Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VISCOSITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Investigating the temperature dependence of the specific shear viscosity of QCD matter with dilepton radiation

This work reports on investigations of the effects on the evolution of viscous hydrodynamics and on the flow coefficients of thermal dileptons, originating from a temperature-dependent specific shear viscosity η/s(T) at temperatures beyond 180 MeV formed at the Relativistic Heavy-Ion Collider (RHIC). Here we show that the elliptic flow of thermal dileptons can resolve the magnitude of η/s at the high temperatures, where partonic degrees of freedom become relevant, whereas discriminating between different specific functional forms will likely not be possible at RHIC using this observable.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Frequency-dependent complex viscosity obtained for a liquid two-dimensional dusty plasma experiment

Strongly coupled plasmas in a liquid phase can be characterized by a complex viscosity η(ω), which is a function of frequency. Data from a single experiment with dusty plasma were analyzed to compare η(ω) obtained by two fundamentally distinct methods. In a nonequilibrium method, a pair of counterpropagating laser beams, separated by a gap, applied a sinusoidal shear to a two-dimensional liquid, and η(ω) was determined using the constitutive relation. In an equilibrium method, there was no externally applied shear, so η(ω) could be calculated with a generalized Green-Kubo relation. The results for these two methods are compared for the real and imaginary parts of η(ω). For both parts, it is confirmed that the two methods yield results that agree qualitatively in their trends with frequency, with the real part diminishing with ω and the imaginary part increasing with ω, as expected for viscoelastic liquids. Quantitatively, the values of η(ω) obtained by the two methods differ slightly. For the experiment that we analyze, values for the real and imaginary parts of η(ω) are substantially greater than those reported in an earlier experiment, which we attribute to shear thinning effects in the earlier experiment. As a result, the experiment we analyze was designed to minimize shear thinning, unlike the earlier experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Moving Forward to Constrain the Shear Viscosity of QCD Matter

In this work, we demonstrate that measurements of rapidity differential anisotropic flow in heavy-ion collisions can constrain the temperature dependence of the shear viscosity to entropy density ratio η/s of QCD matter. Comparing results from hydrodynamic calculations with experimental data from the RHIC, we find evidence for a small η/s ≈ 0.04 in the QCD crossover region and a strong temperature dependence in the hadronic phase. A temperature independent η/s is disfavored by the data. We further show that measurements of the event-by-event flow as a function of rapidity can be used to independently constrain the initial state fluctuations in three dimensions and the temperature dependent transport properties of QCD matter.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Shear and bulk viscosity for a pure glue theory using an effective matrix model

At nonzero temperatures, the deconfining phase transition can be analyzed using an effective matrix model to characterize the change in holonomy. The model includes gluons and two-dimensional ghost fields in the adjoint representation, or “teens.” As ghosts, the teen fields are responsible for the decrease of the pressure as 𝑇 →𝑇 𝑑 , with 𝑇 𝑑 the transition temperature for deconfinement. Using the solution of this matrix model for a large number of colors, the parameters of the teen fields are adjusted so that the expectation value of the Polyakov loop is close to the values from the lattice. The shear, 𝜂, and bulk, 𝜁, viscosities are computed at nonzero holonomy to leading logarithmic order in weak coupling. In the pure glue theory, the value of the Polyakov loop is relatively large in the deconfined phase, ≈1/2 at 𝑇 𝑑 . Consequently, if 𝑠 is the entropy density, while 𝜂/𝑠 decreases as 𝑇 →𝑇 𝑑 , it is still well above the conformal bound. In contrast, 𝜁/𝑠 is largest at 𝑇 𝑑 , comparable to 𝜂/𝑠, then falls off rapidly with increasing temperature and is negligible by ∼2⁢𝑇 𝑑 .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

High-viscosity injector-based pink-beam serial crystallography of microcrystals at a synchrotron radiation source

Since the first successful serial crystallography (SX) experiment at a synchrotron radiation source, the popularity of this approach has continued to grow showing that third-generation synchrotrons can be viable alternatives to scarce X-ray free-electron laser sources. Synchrotron radiation flux may be increased ∼100 times by a moderate increase in the bandwidth (`pink beam' conditions) at some cost to data analysis complexity. Here, we report the first high-viscosity injector-based pink-beam SX experiments. The structures of proteinase K (PK) and A 2A adenosine receptor (A 2A AR) were determined to resolutions of 1.8 and 4.2 Å using 4 and 24 consecutive 100 ps X-ray pulse exposures, respectively. Strong PK data were processed using existing Laue approaches, while weaker A 2A AR data required an alternative data-processing strategy. This demonstration of the feasibility presents new opportunities for time-resolved experiments with microcrystals to study structural changes in real time at pink-beam synchrotron beamlines worldwide.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Metabolic engineering of oilseed crops to produce high levels of novel acetyl glyceride oils with reduced viscosity, freezing point and calorific value

Summary Seed oils have proved recalcitrant to modification for the production of industrially useful lipids. Here, we demonstrate the successful metabolic engineering and subsequent field production of an oilseed crop with the highest accumulation of unusual oil achieved so far in transgenic plants. Previously, expression of the E uonymus alatus diacylglycerol acetyltransferase ( E a DA c T ) gene in wild‐type A rabidopsis seeds resulted in the accumulation of 45 mol% of unusual 3‐acetyl‐1,2‐diacyl‐ sn ‐glycerols (acetyl‐ TAG s) in the seed oil (Durrett et al ., 2010 PNAS 107:9464). Expression of E a DA c T in dgat1 mutants compromised in their ability to synthesize regular triacylglycerols increased acetyl‐ TAG s to 65 mol%. Camelina and soybean transformed with the E a DA c T gene accumulate acetyl‐triacylglycerols (acetyl‐ TAG s) at up to 70 mol% of seed oil. A similar strategy of coexpression of E a DA c T together with RNA i suppression of DGAT 1 increased acetyl‐ TAG levels to up to 85 mol% in field‐grown transgenic C amelina. Additionally, total moles of triacylglycerol ( TAG ) per seed increased 20%. Analysis of the acetyl‐ TAG fraction revealed a twofold reduction in very long chain fatty acids ( VLCFA ), consistent with their displacement from the sn ‐3 position by acetate. Seed germination remained high, and seedlings were able to metabolize the stored acetyl‐ TAG s as rapidly as regular triacylglycerols. Viscosity, freezing point and caloric content of the C amelina acetyl‐ TAG oils were reduced, enabling use of this oil in several nonfood and food applications.

Liu, Jinjie↗
DOE OSTI2022

Effect of Thermal Expansion Coefficient, Viscosity and Melting Range in Simulation of PCM Embedded Heat Exchangers With and Without Fins

Phase change material heat exchangers (PCMHX) have an important role in integrating renewable energy systems. PCMHX can offer high storage density at various temperatures of interest and can be used for grid load shifting purposes. Numerical models enable engineers to estimate PCMHX performance for different design parameters and operating conditions. Modeling phase change phenomena is challenging due to the complex time-dependent nature of the process. The accuracy of models is highly sensitive to PCM thermo-physical properties. Thermal expansion coefficient (β), viscosity (μ) and melting temperature range (MR) of a PCM are important properties, especially when natural convection is not negligible. In PCMHX modeling, using less than accurate values for these properties can have significant impact on the simulation outcomes. These properties and discussions thereof are not readily available in the literature. This paper presents a brief review of the literature and a numerical study investigating the model sensitivity to the above-mentioned properties for PCMHX with and without fins. CFD is used to evaluate the charging (melting) phenomena. The study quantifies the impact of uncertainty in these properties on the melting rate and temperature profile. Constant wall temperature was considered as heat source with no heat loss to ambient. Here, the results show that β and μ has significant effect on the melting rate and evolution of the melting front. For a non-finned domain when comparing results for different published values of β and μ, the deviation in melting time can be up to 12.9% and 57.6% respectively. For high wall temperatures, change in melting range did not impact melting time. But when the wall temperature is reduced, up to 9.8% deviation in melting time is observed.

CFD↗
DOE OSTI2019

Nonlocal Transport and Implied Viscosity and Diffusivity throughout the Boundary Layer in LES of the Southern Ocean with Surface Waves

Abstract Observations from the Southern Ocean Flux Station provide a wide range of wind, buoyancy, and wave (Stokes) forcing for large-eddy simulation (LES) of deep Southern Ocean boundary layers. Almost everywhere there is a nonzero angle Ω between the shear and the stress vectors. Also, with unstable forcing there is usually a depth where there is stable stratification, but zero buoyancy flux and often a number of depths above where there is positive flux, but neutral stratification. These features allow nonlocal transports of buoyancy and of momentum to be diagnosed, using either the Eulerian or Lagrangian shear. The resulting profiles of nonlocal diffusivity and viscosity are quite similar when scaled according to Monin–Obukhov similarity theory in the surface layer, provided the Eulerian shear is used. Therefore, a composite shape function is constructed that may be generally applicable. In contrast, the deeper boundary layer appears to be too decoupled from the Stokes component of the Lagrangian shear. The nonlocal transports can be dominant. The diagnosed across-shear momentum flux is entirely nonlocal and is highly negatively correlated with the across-shear component of the wind stress, just as nonlocal and surface buoyancy fluxes are related. Furthermore, in the convective limit the scaling coefficients become essentially identical, with some consistency with atmospheric experience. The nonlocal contribution to the along-shear momentum flux is proportional to (1 − cosΩ) and is always countergradient, but is unrelated to the aligned wind stress component.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Maximizing the Proppant Carrying and Viscoelastic Properties of the Bakken Hypersaline-Produced Water with High-Viscosity Friction Reducers for Sustainable Applications

Summary The development and production of unconventional reservoirs, such as the Bakken Formation, have become a resolved mystery for operators in North America since the arrival and advancement of horizontal drilling and hydraulic fracturing technologies. As a result, unconventional reservoir assets became the central focus of the oil and gas industry at the state, national, and global levels. The produced water from these activities in the Bakken Formation have high salt contents (110,000–350,000 ppm) total dissolve solids (TDS) and can pose significant challenges to the environment if not treated. Deep injection into disposal wells is the routine method used to get rid of the Bakken produced water. However, there have been some concerns that unrestrained injections, in addition to polluting the groundwater, could potentially lead to seismic activities either at the time of injection or in the near future. To diminish the environmental impacts that may be associated with induced seismicity, including the reduction of the costs of water acquisition, the produced water can be treated and reused in the hydraulic fracturing processes. Also, the treated water could be used for irrigation purposes, for power generation, and coal mining operations. The issues of waste water and residual oil high in TDS are challenges yet to be effectively addressed despite preceding research and studies on advancing produced water technologies. The goal of this study is to explore all applicable ways by which the produced water from the Bakken Formation can serve as a replacement base fluid for use with polymers like the high-viscosity friction reducers (HVFRs) to create hydraulic fracturing fluids that can be stable with reservoir conditions and also be able to minimize environmental impacts and cost of operations. Experimental investigations using the high-salinity produced water from the Bakken Formation with HVFRs were carried out. The studies included a base case that served as a bench mark for comparing the effectiveness of the other scenarios. The results indicate that the Bakken hyper-saline produced water can withstand effect of heavy metals, salinity, hardness and remain stable through different shear rates (66–330 s−1) when treated with higher dosages [4–8 gal/1,000 gal (gpt)] of HVFRs. Filtration and dilution were the only methods used on the Bakken Formation produced wate for this research

Engineering↗
DOE OSTI2013

Numerical Verification of Bounce Harmonic Resonances in Neoclassical Toroidal Viscosity for Tokamaks

This Letter presents the first numerical verification for the bounce-harmonic (BH) resonance phenomena of the neoclassical transport in a tokamak perturbed by non-axisymmetric magnetic fields. The BH resonances were predicted by analytic theories of neoclassical toroidal viscosity (NTV), as the parallel and perpendicular drift motions can be resonant and result in a great enhancement of the radial momentum transport. A new drift-kinetic δf guiding-center particle code, POCA, clearly verified that the perpendicular drift motions can reduce the transport by phase-mixing, but in the BH resonances the motions can form closed orbits and particles radially drift out fast. The POCA calculations on resulting NTV torque are largely consistent with analytic calculations, and show that the BH resonances can easily dominate the NTV torque when a plasma rotates in the perturbed tokamak and therefore is a critical physics for predicting the rotation and stability in ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2013

Calculation of neoclassical toroidal viscosity with a particle simulation in the tokamak magnetic braking experiments

Accurate calculation of perturbed distribution function δf and perturbed magnetic field δB is essential to achieve prediction of non-ambipolar transport and neoclassical toroidal viscosity (NTV) in perturbed tokamaks. This paper reports a study of the NTV with a δf particle code (POCA) and improved understanding of magnetic braking in tokamak experiments. POCA calculates the NTV by computing δf with guiding-center orbit motion and using δB from the ideal perturbed equilibrium code (IPEC). POCA simulations are compared with experimental estimations for NTV, which are measured from angular momentum balance (DIII-D) and toroidal rotational damping rate (NSTX). The calculation shows good agreement in total NTV torque for the DIII-D discharge, where an analytic neoclassical theory also gives a consistent result thanks to relatively large aspect-ratio and slow toroidal rotations. In NSTX discharges, where the aspect-ratio is small and the rotation is fast, the theory only gives a qualitative guide for predicting NTV. However, the POCA simulation largely improves the quantitative NTV prediction for NSTX. It is discussed that a self-consistent calculation of δB using general perturbed equilibria is eventually necessary since a non-ideal plasma response can change the perturbed field and thereby the NTV torque.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2013

IHLW PCT, Spinel T1%, Electrical Conductivity, and Viscosity Model Development (Final Report)

This report is the last in a series of currently scheduled reports that presents the results from the High Level Waste (HLW) glass formulation development and testing work performed at the Vitreous State Laboratory (VSL) of the Catholic University of America (CUA) and the development of IHLW property-composition models performed jointly by Pacific Northwest National Laboratory (PNNL) and VSL for the River Protection Project-Waste Treatment and Immobilization Plant (RPP-WTP). Specifically, this report presents results of glass testing at VSL and model development at PNNL for Product Consistency Test (PCT), one-percent crystal fraction temperature (T1%), electrical conductivity (EC), and viscosity of HLW glasses. The models presented in this report may be augmented and additional validation work performed during any future immobilized HLW (IHLW) model development work. Completion of the test objectives is addressed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2016

Final Technical Report for Year 5 Early Career Research Project "Viscosity and equation of state of hot and dense QCD matter"

The Section below summarizes research activities and achievements during the fifth (last) year of the PI’s Early Career Research Project (ECRP). Unlike the first four years of the project, the last year was not funded under the American Recovery and Reinvestment Act (ARRA). The ECRP advanced two main areas: i) radiative 3 ↔ 2 radiative transport, via development of a new computer code MPC/Grid that solves the Boltzmann transport equation in full 6+1D (3X+3V+time); and ii) application of relativistic hydrodynamics, via development of a self-consistent framework to convert viscous fluids to particles. In Year 5 we finalized thermalization studies with radiative gg ↔ ggg transport (Sec. 1.1.1) and used nonlinear covariant transport to assess the accuracy of fluid-to-particle conversion models (Sec. 1.1.2), calculated observables with self-consistent fluid-to-particle conversion from realistic viscous hydrodynamic evolution (Secs. 1.2.1 and 1.2.2), extended the covariant energy loss formulation to heavy quarks (Sec. 1.4.1) and studied energy loss in small systems (Sec. 1.4.2), and also investigated how much of the elliptic flow could have non-hydrodynamic origin (Sec 1.3). Years 1-4 of the ECRP were ARRA-funded and, therefore, they have their own report document ’Final Technical Report for Years 1-4 of the Early Career Research Project “Viscosity and equation of state of hot and dense QCD matter”’ (same award number DE-SC0004035). The PI’s group was also part of the DOE JET Topical Collaboration, a multi-institution project that overlapped in time significantly with the ECRP. Purdue achievements as part of the JET Top- ical Collaboration are in a separate report “Final Technical Report summarizing Purdue research activities as part of the DOE JET Topical Collaboration” (award DE-SC0004077).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2017

Development of a Repeatable Protocol to Uniformly Coat Internal Complex Geometries of Fine Featured 3D Printed Objects with Ceramic Material, including Determination of Viscosity Limits to Properly Coat Certain Pore Sizes

HEPA filters are commonly used in air filtration systems ranging in application from simple home systems to the more advanced networks used in research and development. Currently, these filters are most often composed of glass fibers with diameter on the order of one micron with polymer binders. These fibers, as well as the polymers used, are known to be fragile and can degrade or become extremely brittle with heat, severely limiting their use in high temperature applications. Ceramics are one promising alternative and can enhance the filtration capabilities compared to the current technology. Because ceramic materials are more thermally resistant and chemically stable, there is great interest in developing a repeatable protocol to uniformly coat fine featured polymer objects with ceramic material for use as a filter. The purpose of this experiment is to determine viscosity limits that are able to properly coat certain pore sizes in 3D printed objects, and additionally to characterize the coatings themselves. Latex paint was used as a surrogate because it is specifically designed to produce uniform coatings.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Viscosity and Surface Tension of Metals

Here is a review of the various options for the modeling of viscosity in metals and alloys with some results (sections A to E) with additional examples on how these models perform (Sections C to E), before some concluding remarks are presented in Section F.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Miniature Flow and Viscosity Sensors

Integration of flow sensing into microfluidic systems such as automated sample preparation and processing has seen limited applications due to the large cost and size of commercially available flow sensors. Nevertheless, flow sensing is a critical missing components for many high precision microfluidic applications. Los Alamos National Laboratory researchers have developed a miniature flow sensor technology based on a novel microfluidic method developed at the Laboratory. The method takes advantage of the fluid-structure interaction between the fluid and an elastic membrane to provide precision measurement. Depending on how it is integrated, it is also possible to use the technology to measure viscosity of the fluid. The flow sensor can work with a wide range of fluids.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Report of Viscosity Measurements on Reaction Simulant and 2-(methylamino) ethanol carbamate (NMEA carbamate) for the Explosives Destruction System (EDS) P3 System

The reaction products for the proposed chemistry for phosgene treatment in the Explosive Destruction System (EDS) are viscous. This will affect the time required to drain the EDS vessel. Viscosity measurements were made on two samples and the results for one sample have been fit to curves.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2021

Scaling of Turbulent Viscosity and Resistivity: Extracting a Scale-dependent Turbulent Magnetic Prandtl Number

Turbulent viscosity νt and resistivity ηt are perhaps the simplest models for turbulent transport of angular momentum and magnetic fields, respectively. The associated turbulent magnetic Prandtl number Pr t ≡ ν t /η t has been well recognized to determine the final magnetic configuration of accretion disks. Here, we present an approach to determining these "effective transport" coefficients acting at different length scales using coarse-graining and recent results on decoupled kinetic and magnetic energy cascades. By analyzing the kinetic and magnetic energy cascades from a suite of high-resolution simulations, we show that our definitions of ν t , η t , and Pr t have power-law scalings in the "decoupled range." We observe that Pr t ≈ 1–2 at the smallest inertial-inductive scales, increasing to ≈5 at the largest scales. Furthermore, based on physical considerations, our analysis suggests that Pr t has to become scale independent and of order unity in the decoupled range at sufficiently high Reynolds numbers (or grid resolution) and that the power-law scaling exponents of velocity and magnetic spectra become equal. In addition to implications for astrophysical systems, the scale-dependent turbulent transport coefficients offer a guide for large-eddy simulation modeling.

79 ASTRONOMY AND ASTROPHYSICS↗