Diffractoid x-ray focusing
Presents aspheric concave diffraction surface that is able to focus sharply single wavelength of x-ray or ultraviolet radiation which may originate from either nearby or far-distant source.
Kastner, S. O.↗
SEARCH · Engineering Papers
Results for “X RADIATION”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Particle energization in the inner, nonazimuthally symmetric magnetospheres of neutron stars
The energization process of magnetic pumping, a combination of time dependent magnetic mirror fields with pitch-angle scattering, is applied to trapped charged particles drifting in corotating, azimuthally nonsymmetric neutron star magnetospheres. When particle energization is balanced by synchrotron radiation loss, it is found that protons, rather than electrons, reach considerable kinetic energies and radiate, in the X-ray regime, at rates up to the 10 to the 6th power MeV/proton/sec.
Borovsky, J. E.↗
Efficient multiphoton dissociation of CF3I/+/ in the metastable X 2 E 1/2 excited state using CW infrared laser radiation
Explore the source record for details and available documents.
Thorne, L. R.↗
Positional characteristics of meter-decameter wavelength bursts associated with hard X-ray bursts
Isolated and grouped type III bursts have been observed in temporal association with impulsive hard X-ray bursts in the 26-154 keV range, down to frequencies as low as 30 MHz and out to a distance of 3.1 solar radii from the disk center. The bursts occurred in regions whose electron density may have been as much as 20 times higher than that of the Newkirk-Saito model. The present observations indicate that electron acceleration/injection occurs over a region covering a wide range of magnetic field lines. It is noted that, of the two gradual hard X-ray bursts observed in association with type IV bursts, one was accompanied by a type II event, while the other was not, although both exhibited the same characteristics. It is suggested that the gradual burst associated with a type IV only involved electrons which are trapped in the plasmoid which produces the meter-decameter emission, while another fraction of the population is trapped in the low-lying loops which produce the hard X-ray and centimeter radiation.
Kundu, M. R.↗
SMM observations of K-alpha radiation from fluorescence of photospheric iron by solar flare X-rays
High-resolution Fe K-alpha spectra near 1.94 A observed during solar flares with the Bent Crystal Spectrometer on the Solar Maximum Mission are presented. The evidence for two possible excitation mechanisms, electron impact and fluorescence, is examined. It is found that the fluorescence mechanism satisfactorily describes the results, while the observations do not support electron collisional excitation of the Fe K-alpha transitions in low ionization stages (II-XII) of iron. Using Bai's model of the fluorescent excitation process, the photospheric iron abundance relative to that of hydrogen is estimated to be 5-6 x 10 to the -5th. The mean height of the soft X-ray source producing the K-alpha fluorescence is calculated on the basis of this model for about 40 large flares. The solar K-alpha lines are found to be about 25 percent wider than those measured in the laboratory. Weak line features observed at wavelengths shorter than that of the K-alpha lines are discussed.
Parmar, A. N.↗
Inspecting Hollow Parts With a CAT Scanner
Technique well known in medicine, used on manufactured objects. As it passes through a part, beam of X-rays or other radiation attenuated and scattered. Computer records variations in beam as part rotated and constructs cross section for display on video monitor. Computeraided tomography (CAT) measures wall thickness and detecting flaws in hollow turbine blades or other curved parts.
Kuhr, G. A.↗
Prompt acceleration of ions by oblique turbulent shocks in solar flares
Solar flares often accelerate ions and electrons to relativistic energies. The details of the acceleration process are not well understood, but until recently the main trend was to divide the acceleration process into two phases. During the first phase elctrons and ions are heated and accelerated up to several hundreds of keV simultaneously with the energy release. These mildly relativistic electrons interact with the ambient plasma and magnetic fields and generate hard X-ray and radio radiation. The second phase, usually delayed from the first by several minutes, is responsible for accelerating ions and electrons to relativistic energies. Relativistic electrons and ions interact with the solar atmosphere or escape from the Sun and generate gamma ray continuum, gamma ray line emission, neutron emission or are detected in space by spacecraft. In several flares the second phase is coincident with the start of a type 2 radio burst that is believed to be the signature of a shock wave. Observations from the Solar Maximum Mission spacecraft have shown, for the first time, that several flares accelerate particles to all energies nearly simultaneously. These results posed a new theoretical problem: How fast are shocks and magnetohydrodynamic turbulence formed and how quickly can they accelerate ions to 50 MeV in the lower corona? This problem is discussed.
Decker, R. B.↗
The flare kernel in the impulsive phase
The impulsive phase of a flare is characterized by impulsive bursts of X-ray and microwave radiation, related to impulsive footpoint heating up to 50 or 60 MK, by upward gas velocities (150 to 400 km/sec) and by a gradual increase of the flare's thermal energy content. These phenomena, as well as non-thermal effects, are all related to the impulsive energy injection into the flare. The available observations are also quantitatively consistent with a model in which energy is injected into the flare by beams of energetic electrons, causing ablation of chromospheric gas, followed by convective rise of gas. Thus, a hole is burned into the chromosphere; at the end of impulsive phase of an average flare the lower part of that hole is situated about 1800 km above the photosphere. H alpha and other optical and UV line emission is radiated by a thin layer (approx. 20 km) at the bottom of the flare kernel. The upward rising and outward streaming gas cools down by conduction in about 45 s. The non-thermal effects in the initial phase are due to curtailing of the energy distribution function by escape of energetic electrons. The single flux tube model of a flare does not fit with these observations; instead we propose the spaghetti-bundle model. Microwave and gamma-ray observations suggest the occurrence of dense flare knots of approx. 800 km diameter, and of high temperature. Future observations should concentrate on locating the microwave/gamma-ray sources, and on determining the kernel's fine structure and the related multi-loop structure of the flaring area.
Dejager, C.↗
Comparison of solar hard X-ray and UV line and continuum bursts with high time resolution
The close temporal correlation between the ultraviolet line emission from OV (lambda 1371A) and hard X-rays above 30 keV has been previously established from a comparison of data sets from the Ultraviolet Spectrometer and Polarimeter (UVSP) and Hard X-Ray Burst Spectrometer (HXRBS) instruments on Solar Maximum Mission (SMM). Corresponding features were found to be coincident to within 1 s. Following the SMM repair, similar measurements were made for a flare occurring on May 20, 1984, at 0259 UT, this time with UVSP observing in the continuum near 1600A with much higher time resolution (75ms). The simultaneity of several features in this flare were established to better than 0.1 s, thus reinforcing the close relationship between hard X-ray and UV emission. Following the repair of the UVSP wavelength drive, similar measurements were repeated for a flare occurring at 0148 UT on April 24, 1985. This event was observed simultaneously in the OV line, the UV continuum and in hard X-rays by the same SMM instruments. Temporal comparisons of the three data sets show that, for a few selected features, simultaneity of the hard X-ray and UV emissions does exist. However, cross-correlation analyses of the entire data sets indicate that there is a trend for the fastest OV emission features to be delayed with respect to the hard X-rays by approx. 260 ms. On the other hand the fast OV and UV continuum features are simultaneous to within the instrumental uncertainty. The combined results have established the close relationship of the impulsive phase hard X-ray and UV continuum and OV line emissions. They lend support to the argument that both the hard X-ray and UV radiations originate low in the solar atmosphere.
Orwig, L. E.↗
X-ray background, discrete sources, and diffuse processes
Possible sources are discussed for the cosmic residual X-ray background (XRB) radiation at energies from 3-50 keV. Sources have been identified that can account for at least 50 percent of the XRB. The residual has a spectrum with a flat slope up to 30 keV. Comptonized thermal gas emission is ruled out as the origin of the radiation since the emitting regions would be diffuse and Comptonization would require regions no more than a parsec across. Optically thin bremsstrahlung from discrete sources is a more viable candidate, although the associated spectra would not have been accessible with the Einstein Observatory. Future observations with the AXAF and ROSAT satellites in imaging and spectroscopic modes are discussed for gaining definitive data on the real sources of the XRB.
Giacconi, Riccardo↗
Standard Method For Radiation Tests Of Liquids
Simple procedure provides standard method for radiation tests of liquids. Assures identical handling and dosage so data from different test laboratories compared reliably. Pair of glass vials, joined by frangible neck and equipped with valves, used. Third vial also used. Filled with control specimen and not irradiated. Developed for measuring properties of liquids for use in radiation-resistant liquid-dielectric capacitors, procedure used for any of variety of liquids proposed for use in high-radiation environment - in x-ray and particle-accelerating machines and nuclear reactors, for example.
Bouquet, Frank L.↗
Transient particle acceleration in strongly magnetized neutron stars
Although several reasonable physical processes have been proposed to account for the initial energy release in transient events on strongly magnetized neutron stars, and although the manifestation of this activity as a burst of X- or gamma-radiation evidently results from the Compton upscattering of soft photons by relativistic electrons, a self-consistent picture for the particle acceleration itself is lacking. Here, a detailed model is developed in which sheared Alfven waves generated by the energized stellar crust (e.g., due to a starquake) accelerate the changes to large Lorentz factors. For canonical stellar parameters and a burst energy of about 10 to the 37th ergs, the maximum attainable Lorentz factor is gamma(max) 50m, where m (of about 2-3/cm) characterizes the shear of the magnetic perturbation. This value of gamma(max) is consistent with the particle energy required to produce the most energetic gamma-rays (of about 10-100 MeV) observed in gamma-ray bursts.
Melia, Fulvio↗
On the origin of variable 511 keV line emission from the Galactic center region
Variable narrow-line emission at 511 keV, due to positron annihilation, has been observed from the region of the Galactic center for over a decade with high-resolution Ge spectrometers. The variable nature of this emission suggests that a significant fraction of the observed radiation is produced by a single source in the central region of the Galaxy. Recent observations with an imaging gamma-ray spectrometer of low energy resolution have revealed a daylong burst of annihilation radiation from the X-ray source 1E 1740.7-2042 located at an angular distance of 0.9 deg from the Galactic center and aligned with a dense molecular cloud. It is proposed that the variable narrow 511 keV line emission is due to positrons released impulsively (time scale of about 1 day) from 1E 1740.7-2942 into the molecular cloud where they slow down and annihilate on a longer time scale of up to a year.
Ramaty, R.↗
Chemical analyses of provided samples
A batch of four samples were received and chemical analysis was performed of the surface and near surface regions of the samples by the surface analysis by laser ionization (SALI) method. The samples included four one-inch diameter optics labeled windows no. PR14 and PR17 and MgF2 mirrors 9-93 PPPC exp. and control DMES 26-92. The analyses emphasized surface contamination or modification. In these studies, pulsed desorption by 355 nm laser light and single-photon ionization (SPI) above the sample by coherent 118 nm radiation (at approximately 5 x 10(exp 5) W/cm(sup 2)) were used, emphasizing organic analysis. For the two windows with an apparent yellowish contaminant film, higher desorption laser power was needed to provide substantial signals, indicating a less volatile contamination than for the two mirrors. Window PR14 and the 9-93 mirror showed more hydrocarbon components than the other two samples. The mass spectra, which show considerable complexity, are discussed in terms of various potential chemical assignments.
Becker, Christopher H.↗
Chemical analyses of provided samples
Two batches of samples were received and chemical analysis was performed of the surface and near surface regions of the samples by the surface analysis by laser ionization (SALI) method. The samples included four one-inch optics and several paint samples. The analyses emphasized surface contamination or modification. In these studies, pulsed sputtering by 7 keV Ar+ and primarily single-photon ionization (SPI) by coherent 118 nm radiation (at approximately 5 x 10(exp 5) W/cm(sup 2) were used. For two of the samples, also multiphoton ionization (MPI) at 266 nm (approximately 5 x 10(exp 11) W/cm(sup 2) was used. Most notable among the results was the silicone contamination on Mg2 mirror 28-92, and that the Long Duration Exposure Facility (LDEF) paint sample had been enriched in K and Na and depleted in Zn, Si, B, and organic compounds relative to the control paint.
Becker, Christopher H.↗
Wind dynamics in SMC X-1. 1: Hydrodynamic simulation
We present a three-dimensional hydrodynamic simulation of the disrupted stellar wind in the high-mass X-ray binary system SMC X-1. The three dominant processes that determine the geometry of the wind in high X-ray luminosity systems such as SMC X-1 are the X-ray suppression of the stellar wind from the X-ray irradiated face of the primary star, the focusing of the radiatively driven wind in the X-ray shadow by the effects of stellar rotation, and the rapid X-ray heating of gas in the vicinity of the X-ray source, including the X-ray illuminated surface of the primary star. The resulting distribution of circumstellar gas provides a successful explanation for the asymmetric, extended eclipse transitions and the intensity of the deep eclipse X-ray emission in SMC X-1, as well as a possible explanation for the X-ray dips seen near superior conjunction of the X-ray source in Cyg X-1.
Blondin, John M.↗
Estimating Trabecular Bone Mechanical Properties From Non-Invasive Imaging
An important component in developing countermeasures for maintaining musculoskeletal integrity during long-term space flight is an effective and meaningful method of monitoring skeletal condition. Magnetic resonance imaging (MRI) is an attractive non-invasive approach because it avoids the exposure to radiation associated with X-ray based imaging and also provides measures related to bone microstructure rather than just density. The purpose of the research for the 1996 Summer Faculty Fellowship period was to extend the usefulness of the MRI data to estimate the mechanical properties of trabecular bone. The main mechanical properties of interest are the elastic modulus and ultimate strength. Correlations are being investigated between these and fractal analysis parameters, MRI relaxation times, apparent densities, and bone mineral densities. Bone specimens from both human and equine donors have been studied initially to ensure high-quality MR images. Specimens were prepared and scanned from human proximal tibia bones as well as the equine distal radius. The quality of the images from the human bone appeared compromised due to freezing artifact, so only equine bone was included in subsequent procedures since these specimens could be acquired and imaged fresh before being frozen. MRI scans were made spanning a 3.6 cm length on each of 5 equine distal radius specimens. The images were then sent to Dr. Raj Acharya of the State University of New York at Buffalo for fractal analysis. Each piece was cut into 3 slabs approximately 1.2 cm thick and high-resolution contact radiographs were made to provide images for comparing fractal analysis with MR images. Dual energy X-ray absorptiometry (DEXA) scans were also made of each slab for subsequent bone mineral density determination. Slabs were cut into cubes for mechanical using a slow-speed diamond blade wafering saw (Buehler Isomet). The dimensions and wet weights of each cube specimen were measured and recorded. Wet weights were also recorded. Each specimen was labeled and marked to denote anatomic orientations, i.e. superior/inferior (S/I), media/lateral (M/L), and anterior/posterior (A/P). The actual locations of each cube cut were documented and images distributed to define ROI locations for other analyses (to Raj Acharya for fractal analysis, to Jon Richardson at Baylor College of Medicine for DEXA, and to Chen Lin at Baylor College of Medicine for T2* MRI analysis). Quasistatic mechanical testing consisted of compressive loading in all three mutually perpendicular anatomic directions. Cyclic loading was applied for 10 cycles to precondition the specimen and results calculated for the eleventh. For one of three directions tested on each specimen, the 10 cycles were followed with loading to failure. Testing is currently proceeding and once completed the results will be correlated with data from the other analyses. One of the main points of interest is the relationship between fractal dimension and mechanical properties. Throughout preparation and testing all specimens were maintained hydrated with physiological saline and stored frozen when not being used.
Hogan, Harry A.↗
Solar Flares and Their Prediction
Solar flares and coronal mass ejection's (CMES) can strongly affect the local environment at the Earth. A major challenge for solar physics is to understand the physical mechanisms responsible for the onset of solar flares. Flares, characterized by a sudden release of energy (approx. 10(exp 32) ergs for the largest events) within the solar atmosphere, result in the acceleration of electrons, protons, and heavier ions as well as the production of electromagnetic radiation from hard X-rays to km radio waves (wavelengths approx. = 10(exp -9) cm to 10(exp 6) cm). Observations suggest that solar flares and sunspots are strongly linked. For example, a study of data from 1956-1969, reveals that approx. 93 percent of major flares originate in active regions with spots. Furthermore, the global structure of the sunspot magnetic field can be correlated with flare activity. This talk will review what we know about flare causes and effects and will discuss techniques for quantifying parameters, which may lead to a prediction of solar flares.
Adams, Mitzi L.↗