Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Texture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Efficient carbon capture using sub-textured polymer packing surfaces via 3D printing

Gas absorption is a common unit operation whose performance deeply relies on the gas liquid contact behavior. In this work, we report a solid polymeric surface feature containing microscale striation to improve the solid-liquid and gas-liquid contact and facilitate mass transfer. As a proof of concept, the surface feature is adopted for CO 2 capture absorber packing via 3D printing. Besides traditional embossing texture, an additional laminar striation is applied to the packing surface as a sub-texture. The packing shows notable CO 2 mass transfer increase without interfering with other key operating characteristics including pressure drop and liquid holdup. The improvement is based on the synergy of favorable wettability, thin liquid film and increased liquid mixing from rougher surface. In the demonstration test, the packing height could decrease by 33% using the advanced packing with same CO 2 removal, leading to a significant decrease in equipment size and capital expense for commercial CO 2 capture systems.

3D printing↗

Texture induced anisotropy in extruded Ti-6Al-4V-xB alloys

The tensile properties of extruded Ti 6Al 4V xB alloys (wt.%) were evaluated in an orientation perpendicular to the extrusion direction at room-temperature and 455 C. The extrusion process preferentially oriented the basal plane of -Ti perpendicular to the extrusion axis. This strong - phase texture resulted in tensile anisotropy. The tensile strength in the transverse orientation was lower than that in the longitudinal orientation, but it remained greater than that for the ascast Ti 6Al 4V. The TiB phasewas aligned in the extrusion direction and increased B content was found to weaken the -phase texture, causing a weakening of tensile anisotropy. Debonding was not observed during the tensile tests in the transverse orientation, indicating a strong interface bond exists between the TiB phase and the two-phase ( + ) Ti 6Al 4V matrix.

36 MATERIALS SCIENCE↗

Effect of microstructure and crystallographic texture on mechanical anisotropy of Ti-Nb microalloyed hot rolled 800 MPa HSLA steel

Highlights: • Anisotropy in yield strengthis attributed to the relatively stronger {332} . • γ-fiber with counter-balancing {111} and {111} could not induce anisotropy. • The maximum CVN value at 0° is attributed to the higher fraction of {113} and {112} . • The large anisotropy in CVN value, ~ 100 J is observed due to a weaker {332} and {554} . - Abstract: The impact toughness of a Ti+Nb HSLA steel plate, conventionally hot rolled in the austenitic region, were measured at four different directions at 0 °C, −20 °C and −40 °C respectively. The microstructure was characterised using light optical microscope, scanning electron microscope (SEM) followed by evaluation of hot rolled texture using X-ray diffraction (XRD) and orientation distribution function (ODF) obtained from electron back-scattered diffraction (EBSD). The anisotropy in the yield strength (YS) and Charpy impact toughness (CVN) were examined in the light of orientation distribution function (ODF) obtained from EBSD. The skeleton lines, showing intensity distribution, f(g), of the fcc-to-bcc transformation texture, namely the α-fiber (<110>∥ RD), the γ-fiber (<111>∥ ND) and ε-fiber (<110>∥ TD) are considered to explain the observed anisotropy along with microstructural features. The major components like, {112}<110>, {113}<110>, {332}<113>, {111}<112> and {111}<110>, their relative intensity distribution, are found to cause the observed anisotropy in yield strength and impact toughness. A stronger presence of {113}<110> component of the α-fiber over relatively weaker {332}<113> component of the ε-fiber further augments the observed toughness anisotropy. In absence of any microstructural banding, strong the presence of {113}<110> and {112}<110> can also cause delamination in ductile fracture mode.

36 MATERIALS SCIENCE↗

Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel

The effect of laser power on defect characteristics, microstructure development, constituent phases, and crystallographic texture was studied on a laser powder bed fusion (L-PBF) processed 316L stainless steel. A series of cylindrical specimens were additively manufactured as a function of laser power ranging from 380 to 200W with a fixed scan speed of 300 mm/s using a selective laser melting system. The density (in terms of count, surface area, and porosity), size (mean values of major axis length, surface area, and volume), shape (aspect ratio and sphericity), and orientation (in terms of the angle between the major axis and build direction) of macroscopic defects in as-printed L-PBF cylinders were characterized using high-resolution synchrotron x-ray computed microtomography with a 0.65μm resolution. Moreover, the changes in the preferred crystallographic orientations and constituent phases were investigated using high-energy synchrotron x-ray diffraction. Finally, the melt pool shape and grain size/orientation were analyzed using metallography. The results show that the porosity increases linearly from 0.13 to 0.88% with the decrease in laser power. However, even with the decrease in laser power by about half and corresponding seven-fold increase in porosity, the 200W case can still be considered as nearly fully dense. On the other hand, with the same decrease in the laser power, the melt pool size/shape, grain size, and texture changed significantly. In conclusion, the role of energy input in the simultaneous changes in defect properties and microstructure development will be discussed.

36 MATERIALS SCIENCE↗

Effect of the both texture and electrical properties of activated carbon on the CO{sub 2} adsorption capacity

Highlights: • A series of activated carbon pellet without binder was prepared by chemical activation. • Carbon dioxide storage isotherm at 30 °C and up to 25 bars was measured for the microporous carbon. • Adsorption enthalpies have been correlated with the carbon dioxide uptake. • Pyrolysis temperature effect on the electrical conductivity of the samples. • Impact of the both texture and electrical properties on CO{sub 2} adsorption capacity have been deducted - Abstract: A series of activated carbon pellets (ACP) based on olive stones were studied for CO{sub 2} storage application. The surface area, pore volume, and pore diameter were evaluated from the analysis of N{sub 2} adsorption isotherm data. The characterization of carbon materials was performed by scanning electron microscopy (SEM), the powder X-ray diffraction (PXRD) and transmission electron microscopy (TEM). The adsorption enthalpies were obtained by microcalorimetry. The effect of pyrolysis temperature on textural, electrical conductivity and gas adsorption capacities of the ACP were investigated by adsorbing CO{sub 2} at 303 K in the pressure range of 0–2.3 MPa. In fact the electrical conductivity is strongly affected by the microporosity of the samples and the size of the micropore. It increases when the pore size decreases which affect the CO{sub 2} adsorption. Also with increases temperature the free electrons concentration on the surface increases which affect the interaction of the adsorbed gas molecules.

36 MATERIALS SCIENCE↗

Accounting for the effect of dislocation climb-mediated flow on the anisotropy and texture evolution of Mg alloy, AZ31B

The current study explores the role that dislocation climb has in mediating plasticity a Mg alloy at moderately elevated temperatures. Interrupted tensile tests were performed on samples of Mg alloy, AZ31B, sheet in the O temper condition over a range of strain rates (10 -5 to 10 -1 s -1 ) and temperatures (20–350°C) along the rolling and transverse directions. Experimental measurements of the resulting strain anisotropy and texture evolution were used as constraints during a parametric study employing a new crystal plasticity model (VPSC-CLIMB), which explicitly accounts for the kinematics of dislocation climb. The results reveal that the climb of basal (a) dislocations is not only important for dislocation recovery, but also demonstrate that climb accommodates a significant fraction of the strain in conditions where a power-law creep-type constitutive response prevails. This work does not discredit the notion that non-basal slip of (a) and (c+a) dislocations is important over a wide range of temperatures and strain rates. However, it demonstrates that the activation of dislocation climb as the mechanistic change within the power law regime provides an explanation for a wide range of observations, including the simultaneous reduction in strain anisotropy, slowed texture evolution, and rapid increase in strain rate sensitivity. Finally, it is hypothesized that these conclusions may even apply to cases in which grain boundary sliding and/or dynamic recrystallization are observed.

36 MATERIALS SCIENCE↗

Effect of hatch spacing and laser power on microstructure, texture, and thermomechanical properties of laser powder bed fusion (L-PBF) additively manufactured NiTi

This study systematically evaluates the effects of laser powder bed fusion additive manufacturing (L-PBF-AM) parameters (hatch spacing and laser power) on the thermomechanical behavior and microstructure of Ni 50.8 Ti 49.2 shape memory alloy. The samples were fabricated with hatch spacings from 40 to 240 µm and laser powers of 50 and 100 W at a constant scanning speed of 125 mm/s, resulting in parts with volumetric energy density levels from 55 to 666 J/mm 3 and two sets of linear energy densities of 0.4 and 0.8 J/mm. The results showed a reduced melt pool size and discontinuity of scan tracks with decreased laser power. Additionally, the porosity level was increased with larger hatch spacing and lower laser power. More notably, the transformation temperatures increased, and the critical stress, recoverable strain, and functional stability of samples improved with lower hatch spacing, where the recovery ratio of up to 90% was observed, regardless of the employed laser power. This study also discussed the relationship between the fabrication process and texture formation in the L-PBF-AM process. In conclusion, the advantage of L-PBF-AM was revealed in tailoring the microstructure from highly textured samples in [1 1 1] or [0 0 1] direction when hatch spacing lower than laser beam focused was employed, to the appearance of equiaxed solidification front with island grains and random orientations.

36 MATERIALS SCIENCE↗

Effect of film texture on magnetization reversal and switching field in continuous and patterned (Co/Pd) multilayers

We studied the reversal properties of perpendicular anisotropy (Co/Pd) multilayers with different crystallographic textures. In case of continuous films, an increase in the coercivity and reduction in the switching field distribution (SFD) were observed as the growth is improved. From magnetic force microscopy, a stripe-type domain configuration was observed in films deposited at low gas pressure while a bubble-type domain was observed in high pressure deposited films. In patterned films, the SFD did not vary significantly for samples with different textures although a 2 kOe increase in the switching field was measured. In patterned structures, the controllability of SFD may not be related to the improvement of film crystallographic growth as was observed for unpatterned films. The results from this study indicate that local variation in the intrinsic film properties plays a major role in the SFD.

36 MATERIALS SCIENCE↗

Texture and magnetic properties of exchange bias systems

We report on the magnetic and structural properties of IrMn/CoFe exchange bias systems deposited onto a dual seed layer of NiCr(X)/Ru(5 nm), with X=2, 6, and 20 nm. Samples with the structure NiCr (Xnm)/IrMn (7 nm)/CoFe (3 nm)/Ta (10 nm) with X=2, 6, and 20 nm were prepared by dc sputtering for magnetic characterization. A second set of samples with structure NiCr (Xnm)/IrMn (10 nm) with X=2, 6, and 20 nm were deposited onto TEM grids for structural characterization by TEM. A method of manipulating of the TEM grid to allow a qualitative analysis of the in-plane texture of the samples is described and used to analyze the microstructure of these samples. The microstructure and particularly the texture are correlated with the anisotropy constant (K{sub AF}) of the antiferromagnet (AF) layer, with an optimum NiCr seed layer of 6 nm to give a maximum value of K{sub AF} of 1.2x10{sup 7} ergs/cc.

36 MATERIALS SCIENCE↗

Fabrication of surface textures by ion implantation for antireflection of silicon crystals

We report on a method based on ion implantation and thermal annealing to fabricate silicon surface textures for antireflection purposes. Modification to crystalline Si surfaces by hydrogen ion implantation is a well known phenomenon, but the surface structures generated by H implantation alone, typically of a low packing density and small aspect ratio, are not effective in suppressing light reflection from Si. We show that coimplantation of hydrogen and argon, combined with thermal annealing and oxidation, can result in an interesting surface morphology in Si crystals, yielding the lowest light reflectance of {approx}1% over a broad spectral range at various light incident angles. In addition, lattice damage to crystalline Si generated by ion implantation is reduced or completely removed by the annealing processes. Possible mechanisms for the formation of such observed surface textures are discussed.

36 MATERIALS SCIENCE↗

Surface roughness of MgO thin film and its critical thickness for optimal biaxial texturing by ion-beam-assisted deposition

We investigated the deposition time dependences of the in-plane grain alignment ({Delta}{phi}) and the surface roughness (w) of biaxially textured MgO thin films fabricated by ion-beam-assisted deposition (IBAD) and found a strong correlation between them. The time evolution of the surface roughness of IBAD-MgO showed an abrupt increase at the same time corresponding to the beginning of the deterioration in {Delta}{phi}. The roughness versus thickness profiles obtained under different deposition conditions with different assisting ion-beam currents collapsed to a single curve, even though the deposition rates were significantly different in each condition. This implies that the abrupt increase in roughness occurred at the same thickness--of about 4 nm--irrespective of the deposition rate. The result also indicated that the {Delta}{phi} deterioration began with the same thickness of about 4 nm. This ''critical'' thickness of about 4 nm might be related to the completion of the crystallization of the film. Further, deposition beyond the critical thickness, therefore, became merely a homoepitaxial deposition under the ''IBAD'' condition, which was far from optimal because of the ion bombardment and low temperature (no-heating), and thus {Delta}{phi} deteriorated. Based on these considerations, we propose an approach to attain a sharp texture in a IBAD-MgO-based biaxial substrate; moreover, we demonstrated this approach using a two-step deposition process.

36 MATERIALS SCIENCE↗

Twin symmetry texture of energetically condensed niobium thin films on sapphire substrate (a-plane Al 2 O 3 )

An energetic condensation technique, cathodic arc discharge deposition, is used to growepitaxialNiobium(Nb)thin films on a-plane sapphire (hexagonal-closed-packed Al 2 O 3 ) at moderate substrate heating temperature (<400 °C). The epitaxial Nb(110)/Al 2 O 3 (1,1,-2,0) thin films reached a maximum residual resistance ratio (RRR) value 214, despite using a reactor-grade Nbcathode source whose RRR was only 30. The measurements suggest that the film’s density of impurities and structural defects are lower when compared to Nb films produced by other techniques, such as magnetron sputtering, e-beam evaporation or molecular-beam-epitaxy. At lower substrate temperature, textured polycrystalline Nbthin films were created, and the films might have twin symmetry grains with {110} orientations in-plane. The texture was revealed by x-ray diffraction pole figures. The twin symmetry might be caused by a combination effect of the Nb/Al 2 O 3 three-dimensional epitaxial relationship (“3D-Registry” Claassen’s nomenclature) and the “Volmer-Weber” (Island) growth model. However, pole figures obtained by electron backscattering diffraction (EBSD) found no twin symmetry on the thin films’ topmost surface (~50 nm in depth). The EBSD pole figures showed only one Nb{110} crystal plane orientation. Finally, a possible mechanism is suggested to explain the differences between the bulk (XRD) and surface (EBSD) pole figures.

36 MATERIALS SCIENCE↗

The role of the (111) texture on the exchange bias and interlayer coupling effects observed in sputtered NiFe/IrMn/Co trilayers

Magnetic properties of sputtered NiFe/IrMn/Co trilayers grown on different seed layers (Cu or Ta) deposited on Si (100) substrates were investigated by magnetometry and ferromagnetic resonance measurements. Exchange bias effect and magnetic spring behavior have been studied by changing the IrMn thickness. As shown by X-ray diffraction, Ta and Cu seed layers provoke different degrees of (111) fcc-texture that directly affect the exchange bias and indirectly modify the exchange spring coupling behavior. Increasing the IrMn thickness, it was observed that the coupling angle between the Co and NiFe ferromagnetic layers increases for the Cu seed system, but it reduces for the Ta case. The results were explained considering (i) different anisotropies of the Co and IrMn layers induced by the different degree of the (111) texture and (ii) the distinct exchange bias set at the NiFe/IrMn and IrMn/Co interfaces in both systems. The NiFe and Co interlayer coupling angle is strongly correlated with both exchange bias and exchange magnetic spring phenomena. It was also shown that the highest exchange bias field occurs when an unstressed L1{sub 2} IrMn structure is stabilized.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Alternating and direct current field effects on the structure-property relationships in Na{sub 0.5}Bi{sub 0.5}TiO{sub 3}-x%BaTiO{sub 3} textured ceramics

The influence of alternating (ac) and direct current (dc) fields on the structural and dielectric properties of [001]{sub PC} textured Na{sub 0.5}Bi{sub 0.5}TiO{sub 3}-7%BaTiO{sub 3} (NBT-7%BT) ceramics has been investigated. X-ray diffraction measurements revealed that the depolarization at temperature T{sub d} in poled samples resulted from a tetragonal {yields} pseudo-cubic transition on heating. Moderate ac drive and dc bias had opposite influences on T{sub d}: ac drive decreased the T{sub d}, whereas dc bias increased it. These investigations suggested an effective method to expand the working temperature range of NBT-x%BT textured ceramics to a high temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An efficient light trapping scheme based on textured conductive photonic crystal back reflector for performance improvement of amorphous silicon solar cells

An efficient light trapping scheme named as textured conductive photonic crystal (TCPC) has been proposed and then applied as a back-reflector (BR) in n-i-p hydrogenated amorphous silicon (a-Si:H) solar cell. This TCPC BR combined a flat one-dimensional photonic crystal and a randomly textured surface of chemically etched ZnO:Al. Total efficiency enhancement was obtained thanks to the sufficient conductivity, high reflectivity and strong light scattering of the TCPC BR. Unwanted intrinsic losses of surface plasmon modes are avoided. An initial efficiency of 9.66% for a-Si:H solar cell was obtained with short-circuit current density of 14.74 mA/cm{sup 2}, fill factor of 70.3%, and open-circuit voltage of 0.932 V.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Momentum transfer driven textural changes of CeO{sub 2} thin films

The influence of the target erosion depth on the film texture was investigated during DC reactive magnetron sputter deposition of CeO{sub 2} thin films. Three fluxes towards the substrate surface (the relative negative oxygen ion flux, the material flux, and the energy flux) were measured and related to the ongoing erosion of a cerium target. As the deposition rate increased for more eroded targets, both the energy flux and the negative ion flux decreased. Cerium oxide thin films that were deposited at different target erosion states, exhibited a change in preferential crystalline orientation from [200] to [111]. This textural change cannot be explained in terms of the energy per arriving atom concept. Instead, it is shown that the momentum of the high energetic negative ions is an essential condition to clarify the witnessed trends.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly textured oxypnictide superconducting thin films on metal substrates

Highly textured NdFeAs(O,F) thin films have been grown on ion beam assisted deposition-MgO/Y{sub 2}O{sub 3}/Hastelloy substrates by molecular beam epitaxy. The oxypnictide coated conductors showed a superconducting transition temperature (T{sub c}) of 43 K with a self-field critical current density (J{sub c}) of 7.0×10{sup 4} A/cm{sup 2} at 5 K, more than 20 times higher than powder-in-tube processed SmFeAs(O,F) wires. Albeit higher T{sub c} as well as better crystalline quality than Co-doped BaFe{sub 2}As{sub 2} coated conductors, in-field J{sub c} of NdFeAs(O,F) was lower than that of Co-doped BaFe{sub 2}As{sub 2}. These results suggest that grain boundaries in oxypnictides reduce J{sub c} significantly compared to that in Co-doped BaFe{sub 2}As{sub 2} and, hence biaxial texture is necessary for high J{sub c.}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum anomalous Hall effect and a nontrivial spin-texture in ultra-thin films of magnetic topological insulators

We study the evolution of quantum anomalous Hall (QAH) effect for a Z{sub 2} topological insulator (TI) thin films in a proximity induced magnetic phase by a realistic layered k·p model with interlayer coupling. We examine three different magnetic configurations in which ferromagnetic (FM) layer(s) is added either from one side (FM-TI), from both sides (FM-TI-FM), or homogeneously distributed (magnetically doped) in a TI slab. We map out the thickness-dependent topological phase diagram under various experimental conditions. The critical magnetic exchange energy for the emergence of QAH effect in the latter two cases decreases monotonically with increasing number of quintuple layers (QLs), while it becomes surprisingly independent of the film thickness in the former case. The gap size of the emergent QAH insulator depends on the non-magnetic “parent” gap of the TI thin film and is tuned by the FM exchange energy, opening a versatile possibility to achieve room-temperature QAH insulator in various topological nanomaterials. Finally, we find that the emergent spin-texture in the QAH effect is very unconventional, non-“hedgehog” type; and it exhibits a chiral out-of-plane spin-flip texture within the same valence band which is reminiscent of dynamical “skyrmion” pattern, except our results are in the momentum space.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗