Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Volcano”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Lidar measurements of the post-fuego stratospheric aerosol

Fifteen lidar observations of the stratospheric aerosol were made between February and November 1975. All observations revealed the greatly increased particulate backscattering that followed the eruption of the volcano Fuego in October 1974. Vertical structure consisted initially of multiple layers, which later merged to form a single, broader peak. Essentially all of the increased scattering was confined to altitudes below 20 km. Hence, aerosol layer centroids in 1975 were typically several km below their altitude prior to the eruption. Radiative and thermal consequences of the measured post-Fuego layer were computed using several recently published models. The models predict a temperature increase of several K at the altitude of the layer, caused by the infrared absorption bands of the sulfuric acid particles. The surface temperature decrease predicted by the models is considerably smaller than 1 K, partly because of the small optical thickness of the volcanic layer, and partly because of its short residence time relative to the earth-ocean thermal response time.

Russell, P. B.↗

Io - Ground-based observations of hot spots

Observations of Io in eclipse demonstrate conclusively that Io emits substantial amounts of radiation at 4.8 and 3.8 micrometers and a measurable amount at 2.2 micrometers. Color temperatures derived from the observations fit blackbody emission at 560 K. The required source area to yield the observed 4.8-micrometer flux is approximately 5 x 10 to the -5th of the disk of Io and is most likely comprised of small hot spots in the vicinity of the volcanoes.

Sinton, W. M.↗

Interpretation of postseismic deformation with a viscoelastic relaxation model

A viscoelastic relaxation model is used to interpret postseismic surface deformation for the large-magnitude Aleutian earthquakes of 1957 and 1965. The lithosphere and asthenosphere are modeled as elastic solids with an anomalous viscoelastic inclusion below the island arc volcanoes. It is found that the observed postseismic surface deformation is a corollary of the known island arc structure. A satisfactory fit to the uplift following the 1957 earthquake is found for a viscoelastic volume with 80-km width extending from a depth of 50 to 200 km.

Wahr, J.↗

Genesis of the Smartville arc-ophiolite, Sierra Nevada foothills, California

Rare earth element analyses of metavolcanic rocks from the Smartville, Calif. ophiolite divide the uniform suite of pillowed and massive lavas into the lower part consisting of massive, brecciated tholeiites, an intrusive dike-sill complex, and part of a plutonic suite. The tholeiites are light REE depleted with a (Ce)N range of 6.5 to 26.0 and (Yb)N of 6.0 to 30.0; it is suggested that the tholeiites were produced by partial melting of a LREE depleted source similar to MORB. The upper part of the volcanic pile is comprised of basaltic-andesitic flows and interbedded coarse to fine volcanic sediments; these 'calc-alkaline' rocks are light REE enriched with the (Ce)N range of 17.0-28.0 and (Yb)N of 8.0 to 12.0. Finally, petrographic investigations of volcanic sediments and sulfide ore deposits in the lava show that the ophiolite formed near a group of active submarine and subareal volcanoes.

Menzies, M.↗

Trajectories of the Mount St. Helens eruption plume

The plume of the major eruption of Mount St. Helens on May 18, 1980 penetrated 10 to 11 km into the stratosphere, attaining heights of 22 to 23 km. Wind shears rapidly converted the plume from an expanding vertical cone to a thin, slightly inclined lamina. The lamina was extruded zonally in the stratosphere as the lower part moved eastward at jet stream velocities, while the upper part slowly moved westward in the region of nonsteady transition from the westerlies to the summer stratospheric easterlies. Trajectories computed to position the NASA U-2 aircraft for sampling in the plume are described. Plume volume after 8 hours of strong volcanic emission is estimated at 2,000,000 cu km. Only about 1% of this volume is attributed to the volcano; the rest was entrained from the environment.

Danielsen, E. F.↗

Trace element composition of the Mount St. Helens plume - Stratospheric samples from the 18 May eruption

Atmospheric particulate material collected from the stratosphere in the plume of the 18 May 1980 eruption of the Mount St. Helens volcano was quite similar in composition to that of ash that fell to the ground in western Washington. However, there were small but significant differences in concentrations of some elements with altitude, indicating that the stratospheric material was primarily produced from fresh magma, not fragments of the mountain.

Vossler, T.↗

Characterization of aerosols from eruptions of Mount St. Helens

Measurements of mass concentration and size distribution of aerosols from eruptions of Mount St. Helens as well as morphological and elemental analyses were obtained between 7 April and 7 August 1980. In situ measurements were made in early phreatic and later, minor phreatomagmatic eruption clouds near the vent of the volcano and in plumes injected into the stratosphere from the major eruptions of 18 and 25 May. The phreatic aerosol was characterized by an essentially monomodal size distribution dominated by silicate particles larger than 10 micrometers in diameter. The phreatomagmatic eruption cloud was multimodal; the large size mode consisted of silicate particles and the small size modes were made up of mixtures of sulfuric acid and silicate particles. The stratospheric aerosol from the main eruption exhibited a characteristic narrow single mode with particles less than 1 micrometer in diameter and nearly all of the mass made up of sulfuric acid droplets.

Chuan, R. L.↗

Martian ages

Four discussions are conducted: (1) the methodology of relative age determination by impact crater statistics, (2) a comparison of proposed Martian impact chronologies for the determination of absolute ages from crater frequencies, (3) a report on work dating Martian volcanoes and erosional features by impact crater statistics, and (4) an attempt to understand the main features of Martian history through a synthesis of crater frequency data. Two cratering chronology models are presented and used for inference of absolute ages from crater frequency data, and it is shown that the interpretation of all data available and tractable by the methodology presented leads to a global Martian geological history that is characterized by two epochs of activity. It is concluded that Mars is an ancient planet with respect to its surface features.

Neukum, G.↗

An investigation into the utilization of HCMM thermal data for the discrimination of volcanic and Eolian geological units

The nature of the HCMM data set and the general geologic application of thermal inertia imaging using HCMM data were studied. The CCT's of five sites of interest were obtained and displayed. The upgrading of the image display system was investigated. Fragment/block size distributions in various terrain types wre characterized with emphasis on volcanic terrain. The SEASAT L-band radar images of volcanic landforms at Newberry Volcano, Oregon, were analyzed and compared to imagery from LANDSAT band 7.

Head, J. W., III↗

Spatial color variations in the volcanic plume at Loki, on Io

Multicolor Voyager 1 photographs of the Loki volcanic plume, on Io, have been analyzed to determine the nature and quantity of the scattering material within the plume. This work indicates that there are two particle populations. The first population consists of particles with radius of 0.001-0.01 microns, while the second population, which is concentrated near the source, comprises particles with radius greater than 1 micron. The population of smaller particles includes most of the particulate mass in the plume. This work increases the previously estimated particulate mass (Johnson et al., 1979) and suggests that the SO2 gas spectroscopically identified by Pearl et al. (1979) may represent transient flow from the volcano instead of an atmosphere in stable equilibrium with the local surface.

Collins, S. A.↗

Topography of Venus and earth - A test for the presence of plate tectonics

Comparisons of earth and Venus topography by use of Pioneer/Venus radar altimetry are examined. Approximately 93% of the Venus surface has been mapped with a horizontal resolution of 200 km and a vertical resolution of 200 m. Tectonic troughs have been indicated in plains regions which cover 65% of Venus, and hypsometric comparisons between the two planets' elevation distributions revealed that while the earth has a bimodal height distribution, Venus displays a unimodal configuration, with 60% of the planet surface within 500 m of the modal planet radius. The effects of mapping the earth at the same resolution as the Venus observations were explored. Continents and oceans were apparent, and although folded mountains appeared as high spots, no indications of tectonic activity were discernible. A NASA Venus Orbiting Imaging radar is outlined, which is designed to detect volcanoes, folded mountain ranges, craters, and faults, and thereby allow definition of possible plate-tectonic activity on Venus.

Head, J. W.↗

Volcanism on Mars

In situ chemical analyses of Martian soil by the Viking lander indicate mafic to ultramafic source rocks, consistent with both remote sensing data indicating the presence of pyroxene and olivine and with petrologic modeling which suggests that Martian lavas are iron-rich and ultramafic. Photogeological analysis of the Martian surface reveals two types of volcanic morphology: (1) central volcanoes, developed by continued and prolonged eruption from a point source vent; and (2) volcanic plains, recognized by mare ridges and flow lobes. When these volcanic morphologies are combined with relative age data, a volcanic history may be derived that is consistent with a moonlike thermal history involving a lithosphere of increasing thickness with time which gradually suppresses the volcanism.

Greely, R.↗

Steady-state magma discharge at Etna 1971-81

Throughout the past decade Mount Etna has been in almost continuous activity and even during periods of repose incandescent lava has often been visible in at least one of the summit vents. Using observations by Italian, British and French volcanological teams, the volumes of lava produced by each eruption from 1971 to July 1981 have been estimated. The computed output of magma for this period approximates to a rate of 0.7 cu m/s. This is compared with the output rate estimates for Etna's historic past. The steady-state nature of the output during the past decade has implications for the interpretation of the volcano's internal plumbing and the petrology of its lavas, and the assumption that this state will be maintained allows a discussion of the timing and magnitude of future eruptions.

Wadge, G.↗

Mutagens and carcinogens - Occurrence and role during chemical and biological evolution

The roles of mutagenic and carcinogenic substances in early biologic evolution is examined, along with terrestrial and extraterrestrial sources of mutagens and carcinogens. UV solar radiation is noted to have served to stimulate prebiotic life while also causing harmful effects in plants and animals. Aromatic compounds have been found in meteorites, and comprise leukemogens, polycyclic hydrocarbons, and nitrasamine precursors. Other mutagenic sources are volcanoes, and the beginning of evolution with mutagenic substances is complicated by the appearance of malignancies due to the presence of carcinogens. The atmosphere of the Precambrian period contained both mutagens and early carcinogens and, combined with volcanic activity discharges, formed an atmospheric chemical background analogous to the background ionizing radiation. Carcinogenesis is concluded to be intrinsic to nature, having initiated evolution and, eventually, cancer cells.

Giner-Sorolla, A.↗

Ignimbrites of Amazonis Planitia region of Mars

The terms ignimbrite and ash flow tuff are used to describe relatively thin but extensive sheets of material interpreted to be of pyroclastic origin and to consist of volcanic ash or pumice fragments. Criteria for distinguishing ignimbrites from other geologic materials are considered, and characteristics observed for rock units interpreted as ignimbrites in Amazonis Planitia are discussed. A series of rock units which are thought to represent ignimbrites have been mapped along an east-west border zone between the highland plateau and lowland plains of Amazonis Planitia. The area is roughly bounded by a triangle whose apices are the volcanoes Apollinaris Patera, Biblis Patera, and Olympus Mons. Attention is given to aspects of general geology, morphology and stratigraphy, and thickness and volume estimates. Correlations with other data are considered and some theoretical aspects of Martian ignimbrite emplacement are discussed.

Scott, D. H.↗

Mare basin filling on the moon - Laboratory simulations

Laboratory simulations of lavas filling a stylized lunar multi-ringed basin demonstrate several relationships between the morphology of the emplaced lavas and various eruption conditions. The rate of effusion is the primary control on the gross shape of the accumulated lavas, with relatively low rates (e.g., Hawaiian style) leading to shield volcanoes and high rates (e.g., flood eruptions) producing flat, ponded lavas. Pre-flow topography can have a significant effect on the general form of individual flows and the position of flow features such as lava channels. Rootless vents develop in many parts of the flow, including areas apparently related to the position of basin rings, giving the false appearance of aligned true vent systems.

Greeley, R.↗

Fine particles in the Soufriere eruption plume

The size distributions of fine particles measured at tropospheric altitudes in the periphery of the eruption plume formed during the April 17, 1979 eruption of Soufriere Volcano and in the low-level effluents on May 15, 1979 were found to be bimodal, having peak concentrations at geometric mean diameters of 1.1 and 0.23 micrometers. Scanning electron microscopy and energy-dispersive X-ray analysis of the samples revealed an abundance of aluminum and silicon and traces of sodium, magnesium, chlorine, potassium, calcium, and iron in the large-particle mode. The submicrometer-sized particles were covered with liquid containing sulfur, assumed to be in the form of liquid sulfuric acid.

Woods, D. C.↗

Small particles in plumes of Mount St. Helens

Particles in the size range 0.1-25 microns were sampled by aircraft carrying a quartz crystal microcascade in the Mount St. Helens plume on three dates in August and September 1980. Two of the sampling dates represented 'typical' emissions of the volcano between plinian eruptions. One sampling flight was made 1-4 hours before the small plinian eruption of August 7, 1980 when the plume had become discontinuous and visibly darker. The plume sampled on August 7, before the eruption, contained mainly approximately 2-micron diameter silicic glass particles, fragments of the Mount St. Helens magma. The typical plumes sampled on September 22 and August 6 had much smaller concentrations of particles, trimodal size distributions with peaks at 10, 0.4, and 0.1 microns. The particles were largely nonsilicate and apparently represented Cu-Zn oxide (10 micron peak), Al sulfate, chloride, and oxide, and sulfuric acid (smallest size peak).

Rose, W. I.↗