TiB whiskers and TiB whiskers/TiB{sub 2} dense layer on the top of the commercially pure titanium surface, respectively. It was also found that not only borides coating had good adhesion on the substrate, but also that improved the titanium hardness more than five times. Polarization plots clarified the passive behavior of borided specimens. Impedance spectroscopy tests indicated the acceptable corrosion behavior of the borided specimens in Hanks’ balanced salt solution. Mott–Schottky measurements indicated that the passive layers formed on the commercially pure titanium and the borided specimens had doped n-type semiconductor properties. Mott–Schottky measurements displayed that the donor density of the passive layers decreased with the rising time as well. Finally, because of better surface conditions to make a less defective and more protective passive layer, the borided specimen at 900 °C in comparison with the borided specimen at 1000 °C was shown to be the more suitable choice for bioimplant applications.

36 MATERIALS SCIENCE↗

Balance of oxygen throughout the conversion of a high-level waste melter feed to glass

Gases evolve from nuclear waste melter feed during conversion to glass in response to heating. This article is focused on oxygen mass balance based on the stoichiometry of feed melting reactions and evolved-gas analysis data. Whereas O 2 -producing and -consuming batch-melting reactions are complete in the reacting and primary-foam layers of the cold cap, O 2 from redox reactions continues to evolve as long as melt temperature increases, and thus generates secondary foam. Also, we discuss the relationship between the oxygen mass balance and the temperature-dependent iron redox ratio and the O 2 partial pressure, as they evolve during the feed-to-glass conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic load balancing algorithm for molecular dynamics based on Voronoi cells domain decompositions

We present a new algorithm for automatic parallel load balancing in classical molecular dynamics. It assumes a spatial domain decomposition of particles into Voronoi cells. It is a gradient method which attempts to minimize a cost function by displacing Voronoi sites associated with each processor/sub-domain along steepest descent directions. Excellent load balance has been obtained for quasi-2D and 3D practical applications, with up to 440·10 6 particles on 65,536 MPI tasks.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Using X-ray radiography to study oxygen flow in a proton exchange membrane electrolyzer operating under balanced pressure conditions

Of the various water electrolyzer technologies, the proton exchange membrane electrolyzer (PEMWE) is one of the best solutions for producing clean hydrogen without releasing CO 2 . In order to allow for widespread use of clean hydrogen, it is necessary to decrease its cost, which is intrinsically related to system operation. Current PEMWE plants operate in differential mode, directly pressurizing hydrogen and benefiting from thermodynamic compression, which increases overall system efficiency. However, high differential pressure above 30 bar can cause membrane stress, resulting in membrane creeping and failure. Pressurizing the water and operating at balanced pressure allows hydrogen to be produced at higher pressures while preserving the integrity of the membrane and porous layers. Nevertheless, the impact of pressurizing water on PEMWE performance must be better understood to maximize performance under balanced pressure conditions. Here, this study examined the impact of water pressure on two-phase flow. A high-pressure electrolyzer setup was developed to perform operando X-ray radiography and examine oxygen transport with high temporal resolution. The imaging segmentation process, developed to capture bubble properties in the channel, was applied to a specific experiment. The results clearly showed that as pressure increased up to 30 bars, the initial bubbly flow transitioned to slug flow, which led to channel saturation with oxygen. This work demonstrates that two-phase flow in an electrolyzer can be studied using X-ray radiography, which has the advantages of fast measurements and the ability to probe dense materials, such as those required for pressurized electrolyzers.

Balanced high pressure operation↗

Evaluation of the energy balance of chemical looping combustion of solid fuels using CuO-based oxygen carriers

Chemical looping combustion (CLC) can inherently capture the CO2 generated during thermal energy production. When using CuO-based oxygen carriers, the reactions in both the fuel reactor (FR) and air reactor (AR) are exothermic, facilitating autothermal operation. To prevent the oxygen carrier from becoming agglomerated while ensuring a sufficient oxygen release rate, it is necessary to predict the FR temperature and remove an appropriate amount of heat from the AR when burning high-rank fuels. Here in this work, the energy balance of a CuO-based CLC system firing various solid fuels (biomass, coal, and petroleum coke) was investigated by establishing a thermodynamic model using FactSage. The energy distribution characteristics of the FR were quantified based on a virtual five-step thermodynamic sequence. The effects of fuel properties, oxygen carrier properties, and operating conditions on the energy balance were evaluated systematically. The results indicate that the temperature difference between the FR and AR is not very sensitive to the heating value of the fuel, while the CuO loading of the oxygen carrier, the heat capacity of the support material, and the flow rate of the fluidizing gas have significant impact. The insights obtained in this work will help improve the design and heat management of CLC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Locality-aware and load-balanced static task scheduling for MapReduce

Task scheduling for MapReduce jobs has been an active area of research with the objective of decreasing the amount of data transferred during the shuffle phase via exploiting data locality. In the literature, generally only the scheduling of reduce tasks is considered with the assumption that scheduling of map tasks is already determined by the input data placement. However, in cloud or HPC deployments of MapReduce, the input data is located in a remote storage and scheduling map tasks gains importance. Here, we propose models for simultaneous scheduling of map and reduce tasks in order to improve data locality and balance the processors’ loads in both map and reduce phases. Our approach is based on graph and hypergraph models which correctly encode the interactions between map and reduce tasks. Partitions produced by these models are decoded to schedule map and reduce tasks. A two-constraint formulation utilized in these models enables balancing processors’ loads in both map and reduce phases. The partitioning objective in the hypergraph models correctly encapsulates the minimization of data transfer when a local combine step is performed prior to shuffle, whereas the partitioning objective in the graph models achieve the same feat when a local combine is not performed. Here, we show the validity of our scheduling on the MapReduce parallelizations of two important kernel operations – sparse matrix–vector multiplication (SpMV) and generalized sparse matrix–matrix multiplication (SpGEMM) – that are widely encountered in big data analytics and scientific computations. Compared to random scheduling, our models lead to tremendous savings in data transfer by reducing data traffic from several hundreds of megabytes to just a few megabytes in the shuffle phase and consequently leading up to 2.6x and 4.2x speedup for SpMV and SpGEMM, respectively.

97 MATHEMATICS AND COMPUTING↗

Numerical study of a stochastic particle algorithm solving a multidimensional population balance model for high shear granulation

This paper is concerned with computational aspects of a multidimensional population balance model of a wet granulation process. Wet granulation is a manufacturing method to form composite particles, granules, from small particles and binders. A detailed numerical study of a stochastic particle algorithm for the solution of a five-dimensional population balance model for wet granulation is presented. Each particle consists of two types of solids (containing pores) and of external and internal liquid (located in the pores). Several transformations of particles are considered, including coalescence, compaction and breakage. A convergence study is performed with respect to the parameter that determines the number of numerical particles. Averaged properties of the system are computed. In addition, the ensemble is subdivided into practically relevant size classes and analysed with respect to the amount of mass and the particle porosity in each class. These results illustrate the importance of the multidimensional approach. Finally, the kinetic equation corresponding to the stochastic model is discussed.

97 MATHEMATICS AND COMPUTING↗

Self-adaptive weights based on balanced residual decay rate for physics-informed neural networks and deep operator networks

Physics-informed deep learning has emerged as a promising alternative for solving partial differential equations. However, for complex problems, training these networks can still be challenging, often resulting in unsatisfactory accuracy and efficiency. In this work, we demonstrate that the failure of plain physics-informed neural networks arises from the significant discrepancy in the convergence rate of residuals at different training points, where the slowest convergence rate dominates the overall solution convergence. Based on these observations, we propose a pointwise adaptive weighting method that balances the residual decay rate across different training points. The performance of our proposed adaptive weighting method is compared with current state-of-the-art adaptive weighting methods on benchmark problems for both physics-informed neural networks and physics-informed deep operator networks. In conclusion, through extensive numerical results we demonstrate that our proposed approach of balanced residual decay rates offers several advantages, including bounded weights, high prediction accuracy, fast convergence rate, low training uncertainty, low computational cost, and ease of hyperparameter tuning.

Balanced convergence rate↗

Variations in annual water-energy balance and their correlations with vegetation and soil moisture dynamics: A case study in the Wei River Basin, China

It is of importance to investigate watershed water-energy balance variations and to explore their correlations with vegetation and soil moisture dynamics, which helps better understand the interplays between underlying surface dynamics and the terrestrial water cycle. The heuristic segmentation method was adopted to identify change points in the parameter to series in Fu's equation belonging to the Budyko framework in the Wei River Basin (WRB) and its sub-basins aiming to examine the validity of stationary assumptions. Additionally, the cross wavelet analysis was applied to explore the correlations between vegetation and soil moisture dynamics and to variations. Results indicated that (1) the omega variations in the WRB are significant, with some change points identified except for the sub-basin above Zhangjiashan, implying that the stationarity of omega series in the WRB is invalid except for the sub-basin above Zhangjiashan; (2) the correlations between soil moisture series and to series are weaker than those between Normalized Difference Vegetation Index (NDVI) series and omega series; (3) vegetation dynamics show significantly negative correlations with omega variations in 1983-2003 with a 4-8 year signal in the whole WRB, and both vegetation and soil moisture dynamics exert strong impacts on the parameter omega changes. This study helps understanding the interactions between underlying land surface dynamics and watershed water-energy balance. (C) 2017 Elsevier B.V. All rights reserved.

54 ENVIRONMENTAL SCIENCES↗

Balance on the charge generation, separation and transfer performance of different TiO{sub 2} nanostructures in quantum dot sensitized solar cells

Graphical abstract: QDSSCs with different structure: (a) J-V curves, (b) TRPL spectra. - Highlights: • Charge generation, separation and transfer performance have been balanced by different structures. • Excellent charge separation and transfer performance have been exhibited for nano-array structure. • Nanotube array structure relative better charge generation, excellent charge separation and transfer performance of QDSSCs. - Abstract: TiO{sub 2} nanoparticle and nano-array structures including nanorods, nanowires and nanotubes are prepared for the photo-electrodes of CuInS{sub 2} quantum dot sensitized solar cells, which are investigated the balance on charge generation, separation and transfer performance in solar cells. The optical absorption properties and PL spectra of different photo-electrodes are investigated, which indicates better charge generation property for nanoparticle structure and better charge separation property for nano-arrays structure. With the grain boundary of nanoparticle films and excellent charge transfer performance of nano-arrays films, higher short-circuit current density value has been performed for all the nano-array structure based solar cells. Due to the relative large surface area of three nano-arrays structure for charge generation, excellent charge separation and transfer performance, the TiO{sub 2} nanotube based CuInS{sub 2} quantum dot sensitized solar cells exhibits greater photovoltaic efficiency than other nanostructures, which can support the progress for further photovoltaic performance enhancement on quantum dot sensitized solar cells.

36 MATERIALS SCIENCE↗

Cost estimation of balance of plant equipment scale up for proton exchange membrane water electrolyzer systems

Water electrolyzers that use electricity to split water into hydrogen and oxygen could be a key technology for increasing hydrogen supply to meet expanded and emerging market applications, although currently the capital costs of these electrolyzers are high. Here we examine cost reductions that might be achieved by scaling up proton exchange membrane (PEM) electrolyzer systems and leveraging economies of scale through balance of plant (BOP) components for system sizes between 1 MW and 1 GW. We estimate BOP equipment capital costs of about $\$$848/kW at 1 MW, potentially decreasing to $\$$87/kW at 1 GW (2022-dollar year basis) with most of the cost reduction happening as systems scale from 1 MW to 100 MW. We find that BOP subsystems hydrogen drying and water knockout benefited the most from economies-of-scale cost reductions, and piping, instrumentation, and housing and power electronics were less impacted. These cost reductions from economies of scale could be more significant than estimated cost reductions from manufacturing scale-up reported in literature. These results add to the knowledge base that could guide optimal system designs that balance process scale-up with plant modularization and numbering-up. We also estimate that scaling up BOP could potentially lower the levelized cost of hydrogen (LCOH) by $\$$1.7-$\$$4.6/kg, depending on the scale-up magnitude and the plant capacity factor.

08 HYDROGEN↗