Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “arrival time”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Shock Tube Radiation Measurements in Nitrogen

Spectrally and spatially resolved radiance has been measured in the Electric Arc Shock Tube (EAST) facility, with the aim of improving fundamental understanding of high enthalpy flows in pure nitrogen. These tests provide data to inform models used for simulations of high speed flight in nitrogen rich atmospheres, such as Earth or Titan. The experiments presented in this paper cover conditions from approximately 6 km/s to 11 km/s at an initial pressure of 0.2 Torr. A wide range of physics, with different degrees of non-equilibrium and nitrogen dissociation, are covered. The EAST data are presented in different formats for analysis and comparisons. These formats include the spectral radiance at equilibrium (where appropriate), the spatial dependence of radiance over defined wavelength ranges and the mean non-equilibrium spectral radiance (the so-called "spectral non-equilibrium metric"). All the information needed to simulate each experimental trace, including free-stream conditions, shock time of arrival (i.e. x-t) relation, and the spectral and spatial resolution functions, are provided. Equilibrium radiation calculations are shown as a reference. It is the intention of this paper to motivate code comparisons benchmarked against this data set.

shock tube↗
NASA NTRS2018

Understanding Extended Projected Profile (EPP) Trajectory Error Using a Medium-Fidelity Aircraft Simulation

A critical component of Trajectory-Based Operations is the ability for a consistent and accurate 4-dimensional trajectory to be shared and synchronized between airborne and ground systems as well as amongst various ground automation systems. The Aeronautical Telecommunication Network—Baseline 2 standard defines the Extended Projected Profile (EPP) trajectory that can be sent via Automatic Dependent Surveillance-Contract from an aircraft to ground automation. The EPP trajectory message contains a representation of the reference trajectory from an aircraft’s Flight Management System (FMS). In this work, a set of scenarios were run in a medium-fidelity aircraft and FMS simulation to perform an initial characterization of EPP trajectory errors under a given set of conditions. The parameters investigated were the route length, route type, wind magnitude error, wind direction error, and with and without a required time-of-arrival constraint.

Guerreiro, Nelson M.↗
NASA NTRS2010

TPSAS-NF1676L-10776-DND

Airborne self-separation (SSEP) among aircraft is proposed as a means for improving air traffic system capacity and safety in the future National Airspace System and for improving the efficiency of flight for all aircraft performing this function. The concept is examined in the U.S. en route domain, in an environment of mixed conventional and SSEP operations. No airspace is set aside for this purpose and the first aircraft equipped to perform the function can receive its benefits. For aircraft operating in the SSEP mode, the Air Navigation Service Provider (ANSP) turns over control and responsibility for all separation tasks to the pilots of SSEP aircraft. This includes separation from all other aircraft, from severe weather hazards and from Special Use Airspace. Connection to the centralized traffic flow management function is retained throughout the flight, however, and compliance with any Required Time of Arrival assignments is maintained. The SSEP function is accomplished in the aircraft through the use of airborne surveillance, data communications and processing equipment, and procedures defined in a new set of operating rules called "Autonomous Flight Rules" (AFR). The technical enablers are Automatic Dependent Surveillance - Broadcast (ADS-B), Traffic Information Service - Broadcast (TIS-B), and Traffic Alert and Collision Avoidance System (TCAS). This briefing presents an overview of the concept.

Frank Bussink↗
NASA NTRSDate not supplied

TPSAS-NF1676L-12439-DND

Goal: Increase aircraft throughput at the runway threshold by controlling the spacing between aircraft to a greater precision than can be accomplished today. APS is a time-based spacing concept, today’s system relies on distance-based spacing. ATC determines a spacing interval between a leading and trailing aircraft, then issues a clearance to the trailing aircraft with that interval. The trailing aircraft performs speed changes during its approach to achieve its assigned time spacing with respect to the leading aircraft at the runway threshold. The first in a chain of aircraft does not have a leading aircraft and is assigned a required time of arrival (RTA) at the runway threshold.

Frederick Wieland↗
NASA NTRS2021

Parametric Study of State-of-Charge for an Electric Aircraft in Urban Air Mobility

The envisioned concept of urban air mobility is anticipated to support passenger transportation, cargo delivery, and emergency services in major metropolitan areas with increasing autonomy levels in the future. Distributed electric propulsion powered electric vertical takeoff and landing aircraft are expected to enable urban air mobility. However, the low specific energy of onboard lithium-ion polymer batteries and wind conditions impose constraints on flight endurance. Therefore, to enable autonomous urban air mobility operations using electric aircraft, one of the critical steps from a safety and efficiency perspective is to understand how various operational and environmental conditions impact the state-of-charge of the onboard lithium-ion polymer batteries. This research performs a parametric study of the state-of-charge for a NASA-proposed conceptual multirotor aircraft flight in the urban environment. The parameters considered for the parametric analysis are cruise airspeed, cruise altitude, climb and descent profiles, wind conditions (wind magnitude, wind direction relative to the route, and wind magnitude uncertainty), and required time of arrival.

Urban Air Mobility↗
NASA NTRS2021

Parametric Study of State of Charge for an Electric Aircraft in Urban Air Mobility

The envisioned concept of urban air mobility is anticipated to support passenger transportation, cargo delivery, and emergency services in major metropolitan areas with increasing autonomy levels in the future. Distributed electric propulsion powered electric vertical takeoff and landing aircraft are expected to enable urban air mobility. However, the low specific energy of onboard lithium-ion polymer batteries and wind conditions impose constraints on flight endurance. Therefore, to enable autonomous urban air mobility operations using electric aircraft, one of the critical steps from a safety and efficiency perspective is to understand how various operational and environmental conditions impact the state-of-charge of the onboard lithium-ion polymer batteries. This research performs a parametric study of the state-of-charge for a NASA-proposed conceptual multirotor aircraft flight in the urban environment. The parameters considered for the parametric analysis are cruise airspeed, cruise altitude, climb and descent profiles, wind conditions (wind magnitude, wind direction relative to the route, and wind magnitude uncertainty), and required time of arrival.

Urban Air Mobility↗
NASA NTRSDate not supplied

Wind-Optimal Cruise Airspeed for a Multirotor Aircraft in Urban Air Mobility

This paper first investigates the effect of wind on the wind-optimal (minimum-energy) cruise airspeed for a NASA-proposed conceptual multirotor aircraft for the urban air mobility environment. Next, energy consumption and flight duration results are compared for flying at the wind-optimal airspeed and best-range airspeed on a great-circle cruise segment under different wind conditions. Finally, the difference in energy consumption when flying to meet the assigned required time of arrival based on actual wind conditions vs. predicted wind conditions are examined and compared for the two airspeed modes (wind-optimal and best-range) for different values of wind magnitude uncertainty. The results show operational benefits of flying at the wind-optimal cruise airspeed compared to the best-range airspeed, especially understrong headwind conditions from both an energy consumption and flight duration perspective.The results also show that flying at wind-optimal airspeed under wind magnitude uncertainty has lower variability and higher predictability of energy consumption than flying at best-range airspeed.

Urban Air Mobility↗
NASA NTRS2021

The NANOGrav 12.5 Year Data Set: Monitoring Interstellar Scattering Delays

We extract interstellar scintillation parameters for pulsars observed by the NANOGrav radio pulsar timing program. Dynamic spectra for the observing epochs of each pulsar were used to obtain estimates of scintillation timescales, scintillation bandwidths, and the corresponding scattering delays using a stretching algorithm to account for frequency-dependent scaling. We were able to measure scintillation bandwidths for 28 pulsars at1500 MHz and 15 pulsars at 820 MHz. We examine scaling behavior for 17 pulsars and find power-law indices ranging from−0.7 to−3.6, though these may be biased shallow due to insufficient frequency resolution at lower frequencies. We were also able to measure scintillation timescales for six pulsars at 1500 MHz and seven pulsars at820 MHz. There is fair agreement between our scattering delay measurements and electron-density model predictions for most pulsars. We derive interstellar scattering-based transverse velocities assuming isotropic scattering and a scattering screen halfway between the pulsar and Earth. We also estimate the location of the scattering screens assuming proper motion and interstellar scattering-derived transverse velocities are equal. We find no correlations between variations in scattering delay and either variations in dispersion measure or flux density. For most pulsars for which scattering delays are measurable, we find that time-of-arrival uncertainties for a given epoch are larger than our scattering delay measurements, indicating that variable scattering delays are currently subdominant in our overall noise budget but are important for achieving precisions of tens of nanoseconds or less.

Jacob E Turner↗
NASA NTRSDate not supplied

Assessing the feasibility of a spaceborne 3D lightning observing concept

The distribution of electrical charge in thunderclouds results from thermodynamic, microphysical, and kinematic processes, which also modulate thunderstorm evolution. It is no surprise that the connection between lightning and these physical processes is so strong that the increase and vertical growth of lightning activity closely follows the vertical growth of the thundercloud, but unraveling these connections is not trivial and requires observations of the three-dimensional (3D) structure of electrical activity in a cloud. Ground-based 3D lightning mapping networks give excellent 3D flash-level detail but are limited to regional coverage. Satellite-based optical lightning mappers give excellent global coverage but are largely limited to 2D summaries of flash rate and radiant intensity, albeit new flash products and stereographic techniques are chipping away this limitation. New observing strategies are needed to expand and diversify the corpus of 3D lightning datasets and motivate studies that unravel connections lightning has with these key physical processes and the surrounding environment. This study examines the feasibility of using a distributed network of orbing satellites with VHF-based lightning detectors to obtain global maps of 3D lightning activity and assess efficacy of this approach for use in a new, small satellite mission concept called CubeSpark. CubeSpark combines new VHF and high-resolution, bispectral optical instruments on a constellation of low-Earth orbiting (LEO) satellites to globally map the 3D electrical structure of thunderstorms and study how it relates to thunderstorm evolution, extreme weather, nitrogen oxide production and distribution, upper atmospheric electrical phenomena, and how 3D flash observations can complement existing satellite-based lightning mappers and improve decision support tools. To locate lightning discharges, CubeSpark seeks to use the VHF time-of-arrival technique, similar to ground-based total lightning mapping networks. The vertical location accuracy of these satellite retrievals will be of poorer quality compared to a ground-based network, which has non-trivial implications for lightning flash reconstruction and lightning-based interpretations of deep convection. We adapt a Lightning Mapping Array (LMA) simulation framework to an orbiting network and use it to address feasibility of 3D lightning detection from space with particular attention to location accuracy of VHF detections of lightning in the vertical. These simulations inform a constellation design study that defines a realistic orbital configuration and depicts the global coverage for CubeSpark. Results indicate that a 3D location accuracy of <1-2 km for each dimension can be achieved across 300-500 km wide swaths, which suggests that CubeSpark can resolve the charge structure of thunderclouds from the tropics to the mid- and high- latitudes.

Lightning↗
NASA NTRSDate not supplied

Ground Winds Experienced by the Space Launch System Rocket on the Pad before the Artemis I Launch

Over the course of the development of the Space Launch System (SLS) human-rated heavy-lift launch vehicle, the magnitude and nature of the ground winds experienced by the rocket and its Mobile Launcher (ML) on Pad 39B at the NASA Kennedy Space Center (KSC) became a more critical environment that required characterization as well as a more accurate prediction of the vehicle and ML response in the form of detailed wind loads. The numerous reasons for the sensitivity of the launch system to these ground winds and the growing importance of high fidelity rollout and launch pad wind loading estimates are discussed in this article. A description of the wind measurement instrumentation at and around the Launch Complex is provided. A methodology is developed to estimate from these raw anemometer measurements the winds experienced by the rocket and mobile launcher on the launch pad, either in real time or during post-processing. An analysis is then performed and documented on the 121 days worth of wind measurements recorded while the SLS vehicle was secured on the pad during various launch attempts and wet dress rehearsals. This included the occurrence of a tropical storm that evolved into a named hurricane by the time it arrived on Cape Canaveral and hit the vehicle while sitting on the launch pad. Plans for further developments to improve on this predictive capability in preparation for Artemis II are also presented.

Jeremy T Pinier↗
NASA NTRSDate not supplied

Ground Winds Experienced by the Space Launch System Rocket on the Pad before the Artemis I Launch

Over the course of the development of the Space Launch System (SLS) human-rated heavy-lift launch vehicle, the magnitude and nature of the ground winds experienced by the rocket and its Mobile Launcher (ML) on Pad 39B at the NASA Kennedy Space Center (KSC) became a more critical environment that required characterization as well as a more accurate prediction of the vehicle and ML response in the form of detailed wind loads. The numerous reasons for the sensitivity of the launch system to these ground winds and the growing importance of high fidelity rollout and launch pad wind loading estimates are discussed in this article. A description of the wind measurement instrumentation at and around the Launch Complex is provided. A methodology is developed to estimate from these raw anemometer measurements the winds experienced by the rocket and mobile launcher on the launch pad, either in real time or during post-processing. An analysis is then performed and documented on the 121 days worth of wind measurements recorded while the SLS vehicle was secured on the pad during various launch attempts and wet dress rehearsals. This included the occurrence of a tropical storm that evolved into a named hurricane by the time it arrived on Cape Canaveral and hit the vehicle while sitting on the launch pad. Plans for further developments to improve on this predictive capability in preparation for Artemis II are also presented.

Jeremy T. Pinier↗
NASA NTRSDate not supplied

3D Geolocation of Simulated Lightning Sources from Low-Earth Orbit

The recent removal of the Lightning Imaging Sensor from the International Space Station has left an observational gap in lightning detection from low-Earth orbit (LEO). However, new studies have demonstrated the potential for 3D geolocation of lightning sources using orbiting sensors. The Cubespark mission concept aims to take advantage of these developments by deploying a constellation of satellites with radio frequency (RF) sensors and optical imagers to not only map lightning locations, but also to collect bi-spectral flash images. These new capabilities include mapping storm charge structure, flash channel structure, and distinguishing microphysical processes throughout flash development, helping link microphysics and convective processes with overall flash and storm structure around the globe from LEO. In this study, we simulate lightning RF sources in the very high frequency (VHF) band, extrapolate their signals to space-based detection using an improved ionospheric model, and reconstruct their 3D locations using a time-of-arrival (TOA) minimization algorithm. Various constellation configurations, locations, and atmospheric conditions are considered in order to identify and quantify the three main sources of geolocation error: geometric, ionospheric, and instrumental effects. The promising results of this study emphasize the potential of space-based 3D lightning mapping under diverse conditions. 3D resolution is shown to be better than 1-2 km in many cases, enabling new global applications in meteorology and climate sciences. Here we present a selection of these geolocation results as seen from space alongside recent advancements, paving the way for a future generation of LEO lightning mappers.

CubeSpark↗
NASA NTRS2024

Simulated Feasibility of 3D Lightning Mapping from Space

In addition to the awe it inspires, lightning can illuminate the microphysical processes hidden away within deep convection. The current generation of space-based lightning mapping uses mostly 2D optical imaging to connect overall flash characteristics to their parent storm dynamics, but are missing a dimension’s worth of information. With lightning now classified as an essential climate variable, future spaceborne mappers will need improved capabilities to take advantage of the 3D structure of lightning flashes to support meteorological and climate modeling. We report here on a study of the feasibility of implementing a radio frequency (RF)–based network of satellites for 3D lightning mapping in high resolution from low Earth orbit (LEO). Lightning sources are simulated using existing tools of the Lightning Mapping Array (LMA), modified for orbital detection, and spatially reconstructed using a Levenberg-Marquardt geolocation algorithm to assess sources of uncertainty in these solutions. We analyze the benefits and limitations of this approach compared to existing orbital and ground-based methods. Results of this study show that lightning can be mapped in 3D with a vertical location accuracy better than 2 km using as few as five satellites in LEO capable of measuring the time-of-arrival of impulsive RF signals in the very high frequency (VHF) band. The consequence of this study is that high-resolution, spaceborne 3D mapping of lightning is achievable across most of the globe, having crucial implications for our understanding of not only lightning, but also severe weather development, climate science, and more.

CubeSpark↗
NASA NTRSDate not supplied

The Next Generation of Lightning Mapping

With the removal of the Lightning Imaging Sensor from the International Space Station, a gap has opened in lightning observation from low-Earth orbit. The CubeSpark mission concept aims to fill this role using a constellation of satellites with radio frequency (RF) sensors and bi-spectral optical imagers to observe lightning flashes more completely and with better resolution than is currently possible from space. In this study, we assess the feasibility of multiple methods of not only mapping lightning locations, but also inferring 3D flash and charge structures. This is done primarily by simulating lightning emissions in the very high frequency (VHF) band, modeling their propagation to orbital sensors, and reconstructing their locations using time-of-arrival (TOA) minimization algorithms. Constellation shape, number, and atmospheric conditions are varied in order to quantify the three main sources of geolocation error: geometric, ionospheric, and instrumental effects. The promising results presented here demonstrate 3D resolution better than 1-2 km in many cases, enabling new applications in meteorology and climate sciences.

CubeSpark↗
NASA NTRS2003

Evaluation of Trajectory Errors in an Automated Terminal-Area Environment

A piloted simulation experiment was conducted to document the trajectory errors associated with use of an airplane's Flight Management System (FMS) in conjunction with a ground-based ATC automation system, Center-TRACON Automation System (CTAS) in the terminal area. Three different arrival procedures were compared: current-day (vectors from ATC), modified (current-day with minor updates), and data link with FMS lateral navigation. Six active airline pilots flew simulated arrivals in a fixed-base simulator. The FMS-datalink procedure resulted in the smallest time and path distance errors, indicating that use of this procedure could reduce the CTAS arrival-time prediction error by about half over the current-day procedure. Significant sources of error contributing to the arrival-time error were crosstrack errors and early speed reduction in the last 2-4 miles before the final approach fix. Pilot comments were all very positive, indicating the FMS-datalink procedure was easy to understand and use, and the increased head-down time and workload did not detract from the benefit. Issues that need to be resolved before this method of operation would be ready for commercial use include development of procedures acceptable to controllers, better speed conformance monitoring, and FMS database procedures to support the approach transitions.

Oseguera-Lohr, Rosa M.↗
NASA NTRS2015

Dynamic Arrival Routes: A Trajectory-Based Weather Avoidance System for Merging Arrivals and Metering

Convective weather can cause arrival traffic to fly less efficient weather avoidance routes and is the primary cause for time-based metering to be discontinued. Dynamic Arrival Routes (DAR) is a trajectory-based weather avoidance system that is designed to help improve arrival traffic flow when weather is present. The DAR system continuously analyzes airborne arrival flights for opportunities to reroute them to more efficient arrival routes or around weather that is predicted to be on their current flight plan early enough to allow the arrival time-based metering system to adjust its times of arrival for the presence of weather. Analysis of 93 hours of actual traffic over 12 different days from Fort Worth Center showed DAR proposed more efficient arrival reroutes for 352 arrival flights for an average time savings of 12.3 minutes per flight at a look-ahead time of 60 minutes from the meter fix. DAR also identified 642 arrival flights with a need to deviate around weather and proposed weather avoidance routes that were analytically shown to remain weather-free 83 percent of the time for a look-ahead time of 30 minutes from the meter fix.

Arrivals↗
NASA NTRS1977

Measurements of blast waves from bursting frangible spheres pressurized with flash-evaporation vapor or liquid

Incident overpressure data from frangible spheres pressurized with a flash-evaporating fluid in liquid and vapor form were obtained in laboratory experiments. Glass spheres under higher than ambient internal pressure of Freon-12 were purposely burst to obtain time histories of overpressure. Nondimensional peak pressures, arrival and duration times, and impulses are presented, and whenever possible plotted and compared with compiled data for Pentolite high-explosive. The data are generally quite repeatable and show differences from blast data produced by condensed high-explosives.

Esparaza, E. D.↗
NASA NTRS2015

Terminal Sequencing and Spacing (TSS)

The Federal Aviation Administration's (FAA) Next Generation Air Transportation System (or NextGen) is being designed to support the predicted increases in traffic volume and to increase the capacity, efficiency and safety of the National Airspace System (NAS). The Federal Aviation Administration (FAA) identifies Performance-Based Navigation (PBN) as a key enabling capability of NextGen and is actively publishing PBN procedures at major airports throughout the United States. Standard Terminal Arrival Routes (STARs), procedures, and approaches are designed to facilitate fuel-efficient continuous descent operations. However, their use is limited during periods of high traffic demand due to the complexity of merging multiple streams of aircraft to the same airport. As a result, most arrivals in the Terminal Radar Approach Control (TRACON) area continue to be controlled using radar vectoring and step-down descents, resulting in high workload for controllers and diverting aircraft from efficient PBN trajectories. To address this issue, NASA developed the Terminal Sequencing and Spacing (TSS) system, an advanced arrival management technology that combines time-based scheduling and controller-based precision spacing tools. TSS is a ground-based controller automation tool that facilitates sequencing and merging arrivals on Performance-Based Navigation (PBN) routes, especially during highly congested demand periods. The two main components of TSS are: 1) a scheduler that de-conflicts merging arrivals in the terminal area by computing appropriate arrival times to the runway threshold and upstream terminal merge points, and 2) a set of Controller-Managed Spacing (CMS) decision support tools to efficiently assist schedule conformance. Sixteen high-fidelity human-in-the-loop simulations involving more than five hundred hours of evaluation time, were conducted to mature TSS from proof-of-concept design to a fully functional prototype. Results indicate high controller use and acceptability of the CMS tools as well as improved PBN route conformance (Figure 2). The TSS technology was transferred to the FAA in 2014, and it is targeted for deployment to several busy airports in the U.S. starting in 2018. Potential enhancements to TSS using DataComm will also be presented.

controller-managed spacing↗