SEARCH · Engineering Papers

Results for “TUBING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Review on drop towers and long drop tubes

A drop tube is an enclosure in which a molten sample can be solidified while falling; three such large tubes are currently in existence, all at NASA research facilities, and are engaged in combustion and fluid physics-related experiments rather than in materials research. JPL possesses smaller tubes, one of which can be cryogenically cooled to produce glass and metal microshells. A new small drop tube will soon begin operating at NASA Lewis that is equipped with four high-speed two-color pyrometers spaced equidistantly along the column.

Bayuzick, R. J.↗

NASA NTRS1988

Combined mechanical loading of composite tubes

An analytical/experimental investigation was performed to study the effect of material nonlinearities on the response of composite tubes subjected to combined axial and torsional loading. The effect of residual stresses on subsequent mechanical response was included in the investigation. Experiments were performed on P75/934 graphite-epoxy tubes with a stacking sequence of (15/0/ + or - 10/0/ -15), using pure torsion and combined axial/torsional loading. In the presence of residual stresses, the analytical model predicted a reduction in the initial shear modulus. Experimentally, coupling between axial loading and shear strain was observed in laminated tubes under combined loading. The phenomenon was predicted by the nonlinear analytical model. The experimentally observed linear limit of the global shear response was found to correspond to the analytically predicted first ply failure. Further, the failure of the tubes was found to be path dependent above a critical load level.

Derstine, Mark S.↗

NASA NTRS1988

Development of a 75-watt 60-GHz traveling-wave tube for intersatellite communications

This program covers the initial design and development of a 75 watt, 60 GHz traveling-wave tube for intersatellite communications. The objective frequency band was 59 to 64 GHz, with a minimum tube gain of 35 dB. The objective overall efficiency at saturation was 40 percent. The tube, designated the 961H, used a coupled-cavity interaction circuit with periodic permanent magnet beam focusing to minimize the weight. For efficiency enhancement, it incorporated a four-stage depressed collector capable of radiation cooling in space. The electron gun had a low-temperature (type-M) cathode and an isolated anode. Two tubes were built and tested; one feasibility model with a single-stage collector and one experimental model that incorporated the multistage collector.

Rousseau, A. L.↗

NASA NTRS1989

Thermally-induced stresses in graphite-epoxy tubes coated with aluminum foil

Thermally-induced stresses in the foil, adhesive, and graphite-epoxy layers of composite tubes with aluminum foil bonded to the inner and outer surface are computed. The thermal effects are due to a temperature decrease from the processing temperature of the material to a temperature felt to represent the space environment, the intended operating environment of the tubes. Tubes fabricated from T300/934 and P75s/934 material systems are considered. The results indicate that the presence of the foil and adhesive have no detrimental effect on the stresses in the tube.

Knott, Tamara W.↗

NASA NTRS1989

Energy-absorption capability and scalability of square cross section composite tube specimens

Static crushing tests were conducted on graphite/epoxy and Kevlar/epoxy square cross section tubes to study the influence of specimen geometry on the energy-absorption capability and scalability of composite materials. The tube inside width-to-wall thickness (W/t) ratio was determined to significantly affect the energy-absorption capability of composite materials. As W/t ratio decreases, the energy-absorption capability increases nonlinearly. The energy-absorption capability of Kevlar epoxy tubes was found to be geometrically scalable, but the energy-absorption capability of graphite/epoxy tubes was not geometrically scalable.

Farley, Gary L.↗

NASA NTRS1989

Dynamics of anchored flux tubes in the convection zone. I - Details of the model

A model for the emergence of buoyant segments of magnetic flux tubes whose ends are still anchored in the stable layers below the convection zone is developed. This model is based on the thin flux tube approximation of Spruit. Several specific examples of buoyant flux tube evolution computed with the model are described. In particular, attention is given to an example of a flux tube which results in upflows as it emerges, in contrast to the downflows generally believed to accompany the Parker instability.

Chou, Dean-Yi↗

NASA NTRS1990

Rounding And Aligning Tubes For Butt Welding

Easy-to-use tool helps to ensure solid, reliable joint. Tool similar to automobile-tailpipe expander corrects out-of-roundness in tubes before butt-welded and holds tubes in position during welding. Two tubes rounded and aligned with each other by expansion shoes. After use, shoes retracted so tool withdrawn, even through tube narrower than its mate.

Burley, Richard H.↗

NASA NTRS1990

Observations of reconnected flux tubes within the midaltitude cusp

The paper presents three events interpreted as reconnected flux tubes that correspond to the extensions of FTEs which have penetrated deep into the magnetosphere down to the midaltitudes of the polar cusp. Low-energy plasma, high-energy plasma, magnetic fields, and electric fields are used to identify the signatures of reconnected flux tubes. Characteristics of spatial scale, time duration, and frequency of occurrence between flux transfer events and midaltitude cusp reconnected flux tubes are shown to be consistent, although they differ in the direction of motion. However, the merging cell topology and the interplanetary magnetic field effect can explain this difference. Larger-scale events can be explained by motion of the cusp resulting from a quasi-steady reconnection process. The field-aligned currents associated with reconnected flux tubes at midaltitudes within the cusp are shown to be consistent with twisting of magnetic field lines and with closure by Pedersen currents. It is considered possible that what appears to be field-aligned currents closing by Pedersen ionospheric currents may also be interpreted as currents carried by Alfven waves.

Saflekos, N. A.↗

NASA NTRS1991

An isentropic compression-heated Ludweig tube transient wind tunnel

Theoretical development and experimental results show that the Ludweig tube with isentropic heating (LICH) transient wind tunnel described is a viable means of producing flow conditions that are suitable for a variety of experimental investigations. A complete analysis of the wave dynamics of the pump tube compression process is presented. The LICH tube operating conditions are very steady and run times are greater than those of other types of transient facilities such as shock tubes and gas tunnels. This facility is well suited for producing flow conditions that are dynamically similar to those found in a gas turbine, i.e., transonic Mach number, gas-to-wall temperature ratios of about 1.5, and Reynolds numbers greater than 10 to the 6th.

Magari, Patrick J.↗

NASA NTRS1991

Lunar and Hawaiian lava tubes: Analogs and uses based on terrestrial field data

Presented here is an analysis of the data collected for a large number of Hawaiian lava tubes on the islands of Oahu, Molokai, and Hawaii. The results are extrapolated to lunar conditions. It is argued that lava tubes that formed on the Earth and the Moon are relatively stable over time, as illustrated by the ridigity of the Hawaiian prehistoric lava tubes as well as the historic tubes located in the bombing range near Mauna Loa. These natural structures should be considered for use in planning for the expansion and advanced stages of the future manned lunar base.

Coombs, Cassandra R.↗

NASA NTRS1992

Collapse of composite tubes under end moments

Cylindrical tubes of moderate wall thickness such as those proposed for the original space station truss, may fail due to the gradual collapse of the tube cross section as it distorts under load. Sometimes referred to as the Brazier instability, it is a nonlinear phenomenon. This paper presents an extension of an approximate closed form solution of the collapse of isotropic tubes subject to end moments developed by Reissner in 1959 to include specially orthotropic material. The closed form solution was verified by an extensive nonlinear finite element analysis of the collapse of long tubes under applied end moments for radius to thickness ratios and composite layups in the range proposed for recent space station truss framework designs. The finite element analysis validated the assumption of inextensional deformation of the cylindrical cross section and the approximation of the material as specially orthotropic.

Stockwell, Alan E.↗

NASA NTRS1990

A review of pulse tube refrigeration

This paper reviews the development of the three types of pulse tube refrigerators: basic, resonant, and orifice types. The principles of operation are given. It is shown that the pulse tube refrigerator is a variation of the Stirling-cycle refrigerator, where the moving displacer is substituted by a heat transfer mechanism or by an orifice to bring about the proper phase shifts between pressure and mass flow rate. A harmonic analysis with phasors is described which gives reasonable results for the refrigeration power, yet is simple enough to make clear the processes which give rise to the refrigeration. The efficiency and refrigeration power are compared with those of other refrigeration cycles. A brief review is given of the research being done at various laboratories on both one- and two-stage pulse tubes. A preliminary assessment of the role of pulse tube refrigerators is discussed.

Radebaugh, Ray↗

NASA NTRS1990

Effect of microstructure on the response of composite tubes

This paper addresses the effects of changes in the fiber content in the individual layers of a composite tube and the presence of resin-rich interplay regions on the torsional response of the tube. A micromechanics-based procedure is outlined to correct the properties of unidirectional graphite/epoxy obtained from flat coupon tests in order to account for the lower fiber volume fraction in the individual layers of a composite tube made from the same material. The corrected properties are used as input parameters to an analytical model developed to predict the response of composite tubes subjected to combined axial/torsion loading. It is illustrated that when the corrected properties and the resin-rich regions are included in the analysis, good correlation with experimental data is obtained.

Derstine, M. S.↗

NASA NTRS1992

Structure of sunspot penumbrae - Fallen magnetic flux tubes

A model is presented of a sunspot penumbra involving magnetic flux tubes that have fallen into the photosphere and float there. An upwelling at the inner end of a fallen tube continuously provides additional gas. This gas flows along and lengthens the tube and is observable as the Evershed flow. Fallen flux tubes may appear as bright streaks near the upwelling, but they become dark filaments further out. The model is corroborated by recent optical high-resolution magnetic data regarding the penumbral filaments, by the 12-micron magnetic measurements relevant to the height of the temperature minimum, and by photographs of the umbra/penumbra boundary.

Wentzel, Donat G.↗

NASA NTRS1990

The structure of photospheric flux tubes

Basic physical mechanisms for producing the observed intense magnetic flux tubes in the solar photosphere are reviewed. The mechanism of flux expulsion by convective cells can concentrate magnetic flux up to the equipartition field strength, which is only about 200 G at the solar surface for the observed granular convection. Other mechanisms that partially evacuate the flux tube are needed to produce further concentration of magnetic flux to the observed values of 1000-1500 G. Two such mechanisms are discussed: concentration by convective collapse of a vertical flux tube in the superadiabatic layer just below the solar surface, and concentration by a siphon flow in an arched, isolated flux tube.

Thomas, John H.↗

NASA NTRS1992

Plasma dynamics on current-carrying magnetic flux tubes. II - Low potential simulation

The evolution of plasma in a current-carrying magnetic flux tube of variable cross section is investigated using a one-dimensional numerical simulation. The flux tube is narrow at the two ends and broad in the middle. The middle part of the flux tube is loaded with a hot, magnetically trapped population, and the two ends have a more dense, gravitationally bound population. A potential difference larger than the gravitational potential but less than the energy of the hot population is applied across the domain. The general result is that the potential change becomes distributed along the anode half of the domain, with negligible potential change on the cathode half. The potential is supported by the mirror force of magnetically trapped particles. The simulations show a steady depletion of plasma on the anode side of the flux tube. The current steadily decreases on a time scale of an ion transit time. The results may provide an explanation for the observed plasma depletions on auroral field lines carrying upward currents.

Swift, Daniel W.↗

NASA NTRS1992

Crushing characteristics of composite tubes with 'near-elliptical' cross sections

An experimental investigation was conducted to determine whether the energy-absorption capability of near-elliptical cross-section composite tubular specimens is a function of included angle. Each half of the near-elliptical cross-section tube is a segment of a circle. The included angle is the angle created by radial lines extending from the center of the circular segment to the ends of the circular segment. Graphite- and Kevlar-reinforced epoxy material was used to fabricate specimens. Tube internal diameters were 2.54, 3.81, and 7.62 cm, and included angles were 180, 160, 135, and 90 degrees. Based upon the test results from these tubes, energy-absorption capability increased between 10 and 30 percent as included angle decreased between 180 and 90 degrees for the materials evaluated. Energy-absorption capability was a decreasing nonlinear function of the ratio of tube internal diameter to wall thickness.

Farley, Gary L.↗

NASA NTRS1993

Cheaper Fabrication Of Tube-Wall Components

Relatively inexpensive method of forming metal tubes into wall component devised. One initially selects ordinary, imprecisely dimensioned tubes having passed both pressure test and inspections for wall thickness and surface imperfections, and tubes bonded to each other in shorter, simpler procedure. Eliminates need for progressive die forming and attendant inspections after forming steps. Also applicable in fabrication of heat exchangers and other unitary assemblies of tubes.

Bales, Daniel A.↗