Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WELLS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Anisotropy of the electron g factor in quantum wells based on cubic semiconductors

A new mechanism for the spin splitting of electron levels in asymmetric quantum wells based on GaAs-type semiconductors relative to rotations of the magnetic field in the well plane is suggested. It is demonstrated that the anisotropy of the Zeeman splitting (linear in a magnetic field) arises in asymmetric quantum wells due to the interface spin-orbit terms in the electron Hamiltonian. In the case of symmetric quantum wells, it is shown that the anisotropy of the Zeeman splitting is a cubic function of the magnitude of the magnetic field, depends on the direction of the magnetic field in the interface plane as the fourth-order harmonic, and is governed by the spin-orbit term of the fourth order by the kinematic momentum in the electron Hamiltonian of a bulk semiconductor.

36 MATERIALS SCIENCE↗

The role of electron-electron interaction in the process of charge-carrier capture in deep quantum wells

The role of electron-electron interaction in the process of electron capture to a deep quantum well is investigated. Using two-level and three-level quantum wells as examples, the basic electron-capture mechanisms, i.e., the interaction with optical phonons and the Coulomb electron-electron interaction, are considered, and the corresponding capture probabilities and electron lifetimes are calculated. The effect of Auger recombination on the charge-carrier distribution in a quantum well is also taken into account. With this taken into consideration, a set of rate equations is solved for a nonsteady-state mode, and the time dependences of the electron concentration at the ground energy level in the quantum well are found. The contributions of each of the recombination processes under consideration are shown.

74 ATOMIC AND MOLECULAR PHYSICS↗

Emission properties of InGaAs/GaAs heterostructures with quantum wells and dots after irradiation with neutrons

The effect of neutron radiation on the luminescence of InGaAs/GaAs heterostructures with quantum wells and quantum dots is studied. It is found that neutron radiation results both in the formation of defects and in the radiation-induced annealing of growth-related defects. Quantum dots are more stable to neutron radiation in comparison with quantum wells. It is shown that the layer of InGaAs/GaAs quantum dots located near the surface is less sensitive to irradiation with neutrons compared with a similar layer located in the bulk. In the first case, one can observe an increase in the photoluminescence and electroluminescence intensities after irradiation with neutrons, which is related to the effects of radiation-induced annealing. The pronounced effect of elastic strains in the InGaAs/GaAs quantum wells on the extent of quenching of the photoluminescence intensity upon irradiation with neutrons is revealed. In heterostructures with quantum wells, the effect of radiation-induced annealing manifests itself in a shift of the photoluminescence peak to longer wavelengths as a result of a decrease in elastic strains upon irradiation with neutrons. Doping of the GaAs buffer layer with silicon also reduces the value of this spectral shift.

36 MATERIALS SCIENCE↗

Characterization of the spatial inhomogeneity of heterointerfaces in GaAs/AlGaAs quantum wells by photoreflectance spectroscopy

GaAs/AlGaAs quantum-well heterostructures with well widths from 20 to 35 nm are investigated by photoreflectance spectroscopy. The broadening of spectral lines related to band-to-band transitions increases with the transition energy and decreases with the well width. The observed decrease in the broadening parameter with increasing well width is explained in terms of spatial inhomogeneity of the heterointerfaces. According to the experimental data, the interface inhomogeneity in the structures under study is 0.34–0.39 nm (1.3–1.4 monolayers)

36 MATERIALS SCIENCE↗

On the gain properties of “thin” elastically strained InGaAs/InGaAlAs quantum wells emitting in the near-infrared spectral region near 1550 nm

The results of experimental studies of the gain properties of “thin” (3.2 nm thick) elastically strained InGaAs/InGaAlAs quantum wells emitting in the near-infrared spectral region near 1550 nm are presented. The results of studying the threshold and gain characteristics of stripe laser diodes with active regions based on “thin” quantum wells with a lattice–substrate mismatch of +1.0% show that the quantum wells under study exhibit a high modal gain of 11 cm{sup –1} and a low transparency current density of 46 A/cm{sup 2} per quantum well.

36 MATERIALS SCIENCE↗

Electron properties of surface InGaAs/InAlAs quantum wells with inverted doping on InP substrates

The electron-transport and optical properties of heterostructures with a surface InGaAs/InAlAs quantum well in the cases of inverted δ doping with Si atoms (below the quantum well) and of standard δ doping (above the quantum well) are compared. It is shown that, in the case of inverted doping, the two-dimensional electron density in the quantum well is increased in comparison with the case of the standard arrangement of the doping layer at identical compositions and thicknesses of other heterostructure layers. The experimentally observed features of low-temperature electron transport (Shubnikov–de Haas oscillations, Hall effect) and the photoluminescence spectra of heterostructures are interpreted by simulating the band structure.

36 MATERIALS SCIENCE↗

Intraband Radiation Absorption by Holes in InAsSb/AlSb and InGaAsP/InP Quantum Wells

Microscopic analysis of intraband radiation absorption by holes with their transition to the spin-split band for InAsSb/AlSb and InGaAsP/InP semiconductor quantum wells is performed in the context of the four-band Kane model. The calculation is performed for two incident-radiation polarizations: along the crystal-growth axis and in the quantum-well plane. It is demonstrated that absorption with transition to the discrete spectrum of spin-split holes has a higher intensity than absorption with transitions to the continuous spectrum. The dependences of the intraband absorption coefficient on temperature, hole density, and quantum- well width are thoroughly analyzed. It is shown that intraband radiation absorption can be the main mechanism of internal radiation losses in lasers based on quantum wells.

36 MATERIALS SCIENCE↗

Effect of Features of the Band Spectrum on the Characteristics of Stimulated Emission in Narrow-Gap Heterostructures with HgCdTe Quantum Wells

We report on the stimulated emission obtained in the wavelength range of 20.3–17.4 μm on the interband transitions at T = 8–50 K in HgCdTe quantum wells placed in a dielectric waveguide formed from wide-gap CdHgTe solid solution. Heterostructures with HgCdTe quantum wells are interesting for designing long-wavelength lasers operating in the wavelength range of 25–60 μm, which is not covered by currently available quantum cascade lasers. It is shown that the maximum temperature of stimulated emission is determined by the position of lateral maxima in the dispersion dependences in the first valence subband of the quantum well. Methods for suppressing nonradiative recombination in the structures with HgCdTe quantum wells are discussed.

36 MATERIALS SCIENCE↗

Diffusion Blurring of GaAs Quantum Wells Grown at Low Temperature

The processes of the diffusion blurring of a periodic system of GaAs quantum wells separated by AlGaAs barriers are studied by photoluminescence spectroscopy. The system is grown by molecular-beam epitaxy at a low temperature (200°C) and additionally doped with Sb and P isovalent impurities. Postgrowth annealing at the temperature 750°C for 30 min induces an increase in the energy corresponding to the photoluminescence peak of the e1–hh1 exciton state in quantum wells because of blurring of the epitaxial GaAs/AlGaAs interfaces due to enhanced Al–Ga interdiffusion in the cation sublattice. For the Al concentration profile defined by linear diffusion into quantum wells, the Schrödinger equation for electrons and holes is solved. It is found that the experimentally observed energy position of the photoluminescence peak corresponds to the Al–Ga interdiffusion length 3.4 nm and to the effective diffusion coefficient 6.3 × 10{sup –17} cm{sup 2} s{sup –1} at the temperature 750°C. This value is found to be close to the corresponding value for GaAs quantum wells grown at low temperatures without additional doping with Sb and P impurities. From the results obtained in the study, it is possible to conclude that enhanced As–Sb and As–P interdiffusion in the anion sublattice only slightly influences the processes of Al–Ga interdiffusion in the cation sublattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation into the Distribution of Built-in Electric Fields in LED Heterostructures with Multiple GaN/InGaN Quantum Wells by Electroreflectance Spectroscopy

Electric-field nonuniformity in the active region of a LED (light-emitting diode) heterostructure based on five identical GaN/InGaN quantum wells is investigated by the electroreflectance method. The energies of band-to-band transitions in the quantum wells and barriers are determined from the analysis of electroreflectance spectra using the Kramers–Kronig transforms. The procedure for estimating the electric-field strength in separate quantum wells of the active region by the position of spectral lines is proposed. It is found that the energies of the main transition in quantum wells of the active region with zero bias of the p–n junction differ by a magnitude on the order of 140 meV, which corresponds to a difference in the electric-field strengths of 0.78 MV/cm. It is shown that the nonuniformity of the electric field in the active region depends on the p–n junction bias.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

EGS Collab Experiment 2: Testbed Well Orientation Data

This dataset contains the north seeking gyro data for each of the 11 boreholes drilled at the Experiment 2 testbed on the 4100 foot level of the SURF (Sanford Underground Research Facility). Each gyro file is in individual folders for each well. A single folder called 'E2 All Well Trajectories' contains the trajectories for all the wells but in the mine coordinate system. An image of the well layout is provided in a PowerPoint.

15 GEOTHERMAL ENERGY↗

SECARB Cranfield Well Logs

Borehole logs from the SECARB project at the Cranfield oil site in Franklin, Mississippi . Well logs are a part of the geologic characterization phase of SECARB; CFU 31F-1, CFU 31F-2, CFU 31F-3 well logs from Detailed Area of Study (DAS) and other well logs. Associated Publications: Butsch, R., Brown, A. L., Bryans, B., Kolb, C., Hovorka, S. D., 2013, Integration of well-based subsurface monitoring technologies: lessons learned at SECARB study, Cranfield, MS: International Journal of Greenhouse Gas Control https://doi.org/10.1016/j.ijggc.2013.06.010.

Borehole log↗

Supplementary Data for "Evaluation of the Economic Implications of Varied Pressure Drawdown Strategies Generated Using a Real-time, Rapid Predictive, Multi-fidelity Model for Unconventional Oil and Gas Wells" by Bello, K., Vikara, D., Sheriff, A., Viswanathan, H., Carr, T., Sweeney, M., O'Malley, D., Marquis, M., Vactor, R.T., and Cunha, L.

The Bello et al. study evaluates the impact of contrasting pressure drawdown on gas productivity and the resulting economics of a well in the Marcellus Shale of the Appalachian Basin. This research applies a techno-economic analysis approach to help identify potential ways pressure management strategies can be used to improve cumulative recovery of hydraulically fractured horizontal wells while maintaining project profitability. Gas production forecast outlook scenarios of the Marcellus Shale Energy and Environment Laboratory Laboratory's MIP-3H well were generated under varying pressure drawdowns using two approaches: 1) a novel physics-informed machine learning (PIML) workflow and 2) via traditional reservoir simulation in Computer Modeling Group’s (CMG) GEM Compositional & Unconventional Simulator. Cash flow and other economic metrics of interest were compiled on the production outlook using the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL) Unconventional Shale Well Economic Model (UShWEM).The sheets within this Microsoft ExcelTM workbook provide the economic metric outputs for the baseline condition and the one-at-a-time (OAT) sensitivity analysis of UShWEM's input parameters for each of the production scenarios evaluated.

Fracture Network Model↗

Optical Two-Dimensional Spectroscopy of Semiconductor Quantum Wells and Quantum Dots (Final Report)

The goal of this program was to implement optical 2-dimensional coherent spectroscopy and apply it to electronic excitations, including excitons, in semiconductors. Specif ically of interest were epitaxially grown quantum wells that exhibit disorder due to well width fluctuations and quantum dots. In both cases, 2-D spectroscopy provided information regarding coupling among excitonic localization sites. In the first year of the project, a significant fraction of our progress was on quantum wells, rather than quantum dots, which have been more our focus in recent years. The two main results were 1) providing an understanding of the polarization dependence of the homogeneous linewidth in quantum wells based on using an anharmonic boson model, and 2) using multidimensional spectroscopy to observe spectral diffusion due to exciton migration amongst within localized states due to disorder.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Building a better framework for evaluating human well-being impacts in global change analysis: The example of energy security

Human well-being can be greatly impacted by the global environmental and socio-economic change captured in Integrated Models of Global Change (IMGCs). Though most IMGCs address some aspects of well-being, their underlying modeling approach and ‘philosophy’ differ widely, and some key elements – like energy security – are omitted. In this report, we describe a project in which we set out to a create a framework through which the well-being dimensions of the household are connected to key drivers of socio-economic and environmental change – and how the needed metrics, data and modeling methods can be brought to bear. We focus on the well-being dimensions of energy, and lay out the necessary elements to capturing household energy security – using household energy burden as the relevant metric. We begin by showing the conceptual linkage of energy burden to environmental drivers like temperature change, using a simple and straightforward conceptual framework. We then go further to use the example of GCAM-USA to show how some key analytical features of the model can provide insight into how energy security across different groups can change along alternative pathways to sustainability. We compare our preliminary assessment of household energy burden to existing data and suggest further steps to improve and refine this analysis in future research.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Toward Drilling the Perfect Geothermal Well: An International Research Coordination Network for Geothermal Drilling Optimization Supported by Deep Machine Learning and Cloud Based Data Aggregation

The EDGE project, supported by the U.S. Department of Energy Geothermal Technologies Office under award DE-EE0008793, established a data-driven framework for improving the efficiency, cost-effectiveness, and reliability of geothermal well drilling. The project focused on developing scalable data infrastructure, advanced machine learning and probabilistic models, and integrated analytics tools to support continuous drilling optimization. A central objective was to reduce geothermal drilling costs by up to seventy percent while minimizing the risk of well failure through predictive diagnostics and adaptive planning. Over the project period, a comprehensive data repository was designed and deployed, incorporating records from over one hundred geothermal wells across varied geological settings. This repository supported both structured and unstructured data and adhered to FAIR data principles, enabling provenance tracking, quality control, and standardized metadata. The project introduced automated ingestion pipelines and a cloud-hosted platform that facilitated access to raw, processed, and derived datasets. This infrastructure served as the foundation for model development and analysis. Machine learning workflows were developed to predict key drilling metrics including rate of penetration, non-productive time, and total drilling costs. Self-organizing maps and dimensionality reduction methods were used to uncover operational patterns and outliers, while supervised learning algorithms such as random forests and deep neural networks were applied to forecast performance outcomes. The models were validated on heterogeneous datasets from both U.S. and Icelandic fields, demonstrating variable but significant predictive accuracy. The results indicated that finer temporal resolution, inclusion of lithological data, and consistency in operational annotations could substantially improve model performance. The project also implemented process mining techniques to reconstruct state-transition models from drilling event logs. These models enabled the identification of deviations from optimal workflows and provided insights into recurring failure modes. Analysis of non-productive time highlighted the impact of equipment failures, geological challenges, and human factors, offering opportunities for targeted mitigation strategies. The EDGE Dashboard was developed as a web-based expert system integrating data visualization, model outputs, and user-driven queries. It provided an accessible interface for operators to explore historical data, evaluate predicted outcomes, and compare drilling scenarios. Initial feedback from project partners suggested that the dashboard could serve as a foundation for more advanced advisory and optimization tools. Overall, the EDGE project demonstrated the feasibility and value of applying modern data science techniques to geothermal drilling. It delivered a set of interoperable tools and models that can support more efficient, lower-risk well development. The findings point toward a viable path for transitioning from advisory analytics to semi-autonomous drilling systems, contingent on continued collaboration, expanded datasets, and field validation. The project results have immediate relevance for drilling operations, data management practices, and future geothermal R&D efforts aimed at achieving reliable, cost-competitive geothermal energy at scale.

15 GEOTHERMAL ENERGY↗

Unconventional Wells Interference: Supervised Machine Learning for Detecting Fracture Hits

The primary objective of the study was development of a machine learning (ML)-based workflow for fracture hit (“frac hit”) detection and monitoring using shale oil-field data such as drilling surveys, production history (oil and produced water), pressure, and fracking start time and duration records. The ML method takes advantage of long short-term memory (LSTM) and multilayer perceptron (MLP) neural networks to identify the frac hits due to hydraulic communication between the fracking child well(s) and the producing parent well(s) within the same pad (intra-pad interaction) and/or on different pads (inter-pad interaction). It utilizes time series of pressure and production data from within a pad and from adjacent pads. The workflow can capture time variable features of frac hits when the model architecture is deep and wide enough, with enough trainable parameters for deep learning and feature extraction, as demonstrated in this paper by using training and testing subsets of the field data from selected neighboring pads with over a couple of hundred wells. The study was focused on frac-hit interaction among paired wells and demonstrated that the ML model, once trained, can predict the frac-hit probability.

58 GEOSCIENCES↗

Effect of Computational Schemes on Coupled Flow and Geo-Mechanical Modeling of CO 2 Leakage through a Compromised Well

Carbon capture, utilization, and storage (CCUS) describes a set of technically viable processes to separate carbon dioxide (CO 2 ) from industrial byproduct streams and inject it into deep geologic formations for long-term storage. Legacy wells located within the spatial domain of new injection and production activities represent potential pathways for fluids (i.e., CO 2 and aqueous phase) to leak through compromised components (e.g., through fractures or micro-annulus pathways). The finite element (FE) method is a well-established numerical approach to simulate the coupling between multi-phase fluid flow and solid phase deformation interactions that occur in a compromised well system. We assumed the spatial domain consists of a three-phases system: a solid, liquid, and gas phase. For flow in the two fluids phases, we considered two sets of primary variables: the first considering capillary pressure and gas pressure (PP) scheme, and the second considering liquid pressure and gas saturation (PS) scheme. Fluid phases were coupled with the solid phase using the full coupling (i.e., monolithic coupling) and iterative coupling (i.e., sequential coupling) approaches. The challenge of achieving numerical stability in the coupled formulation in heterogeneous media was addressed using the mass lumping and the upwinding techniques. Numerical results were compared with three benchmark problems to assess the performance of coupled FE solutions: 1D Terzaghi’s consolidation, Liakopoulos experiments, and the Kueper and Frind experiments. We found good agreement between our results and the three benchmark problems. For the Kueper and Frind test, the PP scheme successfully captured the observed experimental response of the non-aqueous phase infiltration, in contrast to the PS scheme. These exercises demonstrate the importance of fluid phase primary variable selection for heterogeneous porous media. We then applied the developed model to the hypothetical case of leakage along a compromised well representing a heterogeneous media. Considering the mass lumping and the upwinding techniques, both the monotonic and the sequential coupling provided identical results, but mass lumping was needed to avoid numerical instabilities in the sequential coupling. Additionally, in the monolithic coupling, the magnitude of primary variables in the coupled solution without mass lumping and the upwinding is higher, which is essential for the risk-based analyses.

deformation flow↗