Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TOXICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Elimination of toxicity from polyurethane foam plugs used for plant culture

Polyurethane foam plugs commonly are used as collars or supports to grow plants in solution culture. Despite their utility, these foam plugs can be quite toxic to plants, particularly to small seedlings. We have observed tissue injury in tests using plugs to support lettuce, red beet, and potato plants in solution culture. Typically, the injury is initiated on the hypocotyl or stem tissue in direct contact with the foam, and appears within 30 hr as a brownish discoloration on the tissue surface. This discoloration can be followed by complete collapse of affected tissue and eventual death of the seedling. When injury does not progress beyond surface browning, the seedling survives but growth is slowed. In this paper, we report on different treatments that can be used to remove the toxicity of these plugs so they can be used in plant research.

Non-NASA Center↗
NASA NTRS2005

A Brief Study on Toxic Combustion Products of the Polymers Used in High-Pressure Oxygen Systems

One likely cause of polymer ignition in a high-pressure oxygen system is the adiabatic-compression heating of polymers caused by pneumatic impact. Oxidative pyrolysis or combustion of polymers in a high-pressure oxygen system could generate toxic gases. This paper investigates the feasibility of using the NASA pneumatic-impact system to conduct adiabatic-compression combustion tests and determines the toxic combustion products produced from the burning of five selected polymers. Five polymers commonly used in high-pressure oxygen systems, Zytel(Registered TradeMark) 42 (Nylon 6/6), Buna N (nitrile rubber), Witon(Registered TradeMark) A (copolymer of vinylidene fluoride and hexafluoropropylene), Neoflon(Registered TradeMark) (polychlorotrifluoroethylene), and Teflon(Registered TradeMark) (polytetrafluoroethylene), were tested in the NASA pneumatic-impact test system at 17.2-MPa oxygen pressure. The polymers were ignited and burned; combustion products were collected in a stainless-steel sample bottle and analyzed using various methods. The results show that the NASA pneumatic-impact system is an appropriate test system to conduct adiabatic-compression combustion tests and to collect combustion products for further chemical analysis. The composition of the combustion product gas generated from burning the five selected polymers are presented and discussed.

Hshieh, Fu-Yu↗
NASA NTRS2006

Demonstration of a Non-Toxic Reaction Control Engine

Three non-toxic demonstration reaction control engines (RCE) were successfully tested at the Aerojet Sacramento facility under a technology contract sponsored by the National Aeronautics and Space Administration s (NASA) Marshall Space Flight Center (MSFC). The goals of the NASA MSFC contract (NAS8-01109) were to develop and expand the technical maturity of a non-toxic, on-orbit auxiliary propulsion system (APS) thruster under the auspices of the Exploration Systems Mission Directorate. The demonstration engine utilized Liquid Oxygen (LOX) and Ethanol as propellants to produce 870 lbf thrust. The Aerojet RCE s were successfully acceptance tested over a broad range of operating conditions. Steady state tests evaluated engine response to varying chamber pressures and mixture ratios. In addition to the steady state tests, a variety of pulsing tests were conducted over a wide range of electrical pulse widths (EPW). Each EPW condition was also tested over a range of percent duty cycles (DC), and bit impulse and pulsing specific impulse were determined for each of these conditions. White Sands Test Facility (WSTF) in April 2005 for incorporation into a cryogenic Auxiliary Propulsion System Test Bed (APSTB). The APSTB is a test article that will be utilized in an altitude test cell to simulate anticipated mission applications. The objectives of this APSTB testing included evaluation of engine performance over an extended duty cycle map of propellant pressure and temperature, as well as engine and system performance at typical mission duty cycles over extended periods of time. This paper provides acceptance test results and a status of the engine performance as part of the system level testing. Subsequent to acceptance testing at Aerojet, these three engines were delivered to the NASA

Robinson, Philip J.↗
NASA NTRS2007

Toxicity of Carbon Nanotubes and its Implications for Occupational and Environmental Health

This viewgraph document reviews the sources of Nano particles in the environment, the structure and properties of Carbon Nanotubes (CNTs), the physical characteristics of CNT materials, pulmonary and other health concerns of exposure to CNTs. The toxicity of CNT in rodents is summarized and some natural, and man-made sources of CNTs are shown. CNTs are electrically and thermally conductive, fibrous, biopersistent and very complicated in structures. The factors affecting toxicity of CNTs are more than size and surface area.

Lam, Chiu-wing↗
NASA NTRS2007

Demonstration of a Non-Toxic Reaction Control Engine

T:hree non-toxic demonstration reaction control engines (RCE) were successfully tested at the Aerojet Sacramento facility under a technology contract sponsored by the National Aeronautics and Space Administration's (NASA) Marshall Space Flight Center (MSFC). The goals of the NASA MSFC contract (NAS8-01109) were to develop and expand the technical maturity of a non-toxic, on-orbit auxiliary propulsion system (APS) thruster under the auspices of the Exploration Systems Mission Directorate. The demonstration engine utilized Liquid Oxygen (LOX) and Ethanol as propellants to produce 870 lbf thrust. The Aerojet RCE's were successfully acceptance tested over a broad range of operating conditions. Steady state tests evaluated engine response to varying chamber pressures and mixture ratios. In addition to the steady state tests, a variety of pulsing tests were conducted over a wide range of electrical pulse widths (EPW). Each EPW condition was also tested over a range of percent duty cycles (DC), and bit impulse and pulsing specific impulse were determined for each of these conditions. Subsequent to acceptance testing at Aerojet, these three engines were delivered to the NASA White Sands Test Facility (WSTF) in April 2005 for incorporation into a cryogenic Auxiliary Propulsion System Test Bed (APSTB). The APSTB is a test article that will be utilized in an altitude test cell to simulate anticipated mission applications. The objectives of this APSTB testing included evaluation of engine performance over an extended duty cycle map of propellant pressure and temperature, as well as engine and system performance at typical mission duty cycles over extended periods of time. This paper provides acceptance test results and a status of the engine performance as part of the system level testing.

Robinson, Philip J.↗
NASA NTRS2002

Toxicity of Carbon Nanotubes in the Lungs of Mice 7 and 90 Days After Intratracheal Instillation

Single-walled carbon nanotubes have many potential applications in the electronic, computer, and aerospace industries. Because unprocessed nanotubes could become airborne and potentially reach the lungs, their pulmonary toxicity was investigated. The three products studied were made by different methods, and contained different types and amounts of residual catalytic metals. Mice were each intratracheally instilled once with 0,0.1 or 0.5 mg of nanotubes, a carbon black negative control, or a quartz positive control, and killed for histopathological study 7 d or 90 d after the treatment. All nanotube products induced epithelioid granulomas and, in some cases, interstitial inflammation in the animals of the 7 -d groups. These lesions persisted and were worse in the 90-d groups. We found that, if nanotubes reach the lung, they can be more toxic than quartz, which is considered a serious occupational health hazard in chronic inhalation exposures.

Lam, Chiu-Wing↗
NASA NTRS2003

Less-Toxic Coatings for Inhibiting Corrosion of Aluminum

Two recently invented families of conversion- coating processes have been found to be effective in reducing or preventing corrosion of aluminum alloys. These processes offer less-toxic alternatives to prior conversion-coating processes that are highly effective but have fallen out of favor because they generate chromate wastes, which are toxic and carcinogenic. Specimens subjected to these processes were found to perform well in standard salt-fog corrosion tests.

Minevski, Zoran↗
NASA NTRS2005

A Portable Electronic Nose for Toxic Vapor Detection, Identification, and Quantification

The Space Program and military use large quantities of hydrazine and monomethyl hydrazine as rocket propellant, which are very toxic and suspected human carcinogens. Current off-the-shelf portable instruments require 10 to 20 minutes of exposure to detect these compounds at the minimum required concentrations and are prone to false positives, making them unacceptable for many operations. In addition, post-mission analyses of grab bag air samples from the Shuttle have confirmed the occasional presence of on-board volatile organic contaminants, which also need to be monitored to ensure crew safety. A new prototype instrument based on electronic nose (e-nose) technology has demonstrated the ability to qualify (identify) and quantify many of these vapors at their minimum required concentrations, and may easily be adapted to detect many other toxic vapors. To do this, it was necessary to develop algorithms to classify unknown vapors, recognize when a vapor is not any of the vapors of interest, and estimate the concentrations of the contaminants. This paper describes the design of the portable e-nose instrument, test equipment setup, test protocols, pattern recognition algorithms, concentration estimation methods, and laboratory test results.

Linnell, B. R.↗
NASA NTRS2012

Non-Toxic, Low-Freezing, Drop-In Replacement Heat Transfer Fluids

A non-toxic, non-flammable, low-freezing heat transfer fluid is being developed for drop-in replacement within current and future heat transfer loops currently using water or alcohol-based coolants. Numerous water-soluble compounds were down-selected and screened for toxicological, physical, chemical, compatibility, thermodynamic, and heat transfer properties. Two fluids were developed, one with a freezing point near 0 C, and one with a suppressed freezing point. Both fluids contain an additive package to improve material compatibility and microbial resistance. The optimized sub-zero solution had a freezing point of 30 C, and a freezing volume expansion of 10-percent of water. The toxicity of the solutions was experimentally determined as LD(50) greater than 5g/kg. The solutions were found to produce minimal corrosion with materials identified by NASA as potentially existing in secondary cooling loops. Thermal/hydrodynamic performance exceeded that of glycol-based fluids with comparable freezing points for temperatures Tf greater than 20 C. The additive package was demonstrated as a buffering agent to compensate for CO2 absorption, and to prevent microbial growth. The optimized solutions were determined to have physically/chemically stable shelf lives for freeze/thaw cycles and longterm test loop tests.

Cutbirth, J. Michael↗
NASA NTRS2020

Guidelines for Assessing the Toxic Hazard of Spacecraft Chemicals and Test Materials

This document describes the criteria and procedural guidelines used by the NASA/JSC Toxicology Office (JSCSTO), to perform toxicological evaluations. The JSCSTO is responsible for conducting toxicological assessments and assigning toxic hazard levels (THLs) for essentially all chemicals and test materials to be used in or transported to the habitable areas of U.S. spacecraft, non‐U.S. spacecraft inhabitaed by U.S. crew members or habitable areas of off‐Earth habitats where U.S. crew members would be present, including chemicals carried by visiting spacecraft(visiting vehicles) to and from the International Space Station (ISS). Biohazard assessments for biological materials used in payload experiments are performed by the NASA Biosafety Review Board. Radioactive materials are assessed by the Space Radiation Analysis Group for radiation hazards; the flammability rating on flammable materials is assessed by the JSC Materials and Processes Branch, ES4. This document will focus on the assessment of chemically‐induced toxicity hazards. The toxicological assessments, together with assessments on radioactive, biological, physical, and flammability hazards, are incorporated into a mission‐specific Hazardous Materials Summary Table (HMST).

Valerie Elizabeth Ryder↗
DOE OSTI2012

Nanoparticles Formed from Bacterial Oxyanion Reduction of Toxic Group 15 and Group 16 Metalloids

Environmental Significance of Group 15 and 16 Toxic Metalloids Selenium, tellurium, and arsenic are present naturally in aquatic and terrestrial environments and share many similar biogeochemical characteristics. These elements are released into the environment through the weathering and decomposition of minerals contained within a variety of lithologies, with slow release rates resulting in low environmental concentrations. Selenium, tellurium, and arsenic occur in several oxidation states as oxyanions (e.g., selenate [SeO4 2], selenite [SeO3 2], tellurate [TeO4 2], tellurite [TeO3 2], arsenate [HAsO4 2], and arsenite [HAsO3 2]) in their native elemental states [e.g., Se(0), Te(0)] or in their most reduced states as selenide (-II) and telluride (-II) or arsenide/arsines (-III). These elements can be methylated through microbial activity to form compounds such as dimethylselenide (Ehrlich, 2002; Masscheleyn, et al., 1990), dimethyltelluride (Basnayake, et al., 2001; Fleming and Alexander, 1972), and methylarsonous acid (Dopp, et al., 2004) as well as a variety of toxic methylated arsine gases (Yuan, et al., 2008). These elements are also found as analogues of sulfurous proteins such as selenocysteine and selenomethionine (Bock, et al., 1991; Jones, et al., 1979; Stolz, et al., 2006; Zannoni, et al., 2008), tellurocysteine, telluromethionine (Zannoni, et al., 2008), and the arsenic-containing amino acid, arsenomethionine (Dembitsky and Levitsky, 2004).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Toxicity of Common Fluoropolymers and PFAS on C. Elegans and an Innovative Strategy to Promote in Situ Remediation - 26128

Per- and polyfluoroalkyl substances (PFAS) are a broad class of synthetic chemicals used in a variety of modern technologies and consumer products. PFAS have an alkyl backbone with all or most of the hydrogen (H) atoms replaced with fluorine (F) atoms. PFAS generally fall into one of two categories, they can be non-polymeric with relatively low molecular weights, or long-chain polymers. PFAS are a diverse group of organic compounds that can be solids, liquids, dispersions, or gases. Their mobility and toxicity are influenced by their chain lengths and functional groups. Non-polymeric PFAS are common building blocks for the manufacturing of fluoropolymers. Non-polymeric PFAS are known to be mobile in the environment and some are considered contaminants of emerging concern. Polymeric PFAS, or fluoropolymers, are typically thought to be of low concern, however few systematic investigations into their toxicity have been completed. PFAS, including fluoropolymers and microplastics, have been found in pristine environments and animals located far from site of origin including the arctic and deep ocean.

Jacobs, Stephanie [Savannah River National Laborat↗
DOE OSTI2019

Deactivation and Demolition (D and D) of the Toxic Substance Control Act (TSCA) Incinerator Oak Ridge, Tennessee - 19184

UCOR, an AECOM-led partnership with Jacobs, manages the cleanup of the 2,200-acre East Tennessee Technology Park for its client, the U.S. Department of Energy (DOE), in Oak Ridge, Tennessee. The site was contaminated with radioactive, hazardous and industrial wastes generated by more than 40 years of national defense and energy missions. In 1989, the U.S. Environmental Protection Agency (EPA) added the Oak Ridge Reservation to the National Priorities List of sites and facilities that pose a sufficient threat to human health or the environment to warrant cleanup. The U.S. Department of Energy is cleaning up the Oak Ridge Reservation under a Federal Facility Agreement with the EPA and the Tennessee Department of Environment and Conservation. Many types of waste have been managed and disposed as part of the multi-decade cleanup effort. One unique facility, the Toxic Substance Control Act (TSCA) Incinerator, was constructed at the Department of Energy's Est Tennessee Technology Park (ETTP) in Oak Ridge, Tennessee. The Incinerator was constructed in the mid-1980's and underwent a series of test burns and readiness reviews to obtain the necessary environmental permits and operating approvals from state and federal regulatory agencies. With these in place, the incinerator began routine operations in 1991. It was designed and permitted for receiving, sorting, storing, preparing, and thermally destroying low-level radioactive and RCRA mixed waste contaminated with PCBs. The incinerator was named after a law passed in 1976 that provides the U.S. Environmental Protection Agency with authority to require reporting, record-keeping, testing, and restrictions relating to chemical substances and/or mixtures. During its operating lifetime, the one-of-a-kind thermal treatment facility burned materials regulated under TSCA and the Resource Conservation and Recovery Act (RCRA), most notably radiologically-contaminated polychlorinated biphenyls (PCBs). The TSCA Incinerator met or exceeded environmental regulations and DOE requirements for the treatment of these types of wastes. After more than 18 years of operation and more than 35 million pounds of waste safely incinerated, the TSCA Incinerator shut down operations on December 2, 2009. The TSCA Incinerator has been called a national resource for DOE sites from coast to coast. As the only U.S. facility permitted to incinerate specialized types of wastes, it not only accepted material from the Oak Ridge Reservation but also other facilities across the nationwide DOE complex. Over the years, a dynamic team of hard working and talented people operated and maintained the facility under the most stringent environmental permits and site requirements. The facility has played a key role in the treatment of radioactive PCB and hazardous wastes (mixed wastes) from the Oak Ridge Reservation, as well as from other facilities across the DOE complex. Through its support to over 20 sites in the DOE complex, environmental waste from past and ongoing operations has been safely and permanently treated. In the years since it was shut down, deactivation workers have been preparing TSCA for demolition. This work scope included triple cleaning, rinsing of all production equipment and tanks to RCRA clean criteria, filling sumps, encapsulating PCB and radioactive contamination, removal of universal waste (asbestos. lead and mercury), draining and disposal of residual water in tanks and transfer piping, and removing and disposing of carbon vessels, which were part of the water management system. In 2018, the facility was successfully deactivated and demolished, permanently removing one of the most unique facilities in the DOE complex. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2011

A novel nanoparticle-based disposable electrochemical immunosensor for diagnosis of exposure to toxic organophosphorus agents

We present a novel disposable electrochemical immunosensor for highly selective and sensitive detection of organophosphorylated butyrylcholinesterase (OP-BChE), a specific biomarker for exposure to toxic organophosphorus agents. In our new approach, the zirconia nanoparticles (ZrO-2) were employed to selectively capture the OP moiety of OP-BChE adducts, and followed by quantum dot (QD)-tagged anti-BChE antibodies for amplified quantification. The captured CdSe-QD tags can be sensitively detected by stripping voltammetry using in situ bismuth-plating method. The OP agent, diisopropylfluorophosphate (DFP), was selected to prepare OP-BChE adducts in various matrices. The formation of OP-BChE adducts in plasma sample was confirmed using mass spectroscopy. The developed electrochemical immunosensor demonstrates a highly linear voltammetric response over the range of 0.1 to 30 nM OP-BChE. Moreover, the immunosensor has been successfully applied for the detection of OP-BChE adducts in the plasma samples. This novel nanoparticle-based electrochemical immunosensor thus provides an alternative way for designing simple, fast, sensitive, and cost-effective sensing platform for on-site screening/evaluating exposure to a variety of OP agents.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2019

Is Hyalella azteca a Suitable Model Leaf-Shredding Benthic Crustacean for Testing the Toxicity of Sediment-Associated Metals in Europe?

The leaf-shredding crustacean Hyalella azteca, which is indigenous to Northern and Central America, is used to assess environmental risks associated with (metal-)contaminated sediments and to propose sediment quality standards also in Europe. Yet, it is unknown if H. azteca is protective for European crustacean shredders. We thus compared the sensitivity of H. azteca with that of the European species Asellus aquaticus and Gammarus fossarum towards copper- and cadmium-contaminated sediments (prepared according to OECD 218) under laboratory conditions employing mortality and leaf consumption as endpoints. H. azteca either reacted approximately fourfold more sensitive than the most tolerant tested species (as for cadmium) or its sensitivity was only 1.6 times lower than the highest sensitivity determined (as for copper), which should be covered by safety factors applied during risk assessments. Therefore, the results for the sediment type and the two heavy metals tested during the present study in combination with the existence of standardized testing protocols, their ease of culture, and short generation time, suggest H. azteca as suitable crustacean model shredder for assessing the toxicity of sediment-associated metals in Europe.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Spectral Methods of Remote-Sensing Monitoring of Radioactive Substances and Toxic Chemicals

The physical principles of passive and active methods of remote-sensing monitoring of radioactive substances and toxic chemicals in accidental emissions (leaks) at nuclear fuel cycle objects are examined. The analytical possibilities of the most sensitive methods of remote-sensing monitoring, which are based on the advances made in UV and microwave range radiometry, laser IR-absorption spectroscopy, laser-induced fluorescence, and laser spark emission spectrometry, are discussed. The prospects for the development of spectral methods of remote-sensing monitoring in different ranges are analyzed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2019

Association of lenvatinib trough plasma concentrations with lenvatinib-induced toxicities in Japanese patients with thyroid cancer

The aim of this study was to examine the association of lenvatinib-induced adverse events with the trough plasma concentration (C{sub 0}) in Japanese patients with thyroid cancer. Patients received lenvatinib 24 mg as an initial dose, and sequential dose reductions were conducted based on the grade of each side effect. Assessment of adverse events, assay of lenvatinib C{sub 0}, and analysis of clinical laboratory tests were performed at the same time of day and were retrospectively analyzed. There were no significant differences in lenvatinib C{sub 0} among grades of hypertension, proteinuria, hand-foot syndrome, and diarrhea. However, levels of aspartate transaminase, alanine transaminase, and total bilirubin were significantly higher in lenvatinib C{sub 0} quartile (Q) 4 (≥ 88 ng/mL) than in Q1 (< 42 ng/mL) and Q2–3 (42–88 ng/mL). Additionally, platelet counts were highest in the lowest Q1 group. The median dose of lenvatinib in patients with UGT1A1*6/*6 or *6/*28 (poor metabolizers [PMs]) was significantly lower than that in patients with UGT1A1*1/*1 (10 and 14 mg, respectively), whereas the median bilirubin levels were significant higher in UGT1A1 PMs (0.9 and 0.5 mg/dL, respectively). There were no significant differences in median lenvatinib C{sub 0} values between patients with UGT1A1*1/*1 and PMs (58.0 and 50.0 ng/mL, respectively). The threshold between the C{sub 0} and toxicity of lenvatinib may be more than 88 ng/mL. Therefore, the dose of lenvatinib could be controlled to maintain a lower C{sub 0} of less than 88 ng/mL. The target C{sub 0} for lenvatinib as the threshold between the C{sub 0} and optimal response may be in the range from 42 to 88 ng/mL; however, further studies are necessary.

62 RADIOLOGY AND NUCLEAR MEDICINE↗